This fixes segfault that was caused by changing settings in
FirstStartWidget that triggered change event on not fully intialized
StartView.
It is quick and dirty fix that just disables handling of the event
causing segfault until widget is fully ready. The correct solution would
be to remove the logic that changes settings from the widget (as it
should not be there) and instad move it to another place in pipeline.
This would be however much more work and segfault should be fixed ASAP.
Update TSP tunnel solver to match revised Pythonlogic, including
improved early exit, open-ended route handling, and performance tweaks.
Also ensure extra data in tunnel dictionaries is preserved through the
C++/Python interface and add a test for passthrough of extra keys.
src/Mod/CAM/App/tsp_solver.cpp:
- Refactor optimization loop to use lastImprovementAtStep and limit
variables
- Add special handling for open-ended routes (no end point)
- Change epsilon to 10e-6 for consistency with Python
- Cache distance calculations for relocation step
src/Mod/CAM/App/tsp_solver_pybind.cpp:
- Preserve extra keys from input tunnel dicts in output
- Set tunnel index for passthrough
src/Mod/CAM/CAMTests/TestTSPSolver.py:
- Add test to verify extra data in tunnel dicts is preserved through
TSP solver
- Print extra data for debugging
Ensures that all extra keys in tunnel dictionaries are preserved after
TSP solving by copying the original input dict and updating solver
results. Adds a dedicated test to verify passthrough of extra data and
prints extra keys for debugging.
src/Mod/CAM/App/tsp_solver_pybind.cpp:
- Copy original tunnel dict and update with solver results to preserve extra keys
src/Mod/CAM/CAMTests/TestTSPSolver.py:
- Add test_09_tunnels_extra_data_passthrough to verify extra data preservation
- Print extra tunnel data in print_tunnels for easier debugging
The 'old' DiffuseColor comes in 2 flavors. In v0.21.2 it stores transparency values. In v1.0.2 and v1.1 it stores alpha values. The ArchReference code should handle both. DiffuseColor is still used by BuildingParts in v1.0.2 and v1.1.
The solution is a bit hacky: if 100% transparency occurs we assume we are actually dealing with alpha values.
This is a hacky fix for https://github.com/FreeCAD/FreeCAD/issues/23607
Basically after widget is shown or polished we enforce it's minimum size to at
least cover the minimum size hint - something that QSS ignores if min-width is
specified.
This introduces much faster CenterOfMassProvider#supports method that
can be used as cheap pre-check to see if the object supplied could have
the center of mass and so delay the domputation to a moment where it is
actually needed.
Added extensive test coverage for the TSP tunnel solver including linear
tunnels, pentagram diagonals, and complex wire geometries with various
constraint combinations. Introduced a Python wrapper function for
tunnel sorting that integrates with the C++ solver.
src/Mod/CAM/CAMTests/TestTSPSolver.py:
- Renumbered existing tests to run in sequential order
(test_01_simple_tsp, test_02_start_point, etc.)
- Added print_tunnels() helper function for displaying tunnel
information with original indices
- Added test_06_tunnels_tsp: Tests 7 linear tunnels with varying
lengths, connectivity, and flipping behavior
- Added test_07_pentagram_tunnels_tsp: Tests pentagram diagonal tunnels
with no constraints, start+end constraints, and start-only constraints
- Added test_08_open_wire_end_only: Tests end-only constraint on complex
wire with 8 tunnels including crossings and diagonals
src/Mod/CAM/PathScripts/PathUtils.py:
- Added sort_tunnels_tsp() wrapper function that interfaces with the C++
tsp_solver.solveTunnels()
- Supports allowFlipping, routeStartPoint, and routeEndPoint parameters
This is a quick and dirty fix for https://github.com/FreeCAD/FreeCAD/issues/22010
Basically if we want to use a bigger marker size than available, we use the biggest one
available. This is not a good way to fix the issue - we should ensure that the marker
size that the user requests is actually available - this, however, requires more
significant changes to the code.
Introduce TSPTunnel struct and implement TSPSolver::solveTunnels
for optimizing tunnel order with support for flipping and start/end points.
Expose the new functionality to Python via pybind11, returning tunnel
dictionaries with flipped status.
src/Mod/CAM/App/tsp_solver.cpp:
- Add solveTunnels implementation for tunnel TSP with flipping and route endpoints
src/Mod/CAM/App/tsp_solver.h:
- Define TSPTunnel struct
- Declare solveTunnels static method in TSPSolver
src/Mod/CAM/App/tsp_solver_pybind.cpp:
- Add Python wrapper for solveTunnels
- Expose solveTunnels to Python with argument parsing and result conversion
* BIM: BIM Report MVP
* BIM: add Arch.selectObjects() API call and tests
* BIM: adopted ArchSchedule spreadsheet update and linking patterns
* BIM: SELECT with dynamic headers and dynamic data population
* BIM: fix deletion, dependencies, and serialization issues
* BIM: transition from individual query to multiple-query statements
* BIM: Mostly fix serialization issues
* BIM: Report editor UI/UX improvements
- Make edits directly on table (Description field only, for now)
- Sync table edits with query editor (Description field only, for now)
- Fix Property group name for spreadsheet object
- Add tooltips for all task panel widgets
- Put Description input and label on the same row
- Edit statement is now a static title
- Open report editor upon creation
- Remove overview table's redundant edit button
- Put report query options in a box
- Open spreadsheet after accepting report changes
* BIM: Aggregarion and grouping - implement GROUP BY with COUNT(*)
* BIM: Aggregation and grouping - implement SUM, MIN, MAX functions
* BIM: Aggregation and grouping - implement validation
* BIM: add reporting presets support
* BIM: align description and query preset inputs vertically
* BIM: write units on their own spreadsheet cell
* BIM: update test suite to new SQL engine behaviour
* BIM: fix various bugs: return values should not be stringized, non-grouped query with mixed extractors, handle nested properties
* BIM: expand Report test suite, fix property count vs count all bug
* BIM: add report engine SQL's IN clause support
* BIM: enable running Report presets tests from the build directory
* BIM: make spreadsheet more useful for analysis, units on headers
* BIM: update BIM Report icons
* BIM: Add key option columns to report overview table
* BIM: add syntax highlighting support to report query editor
* BIM: Add lark build dependency for SQL parser generator
* BIM: Install the generated parser
* BIM: implement TYPE() function
* BIM: simplify function registry, make it OOP
* BIM: add CHILDREN function
* BIM: improve SQL engine error descriptions
* BIM: Implement ORDER BY clause
* BIM: Implement column aliasing (AS...)
* BIM: improve error reporting to pinpoint exact token names
* BIM: implement CONCAT, LOWER, UPPER functions. Improve exception handling
* BIM: refactor to improve initialization readability and maintenance
* BIM: Improve query editor syntax highlighting
* BIM: Address CodeQL warnings
* BIM: Enable scalar functions in WHERE clause and refactor transformer
- Enable the use of scalar functions (e.g., `LOWER`, `TYPE`) in `WHERE` clause comparisons.
- Refactor the Lark transformer to correctly handle `NUMBER`, `NULL`, and `ASTERISK` terminals using dedicated methods.
- Refactor error handling to raise a custom `BimSqlSyntaxError` exception instead of returning values on failure.
- Improve syntax error messages to be more specific and user-friendly by inspecting the failing token.
- Fix regressions in `AggregateFunction` and `TypeFunction` handling that were introduced during the refactoring.
- Update the test suite to assert for specific exceptions, aligning with the new error handling API.
* BIM: Implement arithmetic operations in SELECT clause
- Update grammar with `expr`, `term`, and `factor` rules to support operator precedence.
- Introduce `ArithmeticOperation` class to represent calculations as a recursive tree.
- Add transformer methods to build the calculation tree from the grammar rules.
- Implement recursive evaluation that correctly normalizes `Quantity` and `float` types before calculation.
* BIM: Add CONVERT() function for unit conversions
- Implement a new ConvertFunction class to handle unit conversions in the SELECT clause.
- Leverage the core Quantity.getValueAs() FreeCAD API method to perform the conversion logic.
- Add a unit test to verify both successful conversions and graceful failure on incompatible units.
* BIM: add self-documenting supported SQL syntax helper
* BIM: document internal and external API functions
* BIM: Finalize and rename public ArchSql API, update all consumers
- Rename public API functions for clarity and consistency
(run_query_for_objects -> select, get_sql_keywords -> getSqlKeywords,
etc.).
- Establish Arch.py as the official API facade by exposing all public
SQL functions and exceptions via a safe wildcard import from ArchSql,
governed by __all__.
- Refactor all consumers (ArchReport.py, bimtests/TestArchReport.py) to
use the new function names and access the API exclusively through the
Arch facade (e.g., Arch.select).
- Finalize the error handling architecture:
- Arch.select now logs and re-raises exceptions for consumers to
handle.
- Arch.count remains "safe," catching exceptions and returning an
error tuple for the UI.
- Refactor the test suite to correctly assert the behavior of the new
"unsafe" (select) and "safe" (count) APIs, including verifying
specific exception messages.
* BIM: add results preview on demand on the query editor
* BIM: add documentation quick reference button
* BIM: Handle query errors gracefully in Report preview UI
Refactor the SQL engine's error handling to improve the Report preview
UI. Invalid queries from the "Preview Results" button no longer print
tracebacks to the console. Instead, errors are now caught and displayed
contextually within the preview table, providing clear feedback without
console noise.
- `ArchSql.select()` no longer logs errors to the console; it now only
raises a specific exception on failure, delegating handling to the
caller.
- The `ReportTaskPanel`'s preview button handler now wraps its call to
`Arch.select()` in a `try...except` block.
- Caught exceptions are formatted and displayed in the preview table
widget.
- Add new unit test
* BIM: consolidate internal API into a more semantically and functionally meaningful function
* BIM: Implement two-phase execution for SQL engine performance
Refactors the ArchSql engine to improve performance and internal API
semantics. The `Arch.count()` function, used for UI validation, now
executes faster by avoiding unnecessary data extraction.
This is achieved by splitting query execution into two phases. The first
phase performs fast filtering and grouping (`FROM`/`WHERE`/`GROUP BY`).
The second, slower phase processes the `SELECT` columns. The
`Arch.count()` function now only runs the first phase, while
`Arch.select()` runs both.
- Introduces `_run_query(query_string, mode)` as the mode-driven
internal entry point for the SQL engine
- The `SelectStatement` class is refactored with new internal methods:
`_get_grouped_data()` (Phase 1) and `_process_select_columns()`
(Phase 2).
- `Arch.count()` now uses a fast path that includes a "sample execution"
on a single object to correctly validate the full query without
performance loss.
- The internal `execute()` method of `SelectStatement` is now a
coordinator for the two-phase process.
* BIM: Implement autocompletion in Report SQL editor
Introduces an autocompletion feature for the SQL query editor in the BIM
Report task panel. The completer suggests SQL keywords, functions, and
property names to improve query writing speed and accuracy.
- Adds a custom `SqlQueryEditor` subclass that manages all
autocompletion logic within its `keyPressEvent`.
- The completion model is populated with static SQL keywords and
functions, plus all unique top-level property names dynamically
scanned from every object in the document.
- A blocklist is used to filter out common non-queryable properties
(e.g., `Visibility`, `Proxy`) from the suggestions.
- The editor manually calculates the completer popup's width based on
content (`sizeHintForColumn`) to resolve a Qt rendering issue and
ensure suggestions are always visible.
- The first suggestion is now pre-selected, allowing a single `Tab`
press to accept the completion.
* BIM: remove unused import
* BIM: support SQL comments in queries
* BIM: support non-ASCII characters in queries
* BIM: Allow ORDER BY to accept a comma-separated list of columns for multi-level sorting.
* BIM: fix two-way overview/editor sync
* BIM: refactor to simplify editor modification events
* BIM: add tooltips to overview table
* BIM: add tooltips to query editor, enrich syntax data with signature and snippets
* BIM: implement PARENT function
* BIM: Enable property access on SQL function results
Previously, the SQL engine could only access properties directly from
the main object in a given row. This made it impossible to query
attributes of objects returned by functions, such as getting the name of
a parent with PARENT(*). This commit evolves the SQL grammar to handle
chained member access (.) with correct operator precedence. The parser's
transformer and execution logic were updated to recursively resolve
these chains, enabling more intuitive queries like SELECT
PARENT(*).Label and standard nested property access like Shape.Volume.
* BIM: refactor function registration, internationalize API metadata
* BIM: remove outdated Report alias
* BIM: refactor selectObjects to use latest API, move implementation to ArchSql
* BIM: improve friendly token names for error reporting
* BIM: implement chained functions e.g. PARENT(*).PARENT(*)
* BIM: add further tests for property access, fix bug with non-literal AS clause argument
* BIM: Implement full expression support for GROUP BY
The SQL engine's GROUP BY clause was previously limited to simple
property names, failing on queries that used functions (e.g., `GROUP BY
TYPE(*)`). This has been fixed by allowing the SQL transformer and
validator to correctly process function expressions.
The `SelectStatement.validate()` method now uses a canonical signature
to compare SELECT columns against GROUP BY expressions, ensuring
correctness for both simple properties and complex functions.
New regression tests have also been added to validate `GROUP BY`
functionality with chained functions (PPA) and multiple columns.
* BIM: Make arithmetic engine robust against missing properties
Previously, a query containing an arithmetic expression in the `WHERE`
clause would cause a fatal error if it processed an object that was
missing one of the properties used in the calculation.
This has been fixed by making the `ArithmeticOperation` class NULL-safe.
The engine now correctly handles `None` values returned by property
lookups, propagating them through the calculation as per standard SQL
behavior.
As a result, the engine no longer crashes on such queries. It now
gracefully evaluates all objects, simply filtering out those for which
the arithmetic expression cannot be resolved to a valid number. This
significantly improves the robustness of the query engine.
* BIM: Finalize ORDER BY logic and fix query regressions
- The `ORDER BY` clause is now governed by a single, predictable rule:
it can only refer to column names or aliases that exist in the final
`SELECT` list. The engine's transformer and execution logic have been
updated to enforce and correctly implement this, fixing several test
failures related to sorting by aliases and expressions.
- Updated test suite to align with the new engine rules. Add new
dedicated unit tests that explicitly document the supported (aliased
expression) and unsupported (raw expression) syntax for the `ORDER BY`
clause.
* BIM: Implement backend for pipelined report execution
Adds the backend architecture for multi-step, pipelined queries. The
core SQL engine can now execute a statement against the results of a
previous one, enabling complex sequential filtering.
- The internal `_run_query` function was refactored to be
pipeline-aware, allowing it to operate on a pre-filtered list of
source objects.
- A new `execute_pipeline` orchestrator was added to manage the data
flow between statements, controlled by a new `is_pipelined` flag in
the `ReportStatement` data model.
- The public API was extended with `selectObjectsFromPipeline` for
scripting, and `count()` was enhanced to support contextual validation
for the UI.
Pipelines phase 2
Pipelines phase 3
* BIM: refactor to avoid circular imports
* BIM: Address key CodeQl check errors/notes
* BIM: Refactor Task Panel UI/UX with explicit editing workflow
Refactor the report editor UI to improve usability and prevent data
loss. Editing a statement is now an explicit action, triggered by a new
"Edit Selected" button. This prevents accidental changes and enables a
new transactional workflow with "Save" and "Discard" buttons for each
edit session. A checkbox for "Apply & Next" has been added to streamline
editing multiple statements.
The results preview feature has been redesigned into a self-contained,
closable pane controlled by a "Show Preview" toggle. This pane includes
its own contextual "Refresh" button, reducing UI clutter. All action
button groups have been consistently right-aligned to improve layout and
workflow.
* BIM: Integrate pipeline execution and stabilize UI workflow
Completes the implementation of the pipelined statements feature by
integrating the new backend orchestrator with the ArchReport object. It
also includes a series of critical bug fixes that were discovered during
end-to-end testing, resulting in a more stable user experience.
The primary feature integration consists of refactoring the
_ArchReport.execute method. It now uses the ArchSql.execute_pipeline
generator, enabling the report to correctly process multi-step pipelines
and honor the user-configured data flow.
Severalbugs and regressions were fixed:
- Backend: A major flaw was fixed where FROM-clause functions (like
CHILDREN) were not pipeline-aware. The engine's GROUP BY validator was
also corrected to enforce its original, safer design of not supporting
aliases.
- UI Workflow: A feedback loop that caused the editor cursor to reset
was resolved. The transactional logic for the Save, Discard, and "Save
& Add New" actions was corrected to prevent data loss and ensure
predictable behavior. The Add and Duplicate actions no longer auto-open
the editor, creating a more consistent workflow.
- UI State: Fixed regressions related to the explicit editing model,
including incorrect statement loading (Edit Selected) and state
management when a report is reloaded from a file.
* BIM: add presets manager
* BIM: Fix 'still touched after recompute' bug in some of the tests
* BIM: cleanup tests, fixed presets tests to new presets locations
* BIM: Move test model to its own module for reusability
* BIM: Move GUI tests to their own module
- Disable two of the tests: they pass, but cause a segmentation fault on
teardown. They need to be investigated before enabling them on CI.
* BIM: fix bug in interpreting CONVERT string from GROUP BY
* BIM: Migrate signal connections from lambdas to Qt slots
Refactors all signal connections in the `ReportTaskPanel` to use the
`@QtCore.Slot()` decorator instead of lambda wrappers.
- Resolves CodeQL warning "Unnecessary lambda".
- Adheres to PySide/Qt best practices for signal/slot handling.
- Improves code clarity by using explicit, named methods for
connections.
- Prevents potential runtime `TypeError` exceptions by correctly
managing slot signatures for signals that emit arguments (e.g.,
`clicked(bool)`).
- Introduces simple slot wrappers where necessary to cleanly separate UI
event handling from core logic.
* BIM: Address CodeQl warnings
* BIM: Add CHILDREN_RECURSIVE(subquery, max_depth) SQL function to find all descendants of an object set.
- Create internal _get_bim_type and _is_bim_group helpers to remove all Draft module dependencies from the SQL engine.
- Implement a new _traverse_architectural_hierarchy function using a deque-based BFS algorithm to prevent infinite loops.
- The CHILDREN and CHILDREN_RECURSIVE functions now use the new traversal engine.
- The traversal engine now transparently navigates generic groups but excludes them from the results.
- Correct ParentFunction logic to validate containment by checking the parent's .Group list instead of the child's .InList.
- Add unit tests for recursive traversal, depth limiting, and transparent group handling.
- Update test_group_by_multiple_mixed_columns to match the corrected behavior of the TYPE(*) function.
* BIM: Add __repr__ and __str__ for the ArchReport proxy
* BIM: Align report quantity headers with internal units
- Change default `Quantity` headers to use the property's internal unit
(e.g., `mm`) instead of the user's global preferred unit (e.g., `m`).
- Fixes inconsistency where the header unit (e.g., `m²`) did not match
the raw data's unit (e.g., `mm²`), making the default behavior
predictable.
- Implement by parsing `str(Quantity)` as a workaround for the C++
`Unit::getString()` method not being exposed to the Python API.
- Add a unit test that temporarily changes the global schema to verify
the fix is independent of user preferences.
* BIM: remove dual import ArchSql and from ArchSql import
* BIM: Fix IfcRole => IfcType
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* CI: add Lark as a build dependency
* BIM: Replace QRegExp with QRegularExpression for regex patterns
QRegExp is no longer available in PySide6. Make the code compatible with
both PySide2/Qt5 and PySide6/Qt6.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* CI: move lark dependency to pixi's requirements.host
* BIM: Correct numeric comparisons in SQL WHERE clause
Refactor the `BooleanComparison.evaluate` method to handle numeric and
string-based comparisons separately. Previously, all comparisons were
being performed on string-converted values, causing numerically
incorrect results for `Quantity` objects formatted with "smart" units
(e.g., `"10.0 m"` was incorrectly evaluated as less than `"8000"`).
- The `evaluate` method now normalizes `Quantity` objects to their raw
`.Value` first.
- If both operands are numeric, a direct numerical comparison is
performed for all operators (`=`, `!=`, `>`, `<`, `>=`, `<=`).
- String-based comparisons (for `like`, or as a fallback for other
types) are handled in a separate path.
- Add unit test to lock down this behavior.
* BIM: autocompleter improvements
- Add a trailing space when autocompleting the keywords that need it
- Autocomplete multi-word keywords as a unit
* BIM: Improve live validation user experience
- Do not throw syntax error when in the middle of autocompleting a
keyword
- Introduce typing state and show incomplete query status
* BIM: change double-click action to edit in statements overview
Also allow quick editing the statement description with F2
* BIM: Improve user strings for consistency
* BIM: show count of returned objects in statements table
* BIM: disable preview on invalid queries
* BIM: define slot so that tests can run headless
* BIM: Update unit test to adapt to new behaviour
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Add detailed test coverage for the new Command constructor that accepts
annotations parameter, including positional and keyword arguments,
string and numeric annotations, empty annotations, and backward
compatibility. Split existing save/restore tests for better granularity.
src/Mod/CAM/CAMTests/TestPathCommandAnnotations.py:
- Added test14-test20 for Command constructor with annotations
- Split test12 into test12 (empty annotations) and test13
(complex annotations) for focused testing
- Completely re-implemented the TSP algorithm in C++ for better path quality
- Added detailed comments and documentation to clarify each step
- Improved nearest neighbor, 2-opt, and relocation logic
- Enhanced handling of start/end point constraints
- Updated PathUtils.py docstring to accurately describe start point behavior
- Enhanced the C++ TSP solver to accept optional start and end points, so the route can begin and/or end at the closest point to specified coordinates.
- Updated the Python pybind11 wrapper and PathUtils.sort_locations_tsp to support startPoint and endPoint as named parameters.
- Added a new Python test suite (TestTSPSolver.py) to verify correct handling of start/end points and integration with PathUtils.
- Registered the new test in TestCAMApp.py and CMakeLists.txt for automatic test discovery.
This update introduces a new C++ 2-Opt TSP solver with Python bindings.
src/Mod/CAM/App/CMakeLists.txt:
- Add build and install rules for the new pybind11-based tsp_solver Python module
src/Mod/CAM/App/tsp_solver.cpp:
- Add new C++ implementation of a 2-Opt TSP solver with nearest-neighbor initialization
src/Mod/CAM/App/tsp_solver.h:
- Add TSPPoint struct and TSPSolver class with 2-Opt solve method
src/Mod/CAM/App/tsp_solver_pybind.cpp:
- Add pybind11 wrapper exposing the TSP solver to Python as tsp_solver.solve
src/Mod/CAM/PathScripts/PathUtils.py:
- Add sort_locations_tsp Python wrapper for the C++ TSP solver
- Use tsp_solver.solve for TSP-based
Fixes#25924.
The `snapToIntersection` function has been changed to an if-elif structure, and in case of face-edge intersection snap, only two sublements are checked. This ensures a reasonable speed, even if objects have many edges and faces. The change does mean you have to move the mouse over the correct face for it to be processed. But since face-edge intersection snap is new anyway, this is acceptable I think.
Used TestMach3Mach4LegacyPost.py as the starting point with input from
other test scripts too.
The test demonstrate a fix for #25723, as the Fanuc post processor has not been not updated to the latest changes in
the Path module.
This is related to #24676, where thread tapping was added to LinuxCNC, but the equivalent code in the Fanuc
postprocessor were not adjusted to cope, and #25677 where it was observed that the Fanuc postprocessor was
broken in versions 0.20 and 1.0.
Added MockTool class to provide ShapeName to fanuc_post.py, used to
convert drill cycles to threading cycles if the tool has shapeid "tap".
Several methods introduced 2025-05-04 are preferred, but the methods
available in version 1.0 are used as fallback sources
for active status and coolent enabled.
The difference according to the documentation is that M30 will rewind
the paper tape while M2 will not. The effect on a CNC from 1994 is
that M30 turn on the indicator light marking that the program has
completed, while M2 do not, and the light is wanted to know when
the machine is done.
Fanuc only understand upper case letters, no point in providing the
file name in lower case letters. The provided file name is always "-",
so drop it completely. The first comment is presented in the Fanuc user
interface, it should get more relevant content.
Dropped useless semicolon.
Enabling tool height compensation will cause the axis to move up
the length of the tool, which will cause a Z overtravel error when
the tool change take place close to the top of the machine. To
counter this move, ask the machine to move its commanded position
down the length of the tool height, which in effect causes no upward
movement after the tool change. The #4120 variable contain the
current tool number, and #2000 - #20XX contain the tool heights.
The Fanuc post processor add a trailing space to all M6 lines.
This make it problematic to write test for the generated output,
when compiled with the automatic policy enforcer on github
removing trialing space from the expected output. Avoid the
problem by removing the trailing space from the generated
output.
The thread tapping implementation in the Fanuc post processor change
behaviour of M3, G81 and G82 when the tool ShapeID matches "tap".
but the code not not expect that the parse() method will be
called with two different classes as arguments.
Rewrite the M3 handling to handle ToolController arguments
instead of crashing with an AttributeError.
Issues:
Fixes#14016Fixes#25723
Some Fanuc machines do not understand the 'M6 T0' instructions in the
preamble. Move it out of the preamble and controlled by a new
command line argument --no-end-spindle-empty for the machines
where running to cause a "Tool Number Alarm" and the program to crash
as tool zero is not a valid tool.
Fixes: #25677
Reset line number when using --line-numbers. Restore all default values when a
command line argument is not used.
This helps the test scripts ensure that the arguments passed during one test is the only
one taking effect during this test.
This PR allows each Toolbit to have its own Units property (Metric/Imperial) for better unit management.
Short Summary:
- Adds a Units property (Metric/Imperial) to ToolBit objects for better unit management.
- Ensures ToolBit schema is set and restored properly in the editor and utilities.
- Updates formatting and property handling to respect the selected units.
- Improves the ToolBit editor widget to refresh and sync schema/UI when units change.
- Uses FreeCAD.Units.setSchema and getSchema to switch between unit schemas.
NOTE: Toolbit dimensions are read from JSON in their native units (as specified by the Units property),
converted to metric for all internal calculations, and displayed in the UI using the
toolbit's selected units. This ensures both accurate internal computation and user-friendly
display, while storing the correct units in the JSON. This can cause some rounding differences
when switching units. Example: 2 mm becomes 0.0787 inches. If you save that as imperial and then
switch back to metric, it will show 1.9999 mm
src/Mod/CAM/Path/Tool/toolbit/models/base.py:
- Add Units property to ToolBit and ensure it's set and synced with toolbit shape parameters.
- Update property creation and value formatting to use Units.
src/Mod/CAM/Path/Tool/toolbit/ui/editor.py:
- Use setToolBitSchema to set schema based on toolbit units.
- Add logic to refresh property editor widget when units change.
- Restore original schema on close.
- Improve docstrings and signal handling.
src/Mod/CAM/Path/Tool/toolbit/util.py:
- Add setToolBitSchema function for robust schema switching.
- Update format_value to use schema and units.
- Add docstrings and clarify formatting logic.
src/Mod/CAM/Path/Tool/library/ui/browser.py:
- Restore original schema after editing toolbit.
src/Mod/CAM/Path/Tool/library/ui/editor.py:
- Ensure correct schema is set for new toolbits.
* Part: TopoShape make getElementTypeAndIndex more robust
* Part: Add unit tests for new regex
---------
Co-authored-by: Chris Hennes <chennes@gmail.com>
* Gui: Fix preferences search popup positioning on Wayland
Change window flag from `Qt::Tool` to `Qt::ToolTip` to fix popup
appearing in center of screen and closing immediately on Wayland desktop
envs. `Qt::ToolTip` uses xdg_popup protocol which provides proper
positioning relative to parent window on Wayland.
* Gui: Initialize ok check flag to default in prefs
* Gui: Use ranged for loop where possible in prefs
* Gui: Remove unused variable in preferences controller
* Gui: Use const where possible in prefs search dialog
* Gui: Use static where possible in search prefs dialog
* Gui: Use braced initializer list when returning type in search prefs
* Gui: Use auto in search prefs dialog where possible
* Gui: Do not use else if after return in search prefs dialog
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Match the string that gets sent to setCommand
Correction of a not matching string that gets sent to setCommand. This results in a not translated menu item in the Sketcher menu.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
This commit makes boundary stock objects distinct from regular stock by
setting a boundary flag and label, and prevents editing of boundary
objects in the job view provider.
src/Mod/CAM/Path/Dressup/Boundary.py:
- Add promoteStockToBoundary method, set boundary properties, handle
missing stock/shape
src/Mod/CAM/Path/Main/Gui/Job.py:
- Block editing for objects flagged as boundary stock
This commit introduces support for passing an 'annotations' dictionary
to the Command class constructor and its Python bindings. The annotations
dictionary can contain string or numeric values for each key, allowing for
richer metadata on CAM commands. Each annotation must be provided as a
key-value pair within a dictionary.
Examples:
cmd = Command("G1", {"X": 10.0, "Y": 5.0}, {"note": "Rapid move"})
cmd = Command("G2", {"X": 20.0, "Y": 15.0}, {"priority": 1})
cmd = Command("G3", {"X": 30.0, "Y": 25.0}, {"note": "Arc move", "speed": 1500})
cmd = Command("G0", {"X": 0.0, "Y": 0.0}, {})
cmd = Command("G0", {"X": 0.0, "Y": 0.0})
cmd = Command("G1", {"X": 10.0, "Y": 5.0}, annotations={"note": "Rapid move"})
src/Mod/CAM/App/Command.cpp:
- Added new Command constructor accepting annotations
src/Mod/CAM/App/Command.h:
- Declared new Command constructor with annotations parameter
src/Mod/CAM/App/Command.pyi:
- Updated docstring to describe annotations argument
src/Mod/CAM/App/CommandPyImp.cpp:
- Extended Python init to parse and set annotations dictionary
This PR fixes a bug introduced with PR #25800
It updates the ObjectOp class to correctly assign the job, model,
and stock properties from the parentJob object. Previously, only
PathUtils.addToJob was called, which did not set these attributes directly.
This change ensures that when creating a new operation, the job, model,
and stock fields are properly initialized from the parent job. This
fixes issues where operations did not inherit the correct job context,
leading to missing or incorrect references to the model and stock, and
potential errors in downstream processing.
- Added new migration system to handle legacy parameter conversion for ToolBit assets and objects.
- Implemented ParameterAccessor abstraction for consistent access to dicts and FreeCAD objects.
- Centralized migration logic for CornerRadius from TorusRadius or FlatRadius/Diameter, restricted to Bullnose shape-type.
- Updated asset and object initialization to use migration logic and filter Bullnose parameters.
src/Mod/CAM/Path/Tool/camassets.py:
- Integrate new migration logic for ToolBit assets using ParameterAccessor and migrate_parameters.
- Ensure shape-type is set before parameter migration; only write changes if migration occurred.
src/Mod/CAM/Path/Tool/toolbit/migration.py:
- Add ParameterAccessor class and migrate_parameters function for unified migration.
- Handle legacy parameter conversion for Bullnose tools.
src/Mod/CAM/Path/Tool/toolbit/models/base.py:
- Apply migration logic to ToolBit objects on restore.
- Filter Bullnose parameters to remove FlatRadius after migration.
src/Mod/CAM/Path/Tool/shape/models/bullnose.py:
- Add filter_parameters method to remove FlatRadius for Bullnose.
src/Mod/CAM/Path/Op/SurfaceSupport.py:
- Derive FlatRadius from CornerRadius and Diameter if both are present.
src/Mod/CAM/Path/Op/Surface.py:
- Remove obsolete setOclCutter method.
* Add MoveWithHost check for material assignment
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* BIM: fix Arch_Reference update on doc restored
Fixes: #24943
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
`SketcherTransformationExpressionHelper` was using `geoId` as the map
key for storing expressions during geometry transformations. This is
incorrect since single geometry may have multiple constraints with
different expressions.
So, using `geoId` as the key causes `std::map` overwrites, resulting in
only the last expression being preserved per geometry.
So this patch changes key to be a constraint index, and adds
`ConstraintExpressionInfo` struct to store both expression and `geoId`.
Co-authored-by: PaddleStroke <pierrelouis.boyer@gmail.com>
* [TechDraw] fix dialog to be ontop, clear the keyLst and save mouse movement between messagebox and dialog
* [TechDraw] change from setWindowFlags to setWindowFlag
* [TechDraw] handle BIM and Draft as first available views...
.... also increase the possible scale values such as 5 : 2 or 7 : 3
* [TechDraw] fix 1:1 scale regression
* [TechDraw] remove unnecessary line of code
* TD: Simplify code
Address comments from review.
Co-authored-by: WandererFan <wandererfan@gmail.com>
* [TechDraw] enable use of Fraction for scale...
... conversion
---------
Co-authored-by: Chris Hennes <chennes@pioneerlibrarysystem.org>
Co-authored-by: WandererFan <wandererfan@gmail.com>
This PR adds rigid tapping back to the legacy LinuxCNC postprocessor, which
was removed in commit cd1c29e3f23fde0a90980ffcf3e70406769f2d43 in PR 24771.
The changes include:
- Modifying the linuxcnc_legacy_post.py script to include logic for Rigid tapping
- Updating comments and documentation to reflect the addition of Rigid tapping
* part design: fix issue #25639 use c++ exception to prevent crash
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
As the title says. This patch adds support for finding tooltip text,
also extends widget types to QSpinBoxes/QDoubleSpinBoxes and also adds
support for finding combobox items from QComboBox dropdown. Also adds
support for QGroupBox titles.
Updated CAM unit tests and LinuxCNC serializer to handle decimal separators consistently, ensuring tests pass regardless of system locale. Assertions now compare FreeCAD.Units.Quantity objects directly or normalize decimal separators in strings. LinuxCNC serializer output is forced to use periods for decimals.
src/Mod/CAM/CAMTests/TestPathToolBitListWidget.py:
- Normalize decimal separators in tool description assertions for locale robustness.
src/Mod/CAM/CAMTests/TestPathToolBitPropertyEditorWidget.py:
- Use FreeCAD.Units.Quantity for direct quantity comparisons in property editor tests.
src/Mod/CAM/CAMTests/TestPathToolBitSerializer.py:
- Compare deserialized and serialized quantities using FreeCAD.Units.Quantity for consistency.
src/Mod/CAM/CAMTests/TestPathToolShapeClasses.py:
- Compare parameter values and units directly instead of relying on string formatting.
src/Mod/CAM/Path/Tool/library/serializers/linuxcnc.py:
- Force period as decimal separator in LinuxCNC serializer output to avoid locale issues.
* [ArchWall] Fix Bug: Center-Align with Centered Multi-Material
Fix#25485
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
This fixes positioning of some previews for booleans that were misplaced
after #24750 was merged. It restores previous code that was correct for
most cases. The reason for some previews being misaligned is described
in the #25578 - the preview actually shows how the result should be but
due to some shortcuts taken in code the result is incorrect.
Safeguards the generation of explosion trail lines to avoid creating
invalid geometry.
Previously, if a part displacement was zero (or effectively zero),
`Part.LineSegment` would attempt to create a line with identical start
and end points, causing OpenCascade to throw a `Part.OCCError`. This
resulted in failures during document restoration and recomputes.
This commit introduces a `_createSafeLine` helper method that checks the
distance against a `1e-7` (near-zero) tolerance before attempting to
generate the shape.
When a Python-based object throws an exception during the restoration
process (e.g. inside `onDocumentRestored`), the error is caught by a
generic `catch(...)` block in `Document::afterRestore`.
Previously, this block swallowed the C++ exception wrapper but failed to
clear the underlying Python error state. Leaving the interpreter in this
"dirty" state caused a segmentation fault or `SystemError` later in the
loading process when C++ attempted to interact with the Python API
(specifically in `App::Application::setActiveDocument`).
This commit adds a check for `PyErr_Occurred()` inside the catch block.
If an error is detected, the traceback is printed to the console for
debugging, and `PyErr_Clear()` is called to reset the interpreter state,
allowing the application to continue loading the document without
crashing.
[Gui] Fix string encoding for document, object and subobject names in PropertyLink, SelectionSearch, PD Sketch Based Tasks, Part Primitives and Document handling.
* The number_length function did not take imperial dimensions into account. For `9" + 7/8"` it would return 1.
* In ArchRoof reference number_length function from DraftGui.py to avoid duplicate code.
This method can be used to bake in transform directly into geometry.
Normally the setTransform or setPlacement methods only store additional
positional data within the shape without changing the actual geometry.
So if we have some geometry placed at 0,0,0 and we want to have few
copies of that shape the goemetry stays intact but additional transform
is stored. This method can be used to alter the gometry and reset the
transform to identity. It helps with model stability, as not every
method correctly handles that additional transform metadata.
This commit removes a ton of dead code from FeatureBoolean. It might
been ported here from the Link branch but it is not used and it is
confusing. The reason for having that code here is also not really
obvious so there is no reason to keep it.
Fixes an issue where Chipload and similar mixin-defined properties were added to
the schema but not reliably restored, because parameter restoration did not always
apply them to the toolbit object. This change ensures Chipload is restored from saved
data and displayed using the user's preferred unit schema, even when no document
is open. This update also ensures the toolbit editor respects the user’s unit schema
preference during editing, even outside an open document.
src/Mod/CAM/Path/Tool/toolbit/models/base.py:
- Restore Chipload (and other parameters) to toolbit.obj if the property exists.
src/Mod/CAM/Path/Tool/toolbit/ui/editor.py:
- Set units schema to user preference when opening the toolbit editor, so Chipload and other values display correctly.
adapt weekly build workflow to do normal releases too, rename accordingly
skip macos singning setup if certificate not available (useful to run on forks)
add missing dmgbuild dependency for badge icons on macos
build windows installer in workflow, add needed dependencies to pixi.toml
reorganize packaging scripts that can be useful outside rattler-build too
do some cleanup
add .gitignore to rattler-build
Properly configure appimage updating depending on release type and upload zsync file
* #25474 Added read-only warnings when saving documents
Block saving a file and notify user if windows is unable to save to the file for any reason, or the read-only attribute is checked. Also check std::filesystem::perms for write permission and other checks in FileInfo::isWritable(), although it doesn't seem to matter on windows.
Co-authored-by: Chris Hennes <chennes@pioneerlibrarysystem.org>
move windowsinstaller to /package
update artwork
adapt to conda builds
make msvc redist directory optional
automate version information definition
use relative directories for file locations definitions
improve/update readme
partially update Delete.bat for qt6 libpack
add .gitignore
update signing.bat and add hashing command
WindowsInstaller: use --safe-mode in freecadcmd commands [skip ci]
WindowsInstaller: make windows 8 the minimum version [skip ci]
WindowsInstaller: allow configuring some values via command line
windows installer update for qt6 build
* BIM: fix handling of BIM_Sketch view properties
The handling of the sketch view properties was not correct:
* AutoColor was not set to `False`.
* PointSize was missing.
* PointColor was not set to the DefaultShapeVertexColor preference.
* Grid values were never applied. Sketches do not have a GridSnap property and gridSize is not the correct Draft preference.
* Sketch grid snap is a global setting that affects all sketches, the code should not change that setting IMO.
* Remove trailing white space
For some platforms due to event loop and timer triggering being not
deterministic stylesheets could be loaded before style parameters were
fully loaded. This caused warnings about style parameters to appear
potentially confusing users.
This commit changes the stylesheet loading to happen much earlier in the
process so the stylesheet is applied before theme preselection has
chance to happen.
* BIM: Implement smart base removal for Walls
Previously, removing the Base object from an Arch Wall would cause the
wall to reset its position to the document origin and could lead to
unintended geometric changes for complex walls.
This commit introduces a "smart debasing" mechanism integrated into the
Component Task Panel's "Remove" button:
- For walls based on a single straight line, the operation now preserves
the wall's global position and parametric `Length`, making it an
independent object.
- For walls with complex bases (multi-segment, curved), a warning dialog
is now presented to the user, explaining the consequences (shape
alteration and position reset) before allowing the operation to
proceed.
This is supported by new API functions `Arch.is_debasable()` and
`Arch.debaseWall()`, which contain the core logic for the feature.
Fixes: https://github.com/FreeCAD/FreeCAD/issues/24453
* BIM: Move wall debasing logic into ArchWall proxy
The logic for handling the removal of a wall's base object was previously
implemented directly within the generic `ComponentTaskPanel` in
`ArchComponent.py`. This created a tight coupling, forcing the generic
component UI to have specific knowledge about the `ArchWall` type.
This commit refactors the implementation to follow a more object-oriented
and polymorphic design:
1. A new overridable method, `handleComponentRemoval(subobject)`, has been
added to the base `ArchComponent` proxy class. Its default implementation
maintains the standard removal behavior.
2. The `_Wall` proxy class in `ArchWall.py` now overrides this method. All
wall-specific debasing logic, including the eligibility check and the
user-facing warning dialog, now resides entirely within this override.
3. The `ComponentTaskPanel.removeElement` method has been simplified. It is
now a generic dispatcher that calls `handleComponentRemoval` on the
proxy of the object being edited, with no specific knowledge of object types.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* BIM: Correct user warning
The operation can indeed be undone.
Co-authored-by: Roy-043 <70520633+Roy-043@users.noreply.github.com>
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Roy-043 <70520633+Roy-043@users.noreply.github.com>
Prevent RuntimeError by safely handling missing or deleted geometry import
widgets in Path operation panels. This ensures the UI update code does not
fail if the underlying C++ objects are destroyed, improving stability when
panels are closed or the UI changes.
src/Mod/CAM/Path/Op/Base.py:
- Wrap geometry import widget access in try/except to avoid crashes
- Add error handling for panel widget deletion scenarios
* Assembly: Sub-assembly: fix support for Part-wb objects
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Sketcher: Remove transaction from TaskSketcherConstraints::doSetVisible
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Assigning a material without an appearance reset the appearance to the
default appearance.
There were two main problems. One was the comparison function for
App::Material objects. It would return false when the UUID or MatType
values were different although there are many circumstances where this
could be true and the appearance be the same. It also incorrectly
compared the imagePath.
The second problem was the logic for detecting if an object has already
been assigned an appearance by assigning a material or manually setting
the appearance. If assigned a material, the appearance should update but
not if it has been set manually. This logic has been corrected.
GitHub is deprecating macOS 13 runners -- the only remaining Intel runner is now macOS 15, and it is scheduled for retirement in 2027, at which point we will no longer be able to provide Intel weeklies.
* Core: Convert transparency to alpha
Create new `Base::getVersion()` function for extracting a program
version enumeration given a version string.
Convert transparency to alpha value for old project files.
* Base/App: Address review comments
---------
Co-authored-by: wmayer <wmayer@freecad.org>
* Post Processor cleanup and rename
remove unused files
Basic implementation of generic post
add blending mode support for linuxcnc
add mocking for postprocessor tests
Add tests for generic post
linuxcnc test only tests linuxcnc specific functionality
minor improvements
add arc splitting to refactored post processors
Refactor smoothie post
move posts to legacy. Remove 'refactored'
lint cleanup
fixes#19417
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* CAM: Slot tooltip
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: sliptonic <shopinthewoods@gmail.com>
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Core: workaround for Building US unit system bug
Fixes#11345
This workaround should hopefully fix the Building US unit system bug at the level of the InputField code. This is the most feasible solution given that we are currently in the v1.1 feature freeze.
I use the word "hopefully" because I have not compiled and tested the code. But replacing `+` with `--` works in Python examples.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
* Fix typo in comment
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* Define DlgScale task panel's tab order
To improve keyboard navigation.
Fixes: https://github.com/FreeCAD/FreeCAD/issues/23772
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Currently `ExpLineEdit::apply()` passes `QString::constData()` to a
printf-style format string with %s. `QString::constData() returns a
const QChar* (UTF-16, 2 bytes per char), but %s expects a const char*
(UTF-8/ASCII with 1 byte per char).
This results in a string being interpreted as in "Container":
Byte 0: 'C'
Byte 1: 0x00 (high byte of UTF-16 'C', which gets interpreted as null
terminator)
So this patch uses proper conversion to null-terminated C-String before
passing it further.
* Fix typos and grammar
Fixes typos and grammar in several files.
* fix missed typo
* Remove unnecessary line in LeadInOut.py
---------
Co-authored-by: Roy-043 <70520633+Roy-043@users.noreply.github.com>
* [ BIM ]: Refactor Save Preset Stringify
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
* BIM: Update search box text for material search
* BIM: change Material Manager title to title case
* BIM: change Material Manager search placeholder text to sentence case
* BIM: reword reference to tree to avoid confusion with the Tree View
* BIM: Rename button text for creating Multi-Material for consistency
* Assembly: no dragger for connected parts
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
For some reason the empty layout was not saved for users with existing
config. To ensure that the change does not affect existing users and is
persistent for current ones we need to save value with older default
before using it. Previous solution did not work correctly as the widgets
were not persisted correctly.
Most of the code treats RESOLUTION_FACTOR as "number of clipper units in
a single step" -- a linear distance unit. However, there are a few
locations in which it is treated as unitless, multiplied by area
constants. This commit folds the current value of RESOLUTION_FACTOR into
these other contents in preparation for declaring it to have distance
units and increasing its value.
Currently if user tries to press TAB during Expression Editor, it
inserts both the entry and its first subentry. Also, if user browses the
dropdown with arrows keys, it inserts it's values.
Root cause of that is the regression made in latest changes to chaining
completion logic which is triggered for all completion modes including
TAB, which already has its own refresh mechanism. Also,
ExpressionTextEdit connected both activated (Enter/click) and highlight
signals to the same slot, resulting in arrow key navigation inserting
completions.
So, this adds separate slots for ExpressionTextEdit to differentiate
completion modes. And also updates tab handling to pass
ActivationMode::Highlighted to prevent double chaining.
- Added --rigid-tap argument to linuxcnc_post.py to enable G33.1 rigid tapping cycle output.
- Implemented logic to skip G80, G98, G99 commands with tapping annotation when rigid tapping is enabled.
- Enhanced handling of G84/G74 tapping cycles for rigid tapping, including pitch (K), depth (Z), dwell (G04 P), spindle reversal (M3/M4/M5), and reverse-out moves.
- Updated Tapping.py to annotate G98/G99 and G80 commands with {"operation": "tapping"} for improved post processor handling.
src/Mod/CAM/App/Command.cpp:
- Removed requirement for annotations= prefix; now all text after ; is treated as annotation data.
- Updated Command::toGCode to output annotations as key-value pairs in comments.
- Improved setFromGCode to extract annotations from any comment after ;.
- Enhanced annotation parsing to handle quoted strings and floating-point numbers.
- Simplified XML serialization and restoration logic for annotations.
src/Mod/CAM/App/Path.cpp:
- Added addCommandNoRecalc, allowing bulk loading of commands without repeated recalculation.
- Refactored RestoreDocFile to read GCode files line-by-line, parse each command, and call recalculate() only once after all commands are loaded.
- Added explanatory comment above the old implementation.
src/Mod/CAM/App/Path.h:
- Declared addCommandNoRecalc in the Toolpath class.
src/Mod/CAM/CAMTests/TestPathCommandAnnotations.py:
- Adjusted unit test for scientific notation annotation to check only 6 decimal places.
- Adjusted unit test 10 to properly handle assertions with the toGCode method
src/Mod/CAM/PathSimulator/AppGL/GCodeParser.cpp:
- GCodeParser::ParseLine: Truncate at first semicolon (annotations / comment)
Thanks for taking the time to fill out this problem report! Please [search](https://github.com/FreeCAD/FreeCAD/issues) if a similar issue already exists and check out [how to report issues](https://github.com/FreeCAD/FreeCAD?tab=readme-ov-file#reporting-issues). By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/FreeCAD/FreeCAD/blob/main/CODE_OF_CONDUCT.md).
- type:dropdown
id:wb
attributes:
label:Workbench affected?
options:
- Assembly
- BIM
- CAM
- Core (App, Gui,...)
- Draft
- FEM
- Material
- Measurement
- Mesh
- Part
- Part Design
- Sketcher
- Spreadsheet
- TechDraw
- Other (specify in description)
- type:textarea
id:description
attributes:
label:Problem description
description:Describe the problem and how it impacts user experience, workflow, maintainability or performance. You can attach images or log files by clicking this area to highlight it and then dragging files in. To attach a FCStd file, ZIP it first.
placeholder:Describe your problem briefly.
validations:
required:true
- type:textarea
id:steps_to_reproduce
attributes:
label:Steps to reproduce
description:If the problem appears to be a bug with the current functionality, provide a test case or recipe that reliably reproduces the issue. Ideally [record a macro](https://wiki.freecad.org/Std_DlgMacroRecord) and attach it. Please also add an example file as ZIP.
placeholder:|
Drag an example file as ZIP into this textbox to attach it.
Steps to reproduce the behavior:
1. Open my example file
2. Go to '...'
3. Click on '...'
validations:
required:true
- type:textarea
id:expected_behavior
attributes:
label:Expected behavior
description:A clear and concise description of what you expected to happen when following the provided steps above.
placeholder:What is the expected behavior?
validations:
required:true
- type:textarea
id:actual_behavior
attributes:
label:Actual behavior
description:A clear and concise description of what actually happens. If applicable, add screenshots to help explain the problem.
placeholder:What is actually happening? You can add screenshorts or videos by dragging them into this textbox.
validations:
required:true
- type:textarea
id:dev_version
attributes:
label:Development version About Info (in Safe Mode)
description:Download the latest weekly [development release](https://github.com/FreeCAD/FreeCAD/releases) and try reproducing the issue in safe mode (Help → Restart in Safe Mode). Use the [About FreeCAD](https://wiki.freecad.org/About) dialog to copy your full version information and paste it here.
placeholder:|
1. Download the latest weekly development version (link above).
2. Make sure to run in Safe Mode (Help -> Restart in Safe Mode) to exclude interference from 3rd party addons.
3. If the issue is still reproducible, open the About FreeCAD dialog and copy the full version info here.
render:shell
validations:
required:true
- type:textarea
id:good_version
attributes:
label:Last known good version (optional)
description:If this is a regression, paste the [About FreeCAD](https://wiki.freecad.org/About) info from the last known working version.
placeholder:If the problem did not exist in a previous version, paste the About FreeCAD info from that version here.
description:Report problems related to code structure, maintainability, performance, correctness, or technical debt that do not directly affect end-user behavior.
description:Please [search](https://github.com/FreeCAD/FreeCAD/issues) to see if a similar issue already exists for the problem you encountered.
options:
- label:I have searched the existing issues
required:true
- type:textarea
id:description
attributes:
label:Problem description
description:Describe the problem and how it impacts user experience, workflow, maintainability or speed of the code. If the problem appears to be a bug with the current functionality, provide as test case or recipe that reproduces the error. Ideally record a macro and attach it.
placeholder:Description of the problem
validations:
required:true
- type:textarea
id:full_version
attributes:
label:Full version info
description:Please use the About FreeCAD dialog to copy your full version information and paste it here. Try reproducing the issue by restarting FreeCAD in safe mode too.
render:shell
validations:
required:true
- type:dropdown
id:wb
attributes:
label:Subproject(s) affected?
options:
- Addon Manager
- Assembly
- BIM
- CAM
- Core
- Draft
- Expressions
- FEM
- File formats
- Material
- Measurement
- Mesh
- OpenSCAD
- Part
- PartDesign
- Project Tools & Websites
- Sketcher
- Spreadsheet
- TechDraw
- Other (specify in description)
- type:textarea
id:anything_else
attributes:
label:Anything else?
description:|
Links? References? Anything that will give us more context about the issue you are encountering!
If there is a discussion about the problem on the forum, provide link(s) here.
You can upload or copy your macro here to speed up the diagnosis and debugging.
Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in. To attach a FCStd file, ZIP it first (GitHub won't recognize the extension otherwise).
validations:
required:false
- type:checkboxes
id:terms
attributes:
label:Code of Conduct
description:By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/FreeCAD/FreeCAD/blob/main/CODE_OF_CONDUCT.md)
options:
- label:I agree to follow this project's Code of Conduct
# your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
steps:
- name:Harden the runner (Audit all outbound calls)
# your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
steps:
- name:Harden the runner (Audit all outbound calls)
These are instructions for building an NSIS-based installer for FreeCAD. They were designed for FreeCAD 0.21 and later,
and presume that you have cloned a copy of FreeCAD's source code, and therefore have the directory *src/WindowsInstaller*.
and presume that you have cloned a copy of FreeCAD's source code, and therefore have the directory *package/WindowsInstaller*.
## Install NSIS
To set up your system for building an NSIS installer:
@@ -15,16 +15,13 @@ To set up your system for building an NSIS installer:
4. Download and install the nsProcess plugin from https://nsis.sourceforge.io/NsProcess_plugin -- you will need the version that supports Unicode, so make sure to follow the appropriate instructions on their site to install that one (as of this writing it involves manually copying and renaming the plugin DLL file).
## Build the installer
Next, update the installer settings for the current version of FreeCAD. Starting from the *src/WindowsInstaller* folder in the FreeCAD source tree:
1. Set the appropriate version strings for the release you are creating. These are used to construct the filename of the installer, among other things. If you have to upload a new version of the installer for the exact same release of FreeCAD, increment `APP_VERSION BUILD` as needed.
```
!define APP_VERSION_MAJOR 0
!define APP_VERSION_MINOR 21
!define APP_VERSION_REVISION 0
Next, update the installer settings for the current version of FreeCAD. Starting from the *package/WindowsInstaller* folder in the FreeCAD source tree:
1. Set the appropriate version strings for the release you are creating. These are used to construct the filename of the installer, among other things. If you have to upload a new version of the installer for the exact same release of FreeCAD, increment `APP_VERSION BUILD` as needed. The main version numbers are dynamically obtained by calling `freecadcmd.exe`.
```nsis
!define APP_VERSION_EMERGENCY "RC1"
!define APP_VERSION_BUILD 1
```
2. Within the folder *src/WindowsInstaller*, create a new folder called MSVCRedist and copy the following files from your MSVC installation into it:
2. If the installer will be made from a LibPack build create a new folder called MSVCRedist within the folder *package/WindowsInstaller* and copy the following files from your MSVC installation into it:
```
vcruntime140.dll
concrt140.dll
@@ -33,28 +30,38 @@ vcamp140.dll
vccorlib140.dll
vcomp140.dll
```
3. Open the file *Settings.nsh* with a text editor (both jEdit and Visual Studio Code are good editors for NSIS files). Edit the following paths to correspond to your system: `FILES_FREECAD` corresponds to your installation directory (e.g. `CMAKE_INSTALL_PREFIX` if you self-compiled) and `FILES_DEPS` is the folder you created with the MSVC redistributable files in it.
3. If required open the file *Settings.nsh* with a text editor (both jEdit and Visual Studio Code are good editors for NSIS files). Edit the following paths to correspond to your system: `FILES_FREECAD` corresponds to your installation directory (e.g. `CMAKE_INSTALL_PREFIX` if you self-compiled), `FILES_THUMBS` is the directory where the thumbnailer dll is located and `FILES_DEPS` is the folder you created with the MSVC redistributable files in it.`FILES_DEPS` is not needed if the installer is created from a conda bundle so it is not set by default. These can be set via /D argument for `makensis.exe` or by editing *Settings.nsh*.
```nsis
!ifndef FILES_FREECAD
!define FILES_FREECAD "${__FILEDIR__}\FreeCAD"
!endif
!ifndef FILES_THUMBS
!define FILES_THUMBS "${__FILEDIR__}\thumbnail"
!endif
#!define FILES_DEPS "${__FILEDIR__}\MSVC_Redist"
```
4. Ensure the FreeCAD files are in place. Here you have two options:
* If you are working from an already-compiled version of FreeCAD provided to you by an outside source: in this case, simply ensure that `FILES_FREECAD` is set to the directory containing those files.
* If you compiled FreeCAD on your own as described [here](https://wiki.freecad.org/Compile_on_Windows) (and using the Install option outlined there). Then:
* Open the file *Settings.nsh*as described in step 3. above and set there</br>
`!define FILES_FREECAD` to the folder you specified as `CMAKE_INSTALL_PREFIX`
* Copy into that folder the file *Delete.bat* that is part of the installer
* Copy into the installation folder the file *Delete.bat*that is part of the installer
* open a command line in Windows and change to the folder
* run the comamand</br>
* run the command</br>
`Delete.bat`
* (These steps assure that the installer only contains files users need. Moreover it assures that the
overall files size is below 2 GB and we can use the most compact compression for the installer.)
5. Right-click on the file *FreeCAD-installer.nsi* and choose **Compile NSIS script**
to compile the installer.
to compile the installer. You can also run from command line to specify some settings
print -r -- "🏳️ Notarization is taking too long, bailing out. 🏳️" >&2
return4
fi
sleep $(((attempt<6?2**attempt:60)+ RANDOM%5 ))# Increasing timeout plus jitter for multi-run safety
done
}
if ! id="$(submit_notarization_request)";then
print -r -- "❌ Failed to submit notarization request" >&2
exit1
fi
if[[ -z "$id"]];then
print -r -- "❌ Submission succeeded but no ID was returned" >&2
exit1
fi
print "Notarization submission ID: $id"
if wait_for_notarization_result "$id";then
print "✅ Notarization succeeded. Stapling..."
xcrun stapler staple "${DMG_NAME}"
print "Stapled: ${DMG_NAME}"
rm -f "${ID_FILE}"
else
rc=$?
print "❌ Notarization failed (code $rc)." >&2
exit"$rc"
fi
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
PaddleStroke
