Clément Saillant
e44efe13e0
Context: New firmware "Lisael Box" targeting the ESP32-S3-BOX-3 (8MB PSRAM, 16MB flash, LCD+touch, ES8311 codec, microSD). Establish the ESP-IDF 5.4/5.5 build skeleton before adding modules. Approach: Standard IDF project layout with a single big factory app (4MB) since the binary links the esp-box BSP, LVGL 9 and ESP-ADF. ESP-ADF is not a managed component, so the top-level CMake injects $ADF_PATH/components via EXTRA_COMPONENT_DIRS and warns clearly when ADF_PATH is unset. Changes: - top-level CMakeLists with ADF_PATH wiring - partitions.csv (16MB: factory 4MB + FAT storage) - sdkconfig.defaults (+ .esp32s3: octal PSRAM, 16MB, 240MHz, LVGL/PSRAM) - main/CMakeLists, idf_component.yml (esp-box-3 ^3.2, built-in json) - Kconfig.projbuild (Wi-Fi, weather lat/lon, child volume cap) - lisael_config.h shared constants, .gitignore Impact: Buildable skeleton; modules added in following commits. Not yet compiled (no IDF/ADF/board available) - see README.
19 lines
873 B
CSV
19 lines
873 B
CSV
# Lisael Box partition table — ESP32-S3-BOX-3 (16 MB flash)
|
|
#
|
|
# Single factory app, deliberately large (4 MB) because the firmware links
|
|
# ESP-ADF (audio pipeline + decoders), LVGL 9 and the esp-box BSP, which is a
|
|
# big binary. No OTA partitions for now (kept simple); switch to a dual-OTA
|
|
# layout later if remote updates are needed — there is plenty of headroom.
|
|
#
|
|
# The "sounds" / audio assets live on the physical microSD card mounted by the
|
|
# BSP (FATFS), NOT in flash — so no large data partition is needed here.
|
|
#
|
|
# All offsets/sizes aligned to 0x1000 (4 KB). Bootloader + partition table sit
|
|
# below 0x10000.
|
|
#
|
|
# Name, Type, SubType, Offset, Size, Flags
|
|
nvs, data, nvs, 0x9000, 0x6000,
|
|
phy_init, data, phy, 0xf000, 0x1000,
|
|
factory, app, factory, 0x10000, 0x400000,
|
|
storage, data, fat, 0x410000, 0x100000,
|