Fix compatibility with some old V4 schematic files.

From master branch, commit #bfe59581

.gitattributes

@@ -0,0 +1,31 @@
+
+# Custom attribute to mark source files using KiCad C++ formatting
+[attr]kicad-cpp-source whitepace=tab-in-indent format.clang-format-kicad
+
+# Custom attribute to mark KiCad's own CMake files
+[attr]kicad-cmake-source whitespace=tab-in-indent
+
+# Custom attribute for auto-generated sources:
+# * Do not perform whitespace checking
+# * Do not format
+[attr]generated whitespace=-tab-in-indent,-indent-with-non-tab -format.clang-format-kicad
+
+# By default, all C and C++ files conform to KiCad formatting,
+# unless overridden
+*.c         kicad-cpp-source
+*.cpp       kicad-cpp-source
+*.h         kicad-cpp-source
+
+*.cmake     kicad-cmake-source
+*.txt       kicad-cmake-source
+
+# Compiled bitmap sources
+bitmaps_png/cpp_*/*.cpp     generated
+
+# wxFormBuilder-generated files
+**/dialog*/*_base.cpp       generated
+**/dialog*/*_base.h         generated
+
+# Lemon grammars
+common/libeval/grammar.c    generated
+common/libeval/grammar.h    generated

.githooks/pre-commit.d/50-check-format

@@ -7,10 +7,24 @@
 # Based on clang-format pre-commit hook by Alex Eagle
 # https://gist.github.com/alexeagle/c8ed91b14a407342d9a8e112b5ac7dab
 
-# Set KICAD_CHECK_FORMAT to allow this hook to run
-# if not set, the hook always succeeds.
-if [ -z "$KICAD_CHECK_FORMAT" ]; then
-    exit 0
+# Set kicad.check-format to allow this hook to run
+# If not set, the hook always succeeds.
+
+do_format=false
+
+# Check if formatting is configured
+if [ "$(git config --get kicad.check-format)" = true ]; then
+    do_format=true
+fi
+
+# Older env variable method
+if [ ! -z "$KICAD_CHECK_FORMAT" ]; then
+    do_format=true
+fi
+
+if [ ! ${do_format} = true ]; then
+    # No formatting required
+    exit 0;
 fi
 
 check_clang_format() {
@@ -30,20 +44,48 @@ check_git_config() {
     fi
 }
 
+get_filtered_filenames()
+{
+    format_attr='clang-format-kicad'
+
+    # command to get list of candidate files
+    git_list_files='git diff --cached --name-only --diff-filter=ACM'
+
+    files=$(${git_list_files} |
+
+        # Filter for format-controlled files
+        git check-attr --stdin format.${format_attr} |
+
+        # output only the file names
+        grep ": set$" |
+        cut -d: -f1)
+
+    echo ${files}
+}
+
 check_clang_format
 check_git_config
 
-readonly out=$(git clang-format -v --diff)
+files_to_check=$(get_filtered_filenames)
+
+if [ -z "${files_to_check}" ]; then
+    # No controlled files to check
+    exit 0;
+fi
+
+git_clang_format_cmd="git clang-format -v --diff -- ${files_to_check}"
+
+readonly out=$(${git_clang_format_cmd})
 
 # In these cases, there is no formatting issues, so we succeed
 if [[ "$out" == *"no modified files to format"* ]]; then exit 0; fi
 if [[ "$out" == *"clang-format did not modify any files"* ]]; then exit 0; fi
 
 # Any other case implies formatting results
-echo "ERROR: you need to run git clang-format on your commit"
+echo "ERROR: you need to run clang-format (e.g. using tools/check_coding.sh) on your commit"
 
 # print the errors to show what's the issue
-git clang-format -v --diff
+${git_clang_format_cmd}
 
 # fail the pre-commit
 exit 1

.gitignore

@@ -1,5 +1,6 @@
-boost_root
 .downloads-by-cmake
+.gdb_history
+boost_root
 Build*
 build*
 common/fp_lib_table_keywords.cpp
@@ -59,6 +60,16 @@ demos/**/*-bak
 demos/**/_autosave-*
 demos/**/fp-info-cache
 
+# MacOS package info created by CMake
+bitmap2component/Info.plist
+cvpcb/Info.plist
+eeschema/Info.plist
+gerbview/Info.plist
+kicad/Info.plist
+pagelayout_editor/Info.plist
+pcb_calculator/Info.plist
+pcbnew/Info.plist
+
 # editor/OS fluff
 .*.swp
 *~
@@ -76,3 +87,29 @@ demos/**/fp-info-cache
 *.gch
 *.orig
 *.patch
+
+# These CMake files are wanted
+!CMakeModules/*.cmake
+
+# Eclipse IDE
+.project
+.cproject
+.pydevproject
+__pycache__
+
+# Visual Studio
+.vs/
+.editorconfig
+CMakeSettings.json
+
+# Sublime Text
+*.sublime-*
+
+# KDevelop
+.kdev4/
+*.kdev4
+
+# Translations
+*.mo
+i18n_status.svg
+i18n_status.csv

3d-viewer/3d_cache/dialogs/dlg_select_3dmodel.cpp

@@ -221,7 +221,7 @@ void DLG_SELECT_3DMODEL::OnFileActivated( wxTreeEvent& event )
 
 void DLG_SELECT_3DMODEL::SetRootDir( wxCommandEvent& event )
 {
-    if( m_FileTree )
+    if( m_FileTree && dirChoices->GetSelection() > 0 )
         m_FileTree->SetPath( dirChoices->GetString( dirChoices->GetSelection() ) );
 
     return;
@@ -263,21 +263,31 @@ void DLG_SELECT_3DMODEL::updateDirChoiceList( void )
 
     if( !cl.empty() )
     {
+        unsigned int choice = 0;
         dirChoices->Clear();
+        dirChoices->Append( "" ); //Insert a blank string at the beginning to allow selection
 
         if( !prjDir.empty() )
+        {
             dirChoices->Append( prjDir );
 
+            if( prjDir == m_FileTree->GetPath() )
+                choice = 1;
+        }
+
         std::set< wxString >::const_iterator sI = cl.begin();
         std::set< wxString >::const_iterator eI = cl.end();
 
         while( sI != eI )
         {
+            if( *sI == m_FileTree->GetPath() )
+                choice = dirChoices->GetCount();
+
             dirChoices->Append( *sI );
             ++sI;
         }
 
-        dirChoices->Select( 0 );
+        dirChoices->Select( choice );
     }
 
     return;

3d-viewer/3d_cache/dialogs/panel_prev_3d_base.cpp

@@ -1,5 +1,5 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jun  5 2018)
+// C++ code generated with wxFormBuilder (version 3.9.0 Nov  1 2020)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
@@ -9,209 +9,209 @@
 
 ///////////////////////////////////////////////////////////////////////////
 
-PANEL_PREV_3D_BASE::PANEL_PREV_3D_BASE( wxWindow* parent, wxWindowID id, const wxPoint& pos, const wxSize& size, long style ) : wxPanel( parent, id, pos, size, style )
+PANEL_PREV_3D_BASE::PANEL_PREV_3D_BASE( wxWindow* parent, wxWindowID id, const wxPoint& pos, const wxSize& size, long style, const wxString& name ) : wxPanel( parent, id, pos, size, style, name )
 {
 	wxBoxSizer* bSizermain;
 	bSizermain = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	wxBoxSizer* bSizerLeft;
 	bSizerLeft = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxStaticBoxSizer* sbSizerScale;
 	sbSizerScale = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Scale") ), wxVERTICAL );
-	
+
 	wxFlexGridSizer* fgSizerScale;
 	fgSizerScale = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerScale->SetFlexibleDirection( wxBOTH );
 	fgSizerScale->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
+
 	m_staticText1 = new wxStaticText( sbSizerScale->GetStaticBox(), wxID_ANY, _("X:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText1->Wrap( -1 );
 	fgSizerScale->Add( m_staticText1, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	xscale = new wxTextCtrl( sbSizerScale->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerScale->Add( xscale, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_spinXscale = new wxSpinButton( sbSizerScale->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerScale->Add( m_spinXscale, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_staticText2 = new wxStaticText( sbSizerScale->GetStaticBox(), wxID_ANY, _("Y:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText2->Wrap( -1 );
 	fgSizerScale->Add( m_staticText2, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	yscale = new wxTextCtrl( sbSizerScale->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerScale->Add( yscale, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_spinYscale = new wxSpinButton( sbSizerScale->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerScale->Add( m_spinYscale, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_staticText3 = new wxStaticText( sbSizerScale->GetStaticBox(), wxID_ANY, _("Z:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText3->Wrap( -1 );
 	fgSizerScale->Add( m_staticText3, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxLEFT, 5 );
-	
+
 	zscale = new wxTextCtrl( sbSizerScale->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerScale->Add( zscale, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxLEFT, 5 );
-	
+
 	m_spinZscale = new wxSpinButton( sbSizerScale->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerScale->Add( m_spinZscale, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM, 5 );
-	
-	
+
+
 	sbSizerScale->Add( fgSizerScale, 0, wxEXPAND|wxRIGHT|wxLEFT, 10 );
-	
-	
+
+
 	bSizerLeft->Add( sbSizerScale, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	wxStaticBoxSizer* sbSizerRotation;
 	sbSizerRotation = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Rotation") ), wxVERTICAL );
-	
+
 	wxFlexGridSizer* fgSizerRotate;
 	fgSizerRotate = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerRotate->SetFlexibleDirection( wxBOTH );
 	fgSizerRotate->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
+
 	m_staticText11 = new wxStaticText( sbSizerRotation->GetStaticBox(), wxID_ANY, _("X:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText11->Wrap( -1 );
 	fgSizerRotate->Add( m_staticText11, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	xrot = new wxTextCtrl( sbSizerRotation->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRotate->Add( xrot, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_spinXrot = new wxSpinButton( sbSizerRotation->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerRotate->Add( m_spinXrot, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_staticText21 = new wxStaticText( sbSizerRotation->GetStaticBox(), wxID_ANY, _("Y:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText21->Wrap( -1 );
 	fgSizerRotate->Add( m_staticText21, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	yrot = new wxTextCtrl( sbSizerRotation->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRotate->Add( yrot, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_spinYrot = new wxSpinButton( sbSizerRotation->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerRotate->Add( m_spinYrot, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_staticText31 = new wxStaticText( sbSizerRotation->GetStaticBox(), wxID_ANY, _("Z:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText31->Wrap( -1 );
 	fgSizerRotate->Add( m_staticText31, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxLEFT, 5 );
-	
+
 	zrot = new wxTextCtrl( sbSizerRotation->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRotate->Add( zrot, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxLEFT, 5 );
-	
+
 	m_spinZrot = new wxSpinButton( sbSizerRotation->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerRotate->Add( m_spinZrot, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM, 5 );
-	
-	
+
+
 	sbSizerRotation->Add( fgSizerRotate, 0, wxEXPAND|wxRIGHT|wxLEFT, 10 );
-	
-	
+
+
 	bSizerLeft->Add( sbSizerRotation, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	wxStaticBoxSizer* sbSizerOffset;
 	sbSizerOffset = new wxStaticBoxSizer( new wxStaticBox( this, wxID_ANY, _("Offset") ), wxVERTICAL );
-	
+
 	wxFlexGridSizer* fgSizerOffset;
 	fgSizerOffset = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerOffset->SetFlexibleDirection( wxBOTH );
 	fgSizerOffset->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
+
 	m_staticText12 = new wxStaticText( sbSizerOffset->GetStaticBox(), wxID_ANY, _("X:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText12->Wrap( -1 );
 	fgSizerOffset->Add( m_staticText12, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	xoff = new wxTextCtrl( sbSizerOffset->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerOffset->Add( xoff, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_spinXoffset = new wxSpinButton( sbSizerOffset->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerOffset->Add( m_spinXoffset, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_staticText22 = new wxStaticText( sbSizerOffset->GetStaticBox(), wxID_ANY, _("Y:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText22->Wrap( -1 );
 	fgSizerOffset->Add( m_staticText22, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	yoff = new wxTextCtrl( sbSizerOffset->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerOffset->Add( yoff, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_spinYoffset = new wxSpinButton( sbSizerOffset->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerOffset->Add( m_spinYoffset, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_staticText32 = new wxStaticText( sbSizerOffset->GetStaticBox(), wxID_ANY, _("Z:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText32->Wrap( -1 );
 	fgSizerOffset->Add( m_staticText32, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxLEFT, 5 );
-	
+
 	zoff = new wxTextCtrl( sbSizerOffset->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerOffset->Add( zoff, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxLEFT, 5 );
-	
+
 	m_spinZoffset = new wxSpinButton( sbSizerOffset->GetStaticBox(), wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_VERTICAL );
 	fgSizerOffset->Add( m_spinZoffset, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM, 5 );
-	
-	
+
+
 	sbSizerOffset->Add( fgSizerOffset, 0, wxEXPAND|wxLEFT|wxRIGHT, 10 );
-	
-	
+
+
 	bSizerLeft->Add( sbSizerOffset, 0, wxEXPAND|wxALL, 5 );
-	
-	
+
+
 	bSizermain->Add( bSizerLeft, 0, 0, 5 );
-	
+
 	wxBoxSizer* bSizerRight;
 	bSizerRight = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxStaticText* staticPreviewLabel;
 	staticPreviewLabel = new wxStaticText( this, wxID_ANY, _("Preview"), wxDefaultPosition, wxDefaultSize, 0 );
 	staticPreviewLabel->Wrap( -1 );
 	staticPreviewLabel->SetFont( wxFont( 11, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL, false, wxEmptyString ) );
-	
-	bSizerRight->Add( staticPreviewLabel, 0, wxLEFT, 15 );
-	
+
+	bSizerRight->Add( staticPreviewLabel, 0, wxALL, 5 );
+
 	m_SizerPanelView = new wxBoxSizer( wxVERTICAL );
-	
-	
-	bSizerRight->Add( m_SizerPanelView, 1, wxEXPAND|wxBOTTOM, 8 );
-	
-	
+
+
+	bSizerRight->Add( m_SizerPanelView, 1, wxEXPAND|wxBOTTOM, 5 );
+
+
 	bSizermain->Add( bSizerRight, 1, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 4 );
-	
+
 	wxBoxSizer* bSizer3DButtons;
 	bSizer3DButtons = new wxBoxSizer( wxVERTICAL );
-	
-	
+
+
 	bSizer3DButtons->Add( 0, 0, 0, wxEXPAND|wxTOP, 4 );
-	
-	m_bpvISO = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
+
+	m_bpvISO = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
 	m_bpvISO->SetToolTip( _("Change to isometric perspective") );
-	
+
 	bSizer3DButtons->Add( m_bpvISO, 0, wxTOP|wxBOTTOM, 5 );
-	
-	m_bpvLeft = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
+
+	m_bpvLeft = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
 	bSizer3DButtons->Add( m_bpvLeft, 0, 0, 5 );
-	
-	m_bpvRight = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
-	bSizer3DButtons->Add( m_bpvRight, 0, 0, 5 );
-	
-	m_bpvFront = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
-	bSizer3DButtons->Add( m_bpvFront, 0, 0, 5 );
-	
-	m_bpvBack = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
-	bSizer3DButtons->Add( m_bpvBack, 0, 0, 5 );
-	
-	m_bpvTop = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
-	bSizer3DButtons->Add( m_bpvTop, 0, 0, 5 );
-	
-	m_bpvBottom = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
-	bSizer3DButtons->Add( m_bpvBottom, 0, 0, 5 );
-	
-	m_bpUpdate = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 40,40 ), wxBU_AUTODRAW );
+
+	m_bpvRight = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
+	bSizer3DButtons->Add( m_bpvRight, 0, wxTOP, 5 );
+
+	m_bpvFront = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
+	bSizer3DButtons->Add( m_bpvFront, 0, wxTOP, 5 );
+
+	m_bpvBack = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
+	bSizer3DButtons->Add( m_bpvBack, 0, wxTOP, 5 );
+
+	m_bpvTop = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
+	bSizer3DButtons->Add( m_bpvTop, 0, wxTOP, 5 );
+
+	m_bpvBottom = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
+	bSizer3DButtons->Add( m_bpvBottom, 0, wxTOP, 5 );
+
+	m_bpUpdate = new wxBitmapButton( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), wxBU_AUTODRAW|0 );
 	m_bpUpdate->SetToolTip( _("Reload board and 3D models") );
-	
+
 	bSizer3DButtons->Add( m_bpUpdate, 0, wxTOP, 5 );
-	
-	
+
+
 	bSizermain->Add( bSizer3DButtons, 0, wxALL|wxEXPAND, 5 );
-	
-	
+
+
 	this->SetSizer( bSizermain );
 	this->Layout();
 	bSizermain->Fit( this );
-	
+
 	// Connect Events
 	xscale->Connect( wxEVT_MOUSEWHEEL, wxMouseEventHandler( PANEL_PREV_3D_BASE::onMouseWheelScale ), NULL, this );
 	xscale->Connect( wxEVT_COMMAND_TEXT_UPDATED, wxCommandEventHandler( PANEL_PREV_3D_BASE::updateOrientation ), NULL, this );
@@ -306,5 +306,5 @@ PANEL_PREV_3D_BASE::~PANEL_PREV_3D_BASE()
 	m_bpvTop->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( PANEL_PREV_3D_BASE::View3DTop ), NULL, this );
 	m_bpvBottom->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( PANEL_PREV_3D_BASE::View3DBottom ), NULL, this );
 	m_bpUpdate->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( PANEL_PREV_3D_BASE::View3DUpdate ), NULL, this );
-	
+
 }

3d-viewer/3d_cache/dialogs/panel_prev_3d_base.h

@@ -1,12 +1,11 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jun  5 2018)
+// C++ code generated with wxFormBuilder (version 3.9.0 Nov  1 2020)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
 ///////////////////////////////////////////////////////////////////////////
 
-#ifndef __PANEL_PREV_3D_BASE_H__
-#define __PANEL_PREV_3D_BASE_H__
+#pragma once
 
 #include <wx/artprov.h>
 #include <wx/xrc/xmlres.h>
@@ -21,10 +20,10 @@
 #include <wx/spinbutt.h>
 #include <wx/sizer.h>
 #include <wx/statbox.h>
+#include <wx/bmpbuttn.h>
 #include <wx/bitmap.h>
 #include <wx/image.h>
 #include <wx/icon.h>
-#include <wx/bmpbuttn.h>
 #include <wx/button.h>
 #include <wx/panel.h>
 
@@ -34,10 +33,10 @@
 ///////////////////////////////////////////////////////////////////////////////
 /// Class PANEL_PREV_3D_BASE
 ///////////////////////////////////////////////////////////////////////////////
-class PANEL_PREV_3D_BASE : public wxPanel 
+class PANEL_PREV_3D_BASE : public wxPanel
 {
 	private:
-	
+
 	protected:
 		wxStaticText* m_staticText1;
 		wxTextCtrl* xscale;
@@ -74,7 +73,7 @@ class PANEL_PREV_3D_BASE : public wxPanel
 		wxBitmapButton* m_bpvTop;
 		wxBitmapButton* m_bpvBottom;
 		wxBitmapButton* m_bpUpdate;
-		
+
 		// Virtual event handlers, overide them in your derived class
 		virtual void onMouseWheelScale( wxMouseEvent& event ) { event.Skip(); }
 		virtual void updateOrientation( wxCommandEvent& event ) { event.Skip(); }
@@ -94,14 +93,13 @@ class PANEL_PREV_3D_BASE : public wxPanel
 		virtual void View3DTop( wxCommandEvent& event ) { event.Skip(); }
 		virtual void View3DBottom( wxCommandEvent& event ) { event.Skip(); }
 		virtual void View3DUpdate( wxCommandEvent& event ) { event.Skip(); }
-		
-	
+
+
 	public:
 		wxTextCtrl* yoff;
-		
-		PANEL_PREV_3D_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxTAB_TRAVERSAL ); 
+
+		PANEL_PREV_3D_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxTAB_TRAVERSAL, const wxString& name = wxEmptyString );
 		~PANEL_PREV_3D_BASE();
-	
+
 };
 
-#endif //__PANEL_PREV_3D_BASE_H__

3d-viewer/3d_cache/dialogs/panel_prev_model.cpp

@@ -28,16 +28,20 @@
  * @file  panel_prev_model.cpp
  */
 
+#include "panel_prev_model.h"
+
 #include <3d_canvas/eda_3d_canvas.h>
 #include <common_ogl/cogl_att_list.h>
-#include <bitmaps.h>
-#include <base_units.h>
 
-#include "project.h"
-#include "panel_prev_model.h"
 #include <class_board.h>
+
+#include <base_units.h>
+#include <bitmaps.h>
 #include <class_drawpanel.h>
+#include <dpi_scaling.h>
 #include <pgm_base.h>
+#include <project.h>
+
 
 PANEL_PREV_3D::PANEL_PREV_3D( wxWindow* aParent, PCB_BASE_FRAME* aFrame, MODULE* aModule,
                               std::vector<MODULE_3D_SETTINGS> *aParentModelList ) :
@@ -58,15 +62,13 @@ PANEL_PREV_3D::PANEL_PREV_3D( wxWindow* aParent, PCB_BASE_FRAME* aFrame, MODULE*
     // Set 3d viewer configuration for preview
     m_settings3Dviewer = new CINFO3D_VISU();
 
-    bool option;
-    Pgm().CommonSettings()->Read( ENBL_MOUSEWHEEL_PAN_KEY, &option, false );
-    m_settings3Dviewer->SetFlag( FL_MOUSEWHEEL_PANNING, option );
-
     // Create the 3D canvas
     m_previewPane = new EDA_3D_CANVAS( this, COGL_ATT_LIST::GetAttributesList( true ),
                                        m_dummyBoard, *m_settings3Dviewer,
                                        aFrame->Prj().Get3DCacheManager() );
 
+    loadCommonSettings();
+
     m_SizerPanelView->Add( m_previewPane, 1, wxEXPAND, 5 );
 }
 
@@ -111,6 +113,25 @@ void PANEL_PREV_3D::initPanel()
 }
 
 
+void PANEL_PREV_3D::loadCommonSettings()
+{
+    wxCHECK_RET( m_previewPane, "Cannot load settings to null canvas" );
+
+    wxConfigBase& cmnCfg = *Pgm().CommonSettings();
+
+    {
+        const DPI_SCALING dpi{ &cmnCfg, this };
+        m_previewPane->SetScaleFactor( dpi.GetScaleFactor() );
+    }
+
+    {
+        bool option;
+        cmnCfg.Read( ENBL_MOUSEWHEEL_PAN_KEY, &option, false );
+        m_settings3Dviewer->SetFlag( FL_MOUSEWHEEL_PANNING, option );
+    }
+}
+
+
 /**
  * @brief rotationFromString
  * Ensure -MAX_ROTATION <= rotation <= MAX_ROTATION

3d-viewer/3d_cache/dialogs/panel_prev_model.h

@@ -93,6 +93,11 @@ private:
 private:
     void initPanel();
 
+    /**
+     * Load 3D relevant settings from the user configuration
+     */
+    void loadCommonSettings();
+
     /**
      * @brief updateOrientation - it will receive the events from editing the fields
      * @param event

3d-viewer/3d_cache/sg/CMakeLists.txt

@@ -44,7 +44,7 @@ if( APPLE )
 endif()
 
 find_file( S3DSG_VERSION_FILE sg_version.h
-        PATHS ${CMAKE_SOURCE_DIR}/include/plugins/3dapi NO_DEFAULT_PATH )
+        PATHS ${CMAKE_SOURCE_DIR}/include/plugins/3dapi NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH)
 
 if( NOT ${S3DSG_VERSION_FILE} STREQUAL "S3DSG_VERSION_FILE-NOTFOUND" )
 
@@ -95,8 +95,12 @@ target_compile_definitions( kicad_3dsg PRIVATE -DCOMPILE_SGLIB )
 
 target_link_libraries( kicad_3dsg ${wxWidgets_LIBRARIES} )
 
+# Don't specify the ARCHIVE DESTINATION parameter to prevent
+# the install of the import library on Windows
+# https://cmake.org/pipermail/cmake/2011-November/047746.html
 install( TARGETS
     kicad_3dsg
-    DESTINATION ${KICAD_LIB}
+    RUNTIME DESTINATION ${KICAD_LIB}
+    LIBRARY DESTINATION ${KICAD_LIB}
     COMPONENT binary
     )

3d-viewer/3d_canvas/cinfo3d_visu.cpp

@@ -66,7 +66,6 @@ CINFO3D_VISU::CINFO3D_VISU() :
     m_boardCenter = SFVEC3F( 0.0f );
 
     m_boardBoudingBox.Reset();
-    m_board2dBBox3DU.Reset();
 
     m_layers_container2D.clear();
     m_layers_holes2D.clear();
@@ -273,13 +272,9 @@ void CINFO3D_VISU::InitSettings( REPORTER *aStatusTextReporter )
 {
     wxLogTrace( m_logTrace, wxT( "CINFO3D_VISU::InitSettings" ) );
 
-    // Calculates the board bounding box
-    // First, use only the board outlines
-    EDA_RECT bbbox = m_board->ComputeBoundingBox( true );
-
-    // If no outlines, use the board with items
-    if( ( bbbox.GetWidth() == 0 ) && ( bbbox.GetHeight() == 0 ) )
-        bbbox = m_board->ComputeBoundingBox( false );
+    // Calculates the board bounding box (board outlines + items)
+    // to ensure any item, even outside the board outlines can be seen
+    EDA_RECT bbbox = m_board->ComputeBoundingBox( false );
 
     // Gives a non null size to avoid issues in zoom / scale calculations
     if( ( bbbox.GetWidth() == 0 ) && ( bbbox.GetHeight() == 0 ) )
@@ -462,8 +457,6 @@ void CINFO3D_VISU::createBoardPolygon()
         errmsg.append( _( "Cannot determine the board outline." ) );
         wxLogMessage( errmsg );
     }
-
-    Polygon_Calc_BBox_3DU( m_board_poly, m_board2dBBox3DU, m_biuTo3Dunits );
 }
 
 

3d-viewer/3d_canvas/cinfo3d_visu.h

@@ -550,9 +550,6 @@ class CINFO3D_VISU
     /// 3d bouding box of the pcb board in 3d units
     CBBOX   m_boardBoudingBox;
 
-    /// 2d bouding box of the pcb board in 3d units
-    CBBOX2D m_board2dBBox3DU;
-
     /// It contains polygon contours for each layer
     MAP_POLY          m_layers_poly;
 

3d-viewer/3d_canvas/create_3Dgraphic_brd_items.cpp

@@ -62,13 +62,11 @@
 static int s_textWidth;
 static CGENERICCONTAINER2D *s_dstcontainer = NULL;
 static float s_biuTo3Dunits;
-static const CBBOX2D *s_boardBBox3DU = NULL;
 static const BOARD_ITEM *s_boardItem = NULL;
 
 // This is a call back function, used by DrawGraphicText to draw the 3D text shape:
 void addTextSegmToContainer( int x0, int y0, int xf, int yf, void* aData )
 {
-    wxASSERT( s_boardBBox3DU != NULL );
     wxASSERT( s_dstcontainer != NULL );
 
     const SFVEC2F start3DU( x0 * s_biuTo3Dunits, -y0 * s_biuTo3Dunits );
@@ -76,7 +74,7 @@ void addTextSegmToContainer( int x0, int y0, int xf, int yf, void* aData )
 
     if( Is_segment_a_circle( start3DU, end3DU ) )
         s_dstcontainer->Add( new CFILLEDCIRCLE2D( start3DU,
-                                                  s_textWidth * s_biuTo3Dunits,
+                                                  ( s_textWidth / 2 ) * s_biuTo3Dunits,
                                                   *s_boardItem) );
     else
         s_dstcontainer->Add( new CROUNDSEGMENT2D( start3DU,
@@ -103,7 +101,6 @@ void CINFO3D_VISU::AddShapeWithClearanceToContainer( const TEXTE_PCB* aTextPCB,
     s_dstcontainer = aDstContainer;
     s_textWidth    = aTextPCB->GetThickness() + ( 2 * aClearanceValue );
     s_biuTo3Dunits = m_biuTo3Dunits;
-    s_boardBBox3DU = &m_board2dBBox3DU;
 
     // not actually used, but needed by DrawGraphicText
     const COLOR4D dummy_color = COLOR4D::BLACK;
@@ -228,7 +225,6 @@ void CINFO3D_VISU::AddGraphicsShapesWithClearanceToContainer( const MODULE* aMod
     s_boardItem    = (const BOARD_ITEM *)&aModule->Value();
     s_dstcontainer = aDstContainer;
     s_biuTo3Dunits = m_biuTo3Dunits;
-    s_boardBBox3DU = &m_board2dBBox3DU;
 
     for( unsigned ii = 0; ii < texts.size(); ++ii )
     {
@@ -390,9 +386,22 @@ void CINFO3D_VISU::createNewPadWithClearance( const D_PAD* aPad,
     case PAD_SHAPE_RECT:
     {
         // see pcbnew/board_items_to_polygon_shape_transform.cpp
-
         wxPoint corners[4];
-        aPad->BuildPadPolygon( corners, wxSize( 0, 0), aPad->GetOrientation() );
+        bool drawOutline;
+
+        // For aClearanceValue.x == aClearanceValue.y and > 0 we use the pad shape
+        // and draw outlines with thicknes = aClearanceValue.
+        // Otherwise we draw only the inflated/deflated shape
+        if( aClearanceValue.x > 0 && aClearanceValue.x == aClearanceValue.y )
+        {
+            drawOutline = true;
+            aPad->BuildPadPolygon( corners, wxSize( 0, 0 ), aPad->GetOrientation() );
+        }
+        else
+        {
+            drawOutline = false;
+            aPad->BuildPadPolygon( corners, aClearanceValue, aPad->GetOrientation() );
+        }
 
         SFVEC2F corners3DU[4];
 
@@ -420,20 +429,23 @@ void CINFO3D_VISU::createNewPadWithClearance( const D_PAD* aPad,
         // Add the PAD contours
         // Round segments cannot have 0-length elements, so we approximate them
         // as a small circle
-        for( int i = 1; i <= 4; i++ )
+        if( drawOutline )
         {
-            if( Is_segment_a_circle( corners3DU[i - 1], corners3DU[i & 3] ) )
+            for( int i = 1; i <= 4; i++ )
             {
-                aDstContainer->Add( new CFILLEDCIRCLE2D( corners3DU[i - 1],
-                                        aClearanceValue.x * m_biuTo3Dunits,
-                                        *aPad ) );
-            }
-            else
-            {
-                aDstContainer->Add( new CROUNDSEGMENT2D( corners3DU[i - 1],
-                                                         corners3DU[i & 3],
-                                                         aClearanceValue.x * 2.0f * m_biuTo3Dunits,
-                                                         *aPad ) );
+                if( Is_segment_a_circle( corners3DU[i - 1], corners3DU[i & 3] ) )
+                {
+                    aDstContainer->Add( new CFILLEDCIRCLE2D( corners3DU[i - 1],
+                                            aClearanceValue.x * m_biuTo3Dunits,
+                                            *aPad ) );
+                }
+                else
+                {
+                    aDstContainer->Add( new CROUNDSEGMENT2D( corners3DU[i - 1],
+                                                             corners3DU[i & 3],
+                                                             aClearanceValue.x * 2.0f * m_biuTo3Dunits,
+                                                             *aPad ) );
+                }
             }
         }
     }

3d-viewer/3d_canvas/eda_3d_canvas.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2015-2016 Mario Luzeiro <mrluzeiro@ua.pt>
- * Copyright (C) 1992-2019 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2020 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -57,6 +57,9 @@ const wxChar * EDA_3D_CANVAS::m_logTrace = wxT( "KI_TRACE_EDA_3D_CANVAS" );
 
 const float EDA_3D_CANVAS::m_delta_move_step_factor = 0.7f;
 
+// A custom event, used to call DoRePaint during an idle time
+wxDEFINE_EVENT( wxEVT_REFRESH_CUSTOM_COMMAND, wxEvent);
+
 
 BEGIN_EVENT_TABLE( EDA_3D_CANVAS, wxGLCanvas )
     EVT_PAINT( EDA_3D_CANVAS::OnPaint )
@@ -78,6 +81,7 @@ BEGIN_EVENT_TABLE( EDA_3D_CANVAS, wxGLCanvas )
 
     // other events
     EVT_ERASE_BACKGROUND( EDA_3D_CANVAS::OnEraseBackground )
+    EVT_CUSTOM(wxEVT_REFRESH_CUSTOM_COMMAND, ID_CUSTOM_EVENT_1, EDA_3D_CANVAS::OnRefreshRequest )
     EVT_MENU_RANGE( ID_POPUP_3D_VIEW_START,
                     ID_POPUP_3D_VIEW_END, EDA_3D_CANVAS::OnPopUpMenu )
 
@@ -312,17 +316,22 @@ void EDA_3D_CANVAS::DisplayStatus()
 }
 
 
-void EDA_3D_CANVAS::OnPaint( wxPaintEvent &event )
+void EDA_3D_CANVAS::OnPaint( wxPaintEvent& aEvent )
 {
     // Please have a look at:
     // https://lists.launchpad.net/kicad-developers/msg25149.html
     // wxPaintDC( this );
-    // event.Skip( false );
+    // aEvent.Skip( false );
+    DoRePaint();
+}
 
+
+void EDA_3D_CANVAS::DoRePaint()
+{
     // SwapBuffer requires the window to be shown before calling
     if( !IsShownOnScreen() )
     {
-        wxLogTrace( m_logTrace, "EDA_3D_CANVAS::OnPaint !IsShown" );
+        wxLogTrace( m_logTrace, "EDA_3D_CANVAS::DoRePaint !IsShown" );
         return;
     }
 
@@ -359,7 +368,7 @@ void EDA_3D_CANVAS::OnPaint( wxPaintEvent &event )
     // multiple canvases: If we updated the viewport in the wxSizeEvent
     // handler, changing the size of one canvas causes a viewport setting that
     // is wrong when next another canvas is repainted.
-    wxSize clientSize = GetClientSize();
+    wxSize clientSize = GetNativePixelSize();
 
     const bool windows_size_changed = m_settings.CameraGet().SetCurWindowSize( clientSize );
 
@@ -576,7 +585,7 @@ void EDA_3D_CANVAS::OnMouseMove( wxMouseEvent &event )
     if( m_camera_is_moving )
         return;
 
-    m_settings.CameraGet().SetCurWindowSize( GetClientSize() );
+    m_settings.CameraGet().SetCurWindowSize( GetNativePixelSize() );
 
     if( event.Dragging() )
     {
@@ -856,13 +865,13 @@ void EDA_3D_CANVAS::restart_editingTimeOut_Timer()
 
 void EDA_3D_CANVAS::OnTimerTimeout_Redraw( wxTimerEvent &event )
 {
-    (void)event;
+    Request_refresh( true );
+}
 
-    //Refresh();
-    //Update();
 
-    wxPaintEvent redrawEvent;
-    wxPostEvent( this, redrawEvent );
+void EDA_3D_CANVAS::OnRefreshRequest( wxEvent& aEvent )
+{
+   DoRePaint();
 }
 
 
@@ -870,22 +879,12 @@ void EDA_3D_CANVAS::Request_refresh( bool aRedrawImmediately )
 {
     if( aRedrawImmediately )
     {
-        // On some systems, just calling Refresh does not work always
-        // (Issue experienced on Win7 MSYS2)
-        //Refresh();
-        //Update();
-
-        // Using PostEvent will take priority to other events, like
-        // mouse movements, keys, etc.
-        wxPaintEvent redrawEvent;
+        // Just calling Refresh() does not work always
+        // Using an event to call DoRepaint ensure the repaint code will be executed,
+        // and PostEvent will take priority to other events like mouse movements, keys, etc.
+        // and is executed during the next idle time
+        wxCommandEvent redrawEvent( wxEVT_REFRESH_CUSTOM_COMMAND, ID_CUSTOM_EVENT_1 );
         wxPostEvent( this, redrawEvent );
-
-        // This behaves the same
-        // wxQueueEvent( this,
-                        // From wxWidget documentation: "The heap-allocated and
-                        // non-NULL event to queue, the function takes ownership of it."
-        //               new wxPaintEvent()
-        //               );
     }
     else
     {
@@ -1085,7 +1084,10 @@ bool EDA_3D_CANVAS::SetView3D( int aKeycode )
         m_settings.CameraGet().SetT0_and_T1_current_T();
         m_settings.CameraGet().Reset_T1();
         m_settings.CameraGet().RotateX_T1( glm::radians(  -90.0f ) );
-        m_settings.CameraGet().RotateZ_T1( glm::radians( -180.0f ) );
+        // The rotation angle should be 180.
+        // We use 179.999 (180 - epsilon) to avoid a full 360 deg rotation when
+        // using 180 deg if the previous rotated position was already 180 deg
+        m_settings.CameraGet().RotateZ_T1( glm::radians( -179.999f ) );
         request_start_moving_camera();
         return true;
 
@@ -1101,7 +1103,7 @@ bool EDA_3D_CANVAS::SetView3D( int aKeycode )
         m_settings.CameraGet().SetInterpolateMode( INTERPOLATION_BEZIER );
         m_settings.CameraGet().SetT0_and_T1_current_T();
         m_settings.CameraGet().Reset_T1();
-        m_settings.CameraGet().RotateY_T1( glm::radians( 180.0f ) );
+        m_settings.CameraGet().RotateY_T1( glm::radians( 179.999f ) ); // Rotation = 180-epsilon
         request_start_moving_camera(
                     glm::min( glm::max( m_settings.CameraGet().ZoomGet(), 0.5f ), 1.125f ) );
         return true;

3d-viewer/3d_canvas/eda_3d_canvas.h

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2015-2016 Mario Luzeiro <mrluzeiro@ua.pt>
- * Copyright (C) 1992-2019 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2020 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -135,10 +135,21 @@ class EDA_3D_CANVAS : public HIDPI_GL_CANVAS
 
 private:
 
-    void OnPaint( wxPaintEvent &event );
+    /** Called by a wxPaintEvent event
+     */
+    void OnPaint( wxPaintEvent& aEvent );
+
+    /**
+     * The actual function to repaint the canvas.
+     * It is usually called by OnPaint() but because it does not use a wxPaintDC
+     * it can be called outside a wxPaintEvent
+     */
+    void DoRePaint();
 
     void OnEraseBackground( wxEraseEvent &event );
 
+    void OnRefreshRequest( wxEvent& aEvent );
+
     void OnMouseWheel( wxMouseEvent &event );
 
 #if wxCHECK_VERSION( 3, 1, 0 ) || defined( USE_OSX_MAGNIFY_EVENT )

3d-viewer/3d_rendering/3d_render_ogl_legacy/c3d_render_ogl_legacy.cpp

@@ -198,6 +198,7 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
                                               0.00f, 0.30f );
 
         m_materials.m_Copper.m_Shininess = shininessfactor * 128.0f;
+        m_materials.m_Copper.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
 
         // Paste material mixed with paste color
@@ -213,6 +214,7 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
                                                   m_settings.m_SolderPasteColor.b );
 
         m_materials.m_Paste.m_Shininess = 0.1f * 128.0f;
+        m_materials.m_Paste.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
 
         // Silk screen material mixed with silk screen color
@@ -228,6 +230,7 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
                                                   m_settings.m_SilkScreenColor.b + 0.10f );
 
         m_materials.m_SilkS.m_Shininess = 0.078125f * 128.0f;
+        m_materials.m_SilkS.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
 
         // Solder mask material mixed with solder mask color
@@ -244,6 +247,7 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
 
         m_materials.m_SolderMask.m_Shininess = 0.8f * 128.0f;
         m_materials.m_SolderMask.m_Transparency = 0.17f;
+        m_materials.m_SolderMask.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
 
         // Epoxy material
@@ -258,6 +262,7 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
                                                         20.0f / 255.0f );
 
         m_materials.m_EpoxyBoard.m_Shininess = 0.1f * 128.0f;
+        m_materials.m_EpoxyBoard.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
     }
     else    // Technical Mode
     {
@@ -269,34 +274,40 @@ void C3D_RENDER_OGL_LEGACY::setupMaterials()
         m_materials.m_Copper.m_Ambient   = matAmbientColor;
         m_materials.m_Copper.m_Specular  = matSpecularColor;
         m_materials.m_Copper.m_Shininess = matShininess;
+        m_materials.m_Copper.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
         // Paste material
         m_materials.m_Paste.m_Ambient   = matAmbientColor;
         m_materials.m_Paste.m_Specular  = matSpecularColor;
         m_materials.m_Paste.m_Shininess = matShininess;
+        m_materials.m_Paste.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
         // Silk screen material
         m_materials.m_SilkS.m_Ambient   = matAmbientColor;
         m_materials.m_SilkS.m_Specular  = matSpecularColor;
         m_materials.m_SilkS.m_Shininess = matShininess;
+        m_materials.m_SilkS.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
         // Solder mask material
         m_materials.m_SolderMask.m_Ambient   = matAmbientColor;
         m_materials.m_SolderMask.m_Specular  = matSpecularColor;
         m_materials.m_SolderMask.m_Shininess = matShininess;
         m_materials.m_SolderMask.m_Transparency = 0.17f;
+        m_materials.m_SolderMask.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
         // Epoxy material
         m_materials.m_EpoxyBoard.m_Ambient   = matAmbientColor;
         m_materials.m_EpoxyBoard.m_Diffuse   = m_settings.m_BoardBodyColor;
         m_materials.m_EpoxyBoard.m_Specular  = matSpecularColor;
         m_materials.m_EpoxyBoard.m_Shininess = matShininess;
+        m_materials.m_EpoxyBoard.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
 
         // Gray material (used for example in technical vias and pad holes)
         m_materials.m_GrayMaterial.m_Ambient    = SFVEC3F( 0.8f, 0.8f, 0.8f );
         m_materials.m_GrayMaterial.m_Diffuse    = SFVEC3F( 0.3f, 0.3f, 0.3f );
         m_materials.m_GrayMaterial.m_Specular   = SFVEC3F( 0.4f, 0.4f, 0.4f );
         m_materials.m_GrayMaterial.m_Shininess  = 0.01f * 128.0f;
+        m_materials.m_GrayMaterial.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
     }
 }
 
@@ -347,6 +358,7 @@ void C3D_RENDER_OGL_LEGACY::set_layer_material( PCB_LAYER_ID aLayerID )
                                     m_materials.m_Plastic.m_Diffuse.b * 0.7f );
 
             m_materials.m_Plastic.m_Shininess = 0.078125f * 128.0f;
+            m_materials.m_Plastic.m_Emissive = SFVEC3F( 0.0f, 0.0f, 0.0f );
             OGL_SetMaterial( m_materials.m_Plastic );
         break;
 

3d-viewer/3d_rendering/3d_render_raytracing/c3d_render_createscene.cpp

@@ -286,7 +286,9 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER *aStatusTextReporter )
 
     m_outlineBoard2dObjects = new CCONTAINER2D;
 
-    if( ((const SHAPE_POLY_SET &)m_settings.GetBoardPoly()).OutlineCount() == 1 )
+    const int outlineCount = m_settings.GetBoardPoly().OutlineCount();
+
+    if( outlineCount > 0 )
     {
         float divFactor = 0.0f;
 
@@ -299,12 +301,16 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER *aStatusTextReporter )
         SHAPE_POLY_SET boardPolyCopy = m_settings.GetBoardPoly();
         boardPolyCopy.Fracture( SHAPE_POLY_SET::PM_FAST );
 
-        Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
-                    boardPolyCopy,
-                    *m_outlineBoard2dObjects,
-                    m_settings.BiuTo3Dunits(),
-                    divFactor,
-                    (const BOARD_ITEM &)*m_settings.GetBoard() );
+        for( int iOutlinePolyIdx = 0; iOutlinePolyIdx < outlineCount; iOutlinePolyIdx++ )
+        {
+            Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
+                        boardPolyCopy,
+                        *m_outlineBoard2dObjects,
+                        m_settings.BiuTo3Dunits(),
+                        divFactor,
+                        *dynamic_cast<const BOARD_ITEM*>( m_settings.GetBoard() ),
+                        iOutlinePolyIdx );
+        }
 
         if( m_settings.GetFlag( FL_SHOW_BOARD_BODY ) )
         {
@@ -443,6 +449,10 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER *aStatusTextReporter )
          ++ii )
     {
         PCB_LAYER_ID layer_id = static_cast<PCB_LAYER_ID>(ii->first);
+        const CBVHCONTAINER2D *container2d = static_cast<const CBVHCONTAINER2D *>(ii->second);
+
+        if( !container2d )
+            continue;
 
         // Mask kayers are not processed here because they are a special case
         if( (layer_id == B_Mask) || (layer_id == F_Mask) )
@@ -503,7 +513,6 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER *aStatusTextReporter )
             break;
         }
 
-        const CBVHCONTAINER2D *container2d = static_cast<const CBVHCONTAINER2D *>(ii->second);
         const LIST_OBJECT2D &listObject2d = container2d->GetList();
 
         for( LIST_OBJECT2D::const_iterator itemOnLayer = listObject2d.begin();
@@ -649,6 +658,9 @@ void C3D_RENDER_RAYTRACING::reload( REPORTER *aStatusTextReporter )
             const CBVHCONTAINER2D *containerLayer2d =
                     static_cast<const CBVHCONTAINER2D *>(ii->second);
 
+            if( !containerLayer2d )
+                continue;
+
             // Only get the Solder mask layers
             if( !((layer_id == B_Mask) || (layer_id == F_Mask)) )
                 continue;

3d-viewer/3d_rendering/3d_render_raytracing/c3d_render_raytracing.cpp

@@ -28,10 +28,11 @@
  */
 
 #include <GL/glew.h>
-#include <climits>
+#include <algorithm>
 #include <atomic>
-#include <thread>
 #include <chrono>
+#include <climits>
+#include <thread>
 
 #include "c3d_render_raytracing.h"
 #include "mortoncodes.h"
@@ -2074,6 +2075,13 @@ bool C3D_RENDER_RAYTRACING::initializeOpenGL()
 }
 
 
+static float distance( const SFVEC2UI& a, const SFVEC2UI& b )
+{
+    const float dx = (float) a.x - (float) b.x;
+    const float dy = (float) a.y - (float) b.y;
+    return hypotf( dx, dy );
+}
+
 void C3D_RENDER_RAYTRACING::initialize_block_positions()
 {
 
@@ -2123,26 +2131,24 @@ void C3D_RENDER_RAYTRACING::initialize_block_positions()
     m_postshader_ssao.UpdateSize( m_realBufferSize );
 
 
-    // Calc block positions
+    // Calc block positions for regular rendering. Choose an 'inside out'
+    // style of rendering
     // /////////////////////////////////////////////////////////////////////
     m_blockPositions.clear();
-    m_blockPositions.reserve( (m_realBufferSize.x / RAYPACKET_DIM) *
-                              (m_realBufferSize.y / RAYPACKET_DIM) );
+    const int blocks_x = m_realBufferSize.x / RAYPACKET_DIM;
+    const int blocks_y = m_realBufferSize.y / RAYPACKET_DIM;
+    m_blockPositions.reserve( blocks_x * blocks_y );
 
-    i = 0;
+    for( int x = 0; x < blocks_x; ++x )
+        for( int y = 0; y < blocks_y; ++y )
+            m_blockPositions.push_back( SFVEC2UI( x * RAYPACKET_DIM, y * RAYPACKET_DIM ) );
 
-    while(1)
-    {
-        SFVEC2UI blockPos( DecodeMorton2X(i) * RAYPACKET_DIM,
-                           DecodeMorton2Y(i) * RAYPACKET_DIM );
-        i++;
-
-        if( (blockPos.x >= m_realBufferSize.x) && (blockPos.y >= m_realBufferSize.y) )
-            break;
-
-        if( (blockPos.x < m_realBufferSize.x) && (blockPos.y < m_realBufferSize.y) )
-            m_blockPositions.push_back( blockPos );
-    }
+    const SFVEC2UI center( m_realBufferSize.x / 2, m_realBufferSize.y / 2 );
+    std::sort( m_blockPositions.begin(), m_blockPositions.end(),
+            [&]( const SFVEC2UI& a, const SFVEC2UI& b ) {
+                // Sort order: inside out.
+                return distance( a, center ) < distance( b, center );
+            } );
 
     // Create m_shader buffer
     delete[] m_shaderBuffer;

3d-viewer/3d_rendering/3d_render_raytracing/shapes2D/cpolygon2d.cpp

@@ -408,17 +408,16 @@ void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
         CGENERICCONTAINER2D &aDstContainer,
         float aBiuTo3DunitsScale,
         float aDivFactor,
-        const BOARD_ITEM &aBoardItem )
+        const BOARD_ITEM &aBoardItem,
+        int aPolyIndex )
 {
-    BOX2I pathBounds = aMainPath.BBox();
-
     // Get the path
 
-    wxASSERT( aMainPath.OutlineCount() == 1 );
-    const SHAPE_POLY_SET::POLYGON& curr_polywithholes = aMainPath.CPolygon( 0 );
+    wxASSERT( aPolyIndex < aMainPath.OutlineCount() );
 
-    wxASSERT( curr_polywithholes.size() == 1 );
-    const SHAPE_LINE_CHAIN& path = curr_polywithholes[0];   // a simple polygon
+    const SHAPE_LINE_CHAIN& path = aMainPath.COutline( aPolyIndex );
+
+    BOX2I pathBounds = path.BBox();
 
     // Convert the points to segments class
     CBBOX2D bbox;
@@ -430,8 +429,10 @@ void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
     // Contains a closed polygon used to calc if points are inside
     SEGMENTS segments;
 
-    segments_and_normals.resize( path.PointCount() );
-    segments.resize( path.PointCount() );
+    segments_and_normals.reserve( path.PointCount() );
+    segments.reserve( path.PointCount() );
+
+    SFVEC2F prevPoint;
 
     for( int i = 0; i < path.PointCount(); i++ )
     {
@@ -440,9 +441,23 @@ void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
         const SFVEC2F point ( (float)( a.x) * aBiuTo3DunitsScale,
                               (float)(-a.y) * aBiuTo3DunitsScale );
 
-        bbox.Union( point );
-        segments_and_normals[i].m_Start = point;
-        segments[i].m_Start = point;
+        // Only add points that are not coincident
+        if( (i == 0) ||
+            (fabs(prevPoint.x - point.x) > FLT_EPSILON) ||
+            (fabs(prevPoint.y - point.y) > FLT_EPSILON) )
+        {
+            prevPoint = point;
+
+            bbox.Union( point );
+
+            SEGMENT_WITH_NORMALS sn;
+            sn.m_Start = point;
+            segments_and_normals.push_back( sn );
+
+            POLYSEGMENT ps;
+            ps.m_Start = point;
+            segments.push_back( ps );
+        }
     }
 
     bbox.ScaleNextUp();
@@ -518,13 +533,13 @@ void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
             segments_and_normals[i].m_Normals.m_Start = normalSeg;
         else
             segments_and_normals[i].m_Normals.m_Start =
-                glm::normalize( (((normalBeforeSeg * dotBefore ) + normalSeg) * 0.5f) );
+                glm::normalize( (normalBeforeSeg * dotBefore ) + normalSeg );
 
         if( dotAfter < 0.7f )
             segments_and_normals[i].m_Normals.m_End = normalSeg;
         else
             segments_and_normals[i].m_Normals.m_End =
-                glm::normalize( (((normalAfterSeg  * dotAfter  ) + normalSeg) * 0.5f) );
+                glm::normalize( (normalAfterSeg * dotAfter ) + normalSeg );
     }
 
     if( aDivFactor == 0.0f )
@@ -711,35 +726,6 @@ void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
 }
 
 
-void Polygon_Calc_BBox_3DU( const SHAPE_POLY_SET &aPolysList,
-                            CBBOX2D &aOutBBox ,
-                            float aBiuTo3DunitsScale )
-{
-    aOutBBox.Reset();
-
-    for( int idx = 0; idx < aPolysList.OutlineCount(); ++idx )
-    {
-        // Each polygon in aPolysList is a polygon with holes
-        const SHAPE_POLY_SET::POLYGON& curr_polywithholes = aPolysList.CPolygon( idx );
-
-        for( unsigned ipoly = 0; ipoly < curr_polywithholes.size(); ++ipoly )
-        {
-            const SHAPE_LINE_CHAIN& path = curr_polywithholes[ipoly]; // a simple polygon
-
-             for( int jj = 0; jj < path.PointCount(); jj++ )
-             {
-                 const VECTOR2I& a = path.CPoint( jj );
-
-                 aOutBBox.Union( SFVEC2F( (float) a.x * aBiuTo3DunitsScale,
-                                          (float)-a.y * aBiuTo3DunitsScale ) );
-             }
-        }
-    }
-
-    aOutBBox.ScaleNextUp();
-}
-
-
 #ifdef DEBUG
 static void polygon_Convert( const ClipperLib::Path &aPath,
                              SEGMENTS &aOutSegment,

3d-viewer/3d_rendering/3d_render_raytracing/shapes2D/cpolygon2d.h

@@ -148,11 +148,8 @@ void Convert_path_polygon_to_polygon_blocks_and_dummy_blocks(
         CGENERICCONTAINER2D &aDstContainer,
         float aBiuTo3DunitsScale,
         float aDivFactor,
-        const BOARD_ITEM &aBoardItem );
-
-void Polygon_Calc_BBox_3DU( const SHAPE_POLY_SET &aPolysList,
-                            CBBOX2D &aOutBBox,
-                            float aBiuTo3DunitsScale );
+        const BOARD_ITEM &aBoardItem,
+        int aPolyIndex );
 
 void Polygon2d_TestModule();
 

3d-viewer/3d_rendering/3d_render_raytracing/shapes2D/croundsegment2d.h

@@ -85,7 +85,7 @@ public:
     bool IsPointInside( const SFVEC2F &aPoint ) const override;
 };
 
-static const float s_min_dot = (FLT_EPSILON * 4.0f) ;
+static const float s_min_dot = (FLT_EPSILON * 4.0f * FLT_EPSILON * 4.0f) ;
 
 /**
  * @brief Segment_is_a_circle - check if segment start and end is very close to each other

3d-viewer/3d_rendering/ccamera.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2015-2016 Mario Luzeiro <mrluzeiro@ua.pt>
- * Copyright (C) 1992-2017 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2019 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -31,6 +31,17 @@
 #include <wx/log.h>
 
 
+// A helper function to normalize aAngle between -2PI and +2PI
+inline void normalise2PI( float& aAngle )
+{
+    while( aAngle > 0.0 )
+        aAngle -= M_PI*2;
+
+    while( aAngle < 0.0 )
+        aAngle += M_PI*2;
+}
+
+
 /**
  *  Trace mask used to enable or disable the trace output of this class.
  *  The debug output can be turned on by setting the WXTRACE environment variable to
@@ -95,6 +106,20 @@ void CCAMERA::Reset_T1()
     m_zoom_t1              = 1.0f;
     m_rotate_aux_t1        = SFVEC3F( 0.0f );
     m_lookat_pos_t1        = m_board_lookat_pos_init;
+
+
+    // Since 0 = 2pi, we want to reset the angle to be the closest
+    // one to where we currently are. That ensures that we rotate
+    // the board around the smallest distance getting there.
+    if( m_rotate_aux_t0.x > M_PI )
+        m_rotate_aux_t1.x = 2*M_PI;
+
+    if( m_rotate_aux_t0.y > M_PI )
+        m_rotate_aux_t1.y = 2*M_PI;
+
+    if( m_rotate_aux_t0.z > M_PI )
+        m_rotate_aux_t1.z = 2*M_PI;
+
 }
 
 
@@ -111,14 +136,17 @@ void CCAMERA::updateRotationMatrix()
     m_rotationMatrixAux = glm::rotate( glm::mat4( 1.0f ),
                                        m_rotate_aux.x,
                                        SFVEC3F( 1.0f, 0.0f, 0.0f ) );
+    normalise2PI( m_rotate_aux.x );
 
     m_rotationMatrixAux = glm::rotate( m_rotationMatrixAux,
                                        m_rotate_aux.y,
                                        SFVEC3F( 0.0f, 1.0f, 0.0f ) );
+    normalise2PI( m_rotate_aux.y );
 
     m_rotationMatrixAux = glm::rotate( m_rotationMatrixAux,
                                        m_rotate_aux.z,
                                        SFVEC3F( 0.0f, 0.0f, 1.0f ) );
+    normalise2PI( m_rotate_aux.z );
 
     m_parametersChanged = true;
 
@@ -163,7 +191,7 @@ void CCAMERA::rebuildProjection()
 
         m_projectionMatrixInv = glm::inverse( m_projectionMatrix );
 
-        m_frustum.tang = glm::tan( glm::radians( m_frustum.angle ) * 0.5f ) ;
+        m_frustum.tang = glm::tan( glm::radians( m_frustum.angle ) * 0.5f );
 
         m_focalLen.x = ( (float)m_windowSize.y / (float)m_windowSize.x ) / m_frustum.tang;
         m_focalLen.y = 1.0f / m_frustum.tang;
@@ -178,19 +206,21 @@ void CCAMERA::rebuildProjection()
 
         m_frustum.nearD = -m_frustum.farD; // Use a symmetrical clip plane for ortho projection
 
-        const float orthoReductionFactor = m_zoom / 75.0f;
+        // This formula was found by trial and error
+        const float orthoReductionFactor = glm::length( m_camera_pos_init ) *
+                                           m_zoom * m_zoom * 0.5f;
 
         // Initialize Projection Matrix for Ortographic View
-        m_projectionMatrix = glm::ortho( -m_windowSize.x * orthoReductionFactor,
-                                          m_windowSize.x * orthoReductionFactor,
-                                         -m_windowSize.y * orthoReductionFactor,
-                                          m_windowSize.y * orthoReductionFactor,
+        m_projectionMatrix = glm::ortho( -m_frustum.ratio * orthoReductionFactor,
+                                          m_frustum.ratio * orthoReductionFactor,
+                                         -orthoReductionFactor,
+                                          orthoReductionFactor,
                                           m_frustum.nearD, m_frustum.farD );
 
         m_projectionMatrixInv = glm::inverse( m_projectionMatrix );
 
-        m_frustum.nw = m_windowSize.x * orthoReductionFactor * 2.0f;
-        m_frustum.nh = m_windowSize.y * orthoReductionFactor * 2.0f;
+        m_frustum.nw = orthoReductionFactor * 2.0f * m_frustum.ratio;
+        m_frustum.nh = orthoReductionFactor * 2.0f;
         m_frustum.fw = m_frustum.nw;
         m_frustum.fh = m_frustum.nh;
 
@@ -310,7 +340,7 @@ void CCAMERA::MakeRay( const SFVEC2I &aWindowPos,
 
     case PROJECTION_ORTHO:
         aOutOrigin = up_plus_right * 0.5f + m_frustum.nc;
-        aOutDirection = -m_dir;
+        aOutDirection = -m_dir + SFVEC3F( FLT_EPSILON );
         break;
     }
 }
@@ -341,7 +371,7 @@ void CCAMERA::MakeRay( const SFVEC2F &aWindowPos, SFVEC3F &aOutOrigin, SFVEC3F &
 
     case PROJECTION_ORTHO:
         aOutOrigin = up_plus_right * 0.5f + m_frustum.nc;
-        aOutDirection = -m_dir;
+        aOutDirection = -m_dir + SFVEC3F( FLT_EPSILON );
         break;
     }
 }

3d-viewer/3d_viewer/3d_toolbar.cpp

@@ -40,100 +40,111 @@ void EDA_3D_VIEWER::ReCreateMainToolbar()
 {
     wxLogTrace( m_logTrace, "EDA_3D_VIEWER::ReCreateMainToolbar" );
 
-    if( m_mainToolBar != NULL )
-    {
-        // Simple update to the list of old files.
-        SetToolbars();
-        return;
-    }
+    wxWindowUpdateLocker dummy( this );
 
-    m_mainToolBar = new wxAuiToolBar( this, ID_H_TOOLBAR, wxDefaultPosition, wxDefaultSize,
-                                      KICAD_AUI_TB_STYLE | wxAUI_TB_HORZ_LAYOUT );
+    if( m_mainToolBar )
+    {
+        m_mainToolBar->Clear();
+    }
+    else
+    {
+        m_mainToolBar = new wxAuiToolBar( this, ID_H_TOOLBAR, wxDefaultPosition, wxDefaultSize,
+                KICAD_AUI_TB_STYLE | wxAUI_TB_HORZ_LAYOUT );
+    }
 
     // Set up toolbar
     m_mainToolBar->AddTool( ID_RELOAD3D_BOARD, wxEmptyString,
-                            KiBitmap( import3d_xpm ), _( "Reload board" ) );
+                            KiScaledBitmap( import3d_xpm, this ), _( "Reload board" ) );
 
-    m_mainToolBar->AddSeparator();
+    KiScaledSeparator( m_mainToolBar, this );
 
     m_mainToolBar->AddTool( ID_TOOL_SCREENCOPY_TOCLIBBOARD, wxEmptyString,
-                            KiBitmap( copy_xpm ),
+                            KiScaledBitmap( copy_xpm, this ),
                             _( "Copy 3D image to clipboard" ) );
 
-    m_mainToolBar->AddSeparator();
+    KiScaledSeparator( m_mainToolBar, this );
 
     m_mainToolBar->AddTool( ID_TOOL_SET_VISIBLE_ITEMS, wxEmptyString,
-                            KiBitmap( read_setup_xpm ),
+                            KiScaledBitmap( read_setup_xpm, this ),
                             _( "Set display options, and some layers visibility" ) );
     m_mainToolBar->AddSeparator();
 
-    m_mainToolBar->AddTool( ID_RENDER_CURRENT_VIEW, wxEmptyString, KiBitmap( render_mode_xpm ),
+    m_mainToolBar->AddTool( ID_RENDER_CURRENT_VIEW, wxEmptyString,
+                            KiScaledBitmap( render_mode_xpm, this ),
                             _( "Render current view using Raytracing" ), wxITEM_CHECK );
 
-    m_mainToolBar->AddSeparator();
+    KiScaledSeparator( m_mainToolBar, this );
 
-    m_mainToolBar->AddTool( ID_ZOOM_IN, wxEmptyString, KiBitmap( zoom_in_xpm ),
+    m_mainToolBar->AddTool( ID_ZOOM_IN, wxEmptyString,
+                            KiScaledBitmap( zoom_in_xpm, this ),
                             _( "Zoom in" ) );
 
-    m_mainToolBar->AddTool( ID_ZOOM_OUT, wxEmptyString, KiBitmap( zoom_out_xpm ),
+    m_mainToolBar->AddTool( ID_ZOOM_OUT, wxEmptyString,
+                            KiScaledBitmap( zoom_out_xpm, this ),
                             _( "Zoom out" ) );
 
     m_mainToolBar->AddTool( ID_ZOOM_REDRAW, wxEmptyString,
-                            KiBitmap( zoom_redraw_xpm ),
+                            KiScaledBitmap( zoom_redraw_xpm, this ),
                             _( "Redraw view" ) );
 
-    m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString, KiBitmap( zoom_fit_in_page_xpm ),
+    m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString,
+                            KiScaledBitmap( zoom_fit_in_page_xpm, this ),
                             _( "Zoom to fit 3D model" ) );
 
-    m_mainToolBar->AddSeparator();
+    KiScaledSeparator( m_mainToolBar, this );
+
     m_mainToolBar->AddTool( ID_ROTATE3D_X_NEG, wxEmptyString,
-                            KiBitmap( rotate_neg_x_xpm ),
+                            KiScaledBitmap( rotate_neg_x_xpm, this ),
                             _( "Rotate X Clockwise" ) );
 
     m_mainToolBar->AddTool( ID_ROTATE3D_X_POS, wxEmptyString,
-                            KiBitmap( rotate_pos_x_xpm ),
+                            KiScaledBitmap( rotate_pos_x_xpm, this ),
                             _( "Rotate X Counterclockwise" ) );
 
-    m_mainToolBar->AddSeparator();
+    KiScaledSeparator( m_mainToolBar, this );
+
     m_mainToolBar->AddTool( ID_ROTATE3D_Y_NEG, wxEmptyString,
-                            KiBitmap( rotate_neg_y_xpm ),
+                            KiScaledBitmap( rotate_neg_y_xpm, this ),
                             _( "Rotate Y Clockwise" ) );
 
     m_mainToolBar->AddTool( ID_ROTATE3D_Y_POS, wxEmptyString,
-                            KiBitmap( rotate_pos_y_xpm ),
+                            KiScaledBitmap( rotate_pos_y_xpm, this ),
                             _( "Rotate Y Counterclockwise" ) );
 
-    m_mainToolBar->AddSeparator();
+    KiScaledSeparator( m_mainToolBar, this );
+
     m_mainToolBar->AddTool( ID_ROTATE3D_Z_NEG, wxEmptyString,
-                            KiBitmap( rotate_neg_z_xpm ),
+                            KiScaledBitmap( rotate_neg_z_xpm, this ),
                             _( "Rotate Z Clockwise" ) );
 
     m_mainToolBar->AddTool( ID_ROTATE3D_Z_POS, wxEmptyString,
-                            KiBitmap( rotate_pos_z_xpm ),
+                            KiScaledBitmap( rotate_pos_z_xpm, this ),
                             _( "Rotate Z Counterclockwise" ) );
 
-    m_mainToolBar->AddSeparator();
-    m_mainToolBar->AddTool( ID_MOVE3D_LEFT, wxEmptyString, KiBitmap( left_xpm ),
+    KiScaledSeparator( m_mainToolBar, this );
+
+    m_mainToolBar->AddTool( ID_MOVE3D_LEFT, wxEmptyString,
+                            KiScaledBitmap( left_xpm, this ),
                             _( "Move left" ) );
 
-    m_mainToolBar->AddTool( ID_MOVE3D_RIGHT, wxEmptyString, KiBitmap( right_xpm ),
+    m_mainToolBar->AddTool( ID_MOVE3D_RIGHT, wxEmptyString,
+                            KiScaledBitmap( right_xpm, this ),
                             _( "Move right" ) );
 
-    m_mainToolBar->AddTool( ID_MOVE3D_UP, wxEmptyString, KiBitmap( up_xpm ),
+    m_mainToolBar->AddTool( ID_MOVE3D_UP, wxEmptyString,
+                            KiScaledBitmap( up_xpm, this ),
                             _( "Move up" ) );
 
-    m_mainToolBar->AddTool( ID_MOVE3D_DOWN, wxEmptyString, KiBitmap( down_xpm ),
+    m_mainToolBar->AddTool( ID_MOVE3D_DOWN, wxEmptyString,
+                            KiScaledBitmap( down_xpm, this ),
                             _( "Move down" ) );
 
-    m_mainToolBar->AddSeparator();
-    m_mainToolBar->AddTool( ID_ORTHO, wxEmptyString, KiBitmap( ortho_xpm ),
+    KiScaledSeparator( m_mainToolBar, this );
+
+    m_mainToolBar->AddTool( ID_ORTHO, wxEmptyString,
+                            KiScaledBitmap( ortho_xpm, this ),
                             _( "Enable/Disable orthographic projection" ),
                             wxITEM_CHECK );
 
     m_mainToolBar->Realize();
-}
-
-
-void EDA_3D_VIEWER::SetToolbars()
-{
-}
+}

3d-viewer/3d_viewer/dialogs/dialog_3D_view_option_base.cpp

@@ -1,5 +1,5 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jul 11 2018)
+// C++ code generated with wxFormBuilder (version 3.9.0 Nov  1 2020)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
@@ -12,251 +12,252 @@
 DIALOG_3D_VIEW_OPTIONS_BASE::DIALOG_3D_VIEW_OPTIONS_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : DIALOG_SHIM( parent, id, title, pos, size, style )
 {
 	this->SetSizeHints( wxDefaultSize, wxDefaultSize );
-	
+
 	wxBoxSizer* bSizerMain;
 	bSizerMain = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxBoxSizer* bSizerUpper;
 	bSizerUpper = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	wxBoxSizer* bSizeLeft;
 	bSizeLeft = new wxBoxSizer( wxVERTICAL );
-	
+
 	m_staticText3DRenderOpts = new wxStaticText( this, wxID_ANY, _("Render options:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText3DRenderOpts->Wrap( -1 );
 	m_staticText3DRenderOpts->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD, false, wxEmptyString ) );
-	
+
 	bSizeLeft->Add( m_staticText3DRenderOpts, 0, wxALL, 5 );
-	
+
 	wxFlexGridSizer* fgSizerRenderOptions;
 	fgSizerRenderOptions = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerRenderOptions->SetFlexibleDirection( wxBOTH );
 	fgSizerRenderOptions->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
-	
+
+
 	fgSizerRenderOptions->Add( 0, 0, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapRealisticMode = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_bitmapRealisticMode, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxRealisticMode = new wxCheckBox( this, wxID_ANY, _("Realistic mode"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_checkBoxRealisticMode, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerRenderOptions->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapBoardBody = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_bitmapBoardBody, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxBoardBody = new wxCheckBox( this, wxID_ANY, _("Show board body"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_checkBoxBoardBody, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerRenderOptions->Add( 0, 0, 1, wxEXPAND, 5 );
-	
+
 	m_bitmapCuThickness = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_bitmapCuThickness, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxCuThickness = new wxCheckBox( this, wxID_ANY, _("Show copper thickness"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_checkBoxCuThickness, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerRenderOptions->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapBoundingBoxes = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_bitmapBoundingBoxes, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxBoundingBoxes = new wxCheckBox( this, wxID_ANY, _("Show model bounding boxes"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_checkBoxBoundingBoxes, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerRenderOptions->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapAreas = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_bitmapAreas, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxAreas = new wxCheckBox( this, wxID_ANY, _("Show filled areas in zones"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerRenderOptions->Add( m_checkBoxAreas, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	wxFlexGridSizer* fgSizer3;
 	fgSizer3 = new wxFlexGridSizer( 0, 2, 0, 0 );
 	fgSizer3->SetFlexibleDirection( wxBOTH );
 	fgSizer3->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
-	
+
+
 	fgSizerRenderOptions->Add( fgSizer3, 1, wxEXPAND, 5 );
-	
-	
+
+
 	bSizeLeft->Add( fgSizerRenderOptions, 0, wxEXPAND|wxBOTTOM, 5 );
-	
-	
+
+
 	bSizeLeft->Add( 0, 10, 0, 0, 5 );
-	
+
 	m_staticText3DmodelVisibility = new wxStaticText( this, wxID_ANY, _("3D model visibility:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticText3DmodelVisibility->Wrap( -1 );
 	m_staticText3DmodelVisibility->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD, false, wxEmptyString ) );
-	
+
 	bSizeLeft->Add( m_staticText3DmodelVisibility, 0, wxALL, 5 );
-	
+
 	wxFlexGridSizer* fgSizer3DVisibility;
 	fgSizer3DVisibility = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizer3DVisibility->SetFlexibleDirection( wxBOTH );
 	fgSizer3DVisibility->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
-	
+
+
 	fgSizer3DVisibility->Add( 0, 0, 1, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmap3DshapesTH = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer3DVisibility->Add( m_bitmap3DshapesTH, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBox3DshapesTH = new wxCheckBox( this, wxID_ANY, _("Show 3D through hole models"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer3DVisibility->Add( m_checkBox3DshapesTH, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizer3DVisibility->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmap3DshapesSMD = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer3DVisibility->Add( m_bitmap3DshapesSMD, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBox3DshapesSMD = new wxCheckBox( this, wxID_ANY, _("Show 3D SMD models"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer3DVisibility->Add( m_checkBox3DshapesSMD, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizer3DVisibility->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmap3DshapesVirtual = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer3DVisibility->Add( m_bitmap3DshapesVirtual, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBox3DshapesVirtual = new wxCheckBox( this, wxID_ANY, _("Show 3D virtual models"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer3DVisibility->Add( m_checkBox3DshapesVirtual, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	bSizeLeft->Add( fgSizer3DVisibility, 0, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerUpper->Add( bSizeLeft, 1, wxEXPAND, 5 );
-	
+
 	m_staticlineVertical = new wxStaticLine( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_VERTICAL );
 	bSizerUpper->Add( m_staticlineVertical, 0, wxEXPAND | wxALL, 5 );
-	
+
 	wxBoxSizer* bSizerRight;
 	bSizerRight = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	wxBoxSizer* bSizeLayer;
 	bSizeLayer = new wxBoxSizer( wxVERTICAL );
-	
+
 	m_staticTextBoardLayers = new wxStaticText( this, wxID_ANY, _("Board layers:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextBoardLayers->Wrap( -1 );
 	m_staticTextBoardLayers->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD, false, wxEmptyString ) );
-	
+
 	bSizeLayer->Add( m_staticTextBoardLayers, 0, wxALL, 5 );
-	
+
 	wxFlexGridSizer* fgSizerShowBrdLayersOpts;
 	fgSizerShowBrdLayersOpts = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerShowBrdLayersOpts->SetFlexibleDirection( wxBOTH );
 	fgSizerShowBrdLayersOpts->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
-	
+
+
 	fgSizerShowBrdLayersOpts->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapSilkscreen = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_bitmapSilkscreen, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxSilkscreen = new wxCheckBox( this, wxID_ANY, _("Show silkscreen layers"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_checkBoxSilkscreen, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5 );
-	
-	
+
+
 	fgSizerShowBrdLayersOpts->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapSolderMask = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_bitmapSolderMask, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxSolderMask = new wxCheckBox( this, wxID_ANY, _("Show solder mask layers"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_checkBoxSolderMask, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerShowBrdLayersOpts->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapSolderPaste = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_bitmapSolderPaste, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxSolderpaste = new wxCheckBox( this, wxID_ANY, _("Show solder paste layers"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_checkBoxSolderpaste, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerShowBrdLayersOpts->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapAdhesive = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_bitmapAdhesive, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxAdhesive = new wxCheckBox( this, wxID_ANY, _("Show adhesive layers"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowBrdLayersOpts->Add( m_checkBoxAdhesive, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	bSizeLayer->Add( fgSizerShowBrdLayersOpts, 0, wxEXPAND, 5 );
-	
-	
+
+
 	bSizeLayer->Add( 0, 10, 0, 0, 5 );
-	
+
 	m_staticTextUserLayers = new wxStaticText( this, wxID_ANY, _("User layers (not shown in realistic mode):"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextUserLayers->Wrap( -1 );
 	m_staticTextUserLayers->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD, false, wxEmptyString ) );
-	
+
 	bSizeLayer->Add( m_staticTextUserLayers, 0, wxALL, 5 );
-	
+
 	wxFlexGridSizer* fgSizerShowUserLayersOpts;
 	fgSizerShowUserLayersOpts = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerShowUserLayersOpts->SetFlexibleDirection( wxBOTH );
 	fgSizerShowUserLayersOpts->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
-	
+
+
 	fgSizerShowUserLayersOpts->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapComments = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowUserLayersOpts->Add( m_bitmapComments, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxComments = new wxCheckBox( this, wxID_ANY, _("Show comments and drawings layers"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowUserLayersOpts->Add( m_checkBoxComments, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerShowUserLayersOpts->Add( 0, 0, 0, wxRIGHT|wxLEFT, 10 );
-	
+
 	m_bitmapECO = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowUserLayersOpts->Add( m_bitmapECO, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_checkBoxECO = new wxCheckBox( this, wxID_ANY, _("Show ECO layers"), wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerShowUserLayersOpts->Add( m_checkBoxECO, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	bSizeLayer->Add( fgSizerShowUserLayersOpts, 0, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerRight->Add( bSizeLayer, 1, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerUpper->Add( bSizerRight, 1, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerMain->Add( bSizerUpper, 1, wxEXPAND, 5 );
-	
+
 	m_staticlineH = new wxStaticLine( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
 	bSizerMain->Add( m_staticlineH, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxEXPAND, 5 );
-	
+
 	m_sdbSizer = new wxStdDialogButtonSizer();
 	m_sdbSizerOK = new wxButton( this, wxID_OK );
 	m_sdbSizer->AddButton( m_sdbSizerOK );
 	m_sdbSizerCancel = new wxButton( this, wxID_CANCEL );
 	m_sdbSizer->AddButton( m_sdbSizerCancel );
 	m_sdbSizer->Realize();
-	
+
 	bSizerMain->Add( m_sdbSizer, 0, wxALL|wxALIGN_RIGHT, 5 );
-	
-	
+
+
 	this->SetSizer( bSizerMain );
 	this->Layout();
-	
+	bSizerMain->Fit( this );
+
 	this->Centre( wxBOTH );
-	
+
 	// Connect Events
 	m_checkBoxRealisticMode->Connect( wxEVT_COMMAND_CHECKBOX_CLICKED, wxCommandEventHandler( DIALOG_3D_VIEW_OPTIONS_BASE::OnCheckRealisticMode ), NULL, this );
 }
@@ -265,5 +266,5 @@ DIALOG_3D_VIEW_OPTIONS_BASE::~DIALOG_3D_VIEW_OPTIONS_BASE()
 {
 	// Disconnect Events
 	m_checkBoxRealisticMode->Disconnect( wxEVT_COMMAND_CHECKBOX_CLICKED, wxCommandEventHandler( DIALOG_3D_VIEW_OPTIONS_BASE::OnCheckRealisticMode ), NULL, this );
-	
+
 }

3d-viewer/3d_viewer/dialogs/dialog_3D_view_option_base.h

@@ -1,12 +1,11 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jul 11 2018)
+// C++ code generated with wxFormBuilder (version 3.9.0 Nov  1 2020)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
 ///////////////////////////////////////////////////////////////////////////
 
-#ifndef __DIALOG_3D_VIEW_OPTION_BASE_H__
-#define __DIALOG_3D_VIEW_OPTION_BASE_H__
+#pragma once
 
 #include <wx/artprov.h>
 #include <wx/xrc/xmlres.h>
@@ -37,7 +36,7 @@
 class DIALOG_3D_VIEW_OPTIONS_BASE : public DIALOG_SHIM
 {
 	private:
-	
+
 	protected:
 		wxStaticText* m_staticText3DRenderOpts;
 		wxStaticBitmap* m_bitmapRealisticMode;
@@ -76,16 +75,15 @@ class DIALOG_3D_VIEW_OPTIONS_BASE : public DIALOG_SHIM
 		wxStdDialogButtonSizer* m_sdbSizer;
 		wxButton* m_sdbSizerOK;
 		wxButton* m_sdbSizerCancel;
-		
+
 		// Virtual event handlers, overide them in your derived class
 		virtual void OnCheckRealisticMode( wxCommandEvent& event ) { event.Skip(); }
-		
-	
+
+
 	public:
-		
-		DIALOG_3D_VIEW_OPTIONS_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("3D Display Options"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 571,372 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER ); 
+
+		DIALOG_3D_VIEW_OPTIONS_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("3D Display Options"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
 		~DIALOG_3D_VIEW_OPTIONS_BASE();
-	
+
 };
 
-#endif //__DIALOG_3D_VIEW_OPTION_BASE_H__

3d-viewer/3d_viewer/eda_3d_viewer.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2015-2016 Mario Luzeiro <mrluzeiro@ua.pt>
- * Copyright (C) 1992-2019 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2020 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -22,24 +22,29 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
  */
 
-/**
- * @file  eda_3d_viewer.cpp
- * @brief Implements a 3d viewer windows GUI
- */
-
+#include <wx/colordlg.h>
+#include <wx/colour.h>
+#include <wx/filename.h>
+#include <wx/string.h>
+#include <wx/wupdlock.h>
+#include <wx/clipbrd.h>
 #include "eda_3d_viewer.h"
+
 #include "../3d_viewer_id.h"
-#include <project.h>
+#include "../common_ogl/cogl_att_list.h"
+
+#include <bitmaps.h>
+#include <dpi_scaling.h>
 #include <gestfich.h>
+#include <lru_cache.h>
+#include <pgm_base.h>
+#include <project.h>
 #include <wildcards_and_files_ext.h>
+
+#include <hotkeys_basic.h>
 #include <wx/colordlg.h>
 #include <wx/colourdata.h>
-#include <lru_cache.h>
-#include  "../common_ogl/cogl_att_list.h"
-#include <hotkeys_basic.h>
 #include <wx/toolbar.h>
-#include <bitmaps.h>
-#include <pgm_base.h>
 
 
 /**
@@ -162,16 +167,14 @@ EDA_3D_VIEWER::EDA_3D_VIEWER( KIWAY *aKiway, PCB_BASE_FRAME *aParent,
 
     m_canvas = NULL;
     m_disable_ray_tracing = false;
+    m_mainToolBar = nullptr;
+    m_AboutTitle = "3D Viewer";
 
     // Give it an icon
     wxIcon icon;
     icon.CopyFromBitmap( KiBitmap( icon_3d_xpm ) );
     SetIcon( icon );
 
-    bool option;
-    Pgm().CommonSettings()->Read( ENBL_MOUSEWHEEL_PAN_KEY, &option, false );
-    m_settings.SetFlag( FL_MOUSEWHEEL_PANNING, option );
-
     LoadSettings( config() );
     SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
 
@@ -190,6 +193,9 @@ EDA_3D_VIEWER::EDA_3D_VIEWER( KIWAY *aKiway, PCB_BASE_FRAME *aParent,
     if( m_canvas )
         m_canvas->SetStatusBar( status_bar );
 
+    // Some settings need the canvas
+    loadCommonSettings();
+
     CreateMenuBar();
     ReCreateMainToolbar();
 
@@ -266,6 +272,7 @@ void EDA_3D_VIEWER::OnCloseWindow( wxCloseEvent &event )
     event.Skip( true );
 }
 
+
 #define ROT_ANGLE 10.0
 
 void EDA_3D_VIEWER::Process_Special_Functions( wxCommandEvent &event )
@@ -287,33 +294,63 @@ void EDA_3D_VIEWER::Process_Special_Functions( wxCommandEvent &event )
         break;
 
     case ID_ROTATE3D_X_POS:
-        m_settings.CameraGet().RotateX( glm::radians(ROT_ANGLE) );
-        m_canvas->Request_refresh();
+        m_settings.CameraGet().RotateX( glm::radians( ROT_ANGLE ) );
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
+
         break;
 
     case ID_ROTATE3D_X_NEG:
-        m_settings.CameraGet().RotateX( -glm::radians(ROT_ANGLE) );
-        m_canvas->Request_refresh();
+        m_settings.CameraGet().RotateX( -glm::radians( ROT_ANGLE ) );
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
+
         break;
 
     case ID_ROTATE3D_Y_POS:
         m_settings.CameraGet().RotateY( glm::radians(ROT_ANGLE) );
-        m_canvas->Request_refresh();
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
+
         break;
 
     case ID_ROTATE3D_Y_NEG:
         m_settings.CameraGet().RotateY( -glm::radians(ROT_ANGLE) );
-        m_canvas->Request_refresh();
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
+
         break;
 
     case ID_ROTATE3D_Z_POS:
         m_settings.CameraGet().RotateZ( glm::radians(ROT_ANGLE) );
-        m_canvas->Request_refresh();
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
+
         break;
 
     case ID_ROTATE3D_Z_NEG:
         m_settings.CameraGet().RotateZ( -glm::radians(ROT_ANGLE) );
-        m_canvas->Request_refresh();
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
+
         break;
 
     case ID_MOVE3D_LEFT:
@@ -334,7 +371,11 @@ void EDA_3D_VIEWER::Process_Special_Functions( wxCommandEvent &event )
 
     case ID_ORTHO:
         m_settings.CameraGet().ToggleProjection();
-        m_canvas->Request_refresh();
+
+        if( m_settings.RenderEngineGet() == RENDER_ENGINE_OPENGL_LEGACY )
+            m_canvas->Request_refresh();
+        else
+            m_canvas->RenderRaytracingRequest();
         return;
 
     case ID_TOOL_SCREENCOPY_TOCLIBBOARD:
@@ -642,11 +683,11 @@ void EDA_3D_VIEWER::OnDisableRayTracing( wxCommandEvent& aEvent )
 }
 
 
-void EDA_3D_VIEWER::OnActivate( wxActivateEvent &event )
+void EDA_3D_VIEWER::OnActivate( wxActivateEvent &aEvent )
 {
     wxLogTrace( m_logTrace, "EDA_3D_VIEWER::OnActivate" );
 
-    if( m_canvas )
+    if( aEvent.GetActive() && m_canvas )
     {
         // Reload data if 3D frame shows a board,
         // because it can be changed since last frame activation
@@ -657,17 +698,17 @@ void EDA_3D_VIEWER::OnActivate( wxActivateEvent &event )
         m_canvas->SetFocus();
     }
 
-    event.Skip();    // required under wxMAC
+    aEvent.Skip(); // required under wxMAC
 }
 
 
-void EDA_3D_VIEWER::OnSetFocus(wxFocusEvent &event)
+void EDA_3D_VIEWER::OnSetFocus( wxFocusEvent& aEvent )
 {
     // Activates again the focus of the canvas so it will catch mouse and key events
     if( m_canvas )
         m_canvas->SetFocus();
 
-    event.Skip();
+    aEvent.Skip();
 }
 
 
@@ -726,7 +767,7 @@ void EDA_3D_VIEWER::LoadSettings( wxConfigBase *aCfg )
     aCfg->Read( keyRenderRAY_Shadows, &tmp, true );
     m_settings.SetFlag( FL_RENDER_RAYTRACING_SHADOWS, tmp );
 
-    aCfg->Read( keyRenderRAY_Backfloor, &tmp, true );
+    aCfg->Read( keyRenderRAY_Backfloor, &tmp, false );
     m_settings.SetFlag( FL_RENDER_RAYTRACING_BACKFLOOR, tmp );
 
     aCfg->Read( keyRenderRAY_Refractions, &tmp, true );
@@ -869,6 +910,22 @@ void EDA_3D_VIEWER::SaveSettings( wxConfigBase *aCfg )
 }
 
 
+void EDA_3D_VIEWER::CommonSettingsChanged()
+{
+    wxLogTrace( m_logTrace, "EDA_3D_VIEWER::CommonSettingsChanged" );
+
+    // Regen menu bars, etc
+    EDA_BASE_FRAME::CommonSettingsChanged();
+
+    // There is no base class that handles toolbars for this frame
+    ReCreateMainToolbar();
+
+    loadCommonSettings();
+
+    NewDisplay( true );
+}
+
+
 void EDA_3D_VIEWER::OnLeftClick( wxDC *DC, const wxPoint &MousePos )
 {
     wxLogTrace( m_logTrace, "EDA_3D_VIEWER::OnLeftClick" );
@@ -934,6 +991,17 @@ void EDA_3D_VIEWER::takeScreenshot( wxCommandEvent& event )
 
         fullFileName = m_defaultSaveScreenshotFileName.GetFullPath();
 
+        wxFileName fn = fullFileName;
+
+        if( !fn.IsDirWritable() )
+        {
+            wxString msg;
+
+            msg.Printf( _( "Insufficient permissions required to save file\n%s" ), fullFileName );
+            wxMessageBox( msg, _( "Error" ), wxOK | wxICON_ERROR, this );
+            return;
+        }
+
         // Be sure the screen area destroyed by the file dialog is redrawn
         // before making a screen copy.
         // Without this call, under Linux the screen refresh is made to late.
@@ -941,7 +1009,7 @@ void EDA_3D_VIEWER::takeScreenshot( wxCommandEvent& event )
     }
 
     // Be sure we have the latest 3D view (remember 3D view is buffered)
-    Refresh();
+    m_canvas->Request_refresh( true );
     wxYield();
 
     // Build image from the 3D buffer
@@ -1225,3 +1293,22 @@ void EDA_3D_VIEWER::OnUpdateUIAxis( wxUpdateUIEvent& aEvent )
 {
     aEvent.Check( m_settings.GetFlag( FL_AXIS ) );
 }
+
+
+void EDA_3D_VIEWER::loadCommonSettings()
+{
+    wxCHECK_RET( m_canvas, "Cannot load settings to null canvas" );
+
+    wxConfigBase& cmnCfg = *Pgm().CommonSettings();
+
+    {
+        const DPI_SCALING dpi{ &cmnCfg, this };
+        m_canvas->SetScaleFactor( dpi.GetScaleFactor() );
+    }
+
+    {
+        bool option;
+        cmnCfg.Read( ENBL_MOUSEWHEEL_PAN_KEY, &option, false );
+        m_settings.SetFlag( FL_MOUSEWHEEL_PANNING, option );
+    }
+}

3d-viewer/3d_viewer/eda_3d_viewer.h

@@ -154,6 +154,15 @@ class EDA_3D_VIEWER : public KIWAY_PLAYER
      */
     bool Set3DSilkScreenColorFromUser();
 
+    /**
+     * Notification that common settings are updated.
+     *
+     * This would be private (and only called by the Kiway), but we
+     * need to do this manually from the PCB frame because the 3D viewer isn't
+     * updated via the #KIWAY.
+     */
+    void CommonSettingsChanged() override;
+
  private:
     /// Called when user press the File->Exit
     void Exit3DFrame( wxCommandEvent &event );
@@ -188,6 +197,9 @@ class EDA_3D_VIEWER : public KIWAY_PLAYER
         DisplayHotkeyList( this, GetHotkeyConfig() );
     }
 
+    /**
+     * Equivalent of EDA_DRAW_FRAME::ReCreateHToolbar
+     */
     void ReCreateMainToolbar();
 
     void SetToolbars();
@@ -217,6 +229,11 @@ class EDA_3D_VIEWER : public KIWAY_PLAYER
 
  private:
 
+    /**
+     * Load configuration from common settings.
+     */
+    void loadCommonSettings();
+
     /**
      *  Filename to propose for save a screenshot
      */

3d-viewer/3d_viewer_id.h

@@ -103,6 +103,8 @@ enum id_3dview_frm
 
     ID_DISABLE_RAY_TRACING,
 
+    ID_CUSTOM_EVENT_1,      // A id for a custom event (canvas refresh request)
+
     ID_POPUP_3D_VIEW_START,
     ID_POPUP_ZOOMIN,
     ID_POPUP_ZOOMOUT,

AUTHORS.txt

@@ -1,5 +1,5 @@
 * Copyright (C) 1992-2015 Jean-Pierre Charras
-* Copyright (C) 1992-2017 Kicad Developers Team
+* Copyright (C) 1992-2019 Kicad Developers Team
 * under GNU General Public License (see copyright.txt)
 
 == Main Authors
@@ -46,16 +46,17 @@ Russell Oliver <roliver8143[at]gmail-dot-com>
 Seth Hillbrand <hillbrand[at]ucdavis-dot-edu>
 Jeff Young <jeff[at]rokeby-dot-ie>
 Kevin Cozens <kevin[at]ve3syb-dot-ca>
+Ian McInerney <ian.s.mcinerney[at]ieee-dot-org>
 
-See git repo on launchpad for contributors at
-https://code.launchpad.net/~kicad-product-committers/kicad/+git/product-git/+ref/master.
+See git repo on GitLab for contributors at
+https://gitlab.com/kicad/code/kicad/-/graphs/master
 
 
 == Document Writers
 Jean-Pierre Charras <jean-pierre.charras[at]gipsa-lab.inpg-dot-fr>
 Igor Plyatov <plyatov[at]gmail-dot-com>
 Fabrizio Tappero <fabrizio-dot-tappero[at]gmail-dot-com>
-Marco Ciampa <ciampix[at]libero-dot-it>
+Marco Ciampa <ciampix[at]posteo-dot-net>
 Wayne Stambaugh <stambaughw[at]gmail-dot-com
 
 
@@ -64,6 +65,7 @@ Czech (CZ) Martin Kratoška <martin[at]ok1rr-dot-com>
 Dutch (NL) Jerry Jacobs <xor.gate.engineering[at]gmail-dot-com>
 Finnish (FI) Vesa Solonen <vesa.solonen[at]hut-dot-fi>
 French (FR) Jean-Pierre Charras <jean-pierre.charras[at]inpg-dot-fr>
+Italian (IT) Marco Ciampa  <ciampix[at]posteo-dot-net>
 Polish (PL) Mateusz Skowro¿ski <skowri[at]gmail-dot-com>
 Polish (PL) Kerusey Karyu <keruseykaryu[at]o2.pl>
 Portuguese (PT) Renie Marquet <reniemarquet[at]uol-dot-com-dot-br>"
@@ -74,6 +76,7 @@ Spanish (ES) Pedro Martin del Valle <pkicad[at]yahoo-dot-es>
 Spanish (ES) Iñigo Zuluaga <inigo_zuluaga[at]yahoo-dot-es>
 German (DE) Rafael Sokolowski <Rafael.Sokolowski[at]web-dot-de
 Japanese (JA) Kenta Yonekura <yoneken[at]kicad-dot-jp>
+Simplified Chinese (zh_CN) taotieren <admin[at]taotieren-dot-com>
 
 Remy Halvick, David Briscoe, Dominique Laigle, Paul Burke
 

CMakeLists.txt

@@ -21,14 +21,7 @@
 #  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 #
 
-cmake_minimum_required( VERSION 2.8.12 FATAL_ERROR )
-# because of http://public.kitware.com/Bug/view.php?id=10395
-
-# See https://gitlab.kitware.com/cmake/cmake/issues/15943
-# Remove as soon as 3.1 is minimum required version
-if(POLICY CMP0025)
-  cmake_policy(SET CMP0025 NEW) # CMake 3.0
-endif()
+cmake_minimum_required( VERSION 3.2 FATAL_ERROR )
 
 # Default to CMAKE_BUILD_TYPE = Release unless overridden on command line
 # http://www.cmake.org/pipermail/cmake/2008-September/023808.html
@@ -64,7 +57,7 @@ option( USE_WX_GRAPHICS_CONTEXT
     "Use wxGraphicsContext for rendering (default OFF).  Warning, this is experimental" )
 
 option( USE_WX_OVERLAY
-    "Use wxOverlay: Always ON for MAC (default OFF).  Warning, this is experimental" )
+    "Use wxOverlay: Always ON for MAC and GTK3 (default OFF)." )
 
 option( KICAD_SCRIPTING
     "Build the Python scripting support inside KiCad binaries (default ON)."
@@ -91,39 +84,54 @@ option( KICAD_SCRIPTING_ACTION_MENU
     ON )
 
 option( KICAD_USE_OCE
-    "Build tools and plugins related to OpenCascade Community Edition (default ON)"
-    ON )
+    "Build tools and plugins related to OpenCascade Community Edition (default OFF)"
+    OFF )
 
 option( KICAD_USE_OCC
-    "Build tools and plugins related to OpenCascade Technology (overrides KICAD_USE_OCE, default OFF)"
-    OFF )
+    "Build tools and plugins related to OpenCascade Technology (overrides KICAD_USE_OCE, default ON)"
+    ON )
 
 option( KICAD_INSTALL_DEMOS
     "Install KiCad demos and examples (default ON)"
     ON )
 
+option( KICAD_BUILD_QA_TESTS
+    "Build software Quality assurance unit tests (default ON)"
+    ON )
+
+option( BUILD_GITHUB_PLUGIN
+    "Build the GITHUB_PLUGIN for pcbnew."
+    ON )
+
+option( KICAD_SPICE
+    "Build KiCad with internal Spice simulator."
+    ON )
+
 # when option KICAD_SCRIPTING OR KICAD_SCRIPTING_MODULES is enabled:
 # PYTHON_EXECUTABLE can be defined when invoking cmake
 # ( use -DPYTHON_EXECUTABLE=<python path>/python.exe or python2 )
 # when not defined by user, the default is python.exe under Windows and python2 for others
 # python binary file should be in exec path.
 
-# KICAD_SCRIPTING_MODULES requires KICAD_SCRIPTING enable it here if KICAD_SCRIPTING_MODULES is ON
-if ( KICAD_SCRIPTING_MODULES AND NOT KICAD_SCRIPTING )
-    message(STATUS "Changing KICAD_SCRIPTING to ON as needed by KICAD_SCRIPTING_MODULES")
-    set ( KICAD_SCRIPTING ON )
+# KICAD_SCRIPTING controls the entire python scripting system. If it is off, no other scripting
+# functions are available.
+if ( NOT KICAD_SCRIPTING )
+    message( STATUS "KICAD_SCRIPTING is OFF: Disabling all python scripting support" )
+    set( KICAD_SCRIPTING_MODULES OFF )
+    set( KICAD_SCRIPTING_ACTION_MENU OFF )
+    set( KICAD_SCRIPTING_PYTHON3 OFF )
+    set( KICAD_SCRIPTING_WXPYTHON OFF )
+    set( KICAD_SCRIPTING_WXPYTHON_PHOENIX OFF)
 endif()
 
-# same with KICAD_SCRIPTING_ACTION_MENUS
-if ( KICAD_SCRIPTING_ACTION_MENU AND NOT KICAD_SCRIPTING )
-    message(STATUS "Changing KICAD_SCRIPTING to ON as needed by KICAD_SCRIPTING_ACTION_MENU")
-    set ( KICAD_SCRIPTING ON )
+# KICAD_SCRIPTING_WXPYTHON_PHOENIX requires enabling the KICAD_SCRIPTING_WXPYTHON flag
+# so that the wxWidgets library is properly versioned
+if ( KICAD_SCRIPTING AND NOT KICAD_SCRIPTING_WXPYTHON AND KICAD_SCRIPTING_WXPYTHON_PHOENIX )
+    message( STATUS
+        "KICAD_SCRIPTING_WXPYTHON_PHOENIX has been requested, setting KICAD_SCRIPTING_WXPYTHON to ON")
+    set( KICAD_SCRIPTING_WXPYTHON ON)
 endif()
 
-option( BUILD_GITHUB_PLUGIN "Build the GITHUB_PLUGIN for pcbnew." ON )
-
-option( KICAD_SPICE "Build KiCad with internal Spice simulator." ON )
-
 # Global setting: exports are explicit
 set( CMAKE_CXX_VISIBILITY_PRESET "hidden" )
 set( CMAKE_VISIBILITY_INLINES_HIDDEN ON )
@@ -185,24 +193,6 @@ include( PerformFeatureChecks )
 perform_feature_checks()
 
 
-# Workaround: CMake < 3.1 does not support CMAKE_CXX_STANDARD
-if( NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 3.1 )
-    message( FATAL_ERROR "Remove compatibility code" )
-endif()
-
-if( CMAKE_VERSION VERSION_LESS 3.1 AND ( CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" ) )
-    include(CheckCXXCompilerFlag)
-
-    CHECK_CXX_COMPILER_FLAG("-std=c++11" COMPILER_SUPPORTS_CXX11)
-
-    if(COMPILER_SUPPORTS_CXX11)
-        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
-    else()
-        message(STATUS "The compiler ${CMAKE_CXX_COMPILER} has no C++11 support. Please use a different C++ compiler.")
-    endif()
-endif()
-
-
 # Warn about missing override specifiers, if supported
 if( CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
     include(CheckCXXCompilerFlag)
@@ -266,7 +256,7 @@ endif(USE_CCACHE)
 
 
 #================================================
-# Provide access to CCACHE
+# Provide access to DISTCC
 #================================================
 if (USE_DISTCC)
   find_program(DISTCC_FOUND distcc)
@@ -287,18 +277,9 @@ endif(USE_DISTCC)
 
 if( CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
 
-    execute_process( COMMAND ${CMAKE_C_COMPILER} -dumpversion
-        OUTPUT_VARIABLE GCC_VERSION
-        OUTPUT_STRIP_TRAILING_WHITESPACE )
-
-    if( CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
-        set( TO_LINKER -XLinker )
-    else()
-        set( TO_LINKER -Wl )
-        # Set 32-bit flag for GCC to prevent excess precision
-        if( CMAKE_SIZEOF_VOID_P EQUAL 4 )
-            set( CMAKE_CXX_FLAGS "-ffloat-store ${CMAKE_CXX_FLAGS}" )
-        endif()
+    # Set 32-bit flag for GCC to prevent excess precision
+    if( CMAKE_SIZEOF_VOID_P EQUAL 4 )
+        set( CMAKE_CXX_FLAGS "-ffloat-store ${CMAKE_CXX_FLAGS}" )
     endif()
 
     # Establish -Wall early, so specialized relaxations of this may come
@@ -347,29 +328,21 @@ if( CMAKE_COMPILER_IS_GNUCXX OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
         # snprintf
         add_definitions(-D__USE_MINGW_ANSI_STDIO=1)
 
-    else()
-        if( NOT APPLE )
-            # Thou shalt not link vaporware and tell us it's a valid DSO (apple ld doesn't support it)
-            set( CMAKE_SHARED_LINKER_FLAGS "${TO_LINKER},--no-undefined" )
-            set( CMAKE_MODULE_LINKER_FLAGS "${TO_LINKER},--no-undefined" )
+    elseif( NOT APPLE )
+        # Thou shalt not link vaporware and tell us it's a valid DSO (apple ld doesn't support it)
+        set( CMAKE_SHARED_LINKER_FLAGS "-Wl,--no-undefined" )
+        set( CMAKE_MODULE_LINKER_FLAGS "-Wl,--no-undefined" )
 
-            set( CMAKE_EXE_LINKER_FLAGS_RELEASE "-s" )
+        set( CMAKE_EXE_LINKER_FLAGS_RELEASE "-s" )
 
-            # Defeat ELF's ability to use the GOT to replace locally implemented functions
-            # with ones from another module.
-            # https://bugs.launchpad.net/kicad/+bug/1322354
-            set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} ${TO_LINKER},-Bsymbolic" )
-            set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} ${TO_LINKER},-Bsymbolic" )
-        endif()
+        # Defeat ELF's ability to use the GOT to replace locally implemented functions
+        # with ones from another module.
+        # https://bugs.launchpad.net/kicad/+bug/1322354
+        set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,-Bsymbolic" )
+        set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,-Bsymbolic" )
 
     endif()
 
-    # quiet GCC while in boost
-    if( GCC_VERSION VERSION_GREATER 4.8 OR GCC_VERSION VERSION_EQUAL 4.8 OR CMAKE_CXX_COMPILER_ID MATCHES "Clang" )
-        set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-unused-local-typedefs" )
-    endif()
-    set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-strict-aliasing" )
-
     if( APPLE )
         set( CMAKE_LD_FLAGS "${CMAKE_LD_FLAGS} -headerpad_max_install_names") # needed by fixbundle
     endif()
@@ -415,7 +388,7 @@ endif()
 if( KICAD_USE_OCC )
     add_definitions( -DKICAD_USE_OCC )
     remove_definitions( -DKICAD_USE_OCE )
-    unset( KICAD_USE_OCE )
+    unset( KICAD_USE_OCE CACHE )
 endif()
 
 if( KICAD_USE_CUSTOM_PADS )
@@ -672,8 +645,9 @@ set( INC_AFTER
     ${CMAKE_BINARY_DIR}
     )
 
-
+#
 # Find Python and other scripting resources
+#
 if( KICAD_SCRIPTING OR KICAD_SCRIPTING_MODULES )
 
     # SWIG 3.0 or later require for C++11 support.
@@ -731,19 +705,36 @@ if( KICAD_SCRIPTING OR KICAD_SCRIPTING_MODULES )
         find_package( PythonLibs 2.6 REQUIRED )
     endif()
 
-    if( KICAD_SCRIPTING_WXPYTHON )
-        find_package( wxPython REQUIRED )
-        message( STATUS "Found ${WXPYTHON_FLAVOR} "
-            "${WXPYTHON_VERSION}/${WXPYTHON_TOOLKIT} "
-            "(wxWidgets ${WXPYTHON_WXVERSION})" )
-    endif()
-
     # Infrequently needed headers go at end of search paths, append to INC_AFTER which
     # although is used for all components, should be a harmless hit for something like eeschema
     # so long as unused search paths are at the end like this.
     set( INC_AFTER ${INC_AFTER} ${PYTHON_INCLUDE_DIRS} ${CMAKE_CURRENT_SOURCE_DIR}/scripting )
 endif()
 
+# Find the wxPython installation if requested
+if( KICAD_SCRIPTING_WXPYTHON )
+    find_package( wxPython REQUIRED )
+
+    if( KICAD_SCRIPTING_WXPYTHON_PHOENIX AND WXPYTHON_VERSION VERSION_LESS 4.0.0 )
+        message( FATAL_ERROR
+            "Unable to find wxPython Phoenix,"
+            " instead found wxPython Classic ${WXPYTHON_VERSION}" )
+    endif()
+
+    # The test VERSION_GREATER_EQUAL is only available in cmake >3.7, so use the max possible
+    # version for the 3.0 line as the basis of the comparison
+    if( NOT KICAD_SCRIPTING_WXPYTHON_PHOENIX AND WXPYTHON_VERSION VERSION_GREATER 3.9.999 )
+        message( FATAL_ERROR
+            "Unable to find wxPython Classic,"
+            " instead found wxPython Phoenix ${WXPYTHON_VERSION}" )
+    endif()
+
+    message( STATUS "Found ${WXPYTHON_FLAVOR} "
+        "${WXPYTHON_VERSION}/${WXPYTHON_TOOLKIT} "
+        "(wxWidgets ${WXPYTHON_WXVERSION})" )
+endif()
+
+
 #
 # Find wxWidgets library, required
 #
@@ -781,6 +772,10 @@ find_package( wxWidgets ${wxWidgets_REQ_VERSION} COMPONENTS gl aui adv html core
 # Include wxWidgets macros.
 include( ${wxWidgets_USE_FILE} )
 
+# Check for GTK3 libraries - These do not have XOR, so we need overlay (Page layout editor)
+if( wxWidgets_LIBRARIES MATCHES "gtk3" )
+    add_definitions( -DUSE_WX_OVERLAY )
+endif()
 
 if( KICAD_SCRIPTING_WXPYTHON AND NOT KICAD_SCRIPTING_WXPYTHON_PHOENIX )
     # wxPython appears to be installed and valid so make sure the headers are available.
@@ -874,6 +869,16 @@ add_custom_target( uninstall
     "${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" )
 
 
+#################################################
+# Generate platform metadata files
+#################################################
+if( APPLE )
+    include( ${CMAKE_MODULE_PATH}/WritePlatformMetadata_macos.cmake )
+elseif( UNIX )
+    include( ${CMAKE_MODULE_PATH}/WritePlatformMetadata_linux.cmake )
+endif()
+
+
 #================================================
 # Installation
 #================================================
@@ -899,7 +904,7 @@ if( UNIX AND NOT APPLE )
     set( UNIX_MIME_FILES ${UNIX_MIME_DIR}/mime )
     set( UNIX_ICON_FILES ${UNIX_MIME_DIR}/icons )
     set( UNIX_APPLICATIONS_FILES ${UNIX_MIME_DIR}/applications )
-    set( UNIX_APPDATA_FILES resources/linux/appdata )
+    set( UNIX_APPDATA_FILES ${PROJECT_BINARY_DIR}/resources/linux/appdata )
 
     # Install Mime directory
     install( DIRECTORY ${UNIX_ICON_FILES}
@@ -923,6 +928,9 @@ if( UNIX AND NOT APPLE )
     install( DIRECTORY ${UNIX_APPDATA_FILES}
         DESTINATION share
         COMPONENT resources
+        FILES_MATCHING
+        PATTERN "*appdata.xml"
+        PATTERN "*.in" EXCLUDE
         )
 endif()
 
@@ -968,7 +976,10 @@ add_subdirectory( plugins )             # 3D plugins must be built before kicad
 add_subdirectory( kicad )               # should follow pcbnew, eeschema
 add_subdirectory( tools )
 add_subdirectory( utils )
-add_subdirectory( qa )
+
+if( KICAD_BUILD_QA_TESTS )
+    add_subdirectory( qa )
+endif()
 
 # Resources
 if ( KICAD_INSTALL_DEMOS )

CMakeModules/CreateGitVersionHeader.cmake

@@ -27,6 +27,8 @@ macro( create_git_version_header _git_src_path )
     find_package( Git )
 
     if( GIT_FOUND )
+        message( STATUS "Using Git to determine build version string." )
+
         set( _Git_SAVED_LC_ALL "$ENV{LC_ALL}" )
         set( ENV{LC_ALL} C )
 

CMakeModules/FindPythonInterp.cmake

@@ -37,7 +37,7 @@ unset(_Python_NAMES)
 
 set(_PYTHON1_VERSIONS 1.6 1.5)
 set(_PYTHON2_VERSIONS 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0)
-set(_PYTHON3_VERSIONS 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0)
+set(_PYTHON3_VERSIONS 3.10 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0)
 
 if(PythonInterp_FIND_VERSION)
     if(PythonInterp_FIND_VERSION MATCHES "^[0-9]+\\.[0-9]+(\\.[0-9]+.*)?$")

CMakeModules/FindPythonLibs.cmake

@@ -44,7 +44,7 @@ cmake_find_frameworks(Python)
 
 set(_PYTHON1_VERSIONS 1.6 1.5)
 set(_PYTHON2_VERSIONS 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0)
-set(_PYTHON3_VERSIONS 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0)
+set(_PYTHON3_VERSIONS 3.10 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0)
 
 if(PythonLibs_FIND_VERSION)
     if(PythonLibs_FIND_VERSION MATCHES "^[0-9]+\\.[0-9]+(\\.[0-9]+.*)?$")

CMakeModules/FindSWIG.cmake

@@ -55,7 +55,7 @@
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-find_program(SWIG_EXECUTABLE NAMES swig3.0 swig2.0 swig)
+find_program(SWIG_EXECUTABLE NAMES swig4.0 swig3.0 swig2.0 swig)
 
 if(SWIG_EXECUTABLE)
   execute_process(COMMAND ${SWIG_EXECUTABLE} -swiglib

CMakeModules/Findngspice.cmake

@@ -1,6 +1,8 @@
 # CMake script for finding libngspice
 
 # Copyright (C) 2016 CERN
+# Copyright (C) 2020 Kicad Developers, see AUTHORS.txt for contributors.
+#
 # Author: Maciej Suminski <maciej.suminski@cern.ch>
 #
 # This program is free software; you can redistribute it and/or
@@ -20,20 +22,108 @@
 # or you may write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 
+# Usage:
+#
+# ngspice uses pkg-config to gather the configuration information so the pkg-config
+# information is used to populate the CMake find_* commands.  When pkg-config is not
+# available, the fallback is the default platform search paths set up by CMake.  The
+# default search paths can be overridden by user.  The order of precedence is as
+# follows:
+#
+# User defined root path NGSPICE_ROOT_DIR on CMake command line.
+# User defined root path environment variable NGSPICE_ROOT_DIR.
+# Paths generated by pkg-config.
+# The default system paths configured by CMake
+#
+# For a specific ngspice include path not defined above set NGSPICE_INCLUDE_PATH.
+#
+# For a specific ngspice library path not defined above set NGSPICE_LIBRARY_PATH.
+
+# Use pkg-config if it's available.
+find_package(PkgConfig)
+
+if( PKG_CONFIG_FOUND )
+    pkg_check_modules( _NGSPICE ngspice )
+
+    if( _NGSPICE_FOUND )
+        set( NGSPICE_BUILD_VERSION "${_NGSPICE_VERSION}" CACHE STRING
+             "ngspice version returned by pkg-config" )
+    endif()
+endif()
+
 find_path( NGSPICE_INCLUDE_DIR ngspice/sharedspice.h
-    PATHS ${NGSPICE_ROOT_DIR} $ENV{NGSPICE_ROOT_DIR} ${NGSPICE_INCLUDE_PATH}
-    PATH_SUFFIXES src/include share/ngspice/include share/ngspice/include/ngspice
+    PATHS
+        ${NGSPICE_ROOT_DIR}
+        $ENV{NGSPICE_ROOT_DIR}
+        ${NGSPICE_INCLUDE_PATH}
+        ${_NGSPICE_INCLUDE_DIRS}
+    PATH_SUFFIXES
+        include
+        src/include
+        share/ngspice/include
+        share/ngspice/include/ngspice
 )
 
-find_library( NGSPICE_LIBRARY ngspice
-    PATHS ${NGSPICE_ROOT_DIR} $ENV{NGSPICE_ROOT_DIR} ${NGSPICE_LIBRARY_PATH}
-    PATH_SUFFIXES src/.libs lib
+if( UNIX )
+    set( NGSPICE_LIB_NAME libngspice.so.0 CACHE STRING "Optionally versioned name of the shared library" )
+else()
+    set( NGSPICE_LIB_NAME ngspice CACHE STRING "Optionally versioned name of the shared library" )
+endif()
+
+find_library( NGSPICE_LIBRARY ${NGSPICE_LIB_NAME}
+    PATHS
+        ${NGSPICE_ROOT_DIR}
+        $ENV{NGSPICE_ROOT_DIR}
+        ${NGSPICE_LIBRARY_PATH}
+        ${_NGSPICE_LIBRARY_DIRS}
+    PATH_SUFFIXES
+        src/.libs
+        lib
 )
 
+# If the ngspice version is not set by pkg-config, see if ngspice/config.h is available.
+if( NOT NGSPICE_BUILD_VERSION )
+    find_file( NGSPICE_CONFIG_H ngspice/config.h
+        PATHS
+            ${NGSPICE_ROOT_DIR}
+            $ENV{NGSPICE_ROOT_DIR}
+            ${NGSPICE_INCLUDE_PATH}
+            ${_NGSPICE_INCLUDE_DIRS}
+        PATH_SUFFIXES
+            include
+            src/include
+            share/ngspice/include
+            share/ngspice/include/ngspice
+        )
+
+    if( NOT NGSPICE_CONFIG_H-NOTFOUND )
+        message( STATUS "ngspice configuration file ${NGSPICE_CONFIG_H} found." )
+        set( NGSPICE_HAVE_CONFIG_H "1" CACHE STRING "ngspice/config.h header found." )
+    endif()
+endif()
+
 if( WIN32 AND MSYS )
     # NGSPICE_LIBRARY points to libngspice.dll.a on Windows,
     # but the goal is to find out the DLL name.
     find_library( NGSPICE_DLL NAMES libngspice-0.dll libngspice-1.dll )
+
+    # Some msys versions do not find xxx.dll lib files, only xxx.dll.a files
+    # so try a find_file in exec paths
+    if( NGSPICE_DLL STREQUAL "NGSPICE_DLL-NOTFOUND" )
+        find_file( NGSPICE_DLL NAMES libngspice-0.dll libngspice-1.dll
+            PATHS
+                ${NGSPICE_ROOT_DIR}
+            PATH_SUFFIXES
+                bin
+                lib
+            )
+    endif()
+
+    if( NGSPICE_DLL STREQUAL "NGSPICE_DLL-NOTFOUND" )
+        message( ERROR ":\n***** libngspice-x.dll not found in any executable path *****\n\n" )
+    else()
+        message( STATUS ": libngspice shared lib found: ${NGSPICE_DLL}\n" )
+    endif()
 else()
     set( NGSPICE_DLL "${NGSPICE_LIBRARY}" )
 endif()
@@ -47,7 +137,7 @@ if( ${NGSPICE_INCLUDE_DIR} STREQUAL "NGSPICE_INCLUDE_DIR-NOTFOUND" OR ${NGSPICE_
     message( "Most of ngspice packages do not provide the required libngspice library." )
     message( "You can either compile ngspice configured with --with-ngshared parameter" )
     message( "or run a script that does the job for you:" )
-    message( "  cd ./scripts" )
+    message( "  cd ./scripting/build_tools" )
     message( "  chmod +x get_libngspice_so.sh" )
     message( "  ./get_libngspice_so.sh" )
     message( "  sudo ./get_libngspice_so.sh install" )
@@ -61,4 +151,6 @@ mark_as_advanced(
     NGSPICE_INCLUDE_DIR
     NGSPICE_LIBRARY
     NGSPICE_DLL
+    NGSPICE_BUILD_VERSION
+    NGSPICE_HAVE_CONFIG_H
 )

CMakeModules/Functions.cmake

@@ -25,9 +25,13 @@
 # Function make_lexer
 # is a standard way to invoke TokenList2DsnLexer.cmake.
 # Extra arguments are treated as source files which depend on the generated
-# outHeaderFile
+# files.  Some detail here on the indirection:
+#  - Parallel builds all depend on the same files, and CMake will generate the same file multiple times in the same location.
+# This can be problematic if the files are generated at the same time and overwrite each other.
+#  - To fix this, we create a custom target (outputTarget) that the parallel builds depend on.
+# AND build dependencies.  This creates the needed rebuild for appropriate source object changes.
+function( make_lexer outputTarget inputFile outHeaderFile outCppFile enum )
 
-function( make_lexer inputFile outHeaderFile outCppFile enum )
     add_custom_command(
         OUTPUT  ${outHeaderFile}
                 ${outCppFile}
@@ -37,14 +41,17 @@ function( make_lexer inputFile outHeaderFile outCppFile enum )
             -DoutHeaderFile=${outHeaderFile}
             -DoutCppFile=${outCppFile}
             -P ${CMAKE_MODULE_PATH}/TokenList2DsnLexer.cmake
-        DEPENDS ${inputFile}
-                ${CMAKE_MODULE_PATH}/TokenList2DsnLexer.cmake
         COMMENT "TokenList2DsnLexer.cmake creating:
            ${outHeaderFile} and
            ${outCppFile} from
            ${inputFile}"
         )
 
+    add_custom_target( ${outputTarget}
+        DEPENDS ${outHeaderFile} ${outCppFile}
+                ${CMAKE_MODULE_PATH}/TokenList2DsnLexer.cmake
+        )
+
     # extra_args, if any, are treated as source files (typically headers) which
     # are known to depend on the generated outHeader.
     foreach( extra_arg ${ARGN} )

CMakeModules/KiCadFullVersion.cmake

@@ -0,0 +1,40 @@
+#
+#  This program source code file is part of KICAD, a free EDA CAD application.
+#
+#  Copyright (C) 2019 Ian McInerney <Ian.S.McInerney@ieee.org>
+#  Copyright (C) 2019 KiCad Developers, see AUTHORS.txt for contributors.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License
+#  as published by the Free Software Foundation; either version 2
+#  of the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, you may find one here:
+#  http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+#  or you may search the http://www.gnu.org website for the version 2 license,
+#  or you may write to the Free Software Foundation, Inc.,
+#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+#
+
+# This file will create the full KiCad version string. The base of this string
+# will be either the git tag followed by the commit hash (if built inside a git
+# repository), or the version from KiCadVersion.cmake. The user-provided
+# KICAD_VERSION_EXTRA is then appended to the base version string.
+
+# Use git to determine the version string if it's available.
+include( ${CMAKE_MODULE_PATH}/CreateGitVersionHeader.cmake )
+create_git_version_header( ${SRC_PATH} )
+
+# $KICAD_VERSION is set in KiCadVersion.cmake or by git (if it is available).
+set( KICAD_VERSION_FULL "${KICAD_VERSION}" )
+
+# Optional user version information defined at configuration.
+if( KICAD_VERSION_EXTRA )
+    set( KICAD_VERSION_FULL "${KICAD_VERSION_FULL}-${KICAD_VERSION_EXTRA}" )
+endif()

CMakeModules/KiCadVersion.cmake

@@ -1,38 +1,38 @@
-#
-#  This program source code file is part of KICAD, a free EDA CAD application.
-#
+#
+#  This program source code file is part of KICAD, a free EDA CAD application.
+#
 #  Copyright (C) 2016 Wayne Stambaugh <stambaughw@gmail.com>
-#  Copyright (C) 2016 - 2018 KiCad Developers, see AUTHORS.txt for contributors.
-#
-#  This program is free software; you can redistribute it and/or
-#  modify it under the terms of the GNU General Public License
-#  as published by the Free Software Foundation; either version 2
-#  of the License, or (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, you may find one here:
-#  http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
-#  or you may search the http://www.gnu.org website for the version 2 license,
-#  or you may write to the Free Software Foundation, Inc.,
-#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
-#
-
-# Note: unless you are the person responsible for creating releases,
-#       do *not* change these variables.  This way the KiCad project
-#       can maintain control over what is an official KiCad build and
-#       what is not.  Setting these variable that conflict with KiCad
-#       releases is a shooting offense.
-#
-# This file gets included in the WriteVersionHeader.cmake file to set
+#  Copyright (C) 2016 - 2021 KiCad Developers, see AUTHORS.txt for contributors.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License
+#  as published by the Free Software Foundation; either version 2
+#  of the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, you may find one here:
+#  http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+#  or you may search the http://www.gnu.org website for the version 2 license,
+#  or you may write to the Free Software Foundation, Inc.,
+#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+#
+
+# Note: unless you are the person responsible for creating releases,
+#       do *not* change these variables.  This way the KiCad project
+#       can maintain control over what is an official KiCad build and
+#       what is not.  Setting these variable that conflict with KiCad
+#       releases is a shooting offense.
+#
+# This file gets included in the WriteVersionHeader.cmake file to set
 # the default KiCad version when the source is provided in an archive
 # file or git is not available on the build system.   When KiCad is
 # cloned using git, the git version is used.  This version string should
 # be set after each version tag is added to the git repo.  This will
 # give developers a reasonable idea where which branch was used to build
 # KiCad.
-set( KICAD_VERSION "5.1.0-rc1" )
+set( KICAD_VERSION "5.1.12-unknown" )

CMakeModules/WritePlatformMetadata_linux.cmake

@@ -0,0 +1,46 @@
+#
+#  This program source code file is part of KICAD, a free EDA CAD application.
+#
+#  Copyright (C) 2019 Ian McInerney <Ian.S.McInerney@ieee.org>
+#  Copyright (C) 2019 KiCad Developers, see AUTHORS.txt for contributors.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License
+#  as published by the Free Software Foundation; either version 2
+#  of the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, you may find one here:
+#  http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+#  or you may search the http://www.gnu.org website for the version 2 license,
+#  or you may write to the Free Software Foundation, Inc.,
+#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+#
+
+# This file will configure the linux appdata.xml file to include the version
+# and build date.
+
+message( STATUS "Creating linux metadata" )
+
+# Create the KiCad version strings
+set( SRC_PATH ${PROJECT_SOURCE_DIR} )
+include( ${CMAKE_MODULE_PATH}/KiCadVersion.cmake )
+include( ${CMAKE_MODULE_PATH}/KiCadFullVersion.cmake )
+
+# Create the date of the configure
+string( TIMESTAMP KICAD_CONFIG_TIMESTAMP "%Y-%m-%d" )
+
+# Configure the KiCad appdata file
+configure_file( ${PROJECT_SOURCE_DIR}/resources/linux/appdata/kicad.appdata.xml.in
+                ${PROJECT_BINARY_DIR}/resources/linux/appdata/kicad.appdata.xml
+                @ONLY )
+
+# Ensure the file was configured successfully
+if( NOT EXISTS ${PROJECT_BINARY_DIR}/resources/linux/appdata/kicad.appdata.xml )
+    message( FATAL_ERROR "Configuration failed to write file kicad.appdata.xml." )
+endif()

CMakeModules/WritePlatformMetadata_macos.cmake

@@ -0,0 +1,63 @@
+#
+#  This program source code file is part of KICAD, a free EDA CAD application.
+#
+#  Copyright (C) 2019 Ian McInerney <Ian.S.McInerney@ieee.org>
+#  Copyright (C) 2019 KiCad Developers, see AUTHORS.txt for contributors.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License
+#  as published by the Free Software Foundation; either version 2
+#  of the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, you may find one here:
+#  http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+#  or you may search the http://www.gnu.org website for the version 2 license,
+#  or you may write to the Free Software Foundation, Inc.,
+#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+#
+
+# This file will configure the MacOS info.plist files to include the version
+# and build date.
+
+message( STATUS "Creating MacOS metadata" )
+
+# Create the KiCad version strings
+set( SRC_PATH ${PROJECT_SOURCE_DIR} )
+include( ${CMAKE_MODULE_PATH}/KiCadVersion.cmake )
+include( ${CMAKE_MODULE_PATH}/KiCadFullVersion.cmake )
+
+
+# Configure each plist file from the respurces directory and store it in the build directory
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/bitmap2component.Info.plist.in
+                ${PROJECT_BINARY_DIR}/bitmap2component/Info.plist
+                @ONLY )
+
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/eeschema.Info.plist.in
+                ${PROJECT_BINARY_DIR}/eeschema/Info.plist
+                @ONLY )
+
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/gerbview.Info.plist.in
+                ${PROJECT_BINARY_DIR}/gerbview/Info.plist
+                @ONLY )
+
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/kicad.Info.plist.in
+                ${PROJECT_BINARY_DIR}/kicad/Info.plist
+                @ONLY )
+
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/pcb_calculator.Info.plist.in
+                ${PROJECT_BINARY_DIR}/pcb_calculator/Info.plist
+                @ONLY )
+
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/pcbnew.Info.plist.in
+                ${PROJECT_BINARY_DIR}/pcbnew/Info.plist
+                @ONLY )
+
+configure_file( ${PROJECT_SOURCE_DIR}/resources/macos/plist/pleditor.Info.plist.in
+                ${PROJECT_BINARY_DIR}/pagelayout_editor/Info.plist
+                @ONLY )

CMakeModules/WriteVersionHeader.cmake

@@ -22,25 +22,9 @@
 #  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 #
 
-# Automagically create version header file if the version string was
-# not defined during the build configuration.  If CreateGitVersionHeader
-# cannot determine the current repo version, a version.h file is still
-# created with KICAD_VERSION set in KiCadVersion.cmake.
+# Create the KiCad version strings
 include( ${CMAKE_MODULE_PATH}/KiCadVersion.cmake )
-
-# Always use git if it's available to determine the version string.
-message( STATUS "Using Git to determine build version string." )
-include( ${CMAKE_MODULE_PATH}/CreateGitVersionHeader.cmake )
-create_git_version_header( ${SRC_PATH} )
-
-# $KICAD_VERSION will always be set to something.  Even if it is the default
-# value set in KiCadVersion.cmake
-set( KICAD_VERSION_FULL "${KICAD_VERSION}" )
-
-# Optional user version information defined at configuration.
-if( KICAD_VERSION_EXTRA )
-    set( KICAD_VERSION_FULL "${KICAD_VERSION_FULL}-${KICAD_VERSION_EXTRA}" )
-endif()
+include( ${CMAKE_MODULE_PATH}/KiCadFullVersion.cmake )
 
 set( _wvh_new_version_text
 "/* Do not modify this file, it was automatically generated by CMake. */

CMakeModules/config.h.cmake

@@ -75,4 +75,10 @@
 /// Allows scripts install directory to be referenced by the program code.
 #define PYTHON_DEST                     "@PYTHON_DEST@"
 
+/// ngspice version string detected by pkg-config when available.
+#cmakedefine NGSPICE_BUILD_VERSION           "@NGSPICE_BUILD_VERSION@"
+
+/// When pkg-config config is not available for ngspice, use ngspice/config.h for version.
+#cmakedefine NGSPICE_HAVE_CONFIG_H
+
 #endif  // CONFIG_H_

Documentation/development/coding-style-policy.md

@@ -70,20 +70,43 @@ Set the `git clang-format` tool to use the provided `_clang-format` file:
 
     git config clangFormat.style file
 
-Then, to enable the format checker, set the `KICAD_CHECK_FORMAT` environment
-variable in your shell. Without this variable, the format checker will not
-run on commit, but you can still use `git clang-format --diff` to check manually.
+Then, to enable the format checker, set the `kicad.check-format` Git config
+to "true" for the KiCad repo:
 
-If enabled, when you commit a change, you will be told if you have caused any
-style violations (only in your changed code). You can fix them automatically
-with:
+    git config kicad.check-format true
 
-    git clang-format
+Without this config, the format checker will not run on commit, but you can
+still check files staged for commit manually (see below).
 
-Or you can proceed anyway, if you are sure your style is correct:
+If the hook is enabled, when you commit a change, you will be told if you
+have caused any style violations (only in your changed code). You can then fix
+the errors, either manually, or with the tools below.
+
+If you are warned about formatting errors, but you are sure your style is correct,
+you can still commit:
 
     git commit --no-verify
 
+### Correcting Formatting Errors ## {#correcting-formatting-errors}
+
+There is a Git aliases file that provides the right commands to show and correct
+formatting errors. Add to your repository config by running this command from
+the source directory:
+
+    git config --add include.path $(pwd)/helpers/git/format_alias
+
+Then you can use the following aliases:
+
+* `git check-format`: show any formatting warnings (but make no changes)
+* `git fix-format`: correct formatting (you will need to `git add` afterwards)
+
+These aliases use a script, `tools/check-coding.sh`, which takes care of only
+checking the formatting for files that should be formatted. This script has
+other uses:
+
+* Make (or see only) violations in files modified in the previous commit (useful
+when interactive-rebasing):
+    * `check_coding.sh --amend [--diff]`
 
 # 2. Naming Conventions # {#naming_conventions}
 Before delving into anything as esoteric as indentation and formatting,
@@ -456,6 +479,20 @@ The case statement is to be indented to the same level as the switch.
     }
 ~~~~~~~~~~~~~
 
+It is permitted to place all cases on a single line each, if that makes the
+code more readable. This is often done for look-ups or translation functions. In
+this case, you will have to manually align for readability as appropriate and
+reject clang-format's suggested changes, if you use it:
+
+~~~~~~~~~~~~~{.cpp}
+    switch( m_orientation )
+    {
+    case PIN_RIGHT: m_orientation = PIN_UP;    break;
+    case PIN_UP:    m_orientation = PIN_LEFT;  break;
+    case PIN_LEFT:  m_orientation = PIN_DOWN;  break;
+    case PIN_DOWN:  m_orientation = PIN_RIGHT; break;
+    }
+~~~~~~~~~~~~~
 
 # 5. License Statement # {#license_statement}
 There is a the file copyright.h which you can copy into the top of
@@ -824,6 +861,6 @@ learn something new.
 
 [clang-format]: https://clang.llvm.org/docs/ClangFormat.html
 [cppstandard]:http://www.possibility.com/Cpp/CppCodingStandard.html
-[kernel]:http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/tree/Documentation/CodingStyle
+[kernel]:https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/Documentation/process/coding-style.rst
 [overloading]:http://www.cs.caltech.edu/courses/cs11/material/cpp/donnie/cpp-ops.html
 [style]:http://en.wikipedia.org/wiki/Programming_style

Documentation/development/compiling.md

@@ -149,27 +149,40 @@ on macOS.  This is enabled on macOS by default and disabled on all other platfor
 ## Scripting Support ## {#scripting_opt}
 
 The KICAD_SCRIPTING option is used to enable building the Python scripting support into Pcbnew.
-This options is enabled by default.
+This options is enabled by default, and will disable all other KICAD_SCRIPTING_* options when
+it is disabled.
+
+## Python 3 Scripting Support ## {#python3}
+
+The KICAD_SCRIPTING_PYTHON3 option is used to enable using Python 3 for the scripting support
+instead of Python 2.  This option is disabled by default and only is relevant if
+[KICAD_SCRIPTING](#scripting_opt) is enabled.
 
 ## Scripting Module Support ## {#scripting_mod_opt}
 
 The KICAD_SCRIPTING_MODULES option is used to enable building and installing the Python modules
-supplied by KiCad.  This option is enabled by default.
-
-## Python 3 Scripting Support ## {#python3}
-
-The KICAD_SCRIPTING_PYTHON3 option is used to enable building of the Python 3 interface instead
-of Python 2.  This option is disabled by default.
+supplied by KiCad.  This option is enabled by default, but will be disabled if
+[KICAD_SCRIPTING](#scripting_opt) is disabled.
 
 ## wxPython Scripting Support ## {#wxpython_opt}
 
 The KICAD_SCRIPTING_WXPYTHON option is used to enable building the wxPython interface into
-Pcbnew including the wxPython console.  This option is enabled by default.
+Pcbnew including the wxPython console.  This option is enabled by default, but will be disabled if
+[KICAD_SCRIPTING](#scripting_opt) is disabled.
 
 ## wxPython Phoenix Scripting Support ## {#wxpython_phoenix}
 
 The KICAD_SCRIPTING_WXPYTHON_PHOENIX option is used to enable building the wxPython interface with
-the new Phoenix binding instead of the legacy one.  This option is disabled by default.
+the new Phoenix binding instead of the legacy one.  This option is disabled by default, and
+enabling it requires [KICAD_SCRIPTING](#scripting_opt) to be enabled.
+
+## Python Scripting Action Menu Support ## {#python_action_menu_opt}
+
+The KICAD_SCRIPTING_ACTION_MENU option allows Python scripts to be added directly to the Pcbnew
+menu.  This option is enabled by default, but will be disabled if
+[KICAD_SCRIPTING](#scripting_opt) is disabled.  Please note that this option is highly
+experimental and can cause Pcbnew to crash if Python scripts create an invalid object state
+within Pcbnew.
 
 ## GitHub Plugin ## {#github_opt}
 
@@ -209,7 +222,7 @@ and can cause Pcbnew to crash if Python scripts create an invalid object state w
 
 The KiCad version string is defined by the output of `git describe --dirty` when git is available
 or the version string defined in CMakeModules/KiCadVersion.cmake with the value of
-KICAD_VERSION_EXTRA appended to the former.  If the KICAD_VERSION_EXTRA variable is not define,
+KICAD_VERSION_EXTRA appended to the former.  If the KICAD_VERSION_EXTRA variable is not defined,
 it is not appended to the version string.  If the KICAD_VERSION_EXTRA  variable is defined it
 is appended along with a leading '-' to the full version string as follows:
 
@@ -336,6 +349,12 @@ configure pacman to prevent upgrading the 64-bit Boost package by adding:
 
 to your /etc/pacman.conf file.
 
+### Building with Boost 1.70 ### {#ki_msys2_boost_1_70}
+
+There is an issue building KiCad with Boost version 1.70 due to CMake not defining the proper
+link libraries during configuration.  Boost 1.70 can be used but `-DBoost_NO_BOOST_CMAKE=ON`
+needs to be added during CMake configuration to insure the link libraries are properly generated.
+
 ### Building OCE from source
 
 KiCad requires OCE by default, and the version installed by `pacman` can cause build errors in
@@ -452,8 +471,8 @@ to download and [build Boost][] from source.  If you are building Boost on windo
 you will have to apply the Boost patches in the KiCad source [patches folder][].
 
 
-[download]: http://kicad-pcb.org/download/
-[KiCad website]: http://kicad-pcb.org/
+[download]: http://kicad.org/download/
+[KiCad website]: http://kicad.org/
 [KiCad Launchpad]: https://launchpad.net/kicad
 [GNU GCC]: https://gcc.gnu.org/
 [Clang]: http://clang.llvm.org/

Documentation/development/pcbnew-plugins.md

@@ -19,11 +19,11 @@ interpreter installed on the system.
 The Pcbnew Python API can be used stand-alone, i.e. no instance of Pcbnew is
 running and the board project to be manipulated is loaded and saved from and to
 file.  This approach is shown with some examples in the [user's
-documentation](http://docs.kicad-pcb.org/stable/en/pcbnew.html#_kicad_scripting_reference).
+documentation](http://docs.kicad.org/stable/en/pcbnew.html#_kicad_scripting_reference).
 
 Another documentation source is the auto-generated Doxygen reference of the
 API. It can be found
-[here](http://docs.kicad-pcb.org/doxygen-python/namespacepcbnew.html).
+[here](http://docs.kicad.org/doxygen-python/namespacepcbnew.html).
 
 # `Action Plugin` Support # {#ppi_action_pi}
 Besides the stand-alone usage of the generated Python plugin interface,

Documentation/development/road-map-r5.md

@@ -1,461 +0,0 @@
-# Version 5 Road Map # {#v5_road_map}
-
-This document is the KiCad version 5 Developer's road map document.  It is
-living document that should be maintained during the version 5 development
-cycle.  The goal of this document is to provide an overview for developers
-of the goals for the project for the version 5 release of KiCad.  It is
-broken into sections for each major component of the KiCad source code and
-documentation.  It defines tasks that developers an use to contribute to the
-project and provides updated status information.  Tasks should define clear
-objectives and avoid vague generalizations so that a new developer can complete
-the task.  It is not a place for developers to add their own personal wish.
-list.  It should only be updated with approval of the project manager after
-discussion with the lead developers.
-
-Each entry in the road map is made up of four sections.  The goal should
-be a brief description of the what the road map entry will accomplish.  The
-task section should be a list of deliverable items that are specific enough
-hat they can be documented as completed.  The dependencies sections is a list
-of requirements that must be completed before work can begin on any of the
-tasks.  The status section should include a list of completed tasks or marked
-as complete as when the goal is met.
-
-[TOC]
-
-# Project # {#v5_project}
-This section defines the tasks for the project related goals that are not
-related to coding or documentation.  It is a catch all for issues such as
-developer and user relations, dissemination of information on websites,
-policies, etc.
-
-
-# General # {#v5_general}
-This section defines the tasks that affect all or most of KiCad or do not
-fit under as specific part of the code such as the board editor or the
-schematic editor.
-
-## Search Tree Control ## {#v5_re_search_control}
-
-**Goal:**
-Create a user interface element that allows searching through a list of
-items in a tree control for library searching.
-
-**Task:**
-- Create hybrid tree control with search text control for displaying filtered
-  objects (both symbol and footprint libraries) in a parent window.
-
-**Dependencies:**
-- None
-
-**Status:**
-- Initial container searching code completed.
-- Wildcard and regular expression container searching completed.
-- Control code in progress.
-
-# Common Library # {#v5_common_lib}
-This section covers the source code shared between all of the KiCad
-applications
-
-## Unified Rendering Framework ## {#v5_unified_rendering}
-**Goal:**
-
-Provide a single framework for developing new tools.  Port existing tools
-to the new framework and remove the legacy framework tools.
-
-**Task:**
-- Port wxDC to GAL or get Cairo rendering to nearly the performance of the
-  current wxDC rendering so that we have a single framework to develop new
-  tools and we can continue to support systems that don't have a complete
-  OpenGL stack.
-
-**Dependencies**
-- [Tool framework](http://www.ohwr.org/projects/cern-kicad/wiki/WorkPackages)
-
-**Status**
-- In progress
-
-## Printing Improvements ## {#v5_print}
-**Goal:**
-
-Make printing quality consistent across platforms.
-
-**Task:**
-- Resolve printing issues on all platforms.
-
-**Dependencies**
-- None
-
-**Status**
-- No progress.
-
-## Object Properties and Introspection ## {#v5_object_props}
-**Goal:**
-
-Provide an object introspection system using properties.
-
-**Task:**
-- Select existing or develop property system.
-- Add definable properties to base objects.
-- Create introspection framework for manipulating object properties.
-- Serialization of properties to and from files and/or other I/O structures.
-- Create tool to edit property namespace/object name/name/type/value table.
-
-**Dependencies:**
-- None
-
-**Status:**
-- No progress.
-
-## 3D Viewer Dynamic Library Plugin ## {#v5_plugin_base}
-**Goal:**
-
-Create a base library plugin for handling external file I/O for the 3D viewer.
-This will allow plugins to be provided that are external to the project such
-as providing solid model file support (STEP, IGES, etc.) using OpenCascade
-without making it a project dependency.
-
-**Task:**
-- Create a plugin to handle dynamically registered plugins for loading and
-  saving file formats.
-- This object should be flexible enough to be extended for handling all file
-  plugin types including schematic, board, footprint library, component
-  library, etc. (optional)
-- See [blueprint](https://blueprints.launchpad.net/kicad/+spec/pluggable-file-io)
-  on Launchpad for more information.
-
-**Dependencies:**
-- None
-
-**Status:**
-- 3D plugin code complete and legacy formats implemented.
-
-
-# Eeschema: Schematic Editor # {#v5_eeschema}
-This section applies to the source code for the Eeschema schematic editor.
-
-## Coherent SCHEMATIC Object ## {#v5_sch_object}
-**Goal:**
-
-Clean up the code related to the schematic object(s) into a coherent object for
-managing and manipulating the schematic that can be used by third party tools
-and Python scripting.
-
-**Task:**
-- Move handling of root sheet object to SCHEMATIC object.
-- Move SCH_SCREENS code into SCH_OBJECT.
-- Build and maintain schematic hierarchy in SCHEMATIC object rather than
-  recreating on the fly every time the hierarchical information is required.
-- Optionally build and maintain netlist during editing for extended editing
-  features.
-- Add any missing functionality to the SCHEMATIC object.
-
-**Dependencies:**
-- [Schematic and Component Library Plugin](#v5_sch_plugin)
-
-**Status:**
-- In progress.
-
-## Schematic and Component Library I/O Manager Plugin ## {#v5_sch_plugin}
-**Goal:**
-Create a plugin manager for loading and saving schematics and component
-libraries similar to the board plugin manager.
-
-**Task:**
-- Design plugin manager for schematics and component libraries.
-- Port the current schematic and component library file formats to use the
-  plugin.
-
-**Dependencies:**
-- None
-
-**Status:**
-- I/O manager and plugin objects are complete.
-- Legacy schematic file parser almost ready to commit.
-
-
-## S-Expression File Format ## {#v5_sch_sexpr}
-**Goal:**
-
-Make schematic file format more readable, add new features, and take advantage
-of the s-expression parser and formatter capability used in Pcbnew.
-
-**Task:**
-- Finalize feature set and file format.
-- Discuss the possibility of dropping the unit-less proposal temporarily to get
-  the s-expression file format and SWEET library format implemented without
-  completely rewriting Eeschema.
-- Add new s-expression file format to plugin.
-
-**Dependencies:**
-- [Schematic and component I/O manager plugin](#v5_sch_plugin)
-
-**Status:**
-- File format document nearly complete.
-
-## Implement Sweet Component Libraries ## {#v5_sch_sweet}
-**Goal:**
-
-Make component library design more robust and feature rich.  Use s-expressions
-to make component library files more readable.
-
-**Task:**
-- Use sweet component file format for component libraries.
-
-**Dependencies:**
-- [S-expression file format](#v5_sch_sexpr).
-  [Schematic and component I/O manager plugin](#v5_sch_plugin)
-
-**Status:**
-- Initial SWEET library file format document  written.
-
-## Component Library Editor Usability Improvements ## {#v5_lib_editor_usability}
-**Goal:**
-
-Make editing schematic symbol libraries easier to manage.
-
-**Task:**
-- Determine usability improvements in the library editor for components with
-  multiple units and/or alternate graphical representations.
-- Replace current library/symbols selection process with new hybrid tree search
-  widget in new window pain for selection libraries and symbols.  Provide drag
-  and drop symbol copy/move between libraries.
-- Allow editing of symbol libraries not defined in footprint library table(s)
-  using the file/path dialog to open a library.
-
-**Dependencies:**
-- [Search Tree Control](#v5_re_search_control)
-
-**Status:**
-- Determined alternate UI designs using new hybrid search tree control.
-
-## Component and Netlist Attributes ## {#v5_netlist_attributes}
-**Goal:**
-
-Provide a method of passing information to other tools via the net list.
-
-**Task:**
-- Add virtual components and attributes to netlist to define properties that
-  can be used by other tools besides the board editor.
-- Attributes (properties) are automatically included as part of the new file
-  format.
-
-**Dependencies:**
-- [S-expression schematic file format](#v5_sch_sexpr).
-
-**Status:**
-- No progress.
-
-
-# Circuit Simulation # {#simulation}
-**Goal:**
-
-Provide quality circuit simulation capabilities similar to commercial products.
-
-**Task:**
-- Evaluate and select simulation library (ngspice, gnucap, qucs, etc).
-- Evaluate and select plotting library with wxWidgets support.
-- Confirm current spice netlist export is up to the task and add missing
-  support for simulations.
-- Use plotting library to handle simulator output in a consistent manor similar
-  to LTSpice.
-- Develop a tool that allows fine tuning of components on the fly.
-- Use plugin for the simulation code to allow support of different simulation
-  libraries.
-- Create dialogs for configuring of simulation of Spice primitive components
-  such as voltage sources, current sources, etc.
-- Create dialog(s) for configuration of simulation types transient, DC operating
-  point, AC analysis, etc.
-
-**Dependencies:**
-- None
-
-**Status:**
-- Complete ([announcement message](https://lists.launchpad.net/kicad-developers/msg25483.html))
-
-
-# Pcbnew: Circuit Board Editor # {#v5_pcbnew}
-This section covers the source code of the board editing application Pcbnew.
-
-## Tool Framework ## {#v5_pcb_tool_framework}
-**Goal:**
-
-Unify all board editing tools under a single framework.
-
-**Task:**
-- Drop footprint edit mode.
-- Port auto-router to GAL.
-- Complete porting of all board editing tools to new tool framework so they
-  are available in the OpenGL and Cairo canvases.
-- Remove all duplicate legacy editing tools.
-
-**Dependencies:**
-- In progress.
-
-**Status:**
-- Initial porting work in progress.
-
-## Modeling ## {#v5_modeling}
-
-**Goal:**
-
-Provide improved solid modeling support for KiCad including the file formats
-available in OpenCascade.
-
-**Task:**
-- Improve low level code design.
-- Design plugin architecture to handle loading and saving 3D models.
-- Back port existing 3D formats (IDF and S3D) to plugin
-
-**Dependencies:**
-- [Dynamic library plugin](#v5_plugin_base).
-
-**Status:**
-- Completed.
-
-## Push and Shove Router Improvements ## {#v5_ps_router_improvements}
-
-**Goal:**
-
-Add finishing touches to push and shove router.
-
-**Task:**
-- Determine which features are feasible.
-- Factor out KiCad-specific code from PNS_ROUTER class.
-- Delete and backspace in idle mode
-- Differential pair clearance fixes.
-- Differential pair optimizer improvements (recognize differential pairs)
-- Persistent differential pair gap/width setting.
-- Walk around in drag mode.
-- Optimize trace being dragged too. (currently no optimization)
-- Backspace to erase last routed segment.
-- Auto-finish traces (if time permits)
-- Additional optimization pass for spring back algorithm using area-minimization
-  strategy. (improves tightness of routing)
-- Restrict optimization area to view port (if user wants to)
-- Support 45 degree tuning meanders.
-- Respect trace/via locking!
-- Keep out zone support.
-
-**Dependencies:**
-- None
-
-**Status:**
-- Feature feasibility determined.
-- In Progress.
-
-## Selection Filtering ## {#v5_pcb_selection_filtering}
-**Goal:**
-
-Make the selection tool easier for the user to determine which object(s) are
-being selected by filtering.
-
-**Task:**
-- Provide filtered object selection by adding a third tab to the layer manager
-  or possibly some other UI element to provide filtered selection options.
-
-**Dependencies:**
-- None
-
-**Status:**
-- Initial design concept discussed.
-
-## Segment End Point Snapping. ## {#v5_segment_snapping}
-**Goal:**
-
-It is not uncommon for board edge segment end points to inadvertently not
-be closed causing issues for the 3D viewer and exporting to different file
-formats due the board outline not being a fully enclosed polygon.  This
-feature would add segment end snapping support to allow the board outline
-to be fully enclosed.  This feature would only need to be supported by the
-GAL rendering.
-
-**Tasks**
-- Mark board edge segment ends with a drag indicator to make it visible to the
-  user that the segment end does not have an endpoint with any other board edge
-  segment.
-- Allow the user to snap the unconnected segment end to the nearest segment end
-  point.
-- Automatically connect unconnected segments with and additional segment when
-  opening the 3D viewer or exporting the board to another format.  Warn the
-  user that an addition segment has be added and should be verified.
-
-**Dependencies:**
-- None
-
-**Progress:**
-- Initial discussion.
-
-## Stitching Via Support ## {#v5_pcb_stitching_vias}
-**Goal:**
-
-Add capability to add vias for stitching and thermal transfer purposes
-that do not require being attached to tracks.
-
-**Task:**
-- Develop more robust connectivity checking algorithm.
-- Create a UI element to allow the user to select a net from the list of
-  valid nets.
-- Connection propagation fix for the current issue of vias that are not
-  connected to tracks being tagged as unassigned and removed.
-- Manual via placement tool.
-- Improve the DRC to handle cases of orphaned vias.
-
-**Dependencies:**
-- None
-
-**Progress:**
-- Patch available to fix via propagation issue.
-
-
-# Documentation # {#v5_documentation}
-This section defines the tasks for both the user and developer documentation.
-
-## Grammar Check ## {#v5_doc_grammar}
-**Goal:**
-
-Improve user documentation readability and make life easier to for translators.
-
-**Task:**
-- Review and revise all of the English documentation so that it is update with
-  the current functionality of the code.
-- Translate the update documentation into other languages.
-
-**Dependencies:**
-- None
-
-**Status:**
-- No progress.
-
-## Maintenance ## {#v5_doc_maintenance}
-**Task:**
-- Keep screen shots current with the source changes.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
-## Convert Developer Documentation to Markup/down Format ## {#v5_dev_doc_format}
-**Goal:**
-
-Improve developers documentation to make life easier for new developers to get
-involved with the project.
-
-**Task:**
-- Convert platform build instructions from plain text to new format to be
-  merged with the developer documentation.
-- Convert how to contribute to KiCad instructions from plain text to the new
-  format to merged with the developer documentation.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- In progress.  Most of the developer documentation has been converted to
-  [Doxygen markdown](http://www.doxygen.nl/manual/markdown.html)
-  and the [output][kicad-docs] is rebuilt automatically when a commit is
-  made to the KiCad repo.
-
-[kicad-website]:http://kicad-pcb.org/
-[kicad-docs]:http://ci.kicad-pcb.org/job/kicad-doxygen/ws/Documentation/doxygen/html/index.html

Documentation/development/road-map-r6.md

@@ -54,10 +54,84 @@ Create perspectives to allow users to arrange dockable windows as they prefer.
 **Status:**
 - No progress.
 
+## Object Properties and Introspection ## {#v6_object_props}
+**Goal:**
+
+Provide an object introspection system using properties.
+
+**Task:**
+- Select existing or develop property system.
+- Add definable properties to base objects.
+- Create introspection framework for manipulating object properties.
+- Serialization of properties to and from files and/or other I/O structures.
+- Create tool to edit property namespace/object name/name/type/value table.
+
+**Dependencies:**
+- None
+
+**Status:**
+- In progress.
+
 
 # Eeschema: Schematic Editor # {#v6_eeschema}
 This section applies to the source code for the Eeschema schematic editor.
 
+## Coherent SCHEMATIC Object ## {#v6_sch_object}
+**Goal:**
+
+Clean up the code related to the schematic object(s) into a coherent object for
+managing and manipulating the schematic that can be used by third party tools
+and Python scripting.
+
+**Task:**
+- Move handling of root sheet object to SCHEMATIC object.
+- Move SCH_SCREENS code into SCH_OBJECT.
+- Build and maintain schematic hierarchy in SCHEMATIC object rather than
+  recreating on the fly every time the hierarchical information is required.
+- Optionally build and maintain netlist during editing for extended editing
+  features.
+- Add any missing functionality to the SCHEMATIC object.
+
+**Dependencies:**
+- None
+
+**Status:**
+- In progress.
+
+## Implement Sweet (S-Expression) Symbol Libraries ## {#v6_sch_sweet}
+**Goal:**
+
+Make symbol library design more robust and feature rich.  Use s-expressions
+to make component library files more readable.
+
+**Task:**
+- Use sweet component file format for component libraries.
+
+**Dependencies:**
+- None
+
+**Status:**
+- Initial SWEET library file format document  written.
+
+## S-Expression File Format ## {#v6_sch_sexpr}
+**Goal:**
+
+Make schematic file format more readable, add new features, and take advantage
+of the s-expression parser and formatter capability used in Pcbnew.
+
+**Task:**
+- Finalize feature set and file format.
+- Discuss the possibility of dropping the unit-less proposal temporarily to get
+  the s-expression file format and SWEET library format implemented without
+  completely rewriting Eeschema.
+- Add new s-expression file format to plugin.
+
+**Dependencies:**
+- [S-expression file format](#v6_sch_sweet).
+
+**Status:**
+- File format document initial draft complete.
+
 ## Move Common Schematic Code into a Shared Object ## {#v6_sch_shared_object}
 **Goal:**
 
@@ -93,37 +167,22 @@ Improve the coverage and usability of the electrical rules checker (ERC).
 **Status:**
 - No progress.
 
-## Implement GAL and New Tool Framework ## {#v6_sch_gal}
-**Goal:**
-
-Implement the GAL and the tool framework used by Pcbnew in Eechema to
-provide advanced graphics and tool capabilities.
-
-**Task:**
-- Implement graphics abstraction layer along side current legacy rendering
-  framework.
-
-**Dependencies:**
-- None
-
-**Status:**
-- Initial Discussion..
-
-## Port Editing Tools ## {#v6_sch_tool_framework}
+## Port Editing Tools to New Tool Framework ## {#v6_sch_tool_framework}
 **Goal:**
 
 Convert all editing tool to new tool framework.
 
--**Task:**
+**Task:**
 - Rewrite existing editing tools using the new tool framework.
 - Add new capabilities supported by the new tool framework to existing
   editing tools.
+- Remove legacy tool framework.
 
--**Dependencies:**
-- [GAL and new tool framework port](#v6_sch_gal).
+**Dependencies:**
+- None.
 
--**Status:**
-- Initial Discussion..
+**Status:**
+- Schematic editor complete.
 
 ## Net Highlighting ## {#v6_sch_net_highlight}
 **Goal:**
@@ -134,28 +193,11 @@ Highlight wires, buses, and junctions when corresponding net in Pcbnew is select
 - Implement highlight algorithm for net objects.
 - Highlight objects connected to net selected in Pcbnew.
 
-**Dependencies:**
-- [GAL and new tool framework port, maybe](#v6_sch_gal).
-
-**Status:**
-- No progress.
-
-## Component Library Editor Improvements ## {#lib_editor_usability}
-**Goal:**
-
-Make editing components with multiple units and/or alternate graphical
-representations easier.
-
-**Task:**
-- Determine usability improvements in the library editor for components with
-  multiple units and/or alternate graphical representations.
-- Implement said usability improvements.
-
 **Dependencies:**
 - None.
 
 **Status:**
-- No progress.
+- Complete.
 
 ## Allow Use of System Fonts ## {#v6_sch_sys_fonts}
 **Goal:**
@@ -170,33 +212,112 @@ for schematic text.
 - Add support for selecting text object fonts.
 
 **Dependencies:**
-- [S-expression schematic file format](#sch_sexpr).
+- [S-expression schematic file format](#v6_sch_sexpr).
 
 **Status:**
 - No progress.
 
+## Symbol and Netlist Attributes ## {#v6_netlist_attributes}
+**Goal:**
+
+Provide a method of passing information to other tools via the net list.
+
+**Task:**
+- Add virtual components and attributes to netlist to define properties that
+  can be used by other tools besides the board editor.
+- Attributes (properties) are automatically included as part of the new file
+  format.
+
+**Dependencies:**
+- [S-expression schematic file format](#v6_sch_sexpr).
+
+**Status:**
+- No progress.
+
+## Orthogonal Wire Drag ## {#v6_orthogonal_drag}
+**Goal:**
+
+Keep wires and buses orthogonal when dragging a symbol.
+
+**Task:**
+- Add code to new tool framework to allow for orthogonal dragging of symbols.
+
+**Dependencies:**
+- [New tool framework](#v6_sch_tool_framework).
+
+**Status:**
+- No progress.
+
+## Custom Wire and Bus Attributes ## {#v6_sch_bus_wire_attr}
+**Goal:**
+
+Allow for wires and buses to have different widths, colors, and line types.
+
+**Task:**
+- Add code to support custom wire and bus attributes.
+- Add user interface element to support changing wire and bus attributes.
+
+**Dependencies:**
+- [S-Expression File Format](#v6_sch_sexpr).
+
+**Status:**
+- No progress.
+
+## Connectivity Improvements ## {#v6_sch_connectivity}
+**Goal:**
+
+Support structured buses, real time netlist calculations, and other
+connectivity improvements.
+
+**Task:**
+- Keep netlist up to date real time.
+- Add support for structured bus definitions.
+- Possible real time ERC checking.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Real time netlist and structured bus support complete.
+
+## ERC Improvements ## {#v6_sch_erc}
+**Goal:**
+
+Improve ERC test coverage and other ERC usability features.
+
+**Task:**
+- Add missing ERC tests to improve coverage.
+- Save ERC settings in project file.
+- Add mechanism to allow import and export of ERC settings.
+- ERC user interface improvements.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Preliminary specification draft complete.
+
+## Python Support ## {#v6_sch_python}
+**Goal:**
+
+SWIG all schematic low level objects and coherent schematic object to
+provide Python interface for manipulating schematic objects.
+
+**Task:**-
+- Create SWIG wrappers for all low level schematic, symbol library, and
+coherent schematic object code.
+- Add Python interpreter launcher.
+
+**Dependencies:**
+- [Coherent Schematic Object](#v6_sch_object).
+
+**Status:**
+- No Progress.
+
 
 # CvPcb: Footprint Association Tool # {#v6_cvpcb}
 This section covers the source code of the footprint assignment tool CvPcb.
 
-## Improved Footprint Search Tool ## {#v6_cvpcb_search}
-
-**Goal:**
-
-Provide advanced search features such as wild card and regular expression
-searches using the type as you go feature of the current search dialog.
-
-**Task:**
-- Add code for wild card and regular expression pattern matching to search
-  container objects.
-- Add search dialog to CvPcb to search container of footprint names.
-
-**Dependencies:**
-- [Search Tree Control](#v6_re_search_control)
-
-**Status:**
-- Pattern matching added to search container objects.
-
 
 # Pcbnew: Circuit Board Editor # {#v6_pcbnew}
 This section covers the source code of the board editing application Pcbnew.
@@ -208,14 +329,45 @@ This section covers the source code of the board editing application Pcbnew.
 Add finishing touches to push and shove router.
 
 **Task:**
-- Microwave tools to be added as parametrized shapes generated by Python
+- Delete and backspace in idle mode
+- Differential pair clearance fixes.
+- Differential pair optimizer improvements (recognize differential pairs)
+- Persistent differential pair gap/width setting.
+- Walk around in drag mode.
+- Optimize trace being dragged too. (currently no optimization)
+- Auto-finish traces (if time permits)
+- Additional optimization pass for spring back algorithm using area-minimization
+  strategy. (improves tightness of routing)
+- Restrict optimization area to view port (if user wants to)
+- Support 45 degree tuning meanders.
+- Respect trace/via locking!
+- Keep out zone support.
+- Microwave tools to be added as parameterized shapes generated by Python
   scripts.
+- BGA fan out support.
+- Drag footprints with traces connected.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- In progress.
+
+## Selection Filtering ## {#v6_pcb_selection_filtering}
+**Goal:**
+
+Make the selection tool easier for the user to determine which object(s) are
+being selected by filtering.
+
+**Task:**
+- Provide filtered object selection by adding a third tab to the layer manager
+  or possibly some other UI element to provide filtered selection options.
 
 **Dependencies:**
 - None
 
 **Status:**
-- None
+- In progress.
 
 ## Design Rule Check (DRC) Improvements. ## {#v6_drc_improvements}
 **Goal:**
@@ -223,7 +375,6 @@ Add finishing touches to push and shove router.
 Create additional DRC tests for improved error checking.
 
 **Task:**
-- Replace geometry code with [unified geometry library](#v6_geometry_lib).
 - Remove floating point code from clearance calculations to prevent rounding
   errors.
 - Add checks for component, silk screen, and mask clearances.
@@ -232,7 +383,7 @@ Create additional DRC tests for improved error checking.
 - Add option for saving and loading DRC options.
 
 **Dependencies:**
-- [Unified geometry library.](#v6_geometry_lib)
+- [Constraint Management System](#v6_pcb_constraint).
 
 **Progress:**
 - In progress.
@@ -273,7 +424,7 @@ does not have to do it in Eeschema and re-import the net list.
 - Add support to handle net label back annotation changes.
 
 **Dependencies:**
-- None
+- [S-Expression File Format](#v6_sch_sexpr).
 
 **Status:**
 - No progress.
@@ -292,7 +443,7 @@ Add support for keepout zones on boards and footprints.
 - [DRC Improvements.](#v6_drc_improvements)
 
 **Progress:**
-- Planning
+- In progress.
 
 ## Clipboard Support ## {#v6_fp_edit_clipboard}
 **Goal:**
@@ -307,7 +458,7 @@ Provide clipboard cut and paste for footprints.
 - None
 
 **Status:**
-- No progress.
+- Complete.
 
 ## Net Highlighting ## {#v6_pcb_net_highlight}
 **Goal:**
@@ -323,7 +474,7 @@ Highlight rats nest links and/or traces when corresponding net in Eeschema is se
 - None.
 
 **Status:**
-- No progress.
+- Complete.
 
 ## Hatched Zone Filling ## {#v6_pcb_hatched_zones}
 **Goal:**
@@ -339,7 +490,7 @@ with hatching.
 - None.
 
 **Status:**
-- No progress.
+- Complete.
 
 ## Board Stack Up Impedance Calculator ## {#v6_pcb_impedance_calc}
 **Goal:**
@@ -354,7 +505,7 @@ Maybe this should be included in the PCB calculator application.
 - None.
 
 **Status:**
-- No progress.
+- In progress.
 
 ## Net Class Improvements ## {#v6_pcb_net_class_improvements}
 **Goal:**
@@ -378,9 +529,10 @@ Add support for route impedance, color selection, etc in net class object.
 ## Ratsnest Improvements ## {#v6_pcb_ratsnest_improvements}
 **Goal:**
 
-Add support for per net color and visibility settings.
+Add support for curved rats and per net color and visibility settings.
 
 **Task:**
+- Implement rat curving to minimize overlapped rats.
 - Implement UI code to configure ratsnest color and visibility.
 - Update ratsnest code to handle per net color and visibility.
 
@@ -388,23 +540,312 @@ Add support for per net color and visibility settings.
 - None.
 
 **Status:**
-- No progress.
+- Curved rat support complete.
 
-
-# GerbView: Gerber File Viewer # {#v6_gerbview}
-
-This section covers the source code for the GerbView gerber file viewer.
-
-## Graphics Abstraction Layer ## {#v6_gerbview_gal}
+## DXF Improvements ## {#v6_pcb_dxf_import}
 **Goal:**
 
-Graphics rendering unification.
+- Allow for anchor point setting and layer mapping support on DXF import and
+  export multiple board layers to a single DXF file.
 
 **Task:**
-- Port graphics rendering layer to GAL.
+- Provide method to select DXF import anchor point.
+- Add user interface to allow mapping DXF layers to board layers.
+- Modify DXF plotting to export multiple layers to a single file.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No progress.
+
+## Improve Dimension Tool ## {#v6_pcb_dim_tool}
+**Goal:**
+
+Make dimensions link to objects and change when objects are modified and add
+basic mechanical constraints.
+
+**Task:**
+- Add code to link dimension to objects.
+- Add basic mechanical constraints like linear distance and angle.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- In progress.
+
+## Constraint Management System ## {#v6_pcb_constraint}
+**Goal:**
+
+Implement full featured constraint management system to allow for complex
+board constraints instead of netclass only constraints.
+
+**Task:**
+- Write specification to define requirement of new constraint system.
+- Implement new constraint system including file format changes.
+- Allow constraints to be defined in schematic editor and passed to board
+  editor via netlist.
+- Update netlist file format to support constraints.
+- Update DRC to test new constraints.
 
 **Dependencies:**
 - None.
 
 **Status**
+- No Progress.
+
+## Append Board in Project Mode ## {#v6_pcb_append}
+**Goal:**
+
+Allow appending to the board when running Pcbnew in the project mode.
+
+**Task:**
+- Enable append board feature in project mode.
+- Extend copy/paste feature to introduce paste special tool to add prefix
+  and/or suffix to nets of pasted/appended objects.
+
+**Dependencies:**
+- None.
+
+**Status:**
 - No progress.
+
+## Grid and Auxiliary Origin Improvements ## {#v6_pcb_origin}
+**Goal:**
+
+Allow reset grid and auxiliary origin without hotkey only.  Add support to
+make all coordinates relative to the plot origin.
+
+**Task:**
+- Add reset grid and auxiliary origin commands to menu entry and/or toolbar
+  button.
+- Add code to dialogs to allow coordinates to be specified relative to the
+  plot origin.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Relative coordinate entry in progress.
+
+## Addition Mechanical Layers ## {#v6_pcb_mech_layers}
+**Goal:**
+
+Add more mechanical layers.
+
+**Task:**
+- Add remaining mechanical layers for a total of 32.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No progress.
+
+## Layer Renaming ## {#v6_pcb_layer_rename}
+**Goal:**
+
+Allow mechanical layers to be renamed.
+
+**Task:**
+- Quote layer names in file format to support any printable characters in
+  layer names.
+- Add user interface to allow mechanical layers to be renamed.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Quoted layer names complete.
+
+## Stable Python API ## {#v6_pcb_python_api}
+**Goal:**
+
+Create a Python wrapper to hide the SWIG generated API.
+
+**Task:**
+- Document new Python API.
+- Write Python API.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Initial technical specification drafted.
+
+## Track Refining ## {#v6_pcb_track_refine}
+**Goal:**
+
+Add support for teardrops and automatically updating length tuning
+meandering.
+
+**Task:**
+- Draft specification for track refining.
+- Implement support for teardrops.
+- Implement support for changing tuned length meandering.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Initial technical specification drafted.
+
+## Groups and Rooms  ## {#v6_pcb_groups}
+**Goal:**
+
+Support grouping board objects into reusable snippets.
+
+**Task:**
+- Write design specification.
+- Update board file format to support grouped objects.
+- Add user interface code to support grouped board objects.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Initial technical specification drafted.
+
+## Pad Stack Support ## {#v6_pcb_padstack}
+**Goal:**
+
+Add padstack support.
+
+**Task:**
+- Write pad stack design specification.
+- Update board file format to support pad stacks.
+- Add user interface code to support designing pad stack objects.
+- Update push and shove router to handle pad stacks.
+- Update zone filling to handle pad stacks.
+- Update DRC to handle pad stacks.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- Initial technical specification drafted.
+
+## Net Ties ## {#v6_pcb_net_ties}
+**Goal:**
+
+Add support for net ties.
+
+**Task:**
+- Write net tie design specification.
+- Implement board file support for net ties.
+- Implement schematic file support for net ties.
+- Update ERC and DRC to handle net ties.
+- Update netlist to pass net tie information from schematic to board.
+- Add user interface support for net ties to editors.
+
+**Dependencies:**
+- [S-Expression File Format](#v6_sch_sexpr).
+
+**Status:**
+- No Progress.
+
+## Anti-pad Improvements ## {#v6_pcb_anti_pad}
+**Goal:**
+
+Use anti-pads on vias and through hold pads on internal layers as required.
+
+**Task:**-
+- Revise zone filling algorithm to create anti-pad on internal layers.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No Progress.
+
+## Thermal Relief Improvements ## {#v6_pcb_thermal_relief}
+**Goal:**
+
+Allow for custom thermal reliefs in zones and custom pad shapes.
+
+**Task:**-
+- Write technical specification to define requirements, alternate unions,
+  knockouts, union spokes, etc.
+- Revise zone filling thermal relief support to handle new requirements.
+- Update board file format for new thermal relief requirements.
+- Add user interface support for thermal relief definitions.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No Progress.
+
+## Merge KiCad2Step ## {#v6_pcb_kicad2step}
+**Goal:**
+
+Merge export to STEP file code from KiCad2Step so that conversion does
+not run in a separate process.
+
+**Task:**-
+- Merge KiCad2Step code into Pcbnew code base.
+- Remove unused parser code.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No Progress.
+
+## 3D Model Improvements ## {#v6_pcb_3d_model_opacity}
+**Goal:**
+
+Add opacity to 3D model support and convert from path look up to library
+table to access 3D models.
+
+**Task:**-
+- Add opacity support to footprint library file format.
+- Add library table 3D model support to footprint library file format.
+- Create remapping utility to map from path look up to library table look up.
+- Add user interface support for 3D model opacity.
+- Add user interface support accessing 3D models via library table.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No Progress.
+
+## IPC-2581 Support ## {#v6_pcb_ipc_2581}
+**Goal:**
+
+Add support for exporting to and importing from IPC-2581.
+
+**Task:**-
+- Add IPC-2581 export code.
+- Add IPC-2581 import code.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No Progress.
+
+## Curved Trace Support ## {#v6_pcb}
+**Goal:**
+
+Add curved trace support to the board editor.
+
+**Task:**-
+- Add curved trace support to track object code.
+- Add support to board file format for curved traces.
+- Update zone fill algorithm to support curved fills.
+- Update router to support curved traces.
+- Update DRC to handle curved traces and fills.
+
+**Dependencies:**
+- None.
+
+**Status:**
+- No Progress.
+
+
+# GerbView: Gerber File Viewer # {#v6_gerbview}
+
+This section covers the source code for the GerbView gerber file viewer.

Documentation/development/road-map.md

@@ -3,14 +3,16 @@
 This document is the KiCad Developer's road map document.  It is a living
 document that should be maintained as the project progresses.  The goal of
 this document is to provide an overview for developers of where the project
-is headed to prevent resource conflicts and endless rehashing of previously
-discussed topics.  It is broken into sections for each major component of
-the KiCad source code and documentation.  It defines tasks that developers
-an use to contribute to the project and provides updated status information.
-Tasks should define clear objective and avoid vague generalizations so that
-a new developer can complete the task.  It is not a place for developers to
-add their own personal wish list  It should only be updated with approval
-of the project manager after discussion with the lead developers.
+is headed beyond the current development cycle road map (currently
+[version 6](./v6_road_map.html) to prevent resource conflicts and endless
+rehashing of previously discussed topics.  It is broken into sections for
+each major component of the KiCad source code and documentation.  It defines
+tasks that developers an use to contribute to the project and provides updated
+status information.  Tasks should define clear objectives and avoid vague
+generalizations so that a new developer can complete the task.  It is not a
+place for developers to add their own personal wish list  It should only be
+updated with approval of the project manager after discussion with the lead
+developers.
 
 Each entry in the road map is made up of four sections.  The goal should
 be a brief description of the what the road map entry will accomplish.  The
@@ -34,59 +36,16 @@ This section defines the tasks that affect all or most of KiCad or do not
 fit under as specific part of the code such as the board editor or the
 schematic editor.
 
-## User Interface Modernization ## {#wxaui}
-**Goal:**
-
-Give KiCad a more modern user interface with dockable tool bars and windows.
-Create perspectives to allow users to arrange dockable windows as they prefer.
-
-**Task:**
-- Take advantage of the advanced UI features in wxAui such as detaching and
-  hiding.
-- Study ergonomics of various commercial/proprietary PCB applications (when
-  in doubt about any particular UI solution, check how it has been done in a
-  certain proprietary app that is very popular among OSHW folks and do exactly
-  opposite).
-- Clean up menu structure. Menus must allow access to all features of the
-  program in a clear and logical way. Currently some functions of Pcbnew are
-  accessible only through tool bars
-- Redesign dialogs, make sure they are following same style rules.
-- Check quality of translations. Either fix or remove bad quality translations.
-- Develop a global shortcut manager that allows the user assign arbitrary
-  shortcuts for any tool or action.
-
-**Dependencies:**
-- [wxWidgets 3](#wxwidgets3)
-
-**Status:**
-- No progress.
-
 
 # Build Tools # {#build_tools}
 This section covers build tools for both the KiCad source as well as the
 custom dependency builds required to build KiCad.
 
+
 # Common Library # {#common_lib}
 This section covers the source code shared between all of the KiCad
 applications
 
-## Unified Rendering Framework ## {#unified_rendering}
-**Goal:**
-
-Provide a single framework for developing new tools.  Port existing tools
-to the new framework and remove the legacy framework tools.
-
-**Task:**
-- Port wxDC to GAL or get Cairo rendering to nearly the performance of the
-  current wxDC rendering so that we have a single framework to develop new
-  tools and we can continue to support systems that don't have a complete
-  OpenGL stack.
-
-**Dependencies**
-- [Tool framework](http://www.ohwr.org/projects/cern-kicad/wiki/WorkPackages)
-
-**Status**
-- No progress
 
 # KiCad: Application Launcher # {#kicad}
 This section applies to the source code for the KiCad application launcher.
@@ -95,277 +54,19 @@ This section applies to the source code for the KiCad application launcher.
 # Eeschema: Schematic Editor # {#eeschema}
 This section applies to the source code for the Eeschema schematic editor.
 
-## Graphics Abstraction Layer Conversion ## {#sch_gal}
-**Goal:**
-
-Take advantage of advanced graphics rendering in Eeschema.
-
-**Task:**
-- Port graphics rendering to GAL.
-
-**Dependencies:**
-- None
-
-**Status:**
-- No progress.
-
-## Port Editing Tools ## {#sch_tool_framework}
-**Goal:**
-
-Use standard tool framework across all applications.
-
-**Task:**
-- Rewrite editing tools using the new tool framework.
-
-**Dependencies:**
-- [GAL port](#sch_gal).
-
-**Status:**
-- No progress.
-
-## Allow Use of System Fonts ## {#sch_sys_fonts}
-**Goal:**
-
-Currently the schematic editor uses the stroke drawn fonts which aren't really
-necessary for accurated printing of schematics.  Allow the use of system fonts
-for schematic text.
-
-**Task:**
-- Determine which library for font handling makes the most sense, wxWidgets or
-  freetype.
-- Add support for selecting text object fonts.
-
-**Dependencies:**
-- [S-expression schematic file format](#sch_sexpr).
-
-**Status:**
-- No progress.
 
 # CvPcb: Footprint Association Tool # {#cvpcb}
 This section covers the source code of the footprint assignment tool CvPcb.
 
+
 # Pcbnew: Circuit Board Editor # {#pcbnew}
 This section covers the source code of the board editing application Pcbnew.
 
-## Model Export ## {#model_export}
-
-**Goal:**
-
-Provide improved solid modeling export to the file formats available in
-OpenCascade.
-
-**Task:**
-- Add STEP 3D modeling capability.
-- Add IGES 3D modeling capability.
-- Add any other file formats supported by OpenCascade that make sense for
-  KiCad.
-
-**Dependencies:**
-- None
-
-**Status:**
-- None
-
-## Linked Objects ## {#pcb_linked_objects}
-**Goal:**
-
-Provide a way to allow external objects such as footprints to be externally
-linked in the board file so that changes in the footprint are automatically
-updated.  This will all a one to many object relationship which can pave the
-way for real board modules.
-
-**Task:**
-- Add externally and internally linked objects to the file format to allow for
-  footprints and/or other board objects to be shared (one to many relationship)
-  instead of only supporting embedded objects (one to one relationship) that
-  can only be edited in place.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
-## Pin and Part Swapping ## {#pcb_drc}
-**Goal:**
-
-Allow Pcbnew to perform pin and/or part swapping during layout so the user
-does not have to do it in Eeschema and re-import the net list.
-
-**Task:**
-- Provide forward and back annotation between the schematic and board editors.
-- Define netlist file format changes required to handle pin/part swapping.
-- Update netlist file formatter and parser to handle file format changes.
-- Develop a netlist comparison engine that will produce a netlist diff that
-  can be passed between the schematic and board editors.
-- Create pin/part swap dialog to manipulate swappable pins and parts.
-- Add support to handle net label back annotation changes.
-
-**Dependencies:**
-- [S-expression schematic file format](#sch_sexpr).
-- [Convert to a single process application](#kiway).
-
-**Status:**
-- No progress.
-
-## Clipboard Support ## {#fp_edit_clipboard}
-**Goal:**
-
-Provide clipboard cut and paste for footprints..
-
-**Task:**
-- Clipboard cut and paste to and from clipboard of footprints in footprint
-  editor.
-
-**Dependencies:**
-- None
-
-**Status:**
-- No progress.
-
-## Segment End Point Snapping. ## {#segment_snapping}
-**Goal:**
-
-It is not uncommon for board edge segment end points to inadvertently not
-be closed causing issues for the 3D viewer and exporting to different file
-formats due the board outline not being a fully enclosed polygon.  This
-feature would add segment end snapping support to allow the board outline
-to be fully enclosed.  This feature would only need to be supported by the
-GAL rendering.
-
-**Tasks**
-- Mark board edge segment ends with a drag indicator to make it visible to the
-  user that the segment end does not have an endpoint with any other board edge
-  segment.
-- Allow the user to smap the unconnected segment end to the nearest segment end
-  point.
-- Automatically connect unconnected segments with and additional segment when
-  opening the 3D viewer or exporting the board to another format.  Warn the
-  user that an addition segment has be added and should be verified.
-
-**Dependencies:**
-- None
-
-**Progress:**
-- Initial discussion.
-
-## Keepout Zones. ## {#keepout_zones}
-**Goal:**
-
-Add support for keepout zones on boards and footprints.
-
-**Task:**
-- Add keepout support to zone classes.
-- Add keepout zone support to board editor.
-- Add keepout zone support to library editor.
-
-**Dependencies:**
-- [DRC Improvements.](#drc_improvements)
-
-**Progress:**
-- Planning
-
-
-## Net Highlighting ## {#pcb_net_highlight}
-**Goal:**
-
-Highlight rats nest links and/or traces when corresponding net in Eeschema is selected.
-
-**Task:**
-- Add communications link to handle net selection from Eeschema.
-- Implement highlight algorithm for objects connected to the selected net.
-- Highlight objects connected to net selected in Eeschema
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
-## Hatched Zone Filling ## {#pcb_hatched_zones}
-**Goal:**
-
-Currently Pcbnew only supports solid zone files.  Add option to fill zones
-with hatching.
-
-**Task:**
-- Determine zone fill method, required filling code, and file format requirements.
-- Add hatch option and hatch configuration to zone dialog.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
-
-## Board Stack Up Impedance Calculator ## {#pcb_impedance_calc}
-**Goal:**
-
-Provide a calculator to compute trace impedances using a full board stackup.
-Maybe this should be included in the PCB calculator application.
-
-**Task:**
-- Design a trace impedance calculator that includes full board stackup.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
-## Net Class Improvements ## {#pcb_net_class_improvements}
-**Goal:**
-
-Add support for route impedance, color selection, etc in net class object.
-
-**Task:**
-- Determine parameters to add to net class object.
-- Implement file parser and formatter changes to support net class object
-  changes.
-- Implement tools to work with new net class parameters.
-- Create UI elements to configure new net class parameters.
-- Update the render tab UI code to view traces by net class.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
-## Ratsnest Improvements ## {#pcb_ratsnest_improvements}
-**Goal:**
-
-Add support for per net color and visibility settings.
-
-**Task:**
-- Implement UI code to configure ratsnest color and visibility.
-- Update ratsnest code to handle per net color and visibility.
-
-**Dependencies:**
-- None.
-
-**Status:**
-- No progress.
-
 
 # GerbView: Gerber File Viewer # {#gerbview}
 
 This section covers the source code for the GerbView gerber file viewer.
 
-## Graphics Abstraction Layer ## {#gerbview_gal}
-**Goal:**
-
-Graphics rendering unification.
-
-**Task:**
-- Port graphics rendering layer to GAL.
-
-**Dependencies:**
-- None.
-
-**Status**
-- No progress.
 
 # Documentation # {#documentation}
 This section defines the tasks for both the user and developer documentation.
@@ -380,6 +81,7 @@ This section defines the tasks for both the user and developer documentation.
 **Status:**
 - No progress.
 
+
 # Unit Testing # {#unittest}
 **Goal:**
 
@@ -399,5 +101,5 @@ capabilities.
 - In progress.
 
 
-[kicad-website]:http://kicad-pcb.org/
-[kicad-docs]:http://ci.kicad-pcb.org/job/kicad-doxygen/ws/Documentation/doxygen/html/index.html
+[kicad-website]:http://kicad.org/
+[kicad-docs]:http://ci.kicad.org/job/kicad-doxygen/ws/Documentation/doxygen/html/index.html

Documentation/development/stable-release-policy.md

@@ -71,7 +71,7 @@ GitHub plugin.
 
 To provide a convenient method for system packagers to build KiCad from known stable sources,
 source archives in the most common formats along with the resulting md5sum checksum will be
-added to either the KiCad developer's site on Launchpad or the main website at www.kicad-pcb.org.
+added to either the KiCad developer's site on Launchpad or the main website at www.kicad.org.
 
 # Stable Release Announcement # {#announcement}
 

Documentation/development/testing.md

@@ -285,7 +285,7 @@ Some available masks:
     * `KICAD_GEDA_PLUGIN`
     * `KICAD_PCB_PLUGIN`
 
-# Advanced configuration
+# Advanced configuration {#advanced-configuration}
 
 There are some advance configuration options, which are mostly used for
 development or testing purposes.
@@ -294,11 +294,16 @@ To set these options, you can create the file `kicad_advanced` and set the keys
 as desired (the [advanced config documentation][] for a current list. You should
 never need to set these keys for normal usage - if you do, that's a bug.
 
+Any features enabled though the advanced configuration system are
+considered experimental and therefore unsuitable for production use. These
+features are explicitly not supported or considered fully tested.
+Issues are still welcome for defects discovered.
+
 
 [CTest]: https://cmake.org/cmake/help/latest/module/CTest.html
 [Boost Unit Test framework]: https://www.boost.org/doc/libs/1_68_0/libs/test/doc/html/index.html
 [boost-test-functions]: https://www.boost.org/doc/libs/1_68_0/libs/test/doc/html/boost_test/utf_reference/testing_tool_ref.html
 [AFL fuzzing tool]: http://lcamtuf.coredump.cx/afl/
-[trace mask documentation]: http://docs.kicad-pcb.org/doxygen/group__trace__env__vars.html
-[trace mask documentation]: http://docs.kicad-pcb.org/doxygen/group__trace__env__vars.html
-[advanced config documentation]: http://docs.kicad-pcb.org/doxygen/namespaceAC__KEYS.html
+[trace mask documentation]: http://docs.kicad.org/doxygen/group__trace__env__vars.html
+[trace mask documentation]: http://docs.kicad.org/doxygen/group__trace__env__vars.html
+[advanced config documentation]: http://docs.kicad.org/doxygen/namespaceAC__KEYS.html

Documentation/development/tool-framework.md

@@ -105,18 +105,18 @@ The major parts of tool's implementation are the functions used by the
   when the GAL canvas is switched, and also just after tool registration.
   Any resource claimed from the GAL view or the model must be released
   in this function, as they could become invalid.
-* `SetTransitions()` function, which maps tool actions to functions
+* `setTransitions()` function, which maps tool actions to functions
   within the tool class.
 * One or more functions to call when actions are invoked. Many actions
   can invoke the same function if desired. The functions have the
   following signature:
     * int TOOL_CLASS::FunctionName( const TOOL_EVENT& aEvent )
-        * Returning 0 means success.
+    * Returning 0 means success.
     * These functions are called by the `TOOL_MANAGER` in case an associated
       event arrives (association is created with TOOL_INTERACTIVE::Go() function).
     * These can generally be private, as they are not called directly
       by any other code, but are invoked by the tool manager's coroutine
-      framework according to the `SetTransitions()` map.
+      framework according to the `setTransitions()` map.
 
 ### Interactive actions {#interactive-actions}
 
@@ -171,7 +171,7 @@ provide their own context menu. Tools that are called only from other
 tools' interactive modes add their menu items to those tools' menus.
 
 To use a `TOOL_MENU` in a top level tool, simply add one as a member
-and initialise it with a reference to the tools at construction time:
+and initialize it with a reference to the tools at construction time:
 
     TOOL_NAME: public PCB_TOOL
     {
@@ -215,7 +215,7 @@ The procedure of a commit is:
   unless you are going to abort the commit.
 * When removing an item, call `Remove( item )`. You should not delete the
   removed item, it will be stored in the undo buffer.
-* Finalise the commit with `Push( "Description" )`. If you performed
+* Finalize the commit with `Push( "Description" )`. If you performed
   no modifications, additions or removals, this is a no-op, so you
   don't need to check if you made any changes before pushing.
 
@@ -284,7 +284,7 @@ In `pcbnew/tools/pcb_actions.h`, we add the following to the
     static TOOL_ACTION uselessFixedCircle;
 
 Definitions of actions generally happen in the .cpp of the relevant tool.
-It doesn't actually matter where the defintion occurs (the declaration
+It doesn't actually matter where the definition occurs (the declaration
 is enough to use the action), as long as it's linked in the end.
 Similar tools should always be defined together.
 
@@ -337,11 +337,11 @@ the following class:
         ///> React to model/view changes
         void Reset( RESET_REASON aReason ) override;
 
-        ///> Basic initalization
+        ///> Basic initialization
         bool Init() override;
 
         ///> Bind handlers to corresponding TOOL_ACTIONs
-        void SetTransitions() override;
+        void setTransitions() override;
 
     private:
         ///> 'Move selected left' interactive tool
@@ -392,7 +392,7 @@ Below you will find the contents of useless_tool.cpp:
 
 
     /*
-     * Tool-specific action defintions
+     * Tool-specific action definitions
      */
     TOOL_ACTION PCB_ACTIONS::uselessMoveItemLeft(
             "pcbnew.UselessTool.MoveItemLeft",
@@ -443,7 +443,7 @@ Below you will find the contents of useless_tool.cpp:
     void USELESS_TOOL::moveLeftInt()
     {
         // we will call actions on the selection tool to get the current
-        // selection. The selection tools will handle item deisambiguation
+        // selection. The selection tools will handle item disambiguation
         SELECTION_TOOL* selectionTool = m_toolMgr->GetTool<SELECTION_TOOL>();
         assert( selectionTool );
 
@@ -535,7 +535,7 @@ Below you will find the contents of useless_tool.cpp:
     }
 
 
-    void USELESS_TOOL::SetTransitions()
+    void USELESS_TOOL::setTransitions()
     {
         Go( &USELESS_TOOL::fixedCircle, PCB_ACTIONS::uselessFixedCircle.MakeEvent() );
         Go( &USELESS_TOOL::moveLeft,    PCB_ACTIONS::uselessMoveItemLeft.MakeEvent() );

LICENSE.BOOSTv1_0

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

LICENSE.CC-BY-SA-4.0

@@ -0,0 +1,255 @@
+Creative Commons Attribution-ShareAlike 4.0 International Public License
+
+By exercising the Licensed Rights (defined below), You accept and agree to
+be bound by the terms and conditions of this Creative Commons
+Attribution-ShareAlike 4.0 International Public License ("Public License").
+To the extent this Public License may be interpreted as a contract, You are
+granted the Licensed Rights in consideration of Your acceptance of these
+terms and conditions, and the Licensor grants You such rights in
+consideration of benefits the Licensor receives from making the Licensed
+Material available under these terms and conditions.
+
+Section 1 – Definitions.
+
+a.  Adapted Material means material subject to Copyright and Similar Rights
+    that is derived from or based upon the Licensed Material and in which the
+    Licensed Material is translated, altered, arranged, transformed, or
+    otherwise modified in a manner requiring permission under the Copyright
+    and Similar Rights held by the Licensor. For purposes of this Public
+    License, where the Licensed Material is a musical work, performance, or
+    sound recording, Adapted Material is always produced where the Licensed
+    Material is synched in timed relation with a moving image.
+b.  Adapter's License means the license You apply to Your Copyright and
+    Similar Rights in Your contributions to Adapted Material in accordance
+    with the terms and conditions of this Public License.
+c.  BY-SA Compatible License means a license listed at
+    creativecommons.org/compatiblelicenses, approved by Creative Commons as
+    essentially the equivalent of this Public License.
+d.  Copyright and Similar Rights means copyright and/or similar rights closely
+    related to copyright including, without limitation, performance,
+    broadcast, sound recording, and Sui Generis Database Rights, without
+    regard to how the rights are labeled or categorized. For purposes of this
+    Public License, the rights specified in Section 2(b)(1)-(2) are not
+    Copyright and Similar Rights.
+e.  Effective Technological Measures means those measures that, in the absence
+    of proper authority, may not be circumvented under laws fulfilling
+    obligations under Article 11 of the WIPO Copyright Treaty adopted on
+    December 20, 1996, and/or similar international agreements.
+f.  Exceptions and Limitations means fair use, fair dealing, and/or any other
+    exception or limitation to Copyright and Similar Rights that applies to
+    Your use of the Licensed Material.
+g.  License Elements means the license attributes listed in the name of a
+    Creative Commons Public License. The License Elements of this Public
+    License are Attribution and ShareAlike.
+h.  Licensed Material means the artistic or literary work, database, or other
+    material to which the Licensor applied this Public License.
+i.  Licensed Rights means the rights granted to You subject to the terms and
+    conditions of this Public License, which are limited to all Copyright and
+    Similar Rights that apply to Your use of the Licensed Material and that
+    the Licensor has authority to license.
+j.  Licensor means the individual(s) or entity(ies) granting rights under this
+    Public License.
+k.  Share means to provide material to the public by any means or process thati
+    requires permission under the Licensed Rights, such as reproduction,
+    public display, public performance, distribution, dissemination,
+    communication, or importation, and to make material available to the
+    public including in ways that members of the public may access the
+    material from a place and at a time individually chosen by them.
+l.  Sui Generis Database Rights means rights other than copyright resulting
+    from Directive 96/9/EC of the European Parliament and of the Council of 11
+    March 1996 on the legal protection of databases, as amended and/or
+    succeeded, as well as other essentially equivalent rights anywhere in the
+    world.
+m.  You means the individual or entity exercising the Licensed Rights under
+    this Public License. Your has a corresponding meaning.
+
+Section 2 – Scope.
+
+a.  License grant.
+    1. Subject to the terms and conditions of this Public License, the
+       Licensor hereby grants You a worldwide, royalty-free,
+       non-sublicensable, non-exclusive, irrevocable license to exercise the
+       Licensed Rights in the Licensed Material to:
+        A. reproduce and Share the Licensed Material, in whole or in part; and
+        B. produce, reproduce, and Share Adapted Material.
+    2. Exceptions and Limitations. For the avoidance of doubt, where Exceptions
+       and Limitations apply to Your use, this Public License does not apply,
+       and you do not need to comply with its terms and conditions.
+    3. Term. The term of this Public License is specified in Section 6(a).
+    4. Media and formats; technical modifications allowed. The Licensor
+       authorizes You to exercise the Licensed Rights in all media and formats
+       whether now known or hereafter created, and to make technical
+       modifications necessary to do so. The Licensor waives and/or agrees not
+       to assert any right or authority to forbid You from making technical
+       modifications necessary to exercise the Licensed Rights, including
+       technical modifications necessary to circumvent Effective Technological
+       Measures.  For purposes of this Public License, simply making
+       modifications authorized by this Section 2(a)(4) never produces Adapted
+       Material.
+    5. Downstream recipients.
+        A. Offer from the Licensor – Licensed Material. Every recipient of the
+           Licensed Material automatically receives an offer from the Licensor
+           to exercise the Licensed Rights under the terms and conditions of
+           this Public License.
+        B. Additional offer from the Licensor – Adapted Material. Every
+           recipient of Adapted Material from You automatically receives an
+           offer from the Licensor to exercise the Licensed Rights in the
+           Adapted Material under the conditions of the Adapter’s License You
+           apply.
+        C. No downstream restrictions. You may not offer or impose any
+           additional or different terms or conditions on, or apply any
+           Effective Technological Measures to, the Licensed Material if doing
+           so restricts exercise of the Licensed Rights by any recipient of
+           the Licensed Material.
+    6. No endorsement. Nothing in this Public License constitutes or may be
+       construed as permission to assert or imply that You are, or that Your
+       use of the Licensed Material is, connected with, or sponsored,
+       endorsed, or granted official status by, the Licensor or others
+       designated to receive attribution as provided in Section 3(a)(1)(A)(i).
+
+b.  Other rights.
+    1. Moral rights, such as the right of integrity, are not licensed under
+       this Public License, nor are publicity, privacy, and/or other similar
+       personality rights; however, to the extent possible, the Licensor
+       waives and/or agrees not to assert any such rights held by the Licensor
+       to the limited extent necessary to allow You to exercise the Licensed
+       Rights, but not otherwise.
+    2. Patent and trademark rights are not licensed under this Public License.
+    3. To the extent possible, the Licensor waives any right to collect
+       royalties from You for the exercise of the Licensed Rights, whether
+       directly or through a collecting society under any voluntary or
+       waivable statutory or compulsory licensing scheme. In all other cases
+       the Licensor expressly reserves any right to collect such royalties.
+
+Section 3 – License Conditions.
+
+Your exercise of the Licensed Rights is expressly made subject to the
+following conditions.
+
+a.  Attribution.
+    1. If You Share the Licensed Material (including in modified form), You
+       must:
+        A. retain the following if it is supplied by the Licensor with the
+           Licensed Material:
+         i. identification of the creator(s) of the Licensed Material and any
+            others designated to receive attribution, in any reasonable manner
+            requested by the Licensor (including by pseudonym if designated);
+        ii. a copyright notice;
+       iii. a notice that refers to this Public License;
+        iv. a notice that refers to the disclaimer of warranties;
+         v. a URI or hyperlink to the Licensed Material to the extent
+            reasonably practicable;
+        B. indicate if You modified the Licensed Material and retain an
+           indication of any previous modifications; and
+        C. indicate the Licensed Material is licensed under this Public
+           License, and include the text of, or the URI or hyperlink to, this
+           Public License.
+    2. You may satisfy the conditions in Section 3(a)(1) in any reasonable
+       manner based on the medium, means, and context in which You Share the
+       Licensed Material. For example, it may be reasonable to satisfy the
+       conditions by providing a URI or hyperlink to a resource that includes
+       the required information.
+    3. If requested by the Licensor, You must remove any of the information
+       required by Section 3(a)(1)(A) to the extent reasonably practicable.
+
+b.  ShareAlike.
+    In addition to the conditions in Section 3(a), if You Share Adapted
+    Material You produce, the following conditions also apply.
+    1. The Adapter’s License You apply must be a Creative Commons license with
+       the same License Elements, this version or later, or a BY-SA Compatible
+       License.
+    2. You must include the text of, or the URI or hyperlink to, the Adapter's
+       License You apply. You may satisfy this condition in any reasonable
+       manner based on the medium, means, and context in which You Share
+       Adapted Material.
+    3. You may not offer or impose any additional or different terms or
+       conditions on, or apply any Effective Technological Measures to,
+       Adapted Material that restrict exercise of the rights granted under the
+       Adapter's License You apply.
+
+Section 4 – Sui Generis Database Rights.
+
+Where the Licensed Rights include Sui Generis Database Rights that apply to
+Your use of the Licensed Material:
+a. for the avoidance of doubt, Section 2(a)(1) grants You the right to
+   extract, reuse, reproduce, and Share all or a substantial portion of the
+   contents of the database;
+b. if You include all or a substantial portion of the database contents in a
+   database in which You have Sui Generis Database Rights, then the database
+   in which You have Sui Generis Database Rights (but not its individual
+   contents) is Adapted Material, including for purposes of Section 3(b); and
+c. You must comply with the conditions in Section 3(a) if You Share all or a
+   substantial portion of the contents of the database.
+
+For the avoidance of doubt, this Section 4 supplements and does not replace
+Your obligations under this Public License where the Licensed Rights include
+other Copyright and Similar Rights.
+
+Section 5 – Disclaimer of Warranties and Limitation of Liability.
+
+a. Unless otherwise separately undertaken by the Licensor, to the extent
+   possible, the Licensor offers the Licensed Material as-is and as-available,
+   and makes no representations or warranties of any kind concerning the
+   Licensed Material, whether express, implied, statutory, or other. This
+   includes, without limitation, warranties of title, merchantability, fitness
+   for a particular purpose, non-infringement, absence of latent or other
+   defects, accuracy, or the presence or absence of errors, whether or not
+   known or discoverable. Where disclaimers of warranties are not allowed in
+   full or in part, this disclaimer may not apply to You.
+b. To the extent possible, in no event will the Licensor be liable to You on
+   any legal theory (including, without limitation, negligence) or otherwise
+   for any direct, special, indirect, incidental, consequential, punitive,
+   exemplary, or other losses, costs, expenses, or damages arising out of
+   this Public License or use of the Licensed Material, even if the Licensor
+   has been advised of the possibility of such losses, costs, expenses, or
+   damages. Where a limitation of liability is not allowed in full or in
+   part, this limitation may not apply to You.
+c. The disclaimer of warranties and limitation of liability provided above
+   shall be interpreted in a manner that, to the extent possible, most
+   closely approximates an absolute disclaimer and waiver of all liability.
+
+Section 6 – Term and Termination.
+
+a. This Public License applies for the term of the Copyright and Similar
+   Rights licensed here. However, if You fail to comply with this Public
+   License, then Your rights under this Public License terminate
+   automatically.
+b. Where Your right to use the Licensed Material has terminated under
+   Section 6(a), it reinstates:
+   1. automatically as of the date the violation is cured, provided it is
+      cured within 30 days of Your discovery of the violation; or
+   2. upon express reinstatement by the Licensor.
+   For the avoidance of doubt, this Section 6(b) does not affect any right
+   the Licensor may have to seek remedies for Your violations of this Public
+   License.
+c. For the avoidance of doubt, the Licensor may also offer the Licensed
+   Material under separate terms or conditions or stop distributing the
+   Licensed Material at any time; however, doing so will not terminate this
+   Public License.
+d. Sections 1, 5, 6, 7, and 8 survive termination of this Public License.
+
+Section 7 – Other Terms and Conditions.
+
+a. The Licensor shall not be bound by any additional or different terms or
+   conditions communicated by You unless expressly agreed.
+b. Any arrangements, understandings, or agreements regarding the Licensed
+   Material not stated herein are separate from and independent of the terms
+   and conditions of this Public License.
+
+Section 8 – Interpretation.
+
+a. For the avoidance of doubt, this Public License does not, and shall not
+   be interpreted to, reduce, limit, restrict, or impose conditions on any use
+   of the Licensed Material that could lawfully be made without permission
+   under this Public License.
+b. To the extent possible, if any provision of this Public License is deemed
+   unenforceable, it shall be automatically reformed to the minimum extent
+   necessary to make it enforceable. If the provision cannot be reformed, it
+   shall be severed from this Public License without affecting the
+   enforceability of the remaining terms and conditions.
+c. No term or condition of this Public License will be waived and no failure
+   to comply consented to unless expressly agreed to by the Licensor.
+d. Nothing in this Public License constitutes or may be interpreted as a
+   limitation upon, or waiver of, any privileges and immunities that apply to
+   the Licensor or You, including from the legal processes of any jurisdiction
+   or authority.

LICENSE.ISC

@@ -0,0 +1,10 @@
+Permission to use, copy, modify, and/or distribute this software for any purpose 
+with or without fee is hereby granted, provided that the above copyright notice 
+and this permission notice appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH 
+REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND 
+FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, 
+OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA 
+OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, 
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

LICENSE.MIT

@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

LICENSE.README

@@ -1,13 +1,23 @@
-The majority of KiCad's source code is developed and distributed under the terms
-of the GPLv3 or later. However, It does include some third-party code licensed
-under AGPLv3 or later.
-
-Both licenses are compatible, but a combined works as is will be governed under
-the terms of the AGPLv3 (or later). This includes any binary distribution of the
-KiCad EDA suite by the KiCad project or any third party, e.g. Linux distributor.
-
-You are free to use the *sources* under the terms of their respective licenses.
-
-Licensed under AGPLv3 (or later):
-- TTL [https://www.sintef.no/projectweb/geometry-toolkits/ttl/], sources in include/ttl/*
-Licensed under GPLv3 (or later):
+The majority of KiCad's source code is developed and distributed under the terms
+of the GPLv3 or later. However, It does include some third-party code licensed
+under AGPLv3 or later as well as sections licensed under the BOOST license v1.0,
+the ISC license and the MIT license.
+
+These licenses are compatible, but a combined works as is will be governed under
+the terms of the AGPLv3 (or later). This includes any binary distribution of the
+KiCad EDA suite by the KiCad project or any third party, e.g. Linux distributor.
+
+You are free to use the *sources* under the terms of their respective licenses.
+
+Licensed under AGPLv3 (or later):
+- TTL [https://www.sintef.no/projectweb/geometry-toolkits/ttl/], sources in include/ttl/*
+Licensed under BOOSTv1:
+- libcontext [https://github.com/boostorg/context], sources in common/system/libcontext.cpp
+Licensed under ISC:
+- portions of code in include/geometry/polygon_triangulation.h
+Licensed under MIT:
+- tinyspline_lib in dxflib_qcad/tinyspline_lib
+Licensed under CC-BY-SA-4.0:
+- All the demo files provided in demos/*
+Licensed under GPLv3 (or later):
+- All remaining code not listed above

README.txt

@@ -40,8 +40,8 @@ polygon           - Sourcecode of the polygon library
 potrace           - Sourcecode of the potrace library, used in bitmap2component
 qa                - Testcases using the python interface
 resources         - Resources for freedesktop mime-types for linux
-scripting         - SWIG Python scripting definitions
-scripts           - Helper scripts for various things
+scripting         - SWIG Python scripting definitions and build scripts
+scripts           - Example scripts for distribution with KiCad
 template          - Project and pagelayout templates
 tools             - Other miscellaneous helpers for testing
 utils             - Small utils for kicad, e.g. IDF tools

_clang-format

@@ -7,13 +7,13 @@ AlignOperands: true
 AlignTrailingComments: true
 AllowAllParametersOfDeclarationOnNextLine: true
 AllowShortBlocksOnASingleLine: false
-AllowShortCaseLabelsOnASingleLine: true
+AllowShortCaseLabelsOnASingleLine: false
 AllowShortFunctionsOnASingleLine: false
 AllowShortIfStatementsOnASingleLine: false
 AllowShortLoopsOnASingleLine: false
 AlwaysBreakAfterReturnType: None
 AlwaysBreakBeforeMultilineStrings: true
-AlwaysBreakTemplateDeclarations: false
+AlwaysBreakTemplateDeclarations: true
 BinPackArguments: true
 BinPackParameters: true
 BreakBeforeBinaryOperators: NonAssignment

bitmap2component/CMakeLists.txt

@@ -37,7 +37,7 @@ if( APPLE )
         MACOSX_PACKAGE_LOCATION Resources
         )
     set( MACOSX_BUNDLE_ICON_FILE bitmap2component.icns )
-    set( MACOSX_BUNDLE_GUI_IDENTIFIER org.kicad-pcb.kicad )
+    set( MACOSX_BUNDLE_GUI_IDENTIFIER org.kicad.kicad )
     set( MACOSX_BUNDLE_NAME bitmap2component )
 endif()
 
@@ -55,7 +55,7 @@ target_link_libraries( bitmap2component
 
 if( APPLE )
     set_target_properties( bitmap2component PROPERTIES
-        MACOSX_BUNDLE_INFO_PLIST ${CMAKE_CURRENT_SOURCE_DIR}/Info.plist
+        MACOSX_BUNDLE_INFO_PLIST ${PROJECT_BINARY_DIR}/bitmap2component/Info.plist
         )
 
     # put individual bundle outside of main bundle as a first step

bitmap2component/Info.plist

@@ -1,42 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>CFBundleDocumentTypes</key>
-	<array/>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>English</string>
-	<key>CFBundleExecutable</key>
-	<string>bitmap2component</string>
-	<key>CFBundleGetInfoString</key>
-	<string></string>
-	<key>CFBundleIconFile</key>
-	<string>bitmap2component.icns</string>
-	<key>CFBundleIdentifier</key>
-	<string>org.kicad-pcb.bitmap2component</string>
-	<key>CFBundleInfoDictionaryVersion</key>
-	<string>6.0</string>
-	<key>CFBundleLongVersionString</key>
-	<string></string>
-	<key>CFBundleName</key>
-	<string>Bitmap 2 Component</string>
-	<key>CFBundlePackageType</key>
-	<string>APPL</string>
-	<key>CFBundleShortVersionString</key>
-	<string></string>
-	<key>CFBundleSignature</key>
-	<string>????</string>
-	<key>CFBundleVersion</key>
-	<string></string>
-	<key>CSResourcesFileMapped</key>
-	<true/>
-	<key>LSRequiresCarbon</key>
-	<true/>
-	<key>NSRequiresAquaSystemAppearance</key>
-	<true/>
-	<key>NSHumanReadableCopyright</key>
-	<string></string>
-        <key>NSHighResolutionCapable</key>
-        <string>True</string>
-</dict>
-</plist>

bitmap2component/bitmap2cmp_gui.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KICAD, a free EDA CAD application.
  *
  * Copyright (C) 1992-2010 jean-pierre.charras
- * Copyright (C) 1992-2017 Kicad Developers, see change_log.txt for contributors.
+ * Copyright (C) 1992-2019 Kicad Developers, see change_log.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -35,6 +35,7 @@
 #include <kiway.h>
 #include <kiface_i.h>
 
+#include <wx/rawbmp.h>
 #include <potracelib.h>
 
 #include "bitmap2component.h"
@@ -91,7 +92,9 @@ public:
 private:
 
     // Event handlers
-    void OnPaint( wxPaintEvent& event ) override;
+    void OnPaintInit( wxPaintEvent& event ) override;
+    void OnPaintGreyscale( wxPaintEvent& event ) override;
+    void OnPaintBW( wxPaintEvent& event ) override;
     void OnLoadFile( wxCommandEvent& event ) override;
     void OnExport( wxCommandEvent& event ) override;
 
@@ -230,30 +233,59 @@ BM2CMP_FRAME::~BM2CMP_FRAME()
 }
 
 
-void BM2CMP_FRAME::OnPaint( wxPaintEvent& event )
+void BM2CMP_FRAME::OnPaintInit( wxPaintEvent& event )
 {
 #ifdef __WXMAC__
     // Otherwise fails due: using wxPaintDC without being in a native paint event
     wxClientDC pict_dc( m_InitialPicturePanel );
-    wxClientDC greyscale_dc( m_GreyscalePicturePanel );
-    wxClientDC nb_dc( m_BNPicturePanel );
 #else
     wxPaintDC pict_dc( m_InitialPicturePanel );
-    wxPaintDC greyscale_dc( m_GreyscalePicturePanel );
-    wxPaintDC nb_dc( m_BNPicturePanel );
 #endif
 
     m_InitialPicturePanel->PrepareDC( pict_dc );
-    m_GreyscalePicturePanel->PrepareDC( greyscale_dc );
-    m_BNPicturePanel->PrepareDC( nb_dc );
 
     // OSX crashes with empty bitmaps (on initial refreshes)
-    if( m_Pict_Bitmap.IsOk() && m_Greyscale_Bitmap.IsOk() && m_BN_Bitmap.IsOk() )
-    {
-        pict_dc.DrawBitmap( m_Pict_Bitmap, 0, 0, false );
-        greyscale_dc.DrawBitmap( m_Greyscale_Bitmap, 0, 0, false );
-        nb_dc.DrawBitmap( m_BN_Bitmap, 0, 0, false );
-    }
+    if( m_Pict_Bitmap.IsOk() )
+        pict_dc.DrawBitmap( m_Pict_Bitmap, 0, 0, !!m_Pict_Bitmap.GetMask() );
+
+    event.Skip();
+}
+
+
+void BM2CMP_FRAME::OnPaintGreyscale( wxPaintEvent& event )
+{
+#ifdef __WXMAC__
+    // Otherwise fails due: using wxPaintDC without being in a native paint event
+    wxClientDC greyscale_dc( m_GreyscalePicturePanel );
+#else
+    wxPaintDC greyscale_dc( m_GreyscalePicturePanel );
+#endif
+
+    m_GreyscalePicturePanel->PrepareDC( greyscale_dc );
+
+    // OSX crashes with empty bitmaps (on initial refreshes)
+    if( m_Greyscale_Bitmap.IsOk() )
+        greyscale_dc.DrawBitmap( m_Greyscale_Bitmap, 0, 0, !!m_Greyscale_Bitmap.GetMask() );
+
+    event.Skip();
+}
+
+
+void BM2CMP_FRAME::OnPaintBW( wxPaintEvent& event )
+{
+#ifdef __WXMAC__
+    // Otherwise fails due: using wxPaintDC without being in a native paint event
+    wxClientDC nb_dc( m_BNPicturePanel );
+#else
+    wxPaintDC nb_dc( m_BNPicturePanel );
+#endif
+
+    m_BNPicturePanel->PrepareDC( nb_dc );
+
+    if( m_BN_Bitmap.IsOk() )
+        nb_dc.DrawBitmap( m_BN_Bitmap, 0, 0, !!m_BN_Bitmap.GetMask() );
+
+    event.Skip();
 }
 
 
@@ -288,8 +320,7 @@ void BM2CMP_FRAME::OnLoadFile( wxCommandEvent& event )
 
 bool BM2CMP_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
 {
-    // Prj().MaybeLoadProjectSettings();
-
+    m_Pict_Image.Destroy();
     m_BitmapFileName = aFileSet[0];
 
     if( !m_Pict_Image.LoadFile( m_BitmapFileName ) )
@@ -336,11 +367,26 @@ bool BM2CMP_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int
     m_Greyscale_Image.Destroy();
     m_Greyscale_Image = m_Pict_Image.ConvertToGreyscale( );
 
+    if( m_Pict_Bitmap.GetMask() )
+    {
+        for( int x = 0; x < m_Pict_Bitmap.GetWidth(); x++ )
+        {
+            for( int y = 0; y < m_Pict_Bitmap.GetHeight(); y++ )
+            {
+                if( m_Pict_Image.GetRed( x, y ) == m_Pict_Image.GetMaskRed() &&
+                    m_Pict_Image.GetGreen( x, y ) == m_Pict_Image.GetMaskGreen() &&
+                    m_Pict_Image.GetBlue( x, y ) == m_Pict_Image.GetMaskBlue() )
+                {
+                    m_Greyscale_Image.SetRGB( x, y, 255, 255, 255 );
+                }
+            }
+        }
+    }
+
     if( m_Negative )
         NegateGreyscaleImage( );
 
     m_Greyscale_Bitmap = wxBitmap( m_Greyscale_Image );
-
     m_NB_Image  = m_Greyscale_Image;
     Binarize( (double) m_sliderThreshold->GetValue()/m_sliderThreshold->GetMax() );
 
@@ -391,26 +437,30 @@ void BM2CMP_FRAME::OnResolutionChange( wxCommandEvent& event )
 
 void BM2CMP_FRAME::Binarize( double aThreshold )
 {
-    unsigned int  pixin;
-    unsigned char pixout;
     int           h = m_Greyscale_Image.GetHeight();
     int           w = m_Greyscale_Image.GetWidth();
-    unsigned int  threshold = (int)(aThreshold * 256);
+    unsigned char threshold = aThreshold * 255;
+    unsigned char alpha_thresh = 0.7 * threshold;
 
     for( int y = 0; y < h; y++ )
         for( int x = 0; x < w; x++ )
         {
-            pixin   = m_Greyscale_Image.GetGreen( x, y );
+            unsigned char pixout;
+            auto pixin   = m_Greyscale_Image.GetGreen( x, y );
+            auto alpha   = m_Greyscale_Image.HasAlpha() ?
+                    m_Greyscale_Image.GetAlpha( x, y ) : wxALPHA_OPAQUE;
 
-            if( pixin < threshold )
+            if( pixin < threshold && alpha > alpha_thresh )
                 pixout = 0;
             else
                 pixout = 255;
 
             m_NB_Image.SetRGB( x, y, pixout, pixout, pixout );
+
         }
 
     m_BN_Bitmap = wxBitmap( m_NB_Image );
+
 }
 
 
@@ -435,6 +485,7 @@ void BM2CMP_FRAME::OnNegativeClicked( wxCommandEvent&  )
     if( m_checkNegative->GetValue() != m_Negative )
     {
         NegateGreyscaleImage();
+
         m_Greyscale_Bitmap = wxBitmap( m_Greyscale_Image );
         Binarize( (double)m_sliderThreshold->GetValue()/m_sliderThreshold->GetMax() );
         m_Negative = m_checkNegative->GetValue();
@@ -647,8 +698,8 @@ void BM2CMP_FRAME::ExportFile( FILE* aOutfile, OUTPUT_FMT_ID aFormat )
     {
         for( int x = 0; x < w; x++ )
         {
-            unsigned char pix = m_NB_Image.GetGreen( x, y );
-            BM_PUT( potrace_bitmap, x, y, pix ? 1 : 0 );
+            auto pix = m_NB_Image.GetGreen( x, y );
+            BM_PUT( potrace_bitmap, x, y, pix ? 0 : 1 );
         }
     }
 

bitmap2component/bitmap2cmp_gui_base.cpp

@@ -1,5 +1,5 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jun  5 2018)
+// C++ code generated with wxFormBuilder (version 3.9.0 Nov  1 2020)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
@@ -12,167 +12,168 @@
 BM2CMP_FRAME_BASE::BM2CMP_FRAME_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : KIWAY_PLAYER( parent, id, title, pos, size, style )
 {
 	this->SetSizeHints( wxDefaultSize, wxDefaultSize );
-	
+
 	wxBoxSizer* bMainSizer;
 	bMainSizer = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	m_Notebook = new wxNotebook( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, 0 );
 	m_InitialPicturePanel = new wxScrolledWindow( m_Notebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL|wxVSCROLL );
 	m_InitialPicturePanel->SetScrollRate( 5, 5 );
 	m_InitialPicturePanel->SetMinSize( wxSize( 400,300 ) );
-	
+
 	m_Notebook->AddPage( m_InitialPicturePanel, _("Original Picture"), true );
 	m_GreyscalePicturePanel = new wxScrolledWindow( m_Notebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL|wxVSCROLL );
 	m_GreyscalePicturePanel->SetScrollRate( 5, 5 );
 	m_GreyscalePicturePanel->SetMinSize( wxSize( 400,300 ) );
-	
+
 	m_Notebook->AddPage( m_GreyscalePicturePanel, _("Greyscale Picture"), false );
 	m_BNPicturePanel = new wxScrolledWindow( m_Notebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL|wxVSCROLL );
 	m_BNPicturePanel->SetScrollRate( 5, 5 );
 	m_Notebook->AddPage( m_BNPicturePanel, _("Black&&White Picture"), false );
-	
+
 	bMainSizer->Add( m_Notebook, 1, wxEXPAND, 5 );
-	
+
 	m_panelRight = new wxPanel( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
 	wxBoxSizer* brightSizer;
 	brightSizer = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxStaticBoxSizer* sbSizerInfo;
-	sbSizerInfo = new wxStaticBoxSizer( new wxStaticBox( m_panelRight, wxID_ANY, _("Bitmap Info:") ), wxVERTICAL );
-	
+	sbSizerInfo = new wxStaticBoxSizer( new wxStaticBox( m_panelRight, wxID_ANY, _("Bitmap Info") ), wxVERTICAL );
+
 	wxFlexGridSizer* fgSizerInfo;
 	fgSizerInfo = new wxFlexGridSizer( 0, 4, 0, 0 );
 	fgSizerInfo->AddGrowableCol( 1 );
 	fgSizerInfo->AddGrowableCol( 2 );
 	fgSizerInfo->SetFlexibleDirection( wxBOTH );
 	fgSizerInfo->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
+
 	m_staticTextSize = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("Size:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextSize->Wrap( -1 );
 	fgSizerInfo->Add( m_staticTextSize, 0, wxALIGN_RIGHT|wxALL|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_SizeXValue = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("0000"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SizeXValue->Wrap( -1 );
 	fgSizerInfo->Add( m_SizeXValue, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_SizeYValue = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("0000"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SizeYValue->Wrap( -1 );
 	fgSizerInfo->Add( m_SizeYValue, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_SizePixUnits = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("pixels"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SizePixUnits->Wrap( -1 );
 	fgSizerInfo->Add( m_SizePixUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_staticTextSize1 = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("Size:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextSize1->Wrap( -1 );
 	fgSizerInfo->Add( m_staticTextSize1, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxALIGN_RIGHT, 5 );
-	
+
 	m_SizeXValue_mm = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("0000"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SizeXValue_mm->Wrap( -1 );
 	fgSizerInfo->Add( m_SizeXValue_mm, 0, wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_SizeYValue_mm = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("0000"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SizeYValue_mm->Wrap( -1 );
 	fgSizerInfo->Add( m_SizeYValue_mm, 0, wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_Size_mmxUnits = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_Size_mmxUnits->Wrap( -1 );
 	fgSizerInfo->Add( m_Size_mmxUnits, 0, wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_staticTextBPP = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("BPP:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextBPP->Wrap( -1 );
 	fgSizerInfo->Add( m_staticTextBPP, 0, wxALIGN_RIGHT|wxBOTTOM|wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_BPPValue = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("0000"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_BPPValue->Wrap( -1 );
 	fgSizerInfo->Add( m_BPPValue, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_BPPunits = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("bits"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_BPPunits->Wrap( -1 );
 	fgSizerInfo->Add( m_BPPunits, 0, wxBOTTOM|wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
-	
-	
+
+
 	fgSizerInfo->Add( 0, 0, 1, wxEXPAND, 5 );
-	
+
 	m_staticTextBPI = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("Resolution:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextBPI->Wrap( -1 );
 	fgSizerInfo->Add( m_staticTextBPI, 0, wxALIGN_RIGHT|wxBOTTOM|wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_DPIValueX = new wxTextCtrl( sbSizerInfo->GetStaticBox(), wxID_ANY, _("300"), wxDefaultPosition, wxDefaultSize, 0 );
-	m_DPIValueX->SetMinSize( wxSize( 40,-1 ) );
-	
+	m_DPIValueX->SetMinSize( wxSize( 45,-1 ) );
+
 	fgSizerInfo->Add( m_DPIValueX, 0, wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_DPIValueY = new wxTextCtrl( sbSizerInfo->GetStaticBox(), wxID_ANY, _("300"), wxDefaultPosition, wxDefaultSize, 0 );
-	m_DPIValueY->SetMinSize( wxSize( 40,-1 ) );
-	
+	m_DPIValueY->SetMinSize( wxSize( 45,-1 ) );
+
 	fgSizerInfo->Add( m_DPIValueY, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxRIGHT, 5 );
-	
+
 	m_DPI_Units = new wxStaticText( sbSizerInfo->GetStaticBox(), wxID_ANY, _("DPI"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_DPI_Units->Wrap( -1 );
 	fgSizerInfo->Add( m_DPI_Units, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxRIGHT, 5 );
-	
-	
+
+
 	sbSizerInfo->Add( fgSizerInfo, 0, wxEXPAND|wxBOTTOM, 5 );
-	
-	
+
+
 	brightSizer->Add( sbSizerInfo, 0, wxEXPAND|wxALL, 5 );
-	
+
 	m_buttonLoad = new wxButton( m_panelRight, wxID_ANY, _("Load Bitmap"), wxDefaultPosition, wxDefaultSize, 0 );
 	brightSizer->Add( m_buttonLoad, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_buttonExport = new wxButton( m_panelRight, wxID_ANY, _("Export"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_buttonExport->SetToolTip( _("Create a library file for Eeschema\nThis library contains only one component: logo") );
-	
+
 	brightSizer->Add( m_buttonExport, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	wxString m_radioBoxFormatChoices[] = { _("Eeschema (.lib file)"), _("Pcbnew (.kicad_mod file)"), _("Postscript (.ps file)"), _("Logo for title block (.kicad_wks file)") };
 	int m_radioBoxFormatNChoices = sizeof( m_radioBoxFormatChoices ) / sizeof( wxString );
-	m_radioBoxFormat = new wxRadioBox( m_panelRight, wxID_ANY, _("Format:"), wxDefaultPosition, wxDefaultSize, m_radioBoxFormatNChoices, m_radioBoxFormatChoices, 1, wxRA_SPECIFY_COLS );
+	m_radioBoxFormat = new wxRadioBox( m_panelRight, wxID_ANY, _("Format"), wxDefaultPosition, wxDefaultSize, m_radioBoxFormatNChoices, m_radioBoxFormatChoices, 1, wxRA_SPECIFY_COLS );
 	m_radioBoxFormat->SetSelection( 1 );
 	brightSizer->Add( m_radioBoxFormat, 0, wxEXPAND|wxALL, 5 );
-	
+
 	wxStaticBoxSizer* sbSizer2;
-	sbSizer2 = new wxStaticBoxSizer( new wxStaticBox( m_panelRight, wxID_ANY, _("Image Options:") ), wxVERTICAL );
-	
+	sbSizer2 = new wxStaticBoxSizer( new wxStaticBox( m_panelRight, wxID_ANY, _("Image Options") ), wxVERTICAL );
+
 	m_ThresholdText = new wxStaticText( sbSizer2->GetStaticBox(), wxID_ANY, _("Black / White Threshold:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_ThresholdText->Wrap( -1 );
 	sbSizer2->Add( m_ThresholdText, 0, 0, 5 );
-	
+
 	m_sliderThreshold = new wxSlider( sbSizer2->GetStaticBox(), wxID_ANY, 50, 0, 100, wxDefaultPosition, wxDefaultSize, wxSL_HORIZONTAL|wxSL_LABELS );
 	m_sliderThreshold->SetToolTip( _("Adjust the level to convert the greyscale picture to a black and white picture.") );
-	
+
 	sbSizer2->Add( m_sliderThreshold, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_checkNegative = new wxCheckBox( sbSizer2->GetStaticBox(), wxID_ANY, _("Negative"), wxDefaultPosition, wxDefaultSize, 0 );
 	sbSizer2->Add( m_checkNegative, 0, wxBOTTOM|wxTOP, 10 );
-	
-	
+
+
 	brightSizer->Add( sbSizer2, 0, wxALL|wxEXPAND, 5 );
-	
+
 	wxString m_radio_PCBLayerChoices[] = { _("Front silk screen"), _("Front solder mask"), _("User layer Eco1"), _("User layer Eco2") };
 	int m_radio_PCBLayerNChoices = sizeof( m_radio_PCBLayerChoices ) / sizeof( wxString );
-	m_radio_PCBLayer = new wxRadioBox( m_panelRight, wxID_ANY, _("Board Layer for Outline:"), wxDefaultPosition, wxDefaultSize, m_radio_PCBLayerNChoices, m_radio_PCBLayerChoices, 1, wxRA_SPECIFY_COLS );
+	m_radio_PCBLayer = new wxRadioBox( m_panelRight, wxID_ANY, _("Board Layer for Outline"), wxDefaultPosition, wxDefaultSize, m_radio_PCBLayerNChoices, m_radio_PCBLayerChoices, 1, wxRA_SPECIFY_COLS );
 	m_radio_PCBLayer->SetSelection( 3 );
 	m_radio_PCBLayer->SetToolTip( _("Choose the board layer to place the outline.\nThe 2 invisible fields reference and value are always placed on the silk screen layer.") );
-	
+
 	brightSizer->Add( m_radio_PCBLayer, 0, wxALL|wxEXPAND, 5 );
-	
-	
+
+
 	m_panelRight->SetSizer( brightSizer );
 	m_panelRight->Layout();
 	brightSizer->Fit( m_panelRight );
 	bMainSizer->Add( m_panelRight, 0, wxEXPAND, 0 );
-	
-	
+
+
 	this->SetSizer( bMainSizer );
 	this->Layout();
-	m_statusBar = this->CreateStatusBar( 1, wxST_SIZEGRIP, wxID_ANY );
-	
+	bMainSizer->Fit( this );
+	m_statusBar = this->CreateStatusBar( 1, wxSTB_SIZEGRIP, wxID_ANY );
+
 	// Connect Events
-	m_InitialPicturePanel->Connect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaint ), NULL, this );
-	m_GreyscalePicturePanel->Connect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaint ), NULL, this );
-	m_BNPicturePanel->Connect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaint ), NULL, this );
+	m_InitialPicturePanel->Connect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaintInit ), NULL, this );
+	m_GreyscalePicturePanel->Connect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaintGreyscale ), NULL, this );
+	m_BNPicturePanel->Connect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaintBW ), NULL, this );
 	m_DPIValueX->Connect( wxEVT_LEAVE_WINDOW, wxMouseEventHandler( BM2CMP_FRAME_BASE::UpdatePPITextValueX ), NULL, this );
 	m_DPIValueX->Connect( wxEVT_COMMAND_TEXT_UPDATED, wxCommandEventHandler( BM2CMP_FRAME_BASE::OnResolutionChange ), NULL, this );
 	m_DPIValueY->Connect( wxEVT_LEAVE_WINDOW, wxMouseEventHandler( BM2CMP_FRAME_BASE::UpdatePPITextValueY ), NULL, this );
@@ -187,9 +188,9 @@ BM2CMP_FRAME_BASE::BM2CMP_FRAME_BASE( wxWindow* parent, wxWindowID id, const wxS
 BM2CMP_FRAME_BASE::~BM2CMP_FRAME_BASE()
 {
 	// Disconnect Events
-	m_InitialPicturePanel->Disconnect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaint ), NULL, this );
-	m_GreyscalePicturePanel->Disconnect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaint ), NULL, this );
-	m_BNPicturePanel->Disconnect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaint ), NULL, this );
+	m_InitialPicturePanel->Disconnect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaintInit ), NULL, this );
+	m_GreyscalePicturePanel->Disconnect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaintGreyscale ), NULL, this );
+	m_BNPicturePanel->Disconnect( wxEVT_PAINT, wxPaintEventHandler( BM2CMP_FRAME_BASE::OnPaintBW ), NULL, this );
 	m_DPIValueX->Disconnect( wxEVT_LEAVE_WINDOW, wxMouseEventHandler( BM2CMP_FRAME_BASE::UpdatePPITextValueX ), NULL, this );
 	m_DPIValueX->Disconnect( wxEVT_COMMAND_TEXT_UPDATED, wxCommandEventHandler( BM2CMP_FRAME_BASE::OnResolutionChange ), NULL, this );
 	m_DPIValueY->Disconnect( wxEVT_LEAVE_WINDOW, wxMouseEventHandler( BM2CMP_FRAME_BASE::UpdatePPITextValueY ), NULL, this );
@@ -199,5 +200,5 @@ BM2CMP_FRAME_BASE::~BM2CMP_FRAME_BASE()
 	m_radioBoxFormat->Disconnect( wxEVT_COMMAND_RADIOBOX_SELECTED, wxCommandEventHandler( BM2CMP_FRAME_BASE::OnFormatChange ), NULL, this );
 	m_sliderThreshold->Disconnect( wxEVT_SCROLL_THUMBTRACK, wxScrollEventHandler( BM2CMP_FRAME_BASE::OnThresholdChange ), NULL, this );
 	m_checkNegative->Disconnect( wxEVT_COMMAND_CHECKBOX_CLICKED, wxCommandEventHandler( BM2CMP_FRAME_BASE::OnNegativeClicked ), NULL, this );
-	
+
 }

bitmap2component/bitmap2cmp_gui_base.h

@@ -1,12 +1,11 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jun  5 2018)
+// C++ code generated with wxFormBuilder (version 3.9.0 Nov  1 2020)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
 ///////////////////////////////////////////////////////////////////////////
 
-#ifndef __BITMAP2CMP_GUI_BASE_H__
-#define __BITMAP2CMP_GUI_BASE_H__
+#pragma once
 
 #include <wx/artprov.h>
 #include <wx/xrc/xmlres.h>
@@ -43,7 +42,7 @@
 class BM2CMP_FRAME_BASE : public KIWAY_PLAYER
 {
 	private:
-	
+
 	protected:
 		wxNotebook* m_Notebook;
 		wxScrolledWindow* m_InitialPicturePanel;
@@ -73,9 +72,11 @@ class BM2CMP_FRAME_BASE : public KIWAY_PLAYER
 		wxCheckBox* m_checkNegative;
 		wxRadioBox* m_radio_PCBLayer;
 		wxStatusBar* m_statusBar;
-		
+
 		// Virtual event handlers, overide them in your derived class
-		virtual void OnPaint( wxPaintEvent& event ) { event.Skip(); }
+		virtual void OnPaintInit( wxPaintEvent& event ) { event.Skip(); }
+		virtual void OnPaintGreyscale( wxPaintEvent& event ) { event.Skip(); }
+		virtual void OnPaintBW( wxPaintEvent& event ) { event.Skip(); }
 		virtual void UpdatePPITextValueX( wxMouseEvent& event ) { event.Skip(); }
 		virtual void OnResolutionChange( wxCommandEvent& event ) { event.Skip(); }
 		virtual void UpdatePPITextValueY( wxMouseEvent& event ) { event.Skip(); }
@@ -84,14 +85,13 @@ class BM2CMP_FRAME_BASE : public KIWAY_PLAYER
 		virtual void OnFormatChange( wxCommandEvent& event ) { event.Skip(); }
 		virtual void OnThresholdChange( wxScrollEvent& event ) { event.Skip(); }
 		virtual void OnNegativeClicked( wxCommandEvent& event ) { event.Skip(); }
-		
-	
+
+
 	public:
-		
-		BM2CMP_FRAME_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Bitmap to Component Converter"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 733,634 ), long style = wxDEFAULT_FRAME_STYLE|wxRESIZE_BORDER|wxTAB_TRAVERSAL );
-		
+
+		BM2CMP_FRAME_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Bitmap to Component Converter"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_FRAME_STYLE|wxRESIZE_BORDER|wxTAB_TRAVERSAL );
+
 		~BM2CMP_FRAME_BASE();
-	
+
 };
 
-#endif //__BITMAP2CMP_GUI_BASE_H__

bitmap2component/bitmap2component.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KICAD, a free EDA CAD application.
  *
  * Copyright (C) 1992-2013 jean-pierre.charras
- * Copyright (C) 1992-2013 Kicad Developers, see change_log.txt for contributors.
+ * Copyright (C) 1992-2019 Kicad Developers, see change_log.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -434,6 +434,8 @@ void BITMAPCONV_INFO::CreateOutputFile( BMP2CMP_MOD_LAYER aModLayer )
      * Bezier curves are approximated by a polyline
      */
     potrace_path_t* paths = m_Paths;    // the list of paths
+    if(!m_Paths)
+        printf("NULL Paths!\n");
     while( paths != NULL )
     {
         int cnt  = paths->curve.n;
@@ -488,9 +490,9 @@ void BITMAPCONV_INFO::CreateOutputFile( BMP2CMP_MOD_LAYER aModLayer )
         if( paths->next == NULL || paths->next->sign == '+' )
         {
             // Substract holes to main polygon:
-            polyset_areas.Simplify( SHAPE_POLY_SET::PM_FAST );
-            polyset_holes.Simplify( SHAPE_POLY_SET::PM_FAST );
-            polyset_areas.BooleanSubtract( polyset_holes, SHAPE_POLY_SET::PM_FAST );
+            polyset_areas.Simplify( SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
+            polyset_holes.Simplify( SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
+            polyset_areas.BooleanSubtract( polyset_holes, SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
             polyset_areas.Fracture( SHAPE_POLY_SET::PM_STRICTLY_SIMPLE );
 
             // Output current resulting polygon(s)

bitmaps_png/cpp_16/folder.cpp

@@ -8,13 +8,19 @@
 static const unsigned char png[] = {
  0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x00, 0x00, 0x0d, 0x49, 0x48, 0x44, 0x52,
  0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x10, 0x08, 0x06, 0x00, 0x00, 0x00, 0x1f, 0xf3, 0xff,
- 0x61, 0x00, 0x00, 0x00, 0x50, 0x49, 0x44, 0x41, 0x54, 0x38, 0xcb, 0x63, 0x60, 0x18, 0x2c, 0xa0,
- 0x0d, 0x88, 0x7f, 0x02, 0xf1, 0x7f, 0x20, 0xfe, 0x07, 0xc4, 0x07, 0x80, 0x98, 0x97, 0x14, 0x03,
- 0x40, 0x9a, 0x85, 0xa0, 0x6c, 0x26, 0x20, 0x5e, 0x04, 0x35, 0x94, 0x68, 0xf0, 0x9f, 0x44, 0x0c,
- 0xb2, 0xb0, 0x05, 0xdd, 0x00, 0x52, 0x00, 0xc8, 0xb5, 0x3f, 0x28, 0x31, 0x00, 0x43, 0xcf, 0xa8,
- 0x01, 0x54, 0x30, 0x00, 0x39, 0x21, 0x91, 0x15, 0x8d, 0x2d, 0x48, 0x49, 0x99, 0xd8, 0x84, 0xd4,
- 0x3c, 0x38, 0x72, 0x21, 0x00, 0xe7, 0xb0, 0x30, 0xf1, 0x6b, 0x61, 0x37, 0x2c, 0x00, 0x00, 0x00,
- 0x00, 0x49, 0x45, 0x4e, 0x44, 0xae, 0x42, 0x60, 0x82,
+ 0x61, 0x00, 0x00, 0x00, 0x04, 0x73, 0x42, 0x49, 0x54, 0x08, 0x08, 0x08, 0x08, 0x7c, 0x08, 0x64,
+ 0x88, 0x00, 0x00, 0x00, 0x09, 0x70, 0x48, 0x59, 0x73, 0x00, 0x00, 0x0e, 0xc4, 0x00, 0x00, 0x0e,
+ 0xc4, 0x01, 0x95, 0x2b, 0x0e, 0x1b, 0x00, 0x00, 0x00, 0x19, 0x74, 0x45, 0x58, 0x74, 0x53, 0x6f,
+ 0x66, 0x74, 0x77, 0x61, 0x72, 0x65, 0x00, 0x77, 0x77, 0x77, 0x2e, 0x69, 0x6e, 0x6b, 0x73, 0x63,
+ 0x61, 0x70, 0x65, 0x2e, 0x6f, 0x72, 0x67, 0x9b, 0xee, 0x3c, 0x1a, 0x00, 0x00, 0x00, 0x69, 0x49,
+ 0x44, 0x41, 0x54, 0x38, 0x8d, 0xed, 0xd2, 0x31, 0x0e, 0x82, 0x40, 0x14, 0x06, 0xe1, 0x4f, 0x0e,
+ 0x20, 0x94, 0x9c, 0xd5, 0xda, 0x78, 0x16, 0x1a, 0xe8, 0x0d, 0xd9, 0xc4, 0xd8, 0xca, 0x55, 0xb8,
+ 0x82, 0x6b, 0x01, 0x41, 0xb4, 0xda, 0xd5, 0x86, 0x82, 0x49, 0xfe, 0xe2, 0x15, 0x33, 0xd5, 0x63,
+ 0x2b, 0x5c, 0x10, 0x10, 0x31, 0xe2, 0x81, 0x3a, 0x27, 0x70, 0xc7, 0x71, 0x75, 0x9f, 0xd0, 0xe4,
+ 0x04, 0x62, 0xe6, 0x02, 0xce, 0xdf, 0x81, 0x1c, 0x4a, 0xdc, 0xfe, 0x09, 0x2c, 0x4e, 0xf1, 0x83,
+ 0xf8, 0xc1, 0x1e, 0x78, 0x07, 0x7a, 0xd3, 0x23, 0x1d, 0x12, 0x57, 0xe1, 0xba, 0x0e, 0x0c, 0xe8,
+ 0xf0, 0x4c, 0x5c, 0x3b, 0x3b, 0x1b, 0xe0, 0x05, 0x48, 0x07, 0x25, 0x8f, 0x26, 0x9b, 0x81, 0x8e,
+ 0x00, 0x00, 0x00, 0x00, 0x49, 0x45, 0x4e, 0x44, 0xae, 0x42, 0x60, 0x82,
 };
 
 const BITMAP_OPAQUE folder_xpm[1] = {{ png, sizeof( png ), "folder_xpm" }};

bitmaps_png/cpp_16/pinshape_clock_fall.cpp

@@ -8,14 +8,20 @@
 static const unsigned char png[] = {
  0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x00, 0x00, 0x0d, 0x49, 0x48, 0x44, 0x52,
  0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x10, 0x08, 0x06, 0x00, 0x00, 0x00, 0x1f, 0xf3, 0xff,
- 0x61, 0x00, 0x00, 0x00, 0x60, 0x49, 0x44, 0x41, 0x54, 0x38, 0xcb, 0x63, 0x90, 0x92, 0x92, 0xfa,
- 0x0f, 0xc2, 0x0c, 0xe4, 0x02, 0xaa, 0x19, 0x20, 0x2e, 0x2e, 0x2e, 0x46, 0x91, 0x01, 0xd2, 0xd2,
- 0xd2, 0x97, 0xc9, 0x32, 0x04, 0x66, 0x00, 0x14, 0x5f, 0x97, 0x97, 0x97, 0x97, 0x24, 0xd7, 0x80,
- 0x4b, 0x64, 0x19, 0x02, 0x33, 0x40, 0x42, 0x42, 0x42, 0x94, 0x2c, 0x43, 0x90, 0x63, 0x01, 0x14,
- 0x06, 0xa0, 0xb0, 0x40, 0xf3, 0x16, 0x5e, 0x4c, 0x3d, 0x03, 0xd0, 0xbd, 0x20, 0x2a, 0x2a, 0x2a,
- 0x41, 0x76, 0x20, 0x12, 0xad, 0x19, 0x5b, 0x34, 0x92, 0xa4, 0x99, 0xaa, 0x09, 0x89, 0xe2, 0xa4,
- 0x3c, 0x60, 0xb9, 0x11, 0x00, 0xd8, 0xbd, 0x63, 0x3e, 0x86, 0xe5, 0x97, 0x0f, 0x00, 0x00, 0x00,
- 0x00, 0x49, 0x45, 0x4e, 0x44, 0xae, 0x42, 0x60, 0x82,
+ 0x61, 0x00, 0x00, 0x00, 0xb9, 0x49, 0x44, 0x41, 0x54, 0x38, 0xcb, 0x63, 0x60, 0x40, 0x03, 0x52,
+ 0x52, 0x52, 0xff, 0x41, 0x98, 0x01, 0x0b, 0x10, 0x11, 0x11, 0xe1, 0x95, 0x94, 0x94, 0xdc, 0xca,
+ 0x80, 0x0f, 0xe0, 0x32, 0x40, 0x5a, 0x5a, 0x5a, 0x06, 0x28, 0x7e, 0x1e, 0x97, 0xe1, 0x70, 0x1b,
+ 0xb0, 0x19, 0x20, 0x23, 0x23, 0x63, 0x06, 0x14, 0x7b, 0x81, 0xcf, 0x75, 0x20, 0xc0, 0x08, 0xb4,
+ 0x65, 0x2d, 0xba, 0x22, 0xa0, 0x93, 0x83, 0x80, 0xfc, 0xaf, 0x30, 0x71, 0x9c, 0x06, 0x00, 0x35,
+ 0xd7, 0xa0, 0x2b, 0x02, 0xd2, 0x65, 0x40, 0xfc, 0x17, 0x2a, 0x36, 0x0b, 0xa7, 0x01, 0x40, 0x41,
+ 0x37, 0x20, 0xfe, 0x83, 0xa4, 0x18, 0x84, 0xa7, 0x42, 0xe9, 0x7f, 0x40, 0xdc, 0x80, 0x33, 0x7c,
+ 0x80, 0xfe, 0x53, 0x05, 0x0a, 0xbe, 0x07, 0x49, 0x00, 0x9d, 0x5b, 0x85, 0xec, 0x0a, 0x20, 0xfe,
+ 0x0e, 0xc4, 0x11, 0x78, 0x03, 0x18, 0x28, 0x70, 0x05, 0x24, 0x08, 0xf2, 0x3f, 0x28, 0x1c, 0xd0,
+ 0x0c, 0x20, 0x88, 0x29, 0x37, 0x40, 0x5c, 0x5c, 0x5c, 0x11, 0xc8, 0x78, 0x03, 0x35, 0xa4, 0x9a,
+ 0x50, 0x54, 0xe1, 0x4a, 0x3c, 0xae, 0xe8, 0x81, 0xc8, 0x40, 0x2a, 0x40, 0xb6, 0x9d, 0x2c, 0x03,
+ 0x70, 0x25, 0x24, 0x92, 0x00, 0xae, 0xa4, 0x4c, 0x6a, 0x78, 0xd0, 0xd7, 0x00, 0x00, 0xe0, 0x1c,
+ 0x80, 0xeb, 0x37, 0x41, 0x6c, 0xd9, 0x00, 0x00, 0x00, 0x00, 0x49, 0x45, 0x4e, 0x44, 0xae, 0x42,
+ 0x60, 0x82,
 };
 
 const BITMAP_OPAQUE pinshape_clock_fall_xpm[1] = {{ png, sizeof( png ), "pinshape_clock_fall_xpm" }};

bitmaps_png/cpp_26/lang_sl.cpp

@@ -7,30 +7,23 @@
 
 static const unsigned char png[] = {
  0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x00, 0x00, 0x0d, 0x49, 0x48, 0x44, 0x52,
- 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x1a, 0x08, 0x06, 0x00, 0x00, 0x00, 0xa9, 0x4a, 0x4c,
- 0xce, 0x00, 0x00, 0x01, 0x4b, 0x49, 0x44, 0x41, 0x54, 0x48, 0xc7, 0xed, 0xd5, 0xbf, 0x4b, 0x02,
- 0x61, 0x00, 0x87, 0xf1, 0x77, 0x51, 0x9c, 0x0c, 0x91, 0xa0, 0x25, 0x30, 0xc2, 0xa0, 0x6c, 0x15,
- 0x22, 0xa4, 0xa8, 0x21, 0xa7, 0xa2, 0x21, 0xb2, 0x74, 0x09, 0x49, 0x73, 0x13, 0x13, 0xd4, 0x6a,
- 0x13, 0x5c, 0x0c, 0x44, 0xa4, 0x1f, 0xc4, 0x21, 0x35, 0xa4, 0x21, 0x18, 0x05, 0x81, 0x24, 0x38,
- 0x35, 0x34, 0x49, 0x4b, 0xfd, 0x07, 0x81, 0xe0, 0x12, 0xb7, 0x1c, 0x0d, 0x05, 0x4f, 0xc3, 0x91,
- 0x60, 0x5a, 0x17, 0x62, 0x11, 0xe1, 0xc1, 0x03, 0x77, 0xf0, 0x85, 0x0f, 0xef, 0xbb, 0x9c, 0xa8,
- 0xd5, 0x6a, 0xfc, 0x46, 0xa2, 0x07, 0xfd, 0x7d, 0x48, 0x96, 0x65, 0x7e, 0xfa, 0x51, 0x14, 0xa5,
- 0x07, 0x75, 0x1b, 0xaa, 0xd7, 0xc1, 0xef, 0x57, 0x8b, 0xc7, 0x21, 0x12, 0x51, 0xdf, 0xc3, 0xe1,
- 0xce, 0xa1, 0xeb, 0xca, 0x03, 0xa9, 0x83, 0xdb, 0xa6, 0xaa, 0xa7, 0x65, 0x10, 0x02, 0xec, 0x76,
- 0xc8, 0x64, 0x20, 0x10, 0x00, 0xab, 0x15, 0x8c, 0x46, 0xce, 0xce, 0xef, 0x5b, 0xf6, 0x5a, 0xe5,
- 0x8b, 0x77, 0x88, 0xf4, 0xe1, 0x0d, 0x7d, 0x43, 0xbb, 0x4d, 0x1d, 0x87, 0x24, 0x15, 0x72, 0xb9,
- 0x20, 0x97, 0x83, 0x44, 0x02, 0x1c, 0x0e, 0xd0, 0xeb, 0x99, 0x77, 0x17, 0x5a, 0xf6, 0x5a, 0xad,
- 0x07, 0x2f, 0xda, 0x43, 0x85, 0xf0, 0x11, 0xe8, 0x74, 0x50, 0x2a, 0xa9, 0x65, 0xb3, 0x20, 0xa9,
- 0xf8, 0xaa, 0xb7, 0xd8, 0x3d, 0x68, 0x7f, 0xf3, 0x44, 0x3d, 0x91, 0x10, 0x3c, 0x7b, 0x7d, 0xbc,
- 0x8e, 0xda, 0xd4, 0x6f, 0x93, 0x09, 0xe7, 0x52, 0xbe, 0x7b, 0xd0, 0xc4, 0x5c, 0x96, 0xaa, 0x6d,
- 0x86, 0x84, 0xc9, 0xc9, 0xd8, 0xe0, 0x0e, 0x8b, 0x03, 0x3e, 0x62, 0xe6, 0x05, 0x1e, 0xdd, 0x1b,
- 0xf4, 0x8f, 0xa4, 0x3a, 0x83, 0xca, 0xd2, 0x15, 0xe9, 0xd9, 0x50, 0x4b, 0x95, 0xe8, 0x1e, 0x16,
- 0x4b, 0xbc, 0x31, 0x9e, 0x1c, 0xde, 0xe6, 0x32, 0x98, 0x6e, 0xbb, 0xd5, 0x2a, 0xbf, 0x25, 0x21,
- 0xe4, 0x64, 0xb2, 0x71, 0x4d, 0x1f, 0x7b, 0x5a, 0x59, 0x63, 0x79, 0x3c, 0x4a, 0xcc, 0x11, 0xe5,
- 0x65, 0x6a, 0xfa, 0xd3, 0x9d, 0x56, 0x8a, 0xc7, 0xf3, 0x35, 0x84, 0x10, 0x60, 0x36, 0x83, 0xc1,
- 0xd0, 0x31, 0xf2, 0x7d, 0xa8, 0x0b, 0xfd, 0x53, 0xa8, 0xf7, 0x2b, 0xef, 0x41, 0xef, 0xbd, 0x01,
- 0xd4, 0x13, 0x20, 0xa3, 0x03, 0x4f, 0x86, 0x07, 0x00, 0x00, 0x00, 0x00, 0x49, 0x45, 0x4e, 0x44,
- 0xae, 0x42, 0x60, 0x82,
+ 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x1a, 0x08, 0x02, 0x00, 0x00, 0x00, 0x26, 0x28, 0xdb,
+ 0x99, 0x00, 0x00, 0x00, 0xdc, 0x49, 0x44, 0x41, 0x54, 0x48, 0xc7, 0x63, 0x78, 0x46, 0x55, 0xc0,
+ 0x30, 0x6a, 0x1c, 0xf9, 0xc6, 0x7d, 0xf8, 0xf0, 0xe1, 0x3f, 0x95, 0xc0, 0xd7, 0xaf, 0x5f, 0x69,
+ 0x6c, 0xdc, 0xdd, 0xbb, 0xdf, 0x96, 0x2e, 0xbe, 0x3d, 0x73, 0xfa, 0x8d, 0xbd, 0x7b, 0xdf, 0xfd,
+ 0xfe, 0xfd, 0x8f, 0x32, 0xe3, 0x7e, 0xff, 0x51, 0x55, 0x38, 0xcc, 0xcb, 0xbd, 0x55, 0x5d, 0x71,
+ 0x11, 0x03, 0xc3, 0xfe, 0xed, 0xf3, 0xaf, 0x50, 0xea, 0x3a, 0x13, 0xdd, 0xa3, 0x2c, 0x2c, 0x07,
+ 0x0c, 0x0d, 0x4f, 0x33, 0x32, 0xee, 0x3f, 0xbe, 0xe6, 0x2a, 0xc9, 0xc6, 0x6d, 0xd9, 0xf2, 0xb0,
+ 0xa3, 0xe3, 0x2e, 0x1c, 0xb9, 0xd9, 0x1f, 0xbf, 0x71, 0xe3, 0xeb, 0x8b, 0x17, 0x3f, 0x6b, 0x6b,
+ 0xef, 0x35, 0xa7, 0xed, 0x47, 0x96, 0x22, 0x88, 0x16, 0x2e, 0xbc, 0xc7, 0xd0, 0xd5, 0x75, 0x0d,
+ 0xe8, 0x2f, 0x38, 0xf2, 0xb5, 0x3d, 0x34, 0x7f, 0xfe, 0x73, 0x20, 0x6a, 0x6a, 0xbc, 0x2f, 0xca,
+ 0xbc, 0x11, 0x59, 0x8a, 0x20, 0x8a, 0x8e, 0x3e, 0x87, 0x6e, 0x9c, 0x08, 0xf3, 0xa6, 0x86, 0x9a,
+ 0xdb, 0x3b, 0x76, 0xbc, 0xb5, 0x50, 0xd8, 0x4c, 0x92, 0x59, 0xd8, 0x8d, 0x03, 0x22, 0x1e, 0xc6,
+ 0xed, 0x32, 0xcc, 0x6b, 0x48, 0x35, 0x0b, 0xa7, 0x71, 0x64, 0x23, 0x90, 0x71, 0x5b, 0x27, 0xef,
+ 0xef, 0x34, 0x6e, 0xa7, 0x0a, 0x5a, 0x98, 0xb7, 0x9a, 0xe1, 0x43, 0x57, 0xd7, 0x7f, 0x06, 0x06,
+ 0xaa, 0xa0, 0xaf, 0xd1, 0xd1, 0xa3, 0xc6, 0x51, 0x60, 0xdc, 0x68, 0x5d, 0x31, 0x58, 0x8c, 0x03,
+ 0x00, 0x7a, 0x13, 0x67, 0x71, 0xe0, 0xcc, 0x56, 0x20, 0x00, 0x00, 0x00, 0x00, 0x49, 0x45, 0x4e,
+ 0x44, 0xae, 0x42, 0x60, 0x82,
 };
 
 const BITMAP_OPAQUE lang_sl_xpm[1] = {{ png, sizeof( png ), "lang_sl_xpm" }};

bitmaps_png/sources/folder.svg

@@ -1,6 +1,160 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" viewBox="0 0 16 16" version="1.1" width="16px" height="16px">
-<g id="surface1">
-<path style=" " d="M 2.5 2 C 1.675781 2 1 2.675781 1 3.5 L 1 12.5 C 1 13.324219 1.675781 14 2.5 14 L 13.5 14 C 14.324219 14 15 13.324219 15 12.5 L 15 5.5 C 15 4.675781 14.324219 4 13.5 4 L 6.796875 4 L 6.144531 2.789063 C 5.882813 2.300781 5.375 2 4.824219 2 Z M 2.5 3 L 4.824219 3 C 5.007813 3 5.175781 3.101563 5.265625 3.261719 L 5.664063 4 L 2 4 L 2 3.5 C 2 3.21875 2.21875 3 2.5 3 Z M 2 5 L 13.5 5 C 13.78125 5 14 5.21875 14 5.5 L 14 12.5 C 14 12.78125 13.78125 13 13.5 13 L 2.5 13 C 2.21875 13 2 12.78125 2 12.5 Z "/>
-</g>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   viewBox="0 0 16 16"
+   version="1.1"
+   width="16px"
+   height="16px"
+   id="svg5"
+   sodipodi:docname="folder.svg"
+   inkscape:version="0.92.2 5c3e80d, 2017-08-06"
+   inkscape:export-filename="/Users/jeff/kicad_dev/kicad/bitmaps_png/sources/folder.png"
+   inkscape:export-xdpi="96"
+   inkscape:export-ydpi="96">
+  <metadata
+     id="metadata11">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs9" />
+  <sodipodi:namedview
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1"
+     objecttolerance="10"
+     gridtolerance="10"
+     guidetolerance="10"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:window-width="1397"
+     inkscape:window-height="797"
+     id="namedview7"
+     showgrid="false"
+     inkscape:measure-start="9.27628,15.1249"
+     inkscape:measure-end="0,0"
+     inkscape:snap-bbox="true"
+     inkscape:zoom="36.5"
+     inkscape:cx="8"
+     inkscape:cy="8"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg5" />
+  <path
+     id="path13"
+     sodipodi:type="arc"
+     sodipodi:cx="-12.503708"
+     sodipodi:cy="2.4962926"
+     sodipodi:rx="0.99629259"
+     sodipodi:ry="0.99629265"
+     sodipodi:start="3.1415927"
+     sodipodi:end="4.712389"
+     d="m -13.5,2.4962925 a 0.99629259,0.99629265 0 0 1 0.996292,-0.9962926"
+     style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     sodipodi:open="true"
+     transform="rotate(-90)" />
+  <path
+     sodipodi:open="true"
+     style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 1.5,3.5 A 0.99629259,0.99629265 0 0 1 2.4962926,2.5037073"
+     sodipodi:end="4.712389"
+     sodipodi:start="3.1415927"
+     sodipodi:ry="0.99629265"
+     sodipodi:rx="0.99629259"
+     sodipodi:cy="3.5"
+     sodipodi:cx="2.4962926"
+     sodipodi:type="arc"
+     id="path829" />
+  <path
+     id="path831"
+     sodipodi:type="arc"
+     sodipodi:cx="4.9250002"
+     sodipodi:cy="3.4981463"
+     sodipodi:rx="0.99629259"
+     sodipodi:ry="0.99629265"
+     sodipodi:start="4.712389"
+     sodipodi:end="5.7595865"
+     d="M 4.9250002,2.5018536 A 0.99629259,0.99629265 0 0 1 5.7878149,2.9999999"
+     style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     sodipodi:open="true"
+     inkscape:transform-center-x="5.7924304"
+     inkscape:transform-center-y="3.5078215" />
+  <path
+     inkscape:transform-center-y="-5.7927146"
+     inkscape:transform-center-x="3.5069628"
+     sodipodi:open="true"
+     style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:0.99990219;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 4.5036585,-13.5 A 0.99634147,0.99604893 0 0 1 5.5,-14.496049"
+     sodipodi:end="4.712389"
+     sodipodi:start="3.1415927"
+     sodipodi:ry="0.99604893"
+     sodipodi:rx="0.99634147"
+     sodipodi:cy="-13.5"
+     sodipodi:cx="5.5"
+     sodipodi:type="arc"
+     id="path833"
+     transform="rotate(90)" />
+  <path
+     transform="scale(-1)"
+     id="path4524"
+     sodipodi:type="arc"
+     sodipodi:cx="-13.5"
+     sodipodi:cy="-12.503707"
+     sodipodi:rx="0.99629259"
+     sodipodi:ry="0.99629265"
+     sodipodi:start="3.1415927"
+     sodipodi:end="4.712389"
+     d="M -14.496293,-12.503707 A 0.99629259,0.99629265 0 0 1 -13.5,-13.5"
+     style="fill:#000000;fill-opacity:0;stroke:#000000;stroke-width:1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     sodipodi:open="true"
+     inkscape:transform-center-x="-5.7924304"
+     inkscape:transform-center-y="-3.507821" />
+  <path
+     style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     d="m 1.4999929,3.4878054 6e-7,9.0246006"
+     id="path4526"
+     inkscape:connector-curvature="0"
+     sodipodi:nodetypes="cc" />
+  <path
+     style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     d="M 1.5340622,4.4945337 13.506938,4.5065188"
+     id="path4528"
+     inkscape:connector-curvature="0"
+     sodipodi:nodetypes="cc" />
+  <path
+     style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     d="m 14.501681,5.501262 v 6.999159"
+     id="path4530"
+     inkscape:connector-curvature="0" />
+  <path
+     style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     d="m 13.506938,13.495164 -11.014087,0"
+     id="path4532"
+     inkscape:connector-curvature="0"
+     sodipodi:nodetypes="cc" />
+  <path
+     style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     d="m 2.492851,2.5050468 2.4329267,-0.00599"
+     id="path4534"
+     inkscape:connector-curvature="0"
+     sodipodi:nodetypes="cc" />
+  <path
+     style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     d="M 5.7878149,2.9999999 6.6762077,4.5330481"
+     id="path4536"
+     inkscape:connector-curvature="0"
+     sodipodi:nodetypes="cc" />
 </svg>

bitmaps_png/sources/lang_sl.svg

@@ -12,7 +12,7 @@
    version="1.1"
    viewBox="-2100 -1470 151.66666 151.66666"
    id="svg2"
-   inkscape:version="0.48.4 r9939"
+   inkscape:version="0.92.4 5da689c313, 2019-01-14"
    sodipodi:docname="lang_sl.svg">
   <metadata
      id="metadata37">
@@ -22,6 +22,7 @@
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title>Flag of Brazil</dc:title>
       </cc:Work>
     </rdf:RDF>
   </metadata>
@@ -34,29 +35,23 @@
      guidetolerance="10"
      inkscape:pageopacity="0"
      inkscape:pageshadow="2"
-     inkscape:window-width="1366"
-     inkscape:window-height="744"
+     inkscape:window-width="1015"
+     inkscape:window-height="938"
      id="namedview35"
      showgrid="false"
-     inkscape:zoom="0.921875"
-     inkscape:cx="-38.508475"
-     inkscape:cy="128"
+     inkscape:zoom="5.6568542"
+     inkscape:cx="5.7280975"
+     inkscape:cy="9.0111021"
      inkscape:window-x="0"
-     inkscape:window-y="24"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" />
+     inkscape:window-y="90"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="g918"
+     showguides="true"
+     inkscape:guide-bbox="true" />
   <title
      id="title4">Flag of Brazil</title>
   <defs
-     id="defs6">
-    <clipPath
-       id="a">
-      <path
-         d="m 171.82,258.25 c -26.762,-12.893 -65.044,-38.479 -65.044,-89.094 0,-50.614 2.42,-73.633 2.42,-73.633 h 125.25 c 0,0 2.422,23.019 2.422,73.633 -0.001,50.616 -38.286,76.201 -65.05,89.094 z"
-         id="path9"
-         inkscape:connector-curvature="0" />
-    </clipPath>
-  </defs>
+     id="defs6" />
   <clipPath
      id="clipPath11">
     <circle
@@ -86,7 +81,7 @@
        y="-540.56"
        x="-116.67"
        id="rect19"
-       style="fill:#0f218b" />
+       style="fill:#0000bf;fill-opacity:1" />
     <rect
        height="252.78"
        width="1225"
@@ -101,30 +96,49 @@
        x="-116.67"
        id="rect23"
        style="fill:#ff0000" />
-    <path
-       d="m 121.41,-423.58 c 0,-111.98 7.1462,-174.77 7.1462,-174.77 h 321.57 c 0,0 7.1486,62.786 7.1486,174.77 0,119.2 -97.529,178.65 -161.74,207.37 l -6.1942,2.7706 -6.1871,-2.7706 c -64.207,-28.717 -161.74,-88.167 -161.74,-207.37 z"
-       id="path25"
-       inkscape:connector-curvature="0"
-       style="fill:#ffffff;fill-rule:evenodd" />
-    <path
-       d="m 289.34,-228.14 c -63.222,-28.283 -153.66,-84.409 -153.66,-195.44 0,-111.031 5.717,-161.52 5.717,-161.52 h 295.89 c 0,0 5.7217,50.495 5.7217,161.52 -0.002,111.03 -90.446,167.16 -153.67,195.44 z"
-       id="path27"
-       inkscape:connector-curvature="0"
-       style="fill:#ff0000" />
-    <path
-       d="m 302.86,-452.69 c 17.118,0.25665 50.522,0.87964 80.262,-8.3622 0,0 -0.78666,9.8824 -0.78666,21.395 0,11.514 0.78666,21.397 0.78666,21.397 -27.281,-8.4762 -60.971,-8.6539 -80.262,-8.4258 v 61.325 h -27.04 v -61.325 c -19.294,-0.22801 -52.979,-0.0506 -80.262,8.4258 0,0 0.78666,-9.8824 0.78666,-21.397 0,-11.512 -0.78666,-21.395 -0.78666,-21.395 29.74,9.2418 63.142,8.6188 80.262,8.3622 v -38.514 c -15.604,-0.12944 -38.089,0.56377 -63.51,8.4631 0,0 0.7867,-9.8824 0.7867,-21.397 0,-11.512 -0.7867,-21.395 -0.7867,-21.395 25.386,7.8862 47.841,8.5903 63.439,8.4631 -0.80085,-24.389 -8.4526,-55.126 -8.4526,-55.126 0,0 15.748,1.1429 22.041,1.1429 6.3028,0 22.046,-1.1429 22.046,-1.1429 0,0 -7.6495,30.74 -8.4526,55.126 15.601,0.1251 38.056,-0.57694 63.442,-8.4631 0,0 -0.7867,9.8823 -0.7867,21.395 0,11.514 0.7867,21.397 0.7867,21.397 -25.424,-7.8993 -47.909,-8.5925 -63.513,-8.4631 v 38.514 z"
-       id="path29"
-       inkscape:connector-curvature="0"
-       style="fill:#ffffff" />
     <g
-       transform="matrix(2.3624,0,0,2.1936,-116.57,-794.65)"
-       clip-path="url(#a)"
-       id="g31">
+       transform="matrix(2.9274818,0,0,2.8240134,133.11513,-26.272245)"
+       id="g918">
       <path
-         d="m 170.64,274.85 -55.454,-49.43 c 0,0 7.089,-22.927 20.927,-22.927 10.996,0 15.009,8.865 15.009,8.865 0,0 7.22,-18.689 20.696,-18.689 13.479,0 20.699,18.689 20.699,18.689 0,0 4.013,-8.865 15.01,-8.865 13.838,0 20.927,22.927 20.927,22.927 l -57.814,49.43 z"
-         id="path33"
          inkscape:connector-curvature="0"
-         style="fill:#0f218b;fill-rule:evenodd" />
+         id="path13"
+         style="fill:#ed1c24;fill-opacity:1"
+         d="m -9.8011001,-221.38606 c -0.8919999,0.39333 -1.7773329,0.80166 -2.6559999,1.22466 l 2.7679999,43.79933 c 0.754,11.94066 5.831999,23.241 14.3419982,31.75066 5.8193329,5.819 12.9433319,10.034 20.6849979,12.358 h 6.67e-4 c 7.741666,-2.32433 14.865998,-6.539 20.684998,-12.358 8.509666,-8.50966 13.587999,-19.81 14.341665,-31.75066 l 2.768333,-43.79933 c -0.879,-0.423 -1.763666,-0.83133 -2.656333,-1.22466 l 6.67e-4,3.3e-4 -2.833333,44.83632 c -0.709,11.28567 -5.507,21.96667 -13.549332,30.009 -5.3,5.30067 -11.746666,9.19133 -18.756332,11.43167 h -10e-4 c -7.009999,-2.24034 -13.455998,-6.131 -18.7559979,-11.43167 -8.0426662,-8.04233 -12.8406652,-18.72333 -13.5493322,-30.009 l -2.833666,-44.83665 h 6.66e-4" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path15"
+         style="fill:#0000bf;fill-opacity:1"
+         d="m 60.477893,-221.38573 c -10.967666,-4.83567 -22.921331,-7.403 -35.139663,-7.403 -12.218666,0 -24.1723311,2.56733 -35.1399971,7.403 l 2.834,44.83632 c 0.708666,11.28567 5.506666,21.96667 13.5493322,30.009 5.3003329,5.30067 11.7463319,9.19133 18.7559979,11.43167 h 0.001 c 7.009666,-2.24034 13.456332,-6.131 18.755665,-11.43167 8.042999,-8.04233 12.840998,-18.72333 13.549332,-30.009" />
+      <polyline
+         transform="matrix(0.3333333,0,0,0.3333333,-12.4571,-228.78873)"
+         points="119.764,62.917 124.434,56.539 116.574,57.394 113.386,50.161 110.197,57.394 102.338,56.539    107.008,62.917 102.338,69.295 110.197,68.44 113.386,75.673 116.574,68.44 124.434,69.295  "
+         id="polyline17"
+         style="fill:#ffdd00;fill-opacity:1" />
+      <polyline
+         transform="matrix(0.3333333,0,0,0.3333333,-12.4571,-228.78873)"
+         points="90,23.232 94.669,16.854 86.811,17.709 83.622,10.476 80.433,17.709 72.575,16.854 77.244,23.232    72.575,29.61 80.433,28.755 83.622,35.988 86.811,28.755 94.669,29.61  "
+         id="polyline19"
+         style="fill:#ffdd00;fill-opacity:1" />
+      <polyline
+         transform="matrix(0.3333333,0,0,0.3333333,-12.4571,-228.78873)"
+         points="149.527,23.232 154.195,16.854 146.338,17.709 143.148,10.476 139.959,17.709 132.102,16.854    136.771,23.232 132.102,29.61 139.959,28.755 143.148,35.988 146.338,28.755 154.195,29.61  "
+         id="polyline21"
+         style="fill:#ffdd00;fill-opacity:1" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path23"
+         style="fill:#ffffff"
+         d="m 53.684893,-170.02074 -14.173665,-18.89799 -5.669333,7.55933 -8.503999,-17.008 -8.503999,17.008 -5.669333,-7.55933 -14.1733321,18.89799 c 0,2.506 0.995667,4.909 2.76766698,6.681 1.77200002,1.77133 4.17499922,2.76767 6.68133222,2.76767 1.673334,0 3.301,-0.444 4.7249999,-1.26634 0.0093,-0.006 -0.01133,0.007 -0.0023,0.001 0.709666,-0.41 1.475333,-0.72934 2.280333,-0.94467 2.420666,-0.64833 4.999666,-0.30933 7.169999,0.94333 1.449,0.83667 3.080666,1.26634 4.725333,1.26634 0.007,0 -0.0087,0 -0.0017,0 1.645,0 3.276333,-0.42967 4.725666,-1.26634 2.17,-1.25266 4.749333,-1.59233 7.17,-0.94333 0.804666,0.21533 1.570333,0.53467 2.279999,0.94467 0.0097,0.005 -0.011,-0.007 -0.002,-0.001 1.424334,0.82234 3.051333,1.26634 4.724667,1.26634 2.506666,0 4.909666,-0.996 6.681666,-2.76767 1.771999,-1.772 2.767666,-4.175 2.767666,-6.681" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path25-4"
+         style="fill:#ffffff"
+         d="m 0.34889888,-159.76041 c 0.650333,1.29234 1.36533322,2.55334 2.14233322,3.778 0,0 -3.33e-4,6.7e-4 0,10e-4 1.994666,0.91733 4.256333,1.11533 6.394666,0.54233 0.805333,-0.21533 1.5706659,-0.535 2.2803329,-0.94467 0.0093,-0.005 -0.01133,0.007 -0.002,0.001 1.424,-0.823 3.051666,-1.26634 4.724999,-1.26634 0.0033,0 -0.0043,0 -10e-4,0 1.644667,-6.6e-4 3.276334,0.429 4.725333,1.26634 2.170333,1.25266 4.749333,1.59166 7.170333,0.94333 0.804667,-0.21533 1.570333,-0.535 2.28,-0.94467 0.0097,-0.005 -0.011,0.007 -0.002,10e-4 1.423666,-0.823 3.051333,-1.26634 4.725333,-1.26634 0.0033,0 -0.0047,0 -0.0013,0 1.644667,-6.6e-4 3.276667,0.429 4.725333,1.26634 2.170667,1.25266 4.749333,1.59166 7.169999,0.94333 0.519667,-0.13867 1.022,-0.32167 1.504,-0.543 v 0 c 0.777333,-1.22533 1.492334,-2.48633 2.142667,-3.778 0,-6.7e-4 0,0 0,0 -0.472,0.17967 -0.929667,0.397 -1.368334,0.65033 -0.009,0.005 0.01167,-0.007 0.0027,-0.001 -0.709666,0.40967 -1.475333,0.72867 -2.280666,0.94467 -2.420667,0.64833 -4.999333,0.30933 -7.17,-0.944 -1.448666,-0.83667 -3.080666,-1.26567 -4.725332,-1.26567 -0.0033,0 0.0047,0 0.0013,0 -1.673667,0 -3.301333,0.444 -4.725333,1.26633 -0.009,0.005 0.01167,-0.007 0.002,-0.001 -0.709667,0.41 -1.475333,0.72933 -2.28,0.94467 -2.420999,0.649 -4.999999,0.31 -7.170332,-0.94334 -1.449,-0.83666 -3.080667,-1.26633 -4.725333,-1.26633 -0.0037,0 0.0043,0 10e-4,0 -1.673333,0 -3.301,0.444 -4.725,1.267 -0.0093,0.005 0.01133,-0.007 0.002,-10e-4 -0.709666,0.40966 -1.4749999,0.72866 -2.2803329,0.94466 -2.420666,0.64834 -4.999666,0.30934 -7.169999,-0.944 -0.4403332,-0.254 -0.89766722,-0.47066 -1.36700022,-0.649 -3.33e-4,0 0,-6.6e-4 0,0" />
+      <path
+         inkscape:connector-curvature="0"
+         id="path27-3"
+         style="fill:#ffffff"
+         d="m 45.737561,-152.50907 c -1.101,1.41066 -2.293,2.76099 -3.572333,4.03966 -4.78,4.78 -10.549332,8.34233 -16.827332,10.48833 h -3.33e-4 c -6.277999,-2.146 -12.047666,-5.70766 -16.8276649,-10.48833 -1.279,-1.27867 -2.471,-2.629 -3.572,-4.03966 0,0 -3.33e-4,0 0,0 1.303,0.20966 2.648333,0.146 3.947667,-0.20167 0.805333,-0.216 1.5706659,-0.535 2.2803329,-0.94467 0.0093,-0.005 -0.01133,0.007 -0.002,10e-4 1.423999,-0.823 3.051666,-1.26634 4.724999,-1.26634 0.0033,0 -0.0043,0 -10e-4,0 1.644667,-6.6e-4 3.276333,0.429 4.725333,1.26567 2.170333,1.25333 4.749333,1.59233 7.169999,0.944 0.805334,-0.216 1.571,-0.535 2.280667,-0.94467 0.009,-0.005 -0.01167,0.007 -0.002,0.001 1.423666,-0.823 3.051333,-1.26634 4.724666,-1.26634 0.0033,0 -0.004,0 -6.67e-4,0 1.644667,-6.6e-4 3.276,0.429 4.725333,1.26567 1.89,1.09167 4.091,1.48967 6.226666,1.14533 6.67e-4,0 0,0 -6.66e-4,6.7e-4" />
     </g>
   </g>
 </svg>

bitmaps_png/sources/pinshape_clock_active_low.svg

@@ -11,7 +11,7 @@
    width="16"
    version="1.1"
    id="svg2"
-   inkscape:version="0.48.4 r9939"
+   inkscape:version="0.92.0 r15299"
    sodipodi:docname="pinshape_clock_active_low.svg">
   <metadata
      id="metadata22">
@@ -21,8 +21,23 @@
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+        <dc:title></dc:title>
+        <cc:license
+           rdf:resource="http://creativecommons.org/licenses/by/4.0/" />
       </cc:Work>
+      <cc:License
+         rdf:about="http://creativecommons.org/licenses/by/4.0/">
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Reproduction" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Distribution" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Notice" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Attribution" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#DerivativeWorks" />
+      </cc:License>
     </rdf:RDF>
   </metadata>
   <defs
@@ -36,15 +51,15 @@
      guidetolerance="10"
      inkscape:pageopacity="0"
      inkscape:pageshadow="2"
-     inkscape:window-width="1366"
-     inkscape:window-height="744"
+     inkscape:window-width="1920"
+     inkscape:window-height="1033"
      id="namedview18"
      showgrid="true"
      inkscape:zoom="24.969708"
      inkscape:cx="4.4578733"
      inkscape:cy="9.2981956"
-     inkscape:window-x="0"
-     inkscape:window-y="24"
+     inkscape:window-x="-4"
+     inkscape:window-y="-4"
      inkscape:window-maximized="1"
      inkscape:current-layer="svg2">
     <inkscape:grid

bitmaps_png/sources/pinshape_clock_fall.svg

@@ -11,8 +11,8 @@
    width="16"
    version="1.1"
    id="svg2"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="pinshape_clock_fall.svg">
+   inkscape:version="0.92.0 r15299"
+   sodipodi:docname="pinshape_clock_active_low.svg">
   <metadata
      id="metadata22">
     <rdf:RDF>
@@ -21,8 +21,23 @@
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title />
+        <dc:title></dc:title>
+        <cc:license
+           rdf:resource="http://creativecommons.org/licenses/by/4.0/" />
       </cc:Work>
+      <cc:License
+         rdf:about="http://creativecommons.org/licenses/by/4.0/">
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Reproduction" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Distribution" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Notice" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Attribution" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#DerivativeWorks" />
+      </cc:License>
     </rdf:RDF>
   </metadata>
   <defs
@@ -36,15 +51,15 @@
      guidetolerance="10"
      inkscape:pageopacity="0"
      inkscape:pageshadow="2"
-     inkscape:window-width="1366"
-     inkscape:window-height="744"
+     inkscape:window-width="1920"
+     inkscape:window-height="1033"
      id="namedview18"
      showgrid="true"
      inkscape:zoom="24.969708"
      inkscape:cx="4.4578733"
      inkscape:cy="9.2981956"
-     inkscape:window-x="0"
-     inkscape:window-y="24"
+     inkscape:window-x="-4"
+     inkscape:window-y="-4"
      inkscape:window-maximized="1"
      inkscape:current-layer="svg2">
     <inkscape:grid
@@ -56,19 +71,25 @@
        snapvisiblegridlinesonly="true" />
   </sodipodi:namedview>
   <path
-     d="M 1,0 1,16"
+     d="M 5,0 5,16"
      id="path12"
      inkscape:connector-curvature="0"
      style="fill:none;stroke:#1a1a1a;stroke-width:2;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none"
      sodipodi:nodetypes="cc" />
   <path
-     d="M 6,8 16,8"
+     d="M 5,8 16,8"
      id="path14"
      inkscape:connector-curvature="0"
      style="fill:none;stroke:#1a1a1a;stroke-width:2;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none"
      sodipodi:nodetypes="cc" />
   <path
-     d="M 1,13 6,8 1,3"
+     sodipodi:nodetypes="ccc"
+     style="fill:none;stroke:#1a1a1a;stroke-width:2;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none"
+     inkscape:connector-curvature="0"
+     id="path4010"
+     d="m 5,8 7,-6 0,6" />
+  <path
+     d="M 5,13 1,8 5,3"
      id="path4094"
      inkscape:connector-curvature="0"
      style="fill:none;stroke:#1a1a1a;stroke-width:2;stroke-linecap:butt;stroke-miterlimit:4;stroke-dasharray:none"

bitmaps_png/sources/pinshape_clock_invert.svg

@@ -11,8 +11,8 @@
    width="16"
    version="1.1"
    id="svg2"
-   inkscape:version="0.48.4 r9939"
-   sodipodi:docname="pinshape_clock_normal.svg">
+   inkscape:version="0.92.0 r15299"
+   sodipodi:docname="pinshape_clock_invert.svg">
   <metadata
      id="metadata22">
     <rdf:RDF>
@@ -22,7 +22,22 @@
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
         <dc:title></dc:title>
+        <cc:license
+           rdf:resource="http://creativecommons.org/licenses/by/4.0/" />
       </cc:Work>
+      <cc:License
+         rdf:about="http://creativecommons.org/licenses/by/4.0/">
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Reproduction" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#Distribution" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Notice" />
+        <cc:requires
+           rdf:resource="http://creativecommons.org/ns#Attribution" />
+        <cc:permits
+           rdf:resource="http://creativecommons.org/ns#DerivativeWorks" />
+      </cc:License>
     </rdf:RDF>
   </metadata>
   <defs
@@ -36,15 +51,15 @@
      guidetolerance="10"
      inkscape:pageopacity="0"
      inkscape:pageshadow="2"
-     inkscape:window-width="1366"
-     inkscape:window-height="744"
+     inkscape:window-width="1920"
+     inkscape:window-height="1033"
      id="namedview18"
      showgrid="true"
      inkscape:zoom="24.969708"
      inkscape:cx="18.434809"
      inkscape:cy="9.4183412"
-     inkscape:window-x="0"
-     inkscape:window-y="24"
+     inkscape:window-x="-4"
+     inkscape:window-y="-4"
      inkscape:window-maximized="1"
      inkscape:current-layer="svg2">
     <inkscape:grid

common/CMakeLists.txt

@@ -153,10 +153,10 @@ install( TARGETS lib_kicad
 endif()
 
 
-# KiCad build version string defaults to "no-vcs-found" which forces the build version header
-# command to look for git to create the version string header when the .git path is found in
-# the source path.
-set( KICAD_BRANCH_NAME "" CACHE STRING "KiCad repository name." )
+# The build version string defaults to the value in the KiCadVersion.cmake file.
+# If being built inside a git repository, the git tag and commit hash are used to create
+# a new version string instead. The user can supply an additional string to be appended
+# to the end inside the KICAD_VERSION_EXTRA variable
 set( KICAD_VERSION_EXTRA "" CACHE STRING
     "User defined configuration string to append to KiCad version." )
 
@@ -164,14 +164,13 @@ set( KICAD_VERSION_EXTRA "" CACHE STRING
 add_custom_target(
     version_header ALL
     COMMAND ${CMAKE_COMMAND}
-        -DKICAD_VERSION=${KICAD_VERSION}
-        -DKICAD_BRANCH_NAME=${KICAD_BRANCH_NAME}
         -DKICAD_VERSION_EXTRA=${KICAD_VERSION_EXTRA}
         -DOUTPUT_FILE=${CMAKE_BINARY_DIR}/kicad_build_version.h
         -DSRC_PATH=${PROJECT_SOURCE_DIR}
         -DCMAKE_MODULE_PATH=${CMAKE_MODULE_PATH}
         -P ${CMAKE_MODULE_PATH}/WriteVersionHeader.cmake
     WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+    BYPRODUCTS ${CMAKE_BINARY_DIR}/kicad_build_version.h
     COMMENT "Generating version string header"
     )
 
@@ -188,7 +187,6 @@ set( COMMON_DLG_SRCS
     dialogs/dialog_configure_paths_base.cpp
     dialogs/dialog_display_info_HTML_base.cpp
     dialogs/dialog_edit_library_tables.cpp
-    dialogs/dialog_exit_base.cpp
     dialogs/dialog_file_dir_picker.cpp
     dialogs/dialog_global_lib_table_config.cpp
     dialogs/dialog_global_lib_table_config_base.cpp
@@ -225,6 +223,7 @@ set( COMMON_WIDGET_SRCS
     widgets/paged_dialog.cpp
     widgets/progress_reporter.cpp
     widgets/stepped_slider.cpp
+    widgets/tab_traversal.cpp
     widgets/text_ctrl_eval.cpp
     widgets/two_column_tree_list.cpp
     widgets/ui_common.cpp
@@ -278,6 +277,7 @@ set( COMMON_SRCS
     ${PLOTTERS_CONTROL_SRCS}
     advanced_config.cpp
     array_options.cpp
+    base64.cpp
     base_struct.cpp
     bezier_curves.cpp
     bin_mod.cpp
@@ -292,8 +292,10 @@ set( COMMON_SRCS
     config_params.cpp
     confirm.cpp
     convert_basic_shapes_to_polygon.cpp
+    cursor_store.cpp
     dialog_shim.cpp
     displlst.cpp
+    dpi_scaling.cpp
     draw_graphic_text.cpp
     dsnlexer.cpp
     eagle_parser.cpp
@@ -320,12 +322,12 @@ set( COMMON_SRCS
     hotkey_store.cpp
     hotkeys_basic.cpp
     html_messagebox.cpp
-    incremental_text_ctrl.cpp
     kiface_i.cpp
     kiway.cpp
     kiway_express.cpp
     kiway_holder.cpp
     kiway_player.cpp
+    launch_ext.cpp
     lib_id.cpp
     lib_table_base.cpp
     lib_table_keywords.cpp
@@ -379,6 +381,14 @@ if( BUILD_GITHUB_PLUGIN )
     )
 endif()
 
+# Link-time optimization (LTO) on GCC conflicts with embedded assembly (__asm),
+# following GCC's recommendation to disable LTO per translation unit.
+if( "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
+    set_source_files_properties( system/libcontext.cpp PROPERTIES
+        COMPILE_FLAGS "-fno-lto"
+        )
+endif()
+
 set( COMMON_SRCS
     ${COMMON_SRCS}
     system/libcontext.cpp
@@ -428,6 +438,7 @@ target_link_libraries( common
     ${Boost_LIBRARIES}
     ${CURL_LIBRARIES}
     ${OPENSSL_LIBRARIES}        # empty on Apple
+    ${wxWidgets_LIBRARIES}
     )
 
 
@@ -512,6 +523,7 @@ target_link_libraries( pcbcommon PUBLIC
 
 # auto-generate netlist_lexer.h and netlist_keywords.cpp
 make_lexer(
+    netlist_lexer_source_files
     ${CMAKE_CURRENT_SOURCE_DIR}/netlist.keywords
     ${PROJECT_SOURCE_DIR}/include/netlist_lexer.h
     ${CMAKE_CURRENT_SOURCE_DIR}/netlist_keywords.cpp
@@ -521,18 +533,12 @@ make_lexer(
     ${CMAKE_PROJECT_SOURCE_DIR}/pcbnew/netlist_reader.h
     )
 
-add_custom_target(
-    netlist_lexer_source_files ALL
-    DEPENDS
-        ${PROJECT_SOURCE_DIR}/include/netlist_lexer.h
-        ${CMAKE_CURRENT_SOURCE_DIR}/netlist_keywords.cpp
-    )
-
 add_dependencies( common netlist_lexer_source_files )
 add_dependencies( pcbcommon netlist_lexer_source_files )
 
 # auto-generate pcb_plot_params_lexer.h and pcb_plot_params_keywords.cpp
 make_lexer(
+    pcb_plot_lexer_source_files
     ${CMAKE_CURRENT_SOURCE_DIR}/pcb_plot_params.keywords
     ${PROJECT_SOURCE_DIR}/include/pcb_plot_params_lexer.h
     ${CMAKE_CURRENT_SOURCE_DIR}/pcb_plot_params_keywords.cpp
@@ -542,17 +548,11 @@ make_lexer(
     ${PROJECT_SOURCE_DIR}/pcbnew/pcb_plot_params.h
     )
 
-add_custom_target(
-    pcb_plot_lexer_source_files ALL
-    DEPENDS
-        ${PROJECT_SOURCE_DIR}/include/pcb_plot_params_lexer.h
-        ${CMAKE_CURRENT_SOURCE_DIR}/pcb_plot_params_keywords.cpp
-    )
-
 add_dependencies( pcbcommon pcb_plot_lexer_source_files )
 
 # auto-generate pcbnew_sexpr.h and pcbnew_sexpr.cpp
 make_lexer(
+    pcb_lexer_source_files
     ${CMAKE_CURRENT_SOURCE_DIR}/pcb.keywords
     ${PROJECT_SOURCE_DIR}/include/pcb_lexer.h
     ${CMAKE_CURRENT_SOURCE_DIR}/pcb_keywords.cpp
@@ -562,28 +562,22 @@ make_lexer(
     ${PROJECT_SOURCE_DIR}/pcbnew/pcb_parser.h
     )
 
-add_custom_target(
-    pcb_lexer_source_files ALL
-    DEPENDS
-        ${PROJECT_SOURCE_DIR}/include/pcb_lexer.h
-        ${CMAKE_CURRENT_SOURCE_DIR}/pcb_keywords.cpp
-    )
-
 add_dependencies( pcbcommon pcb_lexer_source_files )
 
 # auto-generate s-expression library table code.
 make_lexer(
+    lib_table_lexer_source_files
     ${CMAKE_CURRENT_SOURCE_DIR}/lib_table.keywords
     ${PROJECT_SOURCE_DIR}/include/lib_table_lexer.h
     ${CMAKE_CURRENT_SOURCE_DIR}/lib_table_keywords.cpp
     LIB_TABLE_T
-    )
 
-add_custom_target(
-    lib_table_lexer_source_files ALL
-    DEPENDS
-        ${PROJECT_SOURCE_DIR}/include/lib_table_lexer.h
-        ${CMAKE_CURRENT_SOURCE_DIR}/lib_table_keywords.cpp
+    # These files consume *_lexer.h
+    ${CMAKE_CURRENT_SOURCE_DIR}/fp_lib_table.cpp
+    ${CMAKE_CURRENT_SOURCE_DIR}/lib_table_base.cpp
+    ${PROJECT_SOURCE_DIR}/pcbnew/dialogs/panel_fp_lib_table.cpp
+    ${PROJECT_SOURCE_DIR}/eeschema/symbol_lib_table.cpp
+    ${PROJECT_SOURCE_DIR}/eeschema/dialogs/panel_sym_lib_table.cpp
     )
 
 add_dependencies( common lib_table_lexer_source_files )
@@ -592,19 +586,13 @@ add_dependencies( pcbcommon lib_table_lexer_source_files )
 # auto-generate page layout reader s-expression page_layout_reader_lexer.h
 # and title_block_reader_keywords.cpp.
 make_lexer(
+    page_layout_lexer_source_files
     ${CMAKE_CURRENT_SOURCE_DIR}/page_layout/page_layout_reader.keywords
     ${PROJECT_SOURCE_DIR}/include/page_layout_reader_lexer.h
     ${CMAKE_CURRENT_SOURCE_DIR}/page_layout/page_layout_reader_keywords.cpp
     TB_READER_T
     )
 
-add_custom_target(
-    page_layout_lexer_source_files ALL
-    DEPENDS
-        ${PROJECT_SOURCE_DIR}/include/page_layout_reader_lexer.h
-        ${CMAKE_CURRENT_SOURCE_DIR}/page_layout/page_layout_reader_keywords.cpp
-    )
-
 add_dependencies( common page_layout_lexer_source_files )
 
 # This one gets made only when testing.

common/base64.cpp

@@ -0,0 +1,157 @@
+/*
+ * This program source code file is part of KiCad, a free EDA CAD application.
+ *
+ * Copyright (C) 2019 KiCad Developers, see AUTHORS.txt for contributors.
+ *
+ * @author Seth Hillbrand <seth@kipro-pcb.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 3
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <base64.h>
+
+#include <cstdint>
+#include <cstddef>
+#include <limits>
+#include <vector>
+
+namespace {
+
+static const uint8_t ENCODE_BASE64[64] = {
+    0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48,
+    0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50,
+    0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
+    0x59, 0x5A, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66,
+    0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E,
+    0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76,
+    0x77, 0x78, 0x79, 0x7A, 0x30, 0x31, 0x32, 0x33,
+    0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x2B, 0x2F,
+};
+
+static const uint8_t E = -1;
+
+static const uint8_t DECODE_BASE64[128] = {
+/*  0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF */
+     E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,
+     E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E,
+     E,  E,  E,  E,  E,  E,  E,  E,  E,  E,  E, 62,  E,  E,  E, 63,
+    52, 53, 54, 55, 56, 57, 58, 59, 60, 61,  E,  E,  E,  E,  E,  E,
+     E,  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14,
+    15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25,  E,  E,  E,  E,  E,
+     E, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40,
+    41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,  E,  E,  E,  E,  E,
+};
+
+} // namespace
+
+namespace base64
+{
+    size_t encode_length( size_t aInputLen )
+    {
+        return 4 * ( ( aInputLen + 2 ) / 3 ) + ( aInputLen + 2 ) % 3 - 2;
+    }
+
+
+    size_t decode_length( size_t aInputLen )
+    {
+        if( aInputLen % 4 == 1 )
+            return 0;
+        else
+            return 3 * ( ( aInputLen + 2 ) / 4 ) + ( aInputLen + 2 ) % 4 - 2;
+    }
+
+
+    void encode( const std::vector<uint8_t>& aInput, std::vector<uint8_t>& aOutput )
+    {
+        size_t end = ( aInput.size() / 3 ) * 3;
+        aOutput.reserve( encode_length( aInput.size() ) );
+
+        for( size_t i = 0; i < end; i += 3 )
+        {
+            unsigned value = ( aInput[i] << 16 ) | ( aInput[i + 1] << 8 ) | aInput[i + 2] ;
+
+            aOutput.emplace_back( ENCODE_BASE64[( value >> 18 ) & 0x3F] );
+            aOutput.emplace_back( ENCODE_BASE64[( value >> 12 ) & 0x3F] );
+            aOutput.emplace_back( ENCODE_BASE64[( value >> 6 ) & 0x3F] );
+            aOutput.emplace_back( ENCODE_BASE64[value & 0x3F] );
+        }
+
+        size_t remainder = aInput.size() - end;
+
+        if( remainder )
+        {
+            unsigned value = aInput[end];
+
+            if( remainder == 2 )
+            {
+                value = ( value << 10 ) | ( aInput[end + 1] << 2 );
+                aOutput.emplace_back( ENCODE_BASE64[( value >> 12 ) & 0x3F] );
+            }
+            else
+            {
+                value <<= 4;
+            }
+
+            aOutput.emplace_back( ENCODE_BASE64[( value >> 6 ) & 0x3F] );
+            aOutput.emplace_back( ENCODE_BASE64[value & 0x3F] );
+        }
+    }
+
+
+    void decode(const std::vector<uint8_t>& aInput, std::vector<uint8_t>& aOutput )
+    {
+        size_t end = ( aInput.size() / 4 ) * 4;
+        size_t decode_size = decode_length( aInput.size() );
+
+        if( !decode_size )
+            return;
+
+        aOutput.reserve( decode_size );
+
+        for( size_t i = 0; i < end; i++ )
+        {
+            unsigned value = ( DECODE_BASE64[aInput[i] & 0x7F] << 18 ) |
+                             ( DECODE_BASE64[aInput[i + 1] & 0x7F] << 12 ) |
+                             ( DECODE_BASE64[aInput[i + 2] & 0x7F] << 6 ) |
+                               DECODE_BASE64[aInput[i + 3] & 0x7F];
+
+            aOutput.emplace_back( ( value >> 16 ) & 0xff );
+            aOutput.emplace_back( ( value >> 8 ) & 0xff );
+            aOutput.emplace_back( value & 0xff );
+        }
+
+        size_t remainder = aInput.size() - end;
+
+        if( remainder )
+        {
+            unsigned value = ( ( DECODE_BASE64[aInput[end] & 0x7F] ) << 6 ) |
+                             ( DECODE_BASE64[aInput[end + 1] & 0x7F] );
+
+            if( remainder == 3 )
+            {
+                value = ( value << 6 ) | ( DECODE_BASE64[aInput[end + 2] & 0x7F] );
+                value >>= 2;
+
+                aOutput.emplace_back( ( value >> 8 ) & 0xff );
+            }
+            else
+            {
+                value >>= 4;
+            }
+            aOutput[0] = value & 0xff ;
+        }
+    }
+
+} // base64

common/base_screen.cpp

@@ -174,11 +174,7 @@ bool BASE_SCREEN::SetPreviousZoom()
     return false;
 }
 
-/* Build the list of human readable grid list.
- * The list shows the grid size both in mils or mm.
- * aMmFirst = true to have mm first and mils after
- *            false to have mils first and mm after
- */
+
 int BASE_SCREEN::BuildGridsChoiceList( wxArrayString& aGridsList, bool aMmFirst) const
 {
     wxString msg;

common/base_struct.cpp

@@ -405,6 +405,9 @@ bool EDA_RECT::Intersects( const wxPoint& aPoint1, const wxPoint& aPoint2 ) cons
 
 bool EDA_RECT::Intersects( const EDA_RECT& aRect ) const
 {
+    if( !m_init )
+        return false;
+
     // this logic taken from wxWidgets' geometry.cpp file:
     bool rc;
     EDA_RECT me(*this);
@@ -433,6 +436,9 @@ bool EDA_RECT::Intersects( const EDA_RECT& aRect ) const
 
 bool EDA_RECT::Intersects( const EDA_RECT& aRect, double aRot ) const
 {
+    if( !m_init )
+        return false;
+
     /* Most rectangles will be axis aligned.
      * It is quicker to check for this case and pass the rect
      * to the simpler intersection test
@@ -565,6 +571,9 @@ const wxPoint EDA_RECT::FarthestPointTo( const wxPoint& aPoint ) const
 
 bool EDA_RECT::IntersectsCircle( const wxPoint& aCenter, const int aRadius ) const
 {
+    if( !m_init )
+        return false;
+
     wxPoint closest = ClosestPointTo( aCenter );
 
     double dx = aCenter.x - closest.x;
@@ -578,6 +587,9 @@ bool EDA_RECT::IntersectsCircle( const wxPoint& aCenter, const int aRadius ) con
 
 bool EDA_RECT::IntersectsCircleEdge( const wxPoint& aCenter, const int aRadius, const int aWidth ) const
 {
+    if( !m_init )
+        return false;
+
     EDA_RECT me( *this );
     me.Normalize();         // ensure size is >= 0
 
@@ -675,6 +687,17 @@ EDA_RECT& EDA_RECT::Inflate( wxCoord dx, wxCoord dy )
 
 void EDA_RECT::Merge( const EDA_RECT& aRect )
 {
+    if( !m_init )
+    {
+        if( aRect.IsValid() )
+        {
+            m_Pos = aRect.GetPosition();
+            m_Size = aRect.GetSize();
+            m_init = true;
+        }
+        return;
+    }
+
     Normalize();        // ensure width and height >= 0
     EDA_RECT rect = aRect;
     rect.Normalize();   // ensure width and height >= 0
@@ -692,6 +715,13 @@ void EDA_RECT::Merge( const EDA_RECT& aRect )
 
 void EDA_RECT::Merge( const wxPoint& aPoint )
 {
+    if( !m_init )
+    {
+        m_Pos = aPoint;
+        m_Size = wxSize( 0, 0 );
+        return;
+    }
+
     Normalize();        // ensure width and height >= 0
 
     wxPoint  end = GetEnd();

common/base_units.cpp

@@ -266,6 +266,10 @@ wxString StringFromValue( EDA_UNITS_T aUnits, int aValue, bool aAddUnitSymbol, b
             stringValue += wxT( " deg" );
             break;
 
+        case PERCENT:
+            stringValue += wxT( "%" );
+            break;
+
         case UNSCALED_UNITS:
             break;
         }
@@ -294,6 +298,7 @@ double From_User_Unit( EDA_UNITS_T aUnits, double aValue, bool aUseMils )
 
     default:
     case UNSCALED_UNITS:
+    case PERCENT:
         return aValue;
     }
 }
@@ -442,6 +447,9 @@ wxString GetAbbreviatedUnitsLabel( EDA_UNITS_T aUnit, bool aUseMils )
     case MILLIMETRES:
         return _( "mm" );
 
+    case PERCENT:
+        return _( "%" );
+
     case UNSCALED_UNITS:
         return wxEmptyString;
 

common/bezier_curves.cpp

@@ -1,8 +1,7 @@
 /*
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
- * Copyright (C) 2014 Jean-Pierre Charras, jp.charras at wanadoo.fr
- * Copyright (C) 2014-2017 KiCad Developers, see CHANGELOG.TXT for contributors.
+ * Copyright (C) 2014-2019 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -26,362 +25,69 @@
 /* routines to handle bezier curves */
 /************************************/
 
-#include <fctsys.h>
 #include <bezier_curves.h>
 
-
-static inline double calc_sq_distance( int x1, int y1, int x2, int y2 )
+BEZIER_POLY::BEZIER_POLY( const std::vector<wxPoint>& aControlPoints )
 {
-    int dx = x2 - x1;
-    int dy = y2 - y1;
+    for( unsigned ii = 0; ii < aControlPoints.size(); ++ii )
+        m_ctrlPts.emplace_back( VECTOR2D( aControlPoints[ii] ) );
 
-    return (double)dx * dx + (double)dy * dy;
-}
-
-
-static inline double sqrt_len( int dx, int dy )
-{
-    return ((double)dx * dx) + ((double)dy * dy);
+    m_minSegLen = 0.0;
 }
 
 
 void BEZIER_POLY::GetPoly( std::vector<wxPoint>& aOutput, int aMinSegLen )
 {
-    wxCHECK( !m_ctrlPts.empty(), /* void */ );
-    m_minSegLen = std::max( 1, aMinSegLen );
-    m_output = &aOutput;
-    m_output->clear();
-    m_output->push_back( wxPoint( m_ctrlPts.front() ) );
+    aOutput.clear();
+    std::vector<VECTOR2D> buffer;
+    GetPoly( buffer, double( aMinSegLen ) );
 
-    // Only quadratic and cubic Bezier curves are handled
-    if( m_ctrlPts.size() == 3 )
-        recursiveBezier( m_ctrlPts[0].x, m_ctrlPts[0].y,
-                m_ctrlPts[1].x, m_ctrlPts[1].y,
-                m_ctrlPts[2].x, m_ctrlPts[2].y, 0 );
-
-    else if( m_ctrlPts.size() == 4 )
-        recursiveBezier( m_ctrlPts[0].x, m_ctrlPts[0].y,
-                m_ctrlPts[1].x, m_ctrlPts[1].y,
-                m_ctrlPts[2].x, m_ctrlPts[2].y,
-                m_ctrlPts[3].x, m_ctrlPts[3].y, 0 );
-
-    m_output->push_back( wxPoint( m_ctrlPts.back() ) );
+    for( unsigned ii = 0; ii < buffer.size(); ++ii )
+        aOutput.emplace_back( wxPoint( int( buffer[ii].x ), int( buffer[ii].y ) ) );
 }
 
 
-void BEZIER_POLY::recursiveBezier( int x1, int y1, int x2, int y2,
-        int x3, int y3, unsigned int level )
+void BEZIER_POLY::GetPoly( std::vector<VECTOR2D>& aOutput, double aMinSegLen )
 {
-    if( level > recursion_limit )
-        return;
+    wxASSERT( m_ctrlPts.size() == 4 );
+    // FIXME Brute force method, use a better (recursive?) algorithm
+    // with a max error value.
+    // to optimize the number of segments
+    #define CURVE_POINTS 32
+    double dt = 1.0 / CURVE_POINTS;
 
-    // Calculate all the mid-points of the line segments
-    //----------------------
-    int    x12  = (x1 + x2) / 2;
-    int    y12  = (y1 + y2) / 2;
-    int    x23  = (x2 + x3) / 2;
-    int    y23  = (y2 + y3) / 2;
-    int    x123 = (x12 + x23) / 2;
-    int    y123 = (y12 + y23) / 2;
+    aOutput.clear();
+    aOutput.push_back( m_ctrlPts[0] );
 
-    int    dx = x3 - x1;
-    int    dy = y3 - y1;
-    double d  = fabs( ((double) (x2 - x3) * dy) - ((double) (y2 - y3) * dx ) );
-    double da;
+    // If the Bezier curve is degenerated (straight line), skip intermediate points:
+    bool degenerated = m_ctrlPts[0] == m_ctrlPts[1] && m_ctrlPts[2] == m_ctrlPts[3];
 
-    if( d > curve_collinearity_epsilon )
+    if( !degenerated )
     {
-        // Regular case
-        //-----------------
-        if( d * d <= distance_tolerance_square * (dx * dx + dy * dy) )
+        for( int ii = 1; ii < CURVE_POINTS; ii++ )
         {
-            // If the curvature doesn't exceed the distance_tolerance value
-            // we tend to finish subdivisions.
-            //----------------------
-            if( angle_tolerance < curve_angle_tolerance_epsilon )
-            {
-                addSegment( wxPoint( x123, y123 ) );
-                return;
-            }
+            double t = dt * ii;
+            double omt  = 1.0 - t;
+            double omt2 = omt * omt;
+            double omt3 = omt * omt2;
+            double t2   = t * t;
+            double t3   = t * t2;
 
-            // Angle & Cusp Condition
-            //----------------------
-            da = fabs( atan2( (double) ( y3 - y2 ), (double) ( x3 - x2 ) ) -
-                       atan2( (double) ( y2 - y1 ), (double) ( x2 - x1 ) ) );
-            if( da >=M_PI )
-                da = 2 * M_PI - da;
+            VECTOR2D vertex = omt3 * m_ctrlPts[0]
+                              + 3.0 * t * omt2 * m_ctrlPts[1]
+                              + 3.0 * t2 * omt * m_ctrlPts[2]
+                              + t3 * m_ctrlPts[3];
 
-            if( da < angle_tolerance )
-            {
-                // Finally we can stop the recursion
-                //----------------------
-                addSegment( wxPoint( x123, y123 ) );
-                return;
-            }
-        }
-    }
-    else
-    {
-        // Collinear case
-        //------------------
-        da = sqrt_len(dx, dy);
-        if( da == 0 )
-        {
-            d = calc_sq_distance( x1, y1, x2, y2 );
-        }
-        else
-        {
-            d = ( (double)(x2 - x1) * dx + (double)(y2 - y1) * dy ) / da;
-            if( d > 0 && d < 1 )
-            {
-                // Simple collinear case, 1---2---3
-                // We can leave just two endpoints
-                return;
-            }
-            if( d <= 0 )
-                d = calc_sq_distance( x2, y2, x1, y1 );
-            else if( d >= 1 )
-                d = calc_sq_distance( x2, y2, x3, y3 );
-            else
-                d = calc_sq_distance( x2, y2, x1 + (int) d * dx,
-                                      y1 + (int) d * dy );
-        }
-        if( d < distance_tolerance_square )
-        {
-            addSegment( wxPoint( x2, y2 ) );
-            return;
+            // a minimal filter on the lenght of the segment being created:
+            // The offset from last point:
+            VECTOR2D delta = vertex - aOutput.back();
+            double dist = delta.EuclideanNorm();
+
+            if( dist > aMinSegLen )
+                aOutput.push_back( vertex );
         }
     }
 
-    // Continue subdivision
-    //----------------------
-    recursiveBezier( x1, y1, x12, y12, x123, y123, level + 1 );
-    recursiveBezier( x123, y123, x23, y23, x3, y3, level + 1 );
-}
-
-
-void BEZIER_POLY::recursiveBezier( int x1, int y1, int x2, int y2,
-        int x3, int y3, int x4, int y4, unsigned int level )
-{
-    if( level > recursion_limit )
-        return;
-
-    // Calculate all the mid-points of the line segments
-    //----------------------
-    int x12   = (x1 + x2) / 2;
-    int y12   = (y1 + y2) / 2;
-    int x23   = (x2 + x3) / 2;
-    int y23   = (y2 + y3) / 2;
-    int x34   = (x3 + x4) / 2;
-    int y34   = (y3 + y4) / 2;
-    int x123  = (x12 + x23) / 2;
-    int y123  = (y12 + y23) / 2;
-    int x234  = (x23 + x34) / 2;
-    int y234  = (y23 + y34) / 2;
-    int x1234 = (x123 + x234) / 2;
-    int y1234 = (y123 + y234) / 2;
-
-
-    // Try to approximate the full cubic curve by a single straight line
-    //------------------
-    int    dx = x4 - x1;
-    int    dy = y4 - y1;
-
-    double d2 = fabs( (double) ( (x2 - x4) * dy - (y2 - y4) * dx ) );
-    double d3 = fabs( (double) ( (x3 - x4) * dy - (y3 - y4) * dx ) );
-    double da1, da2, k;
-
-    switch( (int(d2 > curve_collinearity_epsilon) << 1) +
-           int(d3 > curve_collinearity_epsilon) )
-    {
-    case 0:
-
-        // All collinear OR p1==p4
-        //----------------------
-        k = dx * dx + dy * dy;
-        if( k == 0 )
-        {
-            d2 = calc_sq_distance( x1, y1, x2, y2 );
-            d3 = calc_sq_distance( x4, y4, x3, y3 );
-        }
-        else
-        {
-            k   = 1 / k;
-            da1 = x2 - x1;
-            da2 = y2 - y1;
-            d2  = k * (da1 * dx + da2 * dy);
-            da1 = x3 - x1;
-            da2 = y3 - y1;
-            d3  = k * (da1 * dx + da2 * dy);
-            if( d2 > 0 && d2 < 1 && d3 > 0 && d3 < 1 )
-            {
-                // Simple collinear case, 1---2---3---4
-                // We can leave just two endpoints
-                return;
-            }
-            if( d2 <= 0 )
-                d2 = calc_sq_distance( x2, y2, x1, y1 );
-            else if( d2 >= 1 )
-                d2 = calc_sq_distance( x2, y2, x4, y4 );
-            else
-                d2 = calc_sq_distance( x2, y2, x1 + (int) d2 * dx,
-                                       y1 + (int) d2 * dy );
-
-            if( d3 <= 0 )
-                d3 = calc_sq_distance( x3, y3, x1, y1 );
-            else if( d3 >= 1 )
-                d3 = calc_sq_distance( x3, y3, x4, y4 );
-            else
-                d3 = calc_sq_distance( x3, y3, x1 + (int) d3 * dx,
-                                       y1 + (int) d3 * dy );
-        }
-        if( d2 > d3 )
-        {
-            if( d2 < distance_tolerance_square )
-            {
-                addSegment( wxPoint( x2, y2 ) );
-                return;
-            }
-        }
-        else
-        {
-            if( d3 < distance_tolerance_square )
-            {
-                addSegment( wxPoint( x3, y3 ) );
-                return;
-            }
-        }
-        break;
-
-    case 1:
-
-        // p1,p2,p4 are collinear, p3 is significant
-        //----------------------
-        if( d3 * d3 <= distance_tolerance_square * sqrt_len(dx, dy) )
-        {
-            if( angle_tolerance < curve_angle_tolerance_epsilon )
-            {
-                addSegment( wxPoint( x23, y23 ) );
-                return;
-            }
-
-            // Angle Condition
-            //----------------------
-            da1 = fabs( atan2( (double) ( y4 - y3 ), (double) ( x4 - x3 ) ) -
-                        atan2( (double) ( y3 - y2 ), (double) ( x3 - x2 ) ) );
-            if( da1 >= M_PI )
-                da1 = 2 * M_PI - da1;
-
-            if( da1 < angle_tolerance )
-            {
-                addSegment( wxPoint( x2, y2 ) );
-                addSegment( wxPoint( x3, y3 ) );
-                return;
-            }
-
-            if( cusp_limit != 0.0 )
-            {
-                if( da1 > cusp_limit )
-                {
-                    addSegment( wxPoint( x3, y3 ) );
-                    return;
-                }
-            }
-        }
-        break;
-
-    case 2:
-
-        // p1,p3,p4 are collinear, p2 is significant
-        //----------------------
-        if( d2 * d2 <= distance_tolerance_square * sqrt_len(dx, dy) )
-        {
-            if( angle_tolerance < curve_angle_tolerance_epsilon )
-            {
-                addSegment( wxPoint( x23, y23 ) );
-                return;
-            }
-
-            // Angle Condition
-            //----------------------
-            da1 = fabs( atan2( (double) ( y3 - y2 ), (double) ( x3 - x2 ) ) -
-                        atan2( (double) ( y2 - y1 ), (double) ( x2 - x1 ) ) );
-            if( da1 >= M_PI )
-                da1 = 2 * M_PI - da1;
-
-            if( da1 < angle_tolerance )
-            {
-                addSegment( wxPoint( x2, y2 ) );
-                addSegment( wxPoint( x3, y3 ) );
-                return;
-            }
-
-            if( cusp_limit != 0.0 )
-            {
-                if( da1 > cusp_limit )
-                {
-                    addSegment( wxPoint( x2, y2 ) );
-                    return;
-                }
-            }
-        }
-        break;
-
-    case 3:
-
-        // Regular case
-        //-----------------
-        if( (d2 + d3) * (d2 + d3) <= distance_tolerance_square * sqrt_len(dx, dy) )
-        {
-            // If the curvature doesn't exceed the distance_tolerance value
-            // we tend to finish subdivisions.
-            //----------------------
-            if( angle_tolerance < curve_angle_tolerance_epsilon )
-            {
-                addSegment( wxPoint( x23, y23 ) );
-                return;
-            }
-
-            // Angle & Cusp Condition
-            //----------------------
-            k   = atan2( (double) ( y3 - y2 ), (double) ( x3 - x2 ) );
-            da1 = fabs( k - atan2( (double) ( y2 - y1 ),
-                                   (double) ( x2 - x1 ) ) );
-            da2 = fabs( atan2( (double) ( y4 - y3 ),
-                               (double) ( x4 - x3 ) ) - k );
-            if( da1 >= M_PI )
-                da1 = 2 * M_PI - da1;
-            if( da2 >= M_PI )
-                da2 = 2 * M_PI - da2;
-
-            if( da1 + da2 < angle_tolerance )
-            {
-                // Finally we can stop the recursion
-                //----------------------
-                addSegment( wxPoint( x23, y23 ) );
-                return;
-            }
-
-            if( cusp_limit != 0.0 )
-            {
-                if( da1 > cusp_limit )
-                {
-                    addSegment( wxPoint( x2, y2 ) );
-                    return;
-                }
-
-                if( da2 > cusp_limit )
-                {
-                    addSegment( wxPoint( x3, y3 ) );
-                    return;
-                }
-            }
-        }
-        break;
-    }
-
-    // Continue subdivision
-    //----------------------
-    recursiveBezier( x1, y1, x12, y12, x123, y123, x1234, y1234, level + 1 );
-    recursiveBezier( x1234, y1234, x234, y234, x34, y34, x4, y4, level + 1 );
+    if( aOutput.back() != m_ctrlPts[3] )
+        aOutput.push_back( m_ctrlPts[3] );
 }

common/bin_mod.cpp

@@ -25,6 +25,7 @@
 #include <bin_mod.h>
 #include <common.h>
 #include <pgm_base.h>
+#include <id.h>
 
 
 BIN_MOD::BIN_MOD( const char* aName ) :

common/bitmap_base.cpp

@@ -36,6 +36,7 @@
 
 #include "bitmap_base.h"
 
+#include <wx/dc.h>
 #include <wx/mstream.h>
 
 
@@ -238,10 +239,24 @@ void BITMAP_BASE::DrawBitmap( wxDC* aDC, const wxPoint& aPos )
     aDC->SetUserScale( scale * GetScalingFactor(), scale * GetScalingFactor() );
     aDC->SetLogicalOrigin( logicalOriginX / GetScalingFactor(),
                            logicalOriginY / GetScalingFactor() );
-    aDC->DrawBitmap( *m_bitmap,
-                     KiROUND( pos.x / GetScalingFactor() ),
-                     KiROUND( pos.y / GetScalingFactor() ),
-                     true );
+
+    pos.x  = KiROUND( pos.x / GetScalingFactor() );
+    pos.y  = KiROUND( pos.y / GetScalingFactor() );
+    size.x = KiROUND( size.x / GetScalingFactor() );
+    size.y = KiROUND( size.y / GetScalingFactor() );
+    aDC->SetClippingRegion( pos, size );
+
+    if( GetGRForceBlackPenState() )
+    {
+        wxBitmap result( m_bitmap->ConvertToImage().ConvertToGreyscale() );
+        aDC->DrawBitmap( result, pos.x, pos.y, true );
+    }
+    else
+    {
+        aDC->DrawBitmap( *m_bitmap, pos.x, pos.y, true );
+    }
+
+    aDC->DestroyClippingRegion();
     aDC->SetUserScale( scale, scale );
     aDC->SetLogicalOrigin( logicalOriginX, logicalOriginY );
 }

common/commit.cpp

@@ -64,7 +64,19 @@ COMMIT& COMMIT::Stage( EDA_ITEM* aItem, CHANGE_TYPE aChangeType )
         case CHT_MODIFY:
         {
             EDA_ITEM* parent = parentObject( aItem );
-            return createModified( parent, parent->Clone(), flag );
+            EDA_ITEM* clone = nullptr;
+
+            assert( parent );
+
+            if( parent )
+                clone = parent->Clone();
+
+            assert( clone );
+
+            if( clone )
+                return createModified( parent, clone, flag );
+
+            break;
         }
 
         default:

common/common.cpp

@@ -42,6 +42,7 @@
 #include <wx/url.h>
 
 #include <pgm_base.h>
+#include <clocale>
 
 using KIGFX::COLOR4D;
 
@@ -57,33 +58,63 @@ using KIGFX::COLOR4D;
 COLOR4D        g_GhostColor;
 
 
+// When reading/writing files, we need to swtich to setlocale( LC_NUMERIC, "C" ).
+// Works fine to read/write files with floating point numbers.
+// We can call setlocale( LC_NUMERIC, "C" ) or wxLocale( "C", "C", "C", false )
+// wxWidgets discourage a direct call to setlocale
+// However, for us, calling wxLocale( "C", "C", "C", false ) has a unwanted effect:
+// The I18N translations are no longer active, because the English dictionary is selected.
+// To read files, this is not a major issues, but the resul can differ
+// from using setlocale(xx, "C").
+// Previouly, we used only setlocale( LC_NUMERIC, "C" )
+//
+// Known issues are
+// on MSW
+//    using setlocale( LC_NUMERIC, "C" ) generates an alert message in debug mode,
+//    and this message ("Decimal separator mismatch") must be disabled.
+//    But calling wxLocale( "C", "C", "C", false ) works fine
+// On unix:
+//    calling wxLocale( "C", "C", "C", false ) breaks env vars containing non ASCII7 chars.
+//    these env vars return a empty string from wxGetEnv() in many cases, and if such a
+//    var must be read after calling wxLocale( "C", "C", "C", false ), it looks like empty
+//
+// So use wxLocale on Windows and setlocale on unix
+
+
+// set USE_WXLOCALE 0 to use setlocale, 1 to use wxLocale:
+#if defined( _WIN32 )
+#define USE_WXLOCALE 1
+#else
+#define USE_WXLOCALE 0
+#endif
+
+// On Windows, when using setlocale, a wx alert is generated
+// in some cases (reading a bitmap for instance)
+// So we disable alerts during the time a file is read or written
+#if !USE_WXLOCALE
 #if defined( _WIN32 ) && defined( DEBUG )
 // a wxAssertHandler_t function to filter wxWidgets alert messages when reading/writing a file
 // when switching the locale to LC_NUMERIC, "C"
 // It is used in class LOCALE_IO to hide a useless (in kicad) wxWidgets alert message
 void KiAssertFilter( const wxString &file, int line,
-                                  const wxString &func, const wxString &cond,
-                                  const wxString &msg)
+                     const wxString &func, const wxString &cond,
+                     const wxString &msg)
 {
     if( !msg.Contains( "Decimal separator mismatch" ) )
-        wxTheApp->OnAssertFailure( file, line, func, cond, msg );
+        wxTheApp->OnAssertFailure( file.c_str(), line, func.c_str(), cond.c_str(), msg.c_str() );
 }
 #endif
-
+#endif
 
 std::atomic<unsigned int> LOCALE_IO::m_c_count( 0 );
-
-
-// Note on Windows, setlocale( LC_NUMERIC, "C" ) works fine to read/write
-// files with floating point numbers, but generates a overzealous wx alert
-// in some cases (reading a bitmap for instance)
-// So we disable alerts during the time a file is read or written
-
-LOCALE_IO::LOCALE_IO()
+LOCALE_IO::LOCALE_IO() : m_wxLocale( nullptr )
 {
     // use thread safe, atomic operation
     if( m_c_count++ == 0 )
     {
+#if USE_WXLOCALE
+        m_wxLocale = new wxLocale( "C", "C", "C", false );
+#else
         // Store the user locale name, to restore this locale later, in dtor
         m_user_locale = setlocale( LC_NUMERIC, nullptr );
 #if defined( _WIN32 ) && defined( DEBUG )
@@ -92,6 +123,7 @@ LOCALE_IO::LOCALE_IO()
 #endif
         // Switch the locale to C locale, to read/write files with fp numbers
         setlocale( LC_NUMERIC, "C" );
+#endif
     }
 }
 
@@ -102,10 +134,15 @@ LOCALE_IO::~LOCALE_IO()
     if( --m_c_count == 0 )
     {
         // revert to the user locale
+#if USE_WXLOCALE
+        delete m_wxLocale;      // Deleting m_wxLocale restored previous locale
+        m_wxLocale = nullptr;
+#else
         setlocale( LC_NUMERIC, m_user_locale.c_str() );
 #if defined( _WIN32 ) && defined( DEBUG )
         // Enable wxWidgets alerts
         wxSetDefaultAssertHandler();
+#endif
 #endif
     }
 }
@@ -167,12 +204,12 @@ void SelectReferenceNumber( wxTextEntry* aTextEntry )
     {
         wxString num = ref;
 
-        while( !num.IsEmpty() && ( !isdigit( num.Last() ) || !isdigit( num.GetChar( 0 ) ) ) )
+        while( !num.IsEmpty() && ( !wxIsdigit( num.Last() ) || !wxIsdigit( num.GetChar( 0 ) ) ) )
         {
-            if( !isdigit( num.Last() ) )
+            if( !wxIsdigit( num.Last() ) )
                 num.RemoveLast();
 
-            if( !isdigit( num.GetChar ( 0 ) ) )
+            if( !wxIsdigit( num.GetChar ( 0 ) ) )
                 num = num.Right( num.Length() - 1);
         }
 
@@ -425,7 +462,7 @@ wxString KIwxExpandEnvVars(const wxString& str)
                     if( !expanded )
                         strResult << (wxChar)bracket;
 
-                    str_m = str[++m];
+                    m++;
                 }
             }
 
@@ -450,6 +487,11 @@ wxString KIwxExpandEnvVars(const wxString& str)
         }
     }
 
+#ifndef __WINDOWS__
+    if( strResult.StartsWith( "~" ) )
+        strResult.Replace( "~", wxGetHomeDir(), false );
+#endif // __WINDOWS__
+
     return strResult;
 }
 

common/confirm.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2007 Jean-Pierre Charras, jp.charras at wanadoo.fr
- * Copyright (C) 1992-2017 KiCad Developers, see AUTHORS.txt for contributors.
+ * Copyright (C) 1992-2019 KiCad Developers, see AUTHORS.txt for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -33,7 +33,6 @@
 #include <confirm.h>
 #include <bitmaps.h>
 #include <html_messagebox.h>
-#include <dialog_exit_base.h>
 
 #include <functional>
 #include <unordered_map>
@@ -52,7 +51,8 @@ KIDIALOG::KIDIALOG( wxWindow* aParent, const wxString& aMessage,
 
 KIDIALOG::KIDIALOG( wxWindow* aParent, const wxString& aMessage,
         KD_TYPE aType, const wxString& aCaption )
-    : wxRichMessageDialog( aParent, aMessage, getCaption( aType, aCaption ), getStyle( aType ) )
+    : wxRichMessageDialog( aParent, aMessage, getCaption( aType, aCaption ), getStyle( aType ) ),
+      m_hash( 0 )
 {
 }
 
@@ -89,10 +89,10 @@ bool KIDIALOG::Show( bool aShow )
             return it->second;
     }
 
-    bool ret = wxRichMessageDialog::Show( aShow );
+    int ret = wxRichMessageDialog::Show( aShow );
 
-    // Has the user asked not to show the dialog again
-    if( IsCheckBoxChecked() )
+    // Has the user asked not to show the dialog again and it was confirmed
+    if( IsCheckBoxChecked() && ret != wxID_CANCEL )
         doNotShowAgainDlgs[m_hash] = ret;
 
     return ret;
@@ -110,7 +110,7 @@ int KIDIALOG::ShowModal()
     int ret = wxRichMessageDialog::ShowModal();
 
     // Has the user asked not to show the dialog again
-    if( IsCheckBoxChecked() )
+    if( IsCheckBoxChecked() && ret != wxID_CANCEL )
         doNotShowAgainDlgs[m_hash] = ret;
 
     return ret;
@@ -152,67 +152,56 @@ long KIDIALOG::getStyle( KD_TYPE aType )
 }
 
 
-class DIALOG_EXIT: public DIALOG_EXIT_BASE
-{
-public:
-    DIALOG_EXIT( wxWindow *aParent, const wxString& aWarning, const wxString& aMessage,
-                 const wxString& aOKLabel, const wxString& aCancelLabel ) :
-        DIALOG_EXIT_BASE( aParent )
-    {
-        m_bitmap->SetBitmap( KiBitmap( dialog_warning_xpm ) );
-        m_TextInfo->SetLabel( aWarning );
-        m_staticText2->SetLabel( aMessage );
-
-        m_sdbSizer1OK->SetLabel( aOKLabel );
-        m_sdbSizer1Cancel->SetLabel( aCancelLabel );
-        m_sdbSizer1OK->SetDefault();
-
-        Layout();
-
-        FinishDialogSettings();
-    };
-
-private:
-    void OnSave( wxCommandEvent& event ) override { EndModal( wxID_YES ); }
-    void OnDiscard( wxCommandEvent& event ) override { EndModal( wxID_NO ); }
-};
-
-
 int UnsavedChangesDialog( wxWindow* parent, const wxString& aMessage, bool* aApplyToAll )
 {
-    DIALOG_EXIT dlg( parent, aMessage,
-                     _( "If you don't save, all your changes will be permanently lost." ),
-                     _( "Save" ), _( "Cancel" ) );
+    wxRichMessageDialog dlg( parent, aMessage, wxEmptyString,
+                             wxYES_NO | wxCANCEL | wxYES_DEFAULT | wxICON_WARNING | wxCENTER );
+    dlg.ShowDetailedText( _( "If you don't save, all your changes will be permanently lost." ) );
+    dlg.SetYesNoLabels( wxMessageDialog::ButtonLabel( _( "Save" ) ),
+                        wxMessageDialog::ButtonLabel( _( "Discard Changes" ) ) );
 
-    dlg.m_ApplyToAllOpt->Show( aApplyToAll != nullptr );
+    if( aApplyToAll )
+        dlg.ShowCheckBox( _( "Apply to all" ), true );
 
     int ret = dlg.ShowModal();
 
     if( aApplyToAll )
-        *aApplyToAll = dlg.m_ApplyToAllOpt->GetValue();
+        *aApplyToAll = dlg.IsCheckBoxChecked();
 
     // Returns wxID_YES, wxID_NO, or wxID_CANCEL
     return ret;
 }
 
 
+int UnsavedChangesDialog( wxWindow* parent, const wxString& aMessage )
+{
+    wxMessageDialog dlg( parent, aMessage, wxEmptyString,
+                         wxYES_NO | wxCANCEL | wxYES_DEFAULT | wxICON_WARNING | wxCENTER );
+    dlg.SetExtendedMessage( _( "If you don't save, all your changes will be permanently lost." ) );
+    dlg.SetYesNoLabels( wxMessageDialog::ButtonLabel( _( "Save" ) ),
+                        wxMessageDialog::ButtonLabel( _( "Discard Changes" ) ) );
+
+    // Returns wxID_YES, wxID_NO, or wxID_CANCEL
+    return dlg.ShowModal();
+}
+
+
 bool ConfirmRevertDialog( wxWindow* parent, const wxString& aMessage )
 {
-    DIALOG_EXIT dlg( parent, aMessage,
-                     _( "Your current changes will be permanently lost." ),
-                     _( "Revert" ), _( "Cancel" ) );
+    wxMessageDialog dlg( parent, aMessage, wxEmptyString,
+                         wxOK | wxCANCEL | wxOK_DEFAULT | wxICON_WARNING | wxCENTER );
+    dlg.SetExtendedMessage( _( "Your current changes will be permanently lost." ) );
+    dlg.SetOKCancelLabels( wxMessageDialog::ButtonLabel( _( "Revert" ) ),
+                           wxMessageDialog::ButtonLabel( _( "Cancel" ) ) );
 
-    dlg.m_ApplyToAllOpt->Show( false );
-    dlg.m_DiscardButton->Show( false );
-
-    return dlg.ShowModal() == wxID_YES;
+    return dlg.ShowModal() == wxID_OK;
 }
 
 
 bool HandleUnsavedChanges( wxWindow* aParent, const wxString& aMessage,
                            const std::function<bool()>& aSaveFunction )
 {
-    switch( UnsavedChangesDialog( aParent, aMessage, nullptr ) )
+    switch( UnsavedChangesDialog( aParent, aMessage ) )
     {
     case wxID_YES:    return aSaveFunction();
     case wxID_NO:     return true;
@@ -222,20 +211,24 @@ bool HandleUnsavedChanges( wxWindow* aParent, const wxString& aMessage,
 }
 
 
-int YesOrCancelDialog( wxWindow* aParent, const wxString& aWarning, const wxString& aMessage,
-                       const wxString& aOKLabel, const wxString& aCancelLabel, bool* aApplyToAll )
+int OKOrCancelDialog( wxWindow* aParent, const wxString& aWarning, const wxString& aMessage,
+                      const wxString& aOKLabel, const wxString& aCancelLabel, bool* aApplyToAll )
 {
-    DIALOG_EXIT dlg( aParent, aWarning, aMessage, aOKLabel, aCancelLabel );
+    wxRichMessageDialog dlg( aParent, aMessage, wxEmptyString,
+                             wxOK | wxCANCEL | wxOK_DEFAULT | wxICON_WARNING | wxCENTER );
+    dlg.ShowDetailedText( _( "If you don't save, all your changes will be permanently lost." ) );
+    dlg.SetOKCancelLabels( wxMessageDialog::ButtonLabel( aOKLabel ),
+                           wxMessageDialog::ButtonLabel( aCancelLabel ) );
 
-    dlg.m_ApplyToAllOpt->Show( aApplyToAll != nullptr );
-    dlg.m_DiscardButton->Show( false );
+    if( aApplyToAll )
+        dlg.ShowCheckBox( _( "Apply to all" ), true );
 
     int ret = dlg.ShowModal();
 
     if( aApplyToAll )
-        *aApplyToAll = dlg.m_ApplyToAllOpt->GetValue();
+        *aApplyToAll = dlg.IsCheckBoxChecked();
 
-    // Returns wxID_YES, wxID_NO, or wxID_CANCEL
+    // Returns wxID_OK or wxID_CANCEL
     return ret;
 }
 
@@ -295,12 +288,14 @@ bool IsOK( wxWindow* aParent, const wxString& aMessage )
 {
     wxMessageDialog dlg( aParent, aMessage, _( "Confirmation" ),
                          wxYES_NO | wxCENTRE | wxICON_QUESTION | wxSTAY_ON_TOP );
+    dlg.SetEscapeId( wxID_NO );
 
     return dlg.ShowModal() == wxID_YES;
 }
 
 
-int SelectSingleOption( wxWindow* aParent, const wxString& aTitle, const wxString& aMessage, const wxArrayString& aOptions )
+int SelectSingleOption( wxWindow* aParent, const wxString& aTitle,
+                        const wxString& aMessage, const wxArrayString& aOptions )
 {
     wxSingleChoiceDialog dlg( aParent, aMessage, aTitle, aOptions );
 

common/convert_basic_shapes_to_polygon.cpp

@@ -32,11 +32,42 @@
 #include <common.h>
 #include <convert_basic_shapes_to_polygon.h>
 
+/**
+ * Function TransformCircleToPolygon
+ * convert a circle to a polygon, using multiple straight lines
+ * @param aBuffer = a SHAPE_LINE_CHAIN to store the polygon corners
+ * @param aCenter = the center of the circle
+ * @param aRadius = the radius of the circle
+ * @param aCircleToSegmentsCount = the number of segments to approximate a circle
+ * Note: the polygon is inside the circle, so if you want to have the polygon
+ * outside the circle, you should give aRadius calculated with a correction factor
+ */
+void TransformCircleToPolygon( SHAPE_LINE_CHAIN& aBuffer,
+                               wxPoint aCenter, int aRadius,
+                               int aCircleToSegmentsCount )
+{
+    wxPoint corner_position;
+    double delta    = 3600.0 / aCircleToSegmentsCount;    // rot angle in 0.1 degree
+    double halfstep = delta/2;    // the starting value for rot angles
+
+    for( int ii = 0; ii < aCircleToSegmentsCount; ii++ )
+    {
+        corner_position.x   = aRadius;
+        corner_position.y   = 0;
+        double angle = (ii * delta) + halfstep;
+        RotatePoint( &corner_position, angle );
+        corner_position += aCenter;
+        aBuffer.Append( corner_position.x, corner_position.y );
+    }
+
+    aBuffer.SetClosed( true );
+}
+
 
 /**
  * Function TransformCircleToPolygon
  * convert a circle to a polygon, using multiple straight lines
- * @param aCornerBuffer = a buffer to store the polygon
+ * @param aCornerBuffer = a SHAPE_POLY_SET to store the polygon
  * @param aCenter = the center of the circle
  * @param aRadius = the radius of the circle
  * @param aCircleToSegmentsCount = the number of segments to approximate a circle
@@ -397,40 +428,14 @@ void TransformRingToPolygon( SHAPE_POLY_SET& aCornerBuffer,
         return;
     }
 
-    aCornerBuffer.NewOutline();
+    SHAPE_POLY_SET buffer;
 
-    // Draw the inner circle of the ring
-    int     delta = 3600 / aCircleToSegmentsCount;   // rotate angle in 0.1 degree
+    TransformCircleToPolygon( buffer, aCentre, outer_radius, aCircleToSegmentsCount );
 
-    for( int ii = 0; ii < 3600; ii += delta )
-    {
-        curr_point.x    = inner_radius;
-        curr_point.y    = 0;
-        RotatePoint( &curr_point, ii );
-        curr_point      += aCentre;
-        aCornerBuffer.Append( curr_point.x, curr_point.y );
-    }
+    // Build the hole:
+    buffer.NewHole();
+    TransformCircleToPolygon( buffer.Hole( 0, 0 ), aCentre, inner_radius, aCircleToSegmentsCount );
 
-    // Draw the last point of inner circle
-    aCornerBuffer.Append( aCentre.x + inner_radius, aCentre.y );
-
-    // Draw the outer circle of the ring
-    // the first point creates also a segment from the inner to the outer polygon
-    for( int ii = 0; ii < 3600; ii += delta )
-    {
-        curr_point.x    = outer_radius;
-        curr_point.y    = 0;
-        RotatePoint( &curr_point, -ii );
-        curr_point      += aCentre;
-        aCornerBuffer.Append( curr_point.x, curr_point.y );
-    }
-
-    // Draw the last point of outer circle
-    aCornerBuffer.Append( aCentre.x + outer_radius, aCentre.y );
-
-    // And connect the outer polygon to the inner polygon,.
-    // because a segment from inner to the outer polygon was already created,
-    // the final polygon is the inner and the outer outlines connected by
-    // 2 overlapping segments
-    aCornerBuffer.Append( aCentre.x + inner_radius, aCentre.y );
+    buffer.Fracture( SHAPE_POLY_SET::PM_FAST );
+    aCornerBuffer.Append( buffer );
 }

common/cursor_store.cpp

@@ -0,0 +1,100 @@
+/*
+ * This program source code file is part of KiCad, a free EDA CAD application.
+ *
+ * Copyright (C) 2019 KiCad Developers, see CHANGELOG.TXT for contributors.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, you may find one here:
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+ * or you may search the http://www.gnu.org website for the version 2 license,
+ * or you may write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+ */
+
+#include <cursor_store.h>
+
+#include <wx/bitmap.h>
+#include <wx/debug.h>
+
+
+/**
+ * Construct a cursor for the given definition.
+ *
+ * How to do this depends on the platform, see
+ * http://docs.wxwidgets.org/trunk/classwx_cursor.html
+ *
+ * @param  aDef the cursor definition
+ * @return      a newly constructed cursor if the platform is supported,
+ *              else wxNullCursor
+ */
+wxCursor constructCursor( const CURSOR_STORE::CURSOR_DEF& aDef )
+{
+#if defined( __WXMSW__ ) or defined( __WXMAC__ )
+
+    wxBitmap img_bitmap(
+            reinterpret_cast<const char*>( aDef.m_image_data ), aDef.m_size.x, aDef.m_size.y );
+    wxBitmap msk_bitmap(
+            reinterpret_cast<const char*>( aDef.m_mask_data ), aDef.m_size.x, aDef.m_size.y );
+    img_bitmap.SetMask( new wxMask( msk_bitmap ) );
+
+    wxImage image( img_bitmap.ConvertToImage() );
+
+#if defined( __WXMSW__ )
+    image.SetMaskColour( 255, 255, 255 );
+#endif
+
+    image.SetOption( wxIMAGE_OPTION_CUR_HOTSPOT_X, aDef.m_hotspot.x );
+    image.SetOption( wxIMAGE_OPTION_CUR_HOTSPOT_Y, aDef.m_hotspot.y );
+
+    return wxCursor{ image };
+
+#elif defined( __WXGTK__ ) or defined( __WXMOTIF__ )
+
+    return wxCursor{
+        reinterpret_cast<const char*>( aDef.m_image_data ),
+        aDef.m_size.x,
+        aDef.m_size.y,
+        aDef.m_hotspot.x,
+        aDef.m_hotspot.y,
+        reinterpret_cast<const char*>( aDef.m_mask_data ),
+    };
+
+#else
+    wxASSERT_MSG( false, "Unknown platform for cursor construction." );
+    return wxNullCursor;
+#endif
+}
+
+
+CURSOR_STORE::CURSOR_STORE( const std::vector<CURSOR_DEF>& aDefs )
+{
+    for( const auto& def : aDefs )
+    {
+        m_store[def.m_id_key] = constructCursor( def );
+    }
+}
+
+
+const wxCursor& CURSOR_STORE::Get( int aIdKey ) const
+{
+    const auto find_iter = m_store.find( aIdKey );
+
+    if( find_iter != m_store.end() )
+    {
+        return find_iter->second;
+    }
+
+    wxASSERT_MSG( false,
+            wxString::Format( "Could not find cursor with ID %d", static_cast<int>( aIdKey ) ) );
+    return wxNullCursor;
+}

common/dialog_about/AboutDialog_main.cpp

@@ -64,7 +64,7 @@ static void buildKicadAboutBanner( EDA_BASE_FRAME* aParent, ABOUT_APP_INFO& aInf
     aInfo.SetAppName( Pgm().App().GetAppName() );
 
     /* Copyright information */
-    aInfo.SetCopyright( "(C) 1992-2018 KiCad Developers Team" );
+    aInfo.SetCopyright( "(C) 1992-2020 KiCad Developers Team" );
 
     /* KiCad build version */
     wxString version;
@@ -130,11 +130,7 @@ static void buildKicadAboutBanner( EDA_BASE_FRAME* aParent, ABOUT_APP_INFO& aInf
     description << "<ul>";
     description << "<li>"
                 << _( "The official KiCad website - " )
-                << HtmlHyperlink( "http://www.kicad-pcb.org" )
-                << "</li>";
-    description << "<li>"
-                << _( "Developer website on Launchpad - " )
-                << HtmlHyperlink( "https://launchpad.net/kicad" )
+                << HtmlHyperlink( "https://www.kicad.org" )
                 << "</li>";
 
     description << "<li>"
@@ -152,8 +148,7 @@ static void buildKicadAboutBanner( EDA_BASE_FRAME* aParent, ABOUT_APP_INFO& aInf
     description << "<ul>";
     description << "<li>"
                 << _( "Report or examine bugs - " )
-                << HtmlHyperlink( "https://bugs.launchpad.net/kicad/+bugs?orderby=-id&start=0",
-                                  "https://bugs.launchpad.net/kicad" )
+                << HtmlHyperlink( "https://gitlab.com/kicad/code/kicad/issues" )
                 << "</li>";
     description << "</ul></p>";
 
@@ -164,12 +159,7 @@ static void buildKicadAboutBanner( EDA_BASE_FRAME* aParent, ABOUT_APP_INFO& aInf
     description << "<ul>";
     description << "<li>"
                 << _( "KiCad forum - " )
-                << HtmlHyperlink( "https://forum.kicad.info" )
-                << "</li>";
-
-    description << "<li>"
-                <<_(  "KiCad user's group - " )
-                << HtmlHyperlink( "https://groups.yahoo.com/neo/groups/kicad-users/info" )
+                << HtmlHyperlink( "https://go.kicad.org/forum" )
                 << "</li>";
 
     description << "</ul></p>";

common/dialog_about/dialog_about.cpp

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2010 Rafael Sokolowski <Rafael.Sokolowski@web.de>
- * Copyright (C) 2017 KiCad Developers, see CHANGELOG.TXT for contributors.
+ * Copyright (C) 2017-2019 KiCad Developers, see CHANGELOG.TXT for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -68,6 +68,8 @@ extern std::string GetCurlLibVersion();
 DIALOG_ABOUT::DIALOG_ABOUT( EDA_BASE_FRAME *aParent, ABOUT_APP_INFO& aAppInfo )
     : DIALOG_ABOUT_BASE( aParent ), m_info( aAppInfo )
 {
+    wxASSERT( aParent != nullptr );
+
     m_picInformation = KiBitmap( info_xpm );
     m_picDevelopers  = KiBitmap( preference_xpm );
     m_picDocWriters  = KiBitmap( editor_xpm );
@@ -89,11 +91,13 @@ DIALOG_ABOUT::DIALOG_ABOUT( EDA_BASE_FRAME *aParent, ABOUT_APP_INFO& aAppInfo )
         m_bitmapApp->SetBitmap( icon );
     }
 
-    m_staticTextAppTitle->SetLabel( m_info.GetAppName() );
+    m_titleName = aParent->GetAboutTitle();
+    m_staticTextAppTitle->SetLabel( m_titleName );
     m_staticTextCopyright->SetLabel( m_info.GetCopyright() );
     m_staticTextBuildVersion->SetLabel( "Version: " + m_info.GetBuildVersion() );
     m_staticTextLibVersion->SetLabel( m_info.GetLibVersion() );
 
+    SetTitle( wxString::Format( _( "About %s" ), m_titleName ) );
     createNotebooks();
 
     GetSizer()->SetSizeHints( this );
@@ -124,10 +128,13 @@ void DIALOG_ABOUT::createNotebooks()
     createNotebookHtmlPage( m_auiNotebook, _( "Information" ), m_picInformation,
                             m_info.GetDescription() );
 
-    createNotebookPage( m_auiNotebook, _( "Developers" ) , m_picDevelopers, m_info.GetDevelopers() );
-    createNotebookPage( m_auiNotebook, _( "Doc Writers" ), m_picDocWriters, m_info.GetDocWriters() );
+    createNotebookPage( m_auiNotebook, _( "Developers" ) , m_picDevelopers,
+                        m_info.GetDevelopers() );
+    createNotebookPage( m_auiNotebook, _( "Doc Writers" ), m_picDocWriters,
+                        m_info.GetDocWriters() );
 
-    createNotebookPageByCategory( m_auiNotebook, _( "Artists" ), m_picArtists, m_info.GetArtists() );
+    createNotebookPageByCategory( m_auiNotebook, _( "Artists" ), m_picArtists,
+                                  m_info.GetArtists() );
     createNotebookPageByCategory( m_auiNotebook, _( "Translators" ), m_picTranslators,
                                   m_info.GetTranslators() );
     createNotebookPageByCategory( m_auiNotebook, _( "Packagers" ), m_picPackagers,
@@ -237,7 +244,8 @@ void DIALOG_ABOUT::createNotebookPageByCategory(wxAuiNotebook* aParent, const wx
             wxStaticText* m_staticText1 = new wxStaticText( m_scrolledWindow1, wxID_ANY,
                                                             contributor->GetCategory() + wxT( ":" ),
                                                             wxDefaultPosition, wxDefaultSize, 0 );
-            m_staticText1->SetFont( wxFont( -1, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD, false,
+            m_staticText1->SetFont( wxFont( -1, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL,
+                                            wxFONTWEIGHT_BOLD, false,
                                             wxEmptyString ) ); // bold font
             m_staticText1->Wrap( -1 );
             fgSizer1->Add( m_staticText1, 0, wxALIGN_LEFT|wxBOTTOM, 2 );
@@ -444,7 +452,7 @@ void DIALOG_ABOUT::buildVersionInfoData( wxString& aMsg, bool aFormatHtml )
     #define OFF "OFF" << eol
 
     wxPlatformInfo platform;
-    aMsg << "Application: " << m_info.GetAppName() << eol;
+    aMsg << "Application: " << m_titleName << eol;
     aMsg << "Version: " << m_info.GetBuildVersion() << eol;
     aMsg << "Libraries:" << eol;
     aMsg << indent4 << wxGetLibraryVersionInfo().GetVersionString() << eol;

common/dialog_about/dialog_about.h

@@ -2,7 +2,7 @@
  * This program source code file is part of KiCad, a free EDA CAD application.
  *
  * Copyright (C) 2010 Rafael Sokolowski <Rafael.Sokolowski@web.de>
- * Copyright (C) 2010-2017 KiCad Developers, see CHANGELOG.TXT for contributors.
+ * Copyright (C) 2010-2019 KiCad Developers, see CHANGELOG.TXT for contributors.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -49,6 +49,7 @@ private:
     wxBitmap     m_picTranslators;
     wxBitmap     m_picPackagers;
     wxBitmap     m_picLicense;
+    wxString     m_titleName;
 
     ABOUT_APP_INFO& m_info;
 

common/dialog_about/dialog_about_base.cpp

@@ -1,8 +1,8 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version May  6 2016)
+// C++ code generated with wxFormBuilder (version Mar 28 2019)
 // http://www.wxformbuilder.org/
 //
-// PLEASE DO "NOT" EDIT THIS FILE!
+// PLEASE DO *NOT* EDIT THIS FILE!
 ///////////////////////////////////////////////////////////////////////////
 
 #include "dialog_about_base.h"
@@ -12,77 +12,78 @@
 DIALOG_ABOUT_BASE::DIALOG_ABOUT_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : wxDialog( parent, id, title, pos, size, style )
 {
 	this->SetSizeHints( wxSize( -1,-1 ), wxDefaultSize );
-	
+
 	wxBoxSizer* bSizerMain;
 	bSizerMain = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxBoxSizer* bSizerTitle;
 	bSizerTitle = new wxBoxSizer( wxHORIZONTAL );
-	
-	
+
+
 	bSizerTitle->Add( 0, 0, 1, wxEXPAND, 5 );
-	
+
 	m_bitmapApp = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
 	bSizerTitle->Add( m_bitmapApp, 1, wxALIGN_CENTER|wxALL, 5 );
-	
+
 	wxBoxSizer* b_apptitleSizer;
 	b_apptitleSizer = new wxBoxSizer( wxVERTICAL );
-	
-	m_staticTextAppTitle = new wxStaticText( this, wxID_ANY, _("App Title"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTRE );
+
+	m_staticTextAppTitle = new wxStaticText( this, wxID_ANY, _("App Title"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTER_HORIZONTAL );
 	m_staticTextAppTitle->Wrap( -1 );
 	m_staticTextAppTitle->SetFont( wxFont( 14, wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_BOLD, false, wxEmptyString ) );
-	
+
 	b_apptitleSizer->Add( m_staticTextAppTitle, 0, wxALIGN_CENTER|wxALL, 5 );
-	
-	m_staticTextCopyright = new wxStaticText( this, wxID_ANY, _("Copyright Info"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTRE );
+
+	m_staticTextCopyright = new wxStaticText( this, wxID_ANY, _("Copyright Info"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTER_HORIZONTAL );
 	m_staticTextCopyright->Wrap( -1 );
 	b_apptitleSizer->Add( m_staticTextCopyright, 0, wxALIGN_CENTER|wxALL, 1 );
-	
-	m_staticTextBuildVersion = new wxStaticText( this, wxID_ANY, _("Build Version Info"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTRE );
+
+	m_staticTextBuildVersion = new wxStaticText( this, wxID_ANY, _("Build Version Info"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTER_HORIZONTAL );
 	m_staticTextBuildVersion->Wrap( -1 );
 	b_apptitleSizer->Add( m_staticTextBuildVersion, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT|wxTOP, 5 );
-	
-	m_staticTextLibVersion = new wxStaticText( this, wxID_ANY, _("Lib Version Info"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTRE );
+
+	m_staticTextLibVersion = new wxStaticText( this, wxID_ANY, _("Lib Version Info"), wxDefaultPosition, wxDefaultSize, wxALIGN_CENTER_HORIZONTAL );
 	m_staticTextLibVersion->Wrap( -1 );
 	b_apptitleSizer->Add( m_staticTextLibVersion, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT|wxTOP, 5 );
-	
-	
+
+
 	bSizerTitle->Add( b_apptitleSizer, 10, wxALL|wxEXPAND, 5 );
-	
-	
+
+
 	bSizerTitle->Add( 0, 0, 2, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerMain->Add( bSizerTitle, 0, wxEXPAND, 5 );
-	
+
 	m_auiNotebook = new wxAuiNotebook( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxAUI_NB_SCROLL_BUTTONS|wxAUI_NB_TAB_FIXED_WIDTH );
 	m_auiNotebook->SetMinSize( wxSize( 750,350 ) );
-	
-	
+
+
 	bSizerMain->Add( m_auiNotebook, 2, wxALL|wxEXPAND, 5 );
-	
+
 	wxBoxSizer* bSizerButtons;
 	bSizerButtons = new wxBoxSizer( wxHORIZONTAL );
-	
-	m_btShowVersionInfo = new wxButton( this, wxID_COPY, _("Show Version Info"), wxDefaultPosition, wxDefaultSize, 0 );
+
+	m_btShowVersionInfo = new wxButton( this, wxID_COPY, _("&Show Version Info"), wxDefaultPosition, wxDefaultSize, 0 );
 	bSizerButtons->Add( m_btShowVersionInfo, 0, wxALL, 5 );
-	
-	m_btCopyVersionInfo = new wxButton( this, wxID_COPY, _("Copy Version Info"), wxDefaultPosition, wxDefaultSize, 0 );
+
+	m_btCopyVersionInfo = new wxButton( this, wxID_COPY, _("&Copy Version Info"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_btCopyVersionInfo->SetToolTip( _("Copy KiCad version info to the clipboard") );
-	
+
 	bSizerButtons->Add( m_btCopyVersionInfo, 0, wxALL, 5 );
-	
-	m_btOk = new wxButton( this, wxID_OK, _("OK"), wxDefaultPosition, wxDefaultSize, 0 );
-	m_btOk->SetDefault(); 
+
+	m_btOk = new wxButton( this, wxID_OK, _("&OK"), wxDefaultPosition, wxDefaultSize, 0 );
+
+	m_btOk->SetDefault();
 	bSizerButtons->Add( m_btOk, 0, wxALL, 5 );
-	
-	
+
+
 	bSizerMain->Add( bSizerButtons, 0, wxALIGN_RIGHT|wxRIGHT|wxLEFT, 5 );
-	
-	
+
+
 	this->SetSizer( bSizerMain );
 	this->Layout();
-	
+
 	// Connect Events
 	m_btShowVersionInfo->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_ABOUT_BASE::onShowVersionInfo ), NULL, this );
 	m_btCopyVersionInfo->Connect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_ABOUT_BASE::onCopyVersionInfo ), NULL, this );
@@ -93,5 +94,5 @@ DIALOG_ABOUT_BASE::~DIALOG_ABOUT_BASE()
 	// Disconnect Events
 	m_btShowVersionInfo->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_ABOUT_BASE::onShowVersionInfo ), NULL, this );
 	m_btCopyVersionInfo->Disconnect( wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler( DIALOG_ABOUT_BASE::onCopyVersionInfo ), NULL, this );
-	
+
 }

common/dialog_about/dialog_about_base.fbp

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
 <wxFormBuilder_Project>
-    <FileVersion major="1" minor="13" />
+    <FileVersion major="1" minor="15" />
     <object class="Project" expanded="1">
         <property name="class_decoration"></property>
         <property name="code_generation">C++</property>
@@ -14,6 +14,8 @@
         <property name="file">dialog_about_base</property>
         <property name="first_id">1000</property>
         <property name="help_provider">none</property>
+        <property name="image_path_wrapper_function_name"></property>
+        <property name="indent_with_spaces"></property>
         <property name="internationalize">1</property>
         <property name="name">MyProject</property>
         <property name="namespace"></property>
@@ -24,6 +26,7 @@
         <property name="skip_php_events">1</property>
         <property name="skip_python_events">1</property>
         <property name="ui_table">UI</property>
+        <property name="use_array_enum">0</property>
         <property name="use_enum">1</property>
         <property name="use_microsoft_bom">0</property>
         <object class="Dialog" expanded="1">
@@ -52,42 +55,6 @@
             <property name="window_extra_style"></property>
             <property name="window_name"></property>
             <property name="window_style"></property>
-            <event name="OnActivate"></event>
-            <event name="OnActivateApp"></event>
-            <event name="OnAuiFindManager"></event>
-            <event name="OnAuiPaneButton"></event>
-            <event name="OnAuiPaneClose"></event>
-            <event name="OnAuiPaneMaximize"></event>
-            <event name="OnAuiPaneRestore"></event>
-            <event name="OnAuiRender"></event>
-            <event name="OnChar"></event>
-            <event name="OnClose"></event>
-            <event name="OnEnterWindow"></event>
-            <event name="OnEraseBackground"></event>
-            <event name="OnHibernate"></event>
-            <event name="OnIconize"></event>
-            <event name="OnIdle"></event>
-            <event name="OnInitDialog"></event>
-            <event name="OnKeyDown"></event>
-            <event name="OnKeyUp"></event>
-            <event name="OnKillFocus"></event>
-            <event name="OnLeaveWindow"></event>
-            <event name="OnLeftDClick"></event>
-            <event name="OnLeftDown"></event>
-            <event name="OnLeftUp"></event>
-            <event name="OnMiddleDClick"></event>
-            <event name="OnMiddleDown"></event>
-            <event name="OnMiddleUp"></event>
-            <event name="OnMotion"></event>
-            <event name="OnMouseEvents"></event>
-            <event name="OnMouseWheel"></event>
-            <event name="OnPaint"></event>
-            <event name="OnRightDClick"></event>
-            <event name="OnRightDown"></event>
-            <event name="OnRightUp"></event>
-            <event name="OnSetFocus"></event>
-            <event name="OnSize"></event>
-            <event name="OnUpdateUI"></event>
             <object class="wxBoxSizer" expanded="1">
                 <property name="minimum_size"></property>
                 <property name="name">bSizerMain</property>
@@ -168,29 +135,6 @@
                                 <property name="window_extra_style"></property>
                                 <property name="window_name"></property>
                                 <property name="window_style"></property>
-                                <event name="OnChar"></event>
-                                <event name="OnEnterWindow"></event>
-                                <event name="OnEraseBackground"></event>
-                                <event name="OnKeyDown"></event>
-                                <event name="OnKeyUp"></event>
-                                <event name="OnKillFocus"></event>
-                                <event name="OnLeaveWindow"></event>
-                                <event name="OnLeftDClick"></event>
-                                <event name="OnLeftDown"></event>
-                                <event name="OnLeftUp"></event>
-                                <event name="OnMiddleDClick"></event>
-                                <event name="OnMiddleDown"></event>
-                                <event name="OnMiddleUp"></event>
-                                <event name="OnMotion"></event>
-                                <event name="OnMouseEvents"></event>
-                                <event name="OnMouseWheel"></event>
-                                <event name="OnPaint"></event>
-                                <event name="OnRightDClick"></event>
-                                <event name="OnRightDown"></event>
-                                <event name="OnRightUp"></event>
-                                <event name="OnSetFocus"></event>
-                                <event name="OnSize"></event>
-                                <event name="OnUpdateUI"></event>
                             </object>
                         </object>
                         <object class="sizeritem" expanded="1">
@@ -235,6 +179,7 @@
                                         <property name="hidden">0</property>
                                         <property name="id">wxID_ANY</property>
                                         <property name="label">App Title</property>
+                                        <property name="markup">0</property>
                                         <property name="max_size"></property>
                                         <property name="maximize_button">0</property>
                                         <property name="maximum_size"></property>
@@ -252,7 +197,7 @@
                                         <property name="resize">Resizable</property>
                                         <property name="show">1</property>
                                         <property name="size"></property>
-                                        <property name="style">wxALIGN_CENTRE</property>
+                                        <property name="style">wxALIGN_CENTER_HORIZONTAL</property>
                                         <property name="subclass"></property>
                                         <property name="toolbar_pane">0</property>
                                         <property name="tooltip"></property>
@@ -260,29 +205,6 @@
                                         <property name="window_name"></property>
                                         <property name="window_style"></property>
                                         <property name="wrap">-1</property>
-                                        <event name="OnChar"></event>
-                                        <event name="OnEnterWindow"></event>
-                                        <event name="OnEraseBackground"></event>
-                                        <event name="OnKeyDown"></event>
-                                        <event name="OnKeyUp"></event>
-                                        <event name="OnKillFocus"></event>
-                                        <event name="OnLeaveWindow"></event>
-                                        <event name="OnLeftDClick"></event>
-                                        <event name="OnLeftDown"></event>
-                                        <event name="OnLeftUp"></event>
-                                        <event name="OnMiddleDClick"></event>
-                                        <event name="OnMiddleDown"></event>
-                                        <event name="OnMiddleUp"></event>
-                                        <event name="OnMotion"></event>
-                                        <event name="OnMouseEvents"></event>
-                                        <event name="OnMouseWheel"></event>
-                                        <event name="OnPaint"></event>
-                                        <event name="OnRightDClick"></event>
-                                        <event name="OnRightDown"></event>
-                                        <event name="OnRightUp"></event>
-                                        <event name="OnSetFocus"></event>
-                                        <event name="OnSize"></event>
-                                        <event name="OnUpdateUI"></event>
                                     </object>
                                 </object>
                                 <object class="sizeritem" expanded="0">
@@ -318,6 +240,7 @@
                                         <property name="hidden">0</property>
                                         <property name="id">wxID_ANY</property>
                                         <property name="label">Copyright Info</property>
+                                        <property name="markup">0</property>
                                         <property name="max_size"></property>
                                         <property name="maximize_button">0</property>
                                         <property name="maximum_size"></property>
@@ -335,7 +258,7 @@
                                         <property name="resize">Resizable</property>
                                         <property name="show">1</property>
                                         <property name="size"></property>
-                                        <property name="style">wxALIGN_CENTRE</property>
+                                        <property name="style">wxALIGN_CENTER_HORIZONTAL</property>
                                         <property name="subclass"></property>
                                         <property name="toolbar_pane">0</property>
                                         <property name="tooltip"></property>
@@ -343,29 +266,6 @@
                                         <property name="window_name"></property>
                                         <property name="window_style"></property>
                                         <property name="wrap">-1</property>
-                                        <event name="OnChar"></event>
-                                        <event name="OnEnterWindow"></event>
-                                        <event name="OnEraseBackground"></event>
-                                        <event name="OnKeyDown"></event>
-                                        <event name="OnKeyUp"></event>
-                                        <event name="OnKillFocus"></event>
-                                        <event name="OnLeaveWindow"></event>
-                                        <event name="OnLeftDClick"></event>
-                                        <event name="OnLeftDown"></event>
-                                        <event name="OnLeftUp"></event>
-                                        <event name="OnMiddleDClick"></event>
-                                        <event name="OnMiddleDown"></event>
-                                        <event name="OnMiddleUp"></event>
-                                        <event name="OnMotion"></event>
-                                        <event name="OnMouseEvents"></event>
-                                        <event name="OnMouseWheel"></event>
-                                        <event name="OnPaint"></event>
-                                        <event name="OnRightDClick"></event>
-                                        <event name="OnRightDown"></event>
-                                        <event name="OnRightUp"></event>
-                                        <event name="OnSetFocus"></event>
-                                        <event name="OnSize"></event>
-                                        <event name="OnUpdateUI"></event>
                                     </object>
                                 </object>
                                 <object class="sizeritem" expanded="0">
@@ -401,6 +301,7 @@
                                         <property name="hidden">0</property>
                                         <property name="id">wxID_ANY</property>
                                         <property name="label">Build Version Info</property>
+                                        <property name="markup">0</property>
                                         <property name="max_size"></property>
                                         <property name="maximize_button">0</property>
                                         <property name="maximum_size"></property>
@@ -418,7 +319,7 @@
                                         <property name="resize">Resizable</property>
                                         <property name="show">1</property>
                                         <property name="size"></property>
-                                        <property name="style">wxALIGN_CENTRE</property>
+                                        <property name="style">wxALIGN_CENTER_HORIZONTAL</property>
                                         <property name="subclass"></property>
                                         <property name="toolbar_pane">0</property>
                                         <property name="tooltip"></property>
@@ -426,29 +327,6 @@
                                         <property name="window_name"></property>
                                         <property name="window_style"></property>
                                         <property name="wrap">-1</property>
-                                        <event name="OnChar"></event>
-                                        <event name="OnEnterWindow"></event>
-                                        <event name="OnEraseBackground"></event>
-                                        <event name="OnKeyDown"></event>
-                                        <event name="OnKeyUp"></event>
-                                        <event name="OnKillFocus"></event>
-                                        <event name="OnLeaveWindow"></event>
-                                        <event name="OnLeftDClick"></event>
-                                        <event name="OnLeftDown"></event>
-                                        <event name="OnLeftUp"></event>
-                                        <event name="OnMiddleDClick"></event>
-                                        <event name="OnMiddleDown"></event>
-                                        <event name="OnMiddleUp"></event>
-                                        <event name="OnMotion"></event>
-                                        <event name="OnMouseEvents"></event>
-                                        <event name="OnMouseWheel"></event>
-                                        <event name="OnPaint"></event>
-                                        <event name="OnRightDClick"></event>
-                                        <event name="OnRightDown"></event>
-                                        <event name="OnRightUp"></event>
-                                        <event name="OnSetFocus"></event>
-                                        <event name="OnSize"></event>
-                                        <event name="OnUpdateUI"></event>
                                     </object>
                                 </object>
                                 <object class="sizeritem" expanded="0">
@@ -484,6 +362,7 @@
                                         <property name="hidden">0</property>
                                         <property name="id">wxID_ANY</property>
                                         <property name="label">Lib Version Info</property>
+                                        <property name="markup">0</property>
                                         <property name="max_size"></property>
                                         <property name="maximize_button">0</property>
                                         <property name="maximum_size"></property>
@@ -501,7 +380,7 @@
                                         <property name="resize">Resizable</property>
                                         <property name="show">1</property>
                                         <property name="size"></property>
-                                        <property name="style">wxALIGN_CENTRE</property>
+                                        <property name="style">wxALIGN_CENTER_HORIZONTAL</property>
                                         <property name="subclass"></property>
                                         <property name="toolbar_pane">0</property>
                                         <property name="tooltip"></property>
@@ -509,29 +388,6 @@
                                         <property name="window_name"></property>
                                         <property name="window_style"></property>
                                         <property name="wrap">-1</property>
-                                        <event name="OnChar"></event>
-                                        <event name="OnEnterWindow"></event>
-                                        <event name="OnEraseBackground"></event>
-                                        <event name="OnKeyDown"></event>
-                                        <event name="OnKeyUp"></event>
-                                        <event name="OnKillFocus"></event>
-                                        <event name="OnLeaveWindow"></event>
-                                        <event name="OnLeftDClick"></event>
-                                        <event name="OnLeftDown"></event>
-                                        <event name="OnLeftUp"></event>
-                                        <event name="OnMiddleDClick"></event>
-                                        <event name="OnMiddleDown"></event>
-                                        <event name="OnMiddleUp"></event>
-                                        <event name="OnMotion"></event>
-                                        <event name="OnMouseEvents"></event>
-                                        <event name="OnMouseWheel"></event>
-                                        <event name="OnPaint"></event>
-                                        <event name="OnRightDClick"></event>
-                                        <event name="OnRightDown"></event>
-                                        <event name="OnRightUp"></event>
-                                        <event name="OnSetFocus"></event>
-                                        <event name="OnSize"></event>
-                                        <event name="OnUpdateUI"></event>
                                     </object>
                                 </object>
                             </object>
@@ -606,37 +462,6 @@
                         <property name="window_extra_style"></property>
                         <property name="window_name"></property>
                         <property name="window_style"></property>
-                        <event name="OnAuiNotebookAllowDND"></event>
-                        <event name="OnAuiNotebookBeginDrag"></event>
-                        <event name="OnAuiNotebookButton"></event>
-                        <event name="OnAuiNotebookDragMotion"></event>
-                        <event name="OnAuiNotebookEndDrag"></event>
-                        <event name="OnAuiNotebookPageChanged"></event>
-                        <event name="OnAuiNotebookPageChanging"></event>
-                        <event name="OnAuiNotebookPageClose"></event>
-                        <event name="OnChar"></event>
-                        <event name="OnEnterWindow"></event>
-                        <event name="OnEraseBackground"></event>
-                        <event name="OnKeyDown"></event>
-                        <event name="OnKeyUp"></event>
-                        <event name="OnKillFocus"></event>
-                        <event name="OnLeaveWindow"></event>
-                        <event name="OnLeftDClick"></event>
-                        <event name="OnLeftDown"></event>
-                        <event name="OnLeftUp"></event>
-                        <event name="OnMiddleDClick"></event>
-                        <event name="OnMiddleDown"></event>
-                        <event name="OnMiddleUp"></event>
-                        <event name="OnMotion"></event>
-                        <event name="OnMouseEvents"></event>
-                        <event name="OnMouseWheel"></event>
-                        <event name="OnPaint"></event>
-                        <event name="OnRightDClick"></event>
-                        <event name="OnRightDown"></event>
-                        <event name="OnRightUp"></event>
-                        <event name="OnSetFocus"></event>
-                        <event name="OnSize"></event>
-                        <event name="OnUpdateUI"></event>
                     </object>
                 </object>
                 <object class="sizeritem" expanded="1">
@@ -663,25 +488,31 @@
                                 <property name="aui_row"></property>
                                 <property name="best_size"></property>
                                 <property name="bg"></property>
+                                <property name="bitmap"></property>
                                 <property name="caption"></property>
                                 <property name="caption_visible">1</property>
                                 <property name="center_pane">0</property>
                                 <property name="close_button">1</property>
                                 <property name="context_help"></property>
                                 <property name="context_menu">1</property>
+                                <property name="current"></property>
                                 <property name="default">0</property>
                                 <property name="default_pane">0</property>
+                                <property name="disabled"></property>
                                 <property name="dock">Dock</property>
                                 <property name="dock_fixed">0</property>
                                 <property name="docking">Left</property>
                                 <property name="enabled">1</property>
                                 <property name="fg"></property>
                                 <property name="floatable">1</property>
+                                <property name="focus"></property>
                                 <property name="font"></property>
                                 <property name="gripper">0</property>
                                 <property name="hidden">0</property>
                                 <property name="id">wxID_COPY</property>
-                                <property name="label">Show Version Info</property>
+                                <property name="label">&amp;Show Version Info</property>
+                                <property name="margins"></property>
+                                <property name="markup">0</property>
                                 <property name="max_size"></property>
                                 <property name="maximize_button">0</property>
                                 <property name="maximum_size"></property>
@@ -696,6 +527,8 @@
                                 <property name="permission">protected</property>
                                 <property name="pin_button">1</property>
                                 <property name="pos"></property>
+                                <property name="position"></property>
+                                <property name="pressed"></property>
                                 <property name="resize">Resizable</property>
                                 <property name="show">1</property>
                                 <property name="size"></property>
@@ -711,29 +544,6 @@
                                 <property name="window_name"></property>
                                 <property name="window_style"></property>
                                 <event name="OnButtonClick">onShowVersionInfo</event>
-                                <event name="OnChar"></event>
-                                <event name="OnEnterWindow"></event>
-                                <event name="OnEraseBackground"></event>
-                                <event name="OnKeyDown"></event>
-                                <event name="OnKeyUp"></event>
-                                <event name="OnKillFocus"></event>
-                                <event name="OnLeaveWindow"></event>
-                                <event name="OnLeftDClick"></event>
-                                <event name="OnLeftDown"></event>
-                                <event name="OnLeftUp"></event>
-                                <event name="OnMiddleDClick"></event>
-                                <event name="OnMiddleDown"></event>
-                                <event name="OnMiddleUp"></event>
-                                <event name="OnMotion"></event>
-                                <event name="OnMouseEvents"></event>
-                                <event name="OnMouseWheel"></event>
-                                <event name="OnPaint"></event>
-                                <event name="OnRightDClick"></event>
-                                <event name="OnRightDown"></event>
-                                <event name="OnRightUp"></event>
-                                <event name="OnSetFocus"></event>
-                                <event name="OnSize"></event>
-                                <event name="OnUpdateUI"></event>
                             </object>
                         </object>
                         <object class="sizeritem" expanded="0">
@@ -751,25 +561,31 @@
                                 <property name="aui_row"></property>
                                 <property name="best_size"></property>
                                 <property name="bg"></property>
+                                <property name="bitmap"></property>
                                 <property name="caption"></property>
                                 <property name="caption_visible">1</property>
                                 <property name="center_pane">0</property>
                                 <property name="close_button">1</property>
                                 <property name="context_help"></property>
                                 <property name="context_menu">1</property>
+                                <property name="current"></property>
                                 <property name="default">0</property>
                                 <property name="default_pane">0</property>
+                                <property name="disabled"></property>
                                 <property name="dock">Dock</property>
                                 <property name="dock_fixed">0</property>
                                 <property name="docking">Left</property>
                                 <property name="enabled">1</property>
                                 <property name="fg"></property>
                                 <property name="floatable">1</property>
+                                <property name="focus"></property>
                                 <property name="font"></property>
                                 <property name="gripper">0</property>
                                 <property name="hidden">0</property>
                                 <property name="id">wxID_COPY</property>
-                                <property name="label">Copy Version Info</property>
+                                <property name="label">&amp;Copy Version Info</property>
+                                <property name="margins"></property>
+                                <property name="markup">0</property>
                                 <property name="max_size"></property>
                                 <property name="maximize_button">0</property>
                                 <property name="maximum_size"></property>
@@ -784,6 +600,8 @@
                                 <property name="permission">protected</property>
                                 <property name="pin_button">1</property>
                                 <property name="pos"></property>
+                                <property name="position"></property>
+                                <property name="pressed"></property>
                                 <property name="resize">Resizable</property>
                                 <property name="show">1</property>
                                 <property name="size"></property>
@@ -799,29 +617,6 @@
                                 <property name="window_name"></property>
                                 <property name="window_style"></property>
                                 <event name="OnButtonClick">onCopyVersionInfo</event>
-                                <event name="OnChar"></event>
-                                <event name="OnEnterWindow"></event>
-                                <event name="OnEraseBackground"></event>
-                                <event name="OnKeyDown"></event>
-                                <event name="OnKeyUp"></event>
-                                <event name="OnKillFocus"></event>
-                                <event name="OnLeaveWindow"></event>
-                                <event name="OnLeftDClick"></event>
-                                <event name="OnLeftDown"></event>
-                                <event name="OnLeftUp"></event>
-                                <event name="OnMiddleDClick"></event>
-                                <event name="OnMiddleDown"></event>
-                                <event name="OnMiddleUp"></event>
-                                <event name="OnMotion"></event>
-                                <event name="OnMouseEvents"></event>
-                                <event name="OnMouseWheel"></event>
-                                <event name="OnPaint"></event>
-                                <event name="OnRightDClick"></event>
-                                <event name="OnRightDown"></event>
-                                <event name="OnRightUp"></event>
-                                <event name="OnSetFocus"></event>
-                                <event name="OnSize"></event>
-                                <event name="OnUpdateUI"></event>
                             </object>
                         </object>
                         <object class="sizeritem" expanded="0">
@@ -839,25 +634,31 @@
                                 <property name="aui_row"></property>
                                 <property name="best_size"></property>
                                 <property name="bg"></property>
+                                <property name="bitmap"></property>
                                 <property name="caption"></property>
                                 <property name="caption_visible">1</property>
                                 <property name="center_pane">0</property>
                                 <property name="close_button">1</property>
                                 <property name="context_help"></property>
                                 <property name="context_menu">1</property>
+                                <property name="current"></property>
                                 <property name="default">1</property>
                                 <property name="default_pane">0</property>
+                                <property name="disabled"></property>
                                 <property name="dock">Dock</property>
                                 <property name="dock_fixed">0</property>
                                 <property name="docking">Left</property>
                                 <property name="enabled">1</property>
                                 <property name="fg"></property>
                                 <property name="floatable">1</property>
+                                <property name="focus"></property>
                                 <property name="font"></property>
                                 <property name="gripper">0</property>
                                 <property name="hidden">0</property>
                                 <property name="id">wxID_OK</property>
-                                <property name="label">OK</property>
+                                <property name="label">&amp;OK</property>
+                                <property name="margins"></property>
+                                <property name="markup">0</property>
                                 <property name="max_size"></property>
                                 <property name="maximize_button">0</property>
                                 <property name="maximum_size"></property>
@@ -872,6 +673,8 @@
                                 <property name="permission">protected</property>
                                 <property name="pin_button">1</property>
                                 <property name="pos"></property>
+                                <property name="position"></property>
+                                <property name="pressed"></property>
                                 <property name="resize">Resizable</property>
                                 <property name="show">1</property>
                                 <property name="size"></property>
@@ -886,30 +689,6 @@
                                 <property name="window_extra_style"></property>
                                 <property name="window_name"></property>
                                 <property name="window_style"></property>
-                                <event name="OnButtonClick"></event>
-                                <event name="OnChar"></event>
-                                <event name="OnEnterWindow"></event>
-                                <event name="OnEraseBackground"></event>
-                                <event name="OnKeyDown"></event>
-                                <event name="OnKeyUp"></event>
-                                <event name="OnKillFocus"></event>
-                                <event name="OnLeaveWindow"></event>
-                                <event name="OnLeftDClick"></event>
-                                <event name="OnLeftDown"></event>
-                                <event name="OnLeftUp"></event>
-                                <event name="OnMiddleDClick"></event>
-                                <event name="OnMiddleDown"></event>
-                                <event name="OnMiddleUp"></event>
-                                <event name="OnMotion"></event>
-                                <event name="OnMouseEvents"></event>
-                                <event name="OnMouseWheel"></event>
-                                <event name="OnPaint"></event>
-                                <event name="OnRightDClick"></event>
-                                <event name="OnRightDown"></event>
-                                <event name="OnRightUp"></event>
-                                <event name="OnSetFocus"></event>
-                                <event name="OnSize"></event>
-                                <event name="OnUpdateUI"></event>
                             </object>
                         </object>
                     </object>

common/dialog_about/dialog_about_base.h

@@ -1,12 +1,11 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version May  6 2016)
+// C++ code generated with wxFormBuilder (version Mar 28 2019)
 // http://www.wxformbuilder.org/
 //
-// PLEASE DO "NOT" EDIT THIS FILE!
+// PLEASE DO *NOT* EDIT THIS FILE!
 ///////////////////////////////////////////////////////////////////////////
 
-#ifndef __DIALOG_ABOUT_BASE_H__
-#define __DIALOG_ABOUT_BASE_H__
+#pragma once
 
 #include <wx/artprov.h>
 #include <wx/xrc/xmlres.h>
@@ -31,10 +30,10 @@
 ///////////////////////////////////////////////////////////////////////////////
 /// Class DIALOG_ABOUT_BASE
 ///////////////////////////////////////////////////////////////////////////////
-class DIALOG_ABOUT_BASE : public wxDialog 
+class DIALOG_ABOUT_BASE : public wxDialog
 {
 	private:
-	
+
 	protected:
 		wxStaticBitmap* m_bitmapApp;
 		wxStaticText* m_staticTextAppTitle;
@@ -45,17 +44,16 @@ class DIALOG_ABOUT_BASE : public wxDialog
 		wxButton* m_btShowVersionInfo;
 		wxButton* m_btCopyVersionInfo;
 		wxButton* m_btOk;
-		
+
 		// Virtual event handlers, overide them in your derived class
 		virtual void onShowVersionInfo( wxCommandEvent& event ) { event.Skip(); }
 		virtual void onCopyVersionInfo( wxCommandEvent& event ) { event.Skip(); }
-		
-	
+
+
 	public:
-		
-		DIALOG_ABOUT_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("About"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 750,471 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER ); 
+
+		DIALOG_ABOUT_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("About"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 750,471 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
 		~DIALOG_ABOUT_BASE();
-	
+
 };
 
-#endif //__DIALOG_ABOUT_BASE_H__

common/dialog_shim.cpp

@@ -26,6 +26,7 @@
 #include <kiway_player.h>
 #include <wx/evtloop.h>
 #include <pgm_base.h>
+#include <tool/tool_manager.h>
 #include <eda_rect.h>
 #include <wx/display.h>
 #include <wx/grid.h>
@@ -92,6 +93,12 @@ DIALOG_SHIM::DIALOG_SHIM( wxWindow* aParent, wxWindowID id, const wxString& titl
         // Inherit units from parent
         m_units = kiwayHolder->GetUserUnits();
 
+        // Don't mouse-warp after a dialog run from the context menu
+        TOOL_MANAGER* toolMgr = kiwayHolder->GetToolManager();
+
+        if( toolMgr )
+            toolMgr->VetoContextMenuMouseWarp();
+
         // Set up the message bus
         SetKiway( this, &kiwayHolder->Kiway() );
     }
@@ -434,10 +441,15 @@ void DIALOG_SHIM::OnCloseWindow( wxCloseEvent& aEvent )
 
 void DIALOG_SHIM::OnButton( wxCommandEvent& aEvent )
 {
+    const int id = aEvent.GetId();
+
+    // If we are pressing a button to exit, we need to enable the escapeID
+    // otherwise the dialog does not process cancel
+    if( id == wxID_CANCEL )
+        SetEscapeId( wxID_ANY );
+
     if( IsQuasiModal() )
     {
-        const int id = aEvent.GetId();
-
         if( id == GetAffirmativeId() )
         {
             EndQuasiModal( id );

common/dialogs/dialog_color_picker.cpp

@@ -23,6 +23,18 @@
 
 #define ALPHA_MAX 100   // the max value returned by the alpha (opacity) slider
 
+
+// Configure the spin controls contained inside the dialog
+void configureSpinCtrl( wxSpinCtrl* aCtrl )
+{
+    wxSize textLength = aCtrl->GetTextExtent( "999" );
+    wxSize ctrlSize   = aCtrl->GetSizeFromTextSize( textLength );
+
+    aCtrl->SetMinSize( ctrlSize );
+    aCtrl->SetSize( ctrlSize );
+}
+
+
 DIALOG_COLOR_PICKER::DIALOG_COLOR_PICKER( wxWindow* aParent, KIGFX::COLOR4D& aCurrentColor,
                                           bool aAllowOpacityControl, CUSTOM_COLORS_LIST* aUserColors )
 	: DIALOG_COLOR_PICKER_BASE( aParent )
@@ -131,6 +143,13 @@ bool DIALOG_COLOR_PICKER::TransferDataToWindow()
     SetEditVals( ALL_CHANGED );
     drawAll();
 
+    // Configure the spin control sizes
+    configureSpinCtrl( m_spinCtrlGreen );
+    configureSpinCtrl( m_spinCtrlBlue );
+    configureSpinCtrl( m_spinCtrlRed );
+    configureSpinCtrl( m_spinCtrlHue );
+    configureSpinCtrl( m_spinCtrlSaturation );
+
     m_notebook->GetPage( 0 )->Layout();
     m_notebook->GetPage( 1 )->Layout();
 

common/dialogs/dialog_color_picker_base.cpp

@@ -1,5 +1,5 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jul 11 2018)
+// C++ code generated with wxFormBuilder (version Oct 26 2018)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
@@ -12,29 +12,29 @@
 DIALOG_COLOR_PICKER_BASE::DIALOG_COLOR_PICKER_BASE( wxWindow* parent, wxWindowID id, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : DIALOG_SHIM( parent, id, title, pos, size, style )
 {
 	this->SetSizeHints( wxDefaultSize, wxDefaultSize );
-	
+
 	wxBoxSizer* bSizerMain;
 	bSizerMain = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxBoxSizer* bSizerUpperMain;
 	bSizerUpperMain = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	m_notebook = new wxNotebook( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, 0 );
 	m_panelFreeColors = new wxPanel( m_notebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
 	wxBoxSizer* bSizerUpperFreeColors;
 	bSizerUpperFreeColors = new wxBoxSizer( wxVERTICAL );
-	
+
 	wxBoxSizer* bSizerPanels;
 	bSizerPanels = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	wxStaticBoxSizer* sbSizerViewRGB;
 	sbSizerViewRGB = new wxStaticBoxSizer( new wxStaticBox( m_panelFreeColors, wxID_ANY, _("RGB") ), wxVERTICAL );
-	
+
 	m_RgbBitmap = new wxStaticBitmap( sbSizerViewRGB->GetStaticBox(), wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 264,264 ), 0 );
 	m_RgbBitmap->SetMinSize( wxSize( 264,264 ) );
-	
+
 	sbSizerViewRGB->Add( m_RgbBitmap, 0, wxALL|wxALIGN_CENTER_HORIZONTAL, 5 );
-	
+
 	wxFlexGridSizer* fgSizerRGB;
 	fgSizerRGB = new wxFlexGridSizer( 0, 3, 0, 0 );
 	fgSizerRGB->AddGrowableCol( 0 );
@@ -42,109 +42,99 @@ DIALOG_COLOR_PICKER_BASE::DIALOG_COLOR_PICKER_BASE( wxWindow* parent, wxWindowID
 	fgSizerRGB->AddGrowableCol( 2 );
 	fgSizerRGB->SetFlexibleDirection( wxBOTH );
 	fgSizerRGB->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
+
 	m_staticTextR = new wxStaticText( sbSizerViewRGB->GetStaticBox(), wxID_ANY, _("Red:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextR->Wrap( -1 );
 	fgSizerRGB->Add( m_staticTextR, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_staticTextG = new wxStaticText( sbSizerViewRGB->GetStaticBox(), wxID_ANY, _("Green:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextG->Wrap( -1 );
 	fgSizerRGB->Add( m_staticTextG, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_staticTextB = new wxStaticText( sbSizerViewRGB->GetStaticBox(), wxID_ANY, _("Blue:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextB->Wrap( -1 );
 	fgSizerRGB->Add( m_staticTextB, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_spinCtrlRed = new wxSpinCtrl( sbSizerViewRGB->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 255, 128 );
-	m_spinCtrlRed->SetMinSize( wxSize( 80,-1 ) );
-	
 	fgSizerRGB->Add( m_spinCtrlRed, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_spinCtrlGreen = new wxSpinCtrl( sbSizerViewRGB->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 255, 128 );
-	m_spinCtrlGreen->SetMinSize( wxSize( 80,-1 ) );
-	
 	fgSizerRGB->Add( m_spinCtrlGreen, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_spinCtrlBlue = new wxSpinCtrl( sbSizerViewRGB->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 255, 128 );
-	m_spinCtrlBlue->SetMinSize( wxSize( 80,-1 ) );
-	
 	fgSizerRGB->Add( m_spinCtrlBlue, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
-	
+
+
 	sbSizerViewRGB->Add( fgSizerRGB, 0, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerPanels->Add( sbSizerViewRGB, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	wxStaticBoxSizer* sbSizerViewHSV;
 	sbSizerViewHSV = new wxStaticBoxSizer( new wxStaticBox( m_panelFreeColors, wxID_ANY, _("HSV") ), wxHORIZONTAL );
-	
+
 	wxBoxSizer* bSizer10;
 	bSizer10 = new wxBoxSizer( wxVERTICAL );
-	
+
 	m_HsvBitmap = new wxStaticBitmap( sbSizerViewHSV->GetStaticBox(), wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( 264,264 ), 0 );
 	m_HsvBitmap->SetMinSize( wxSize( 264,264 ) );
-	
+
 	bSizer10->Add( m_HsvBitmap, 0, wxALL|wxALIGN_CENTER_HORIZONTAL, 5 );
-	
+
 	wxFlexGridSizer* fgSizerHSV;
 	fgSizerHSV = new wxFlexGridSizer( 0, 2, 0, 0 );
 	fgSizerHSV->AddGrowableCol( 0 );
 	fgSizerHSV->AddGrowableCol( 1 );
 	fgSizerHSV->SetFlexibleDirection( wxBOTH );
 	fgSizerHSV->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
+
 	m_staticTextHue = new wxStaticText( sbSizerViewHSV->GetStaticBox(), wxID_ANY, _("Hue:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextHue->Wrap( -1 );
 	fgSizerHSV->Add( m_staticTextHue, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_staticTextSat = new wxStaticText( sbSizerViewHSV->GetStaticBox(), wxID_ANY, _("Saturation:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextSat->Wrap( -1 );
 	fgSizerHSV->Add( m_staticTextSat, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_spinCtrlHue = new wxSpinCtrl( sbSizerViewHSV->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS|wxSP_WRAP, 0, 359, 0 );
-	m_spinCtrlHue->SetMinSize( wxSize( 80,-1 ) );
-	
 	fgSizerHSV->Add( m_spinCtrlHue, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_spinCtrlSaturation = new wxSpinCtrl( sbSizerViewHSV->GetStaticBox(), wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 255, 128 );
-	m_spinCtrlSaturation->SetMinSize( wxSize( 80,-1 ) );
-	
 	fgSizerHSV->Add( m_spinCtrlSaturation, 0, wxEXPAND|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
-	
+
+
 	bSizer10->Add( fgSizerHSV, 0, wxEXPAND, 5 );
-	
-	
+
+
 	sbSizerViewHSV->Add( bSizer10, 0, wxEXPAND, 5 );
-	
+
 	wxBoxSizer* bSizerBright;
 	bSizerBright = new wxBoxSizer( wxVERTICAL );
-	
+
 	m_staticTextBright = new wxStaticText( sbSizerViewHSV->GetStaticBox(), wxID_ANY, _("Value:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextBright->Wrap( -1 );
 	bSizerBright->Add( m_staticTextBright, 0, wxALL|wxALIGN_CENTER_HORIZONTAL, 5 );
-	
-	m_sliderBrightness = new wxSlider( sbSizerViewHSV->GetStaticBox(), wxID_ANY, 255, 0, 255, wxDefaultPosition, wxDefaultSize, wxSL_LABELS|wxSL_LEFT|wxSL_VERTICAL );
+
+	m_sliderBrightness = new wxSlider( sbSizerViewHSV->GetStaticBox(), wxID_ANY, 255, 0, 255, wxDefaultPosition, wxDefaultSize, wxSL_INVERSE|wxSL_LABELS|wxSL_LEFT|wxSL_VERTICAL );
 	bSizerBright->Add( m_sliderBrightness, 1, wxTOP|wxRIGHT|wxALIGN_CENTER_HORIZONTAL, 5 );
-	
-	
+
+
 	sbSizerViewHSV->Add( bSizerBright, 0, wxEXPAND, 5 );
-	
-	
+
+
 	bSizerPanels->Add( sbSizerViewHSV, 0, wxEXPAND|wxBOTTOM|wxRIGHT, 5 );
-	
-	
+
+
 	bSizerUpperFreeColors->Add( bSizerPanels, 1, wxEXPAND, 5 );
-	
-	
+
+
 	m_panelFreeColors->SetSizer( bSizerUpperFreeColors );
 	m_panelFreeColors->Layout();
 	bSizerUpperFreeColors->Fit( m_panelFreeColors );
 	m_notebook->AddPage( m_panelFreeColors, _("Color Picker"), true );
 	m_panelDefinedColors = new wxPanel( m_notebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL );
 	m_SizerDefinedColors = new wxBoxSizer( wxVERTICAL );
-	
+
 	m_fgridColor = new wxFlexGridSizer( 0, 10, 0, 0 );
 	m_fgridColor->AddGrowableCol( 1 );
 	m_fgridColor->AddGrowableCol( 3 );
@@ -153,78 +143,78 @@ DIALOG_COLOR_PICKER_BASE::DIALOG_COLOR_PICKER_BASE( wxWindow* parent, wxWindowID
 	m_fgridColor->AddGrowableCol( 9 );
 	m_fgridColor->SetFlexibleDirection( wxBOTH );
 	m_fgridColor->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
-	
-	
+
+
 	m_SizerDefinedColors->Add( m_fgridColor, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_CENTER_HORIZONTAL|wxTOP|wxBOTTOM, 5 );
-	
-	
+
+
 	m_panelDefinedColors->SetSizer( m_SizerDefinedColors );
 	m_panelDefinedColors->Layout();
 	m_SizerDefinedColors->Fit( m_panelDefinedColors );
 	m_notebook->AddPage( m_panelDefinedColors, _("Defined Colors"), false );
-	
+
 	bSizerUpperMain->Add( m_notebook, 0, wxEXPAND | wxALL, 5 );
-	
+
 	m_SizerTransparency = new wxBoxSizer( wxVERTICAL );
-	
-	
+
+
 	m_SizerTransparency->Add( 0, 20, 0, wxTOP, 5 );
-	
+
 	m_opacityLabel = new wxStaticText( this, wxID_ANY, _("Opacity:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_opacityLabel->Wrap( -1 );
 	m_SizerTransparency->Add( m_opacityLabel, 0, wxALIGN_CENTER_HORIZONTAL|wxTOP|wxLEFT, 5 );
-	
-	m_sliderTransparency = new wxSlider( this, wxID_ANY, 80, 20, 100, wxDefaultPosition, wxDefaultSize, wxSL_LABELS|wxSL_LEFT|wxSL_VERTICAL );
+
+	m_sliderTransparency = new wxSlider( this, wxID_ANY, 80, 20, 100, wxDefaultPosition, wxDefaultSize, wxSL_INVERSE|wxSL_LABELS|wxSL_LEFT|wxSL_VERTICAL );
 	m_SizerTransparency->Add( m_sliderTransparency, 1, wxTOP|wxBOTTOM|wxRIGHT|wxALIGN_CENTER_HORIZONTAL, 10 );
-	
-	
+
+
 	bSizerUpperMain->Add( m_SizerTransparency, 0, wxEXPAND|wxRIGHT|wxLEFT, 5 );
-	
-	
+
+
 	bSizerUpperMain->Add( 0, 0, 1, wxEXPAND|wxRIGHT|wxLEFT, 5 );
-	
-	
+
+
 	bSizerMain->Add( bSizerUpperMain, 0, wxEXPAND, 5 );
-	
+
 	m_staticline = new wxStaticLine( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
 	bSizerMain->Add( m_staticline, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 5 );
-	
+
 	wxBoxSizer* bButtonsSizer;
 	bButtonsSizer = new wxBoxSizer( wxHORIZONTAL );
-	
+
 	m_staticTextOldColor = new wxStaticText( this, wxID_ANY, _("Preview (old / new):"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextOldColor->Wrap( -1 );
 	bButtonsSizer->Add( m_staticTextOldColor, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxRIGHT|wxLEFT, 5 );
-	
+
 	m_OldColorRect = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), 0 );
 	m_OldColorRect->SetMinSize( wxSize( 30,22 ) );
-	
+
 	bButtonsSizer->Add( m_OldColorRect, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
-	
+
 	m_NewColorRect = new wxStaticBitmap( this, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxSize( -1,-1 ), 0 );
 	m_NewColorRect->SetMinSize( wxSize( 30,22 ) );
-	
+
 	bButtonsSizer->Add( m_NewColorRect, 0, wxALIGN_CENTER_VERTICAL, 5 );
-	
+
 	m_sdbSizer = new wxStdDialogButtonSizer();
 	m_sdbSizerOK = new wxButton( this, wxID_OK );
 	m_sdbSizer->AddButton( m_sdbSizerOK );
 	m_sdbSizerCancel = new wxButton( this, wxID_CANCEL );
 	m_sdbSizer->AddButton( m_sdbSizerCancel );
 	m_sdbSizer->Realize();
-	
+
 	bButtonsSizer->Add( m_sdbSizer, 1, wxALL, 5 );
-	
-	
+
+
 	bSizerMain->Add( bButtonsSizer, 1, wxEXPAND|wxLEFT, 10 );
-	
-	
+
+
 	this->SetSizer( bSizerMain );
 	this->Layout();
 	bSizerMain->Fit( this );
-	
+
 	this->Centre( wxBOTH );
-	
+
 	// Connect Events
 	m_RgbBitmap->Connect( wxEVT_LEFT_DOWN, wxMouseEventHandler( DIALOG_COLOR_PICKER_BASE::onRGBMouseClick ), NULL, this );
 	m_RgbBitmap->Connect( wxEVT_MOTION, wxMouseEventHandler( DIALOG_COLOR_PICKER_BASE::onRGBMouseDrag ), NULL, this );
@@ -285,5 +275,5 @@ DIALOG_COLOR_PICKER_BASE::~DIALOG_COLOR_PICKER_BASE()
 	m_sliderTransparency->Disconnect( wxEVT_SCROLL_THUMBTRACK, wxScrollEventHandler( DIALOG_COLOR_PICKER_BASE::OnChangeAlpha ), NULL, this );
 	m_sliderTransparency->Disconnect( wxEVT_SCROLL_THUMBRELEASE, wxScrollEventHandler( DIALOG_COLOR_PICKER_BASE::OnChangeAlpha ), NULL, this );
 	m_sliderTransparency->Disconnect( wxEVT_SCROLL_CHANGED, wxScrollEventHandler( DIALOG_COLOR_PICKER_BASE::OnChangeAlpha ), NULL, this );
-	
+
 }

common/dialogs/dialog_color_picker_base.h

@@ -1,12 +1,11 @@
 ///////////////////////////////////////////////////////////////////////////
-// C++ code generated with wxFormBuilder (version Jul 11 2018)
+// C++ code generated with wxFormBuilder (version Oct 26 2018)
 // http://www.wxformbuilder.org/
 //
 // PLEASE DO *NOT* EDIT THIS FILE!
 ///////////////////////////////////////////////////////////////////////////
 
-#ifndef __DIALOG_COLOR_PICKER_BASE_H__
-#define __DIALOG_COLOR_PICKER_BASE_H__
+#pragma once
 
 #include <wx/artprov.h>
 #include <wx/xrc/xmlres.h>
@@ -41,7 +40,7 @@
 class DIALOG_COLOR_PICKER_BASE : public DIALOG_SHIM
 {
 	private:
-	
+
 	protected:
 		wxNotebook* m_notebook;
 		wxPanel* m_panelFreeColors;
@@ -72,7 +71,7 @@ class DIALOG_COLOR_PICKER_BASE : public DIALOG_SHIM
 		wxStdDialogButtonSizer* m_sdbSizer;
 		wxButton* m_sdbSizerOK;
 		wxButton* m_sdbSizerCancel;
-		
+
 		// Virtual event handlers, overide them in your derived class
 		virtual void onRGBMouseClick( wxMouseEvent& event ) { event.Skip(); }
 		virtual void onRGBMouseDrag( wxMouseEvent& event ) { event.Skip(); }
@@ -85,13 +84,12 @@ class DIALOG_COLOR_PICKER_BASE : public DIALOG_SHIM
 		virtual void OnChangeEditSat( wxSpinEvent& event ) { event.Skip(); }
 		virtual void OnChangeBrightness( wxScrollEvent& event ) { event.Skip(); }
 		virtual void OnChangeAlpha( wxScrollEvent& event ) { event.Skip(); }
-		
-	
+
+
 	public:
-		
-		DIALOG_COLOR_PICKER_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Color Picker"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER ); 
+
+		DIALOG_COLOR_PICKER_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Color Picker"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
 		~DIALOG_COLOR_PICKER_BASE();
-	
+
 };
 
-#endif //__DIALOG_COLOR_PICKER_BASE_H__