Clément Saillant
e44efe13e0
Context: New firmware "Lisael Box" targeting the ESP32-S3-BOX-3 (8MB PSRAM, 16MB flash, LCD+touch, ES8311 codec, microSD). Establish the ESP-IDF 5.4/5.5 build skeleton before adding modules. Approach: Standard IDF project layout with a single big factory app (4MB) since the binary links the esp-box BSP, LVGL 9 and ESP-ADF. ESP-ADF is not a managed component, so the top-level CMake injects $ADF_PATH/components via EXTRA_COMPONENT_DIRS and warns clearly when ADF_PATH is unset. Changes: - top-level CMakeLists with ADF_PATH wiring - partitions.csv (16MB: factory 4MB + FAT storage) - sdkconfig.defaults (+ .esp32s3: octal PSRAM, 16MB, 240MHz, LVGL/PSRAM) - main/CMakeLists, idf_component.yml (esp-box-3 ^3.2, built-in json) - Kconfig.projbuild (Wi-Fi, weather lat/lon, child volume cap) - lisael_config.h shared constants, .gitignore Impact: Buildable skeleton; modules added in following commits. Not yet compiled (no IDF/ADF/board available) - see README.
873 B
873 B
| 1 | # Lisael Box partition table — ESP32-S3-BOX-3 (16 MB flash) |
|---|---|
| 2 | # |
| 3 | # Single factory app, deliberately large (4 MB) because the firmware links |
| 4 | # ESP-ADF (audio pipeline + decoders), LVGL 9 and the esp-box BSP, which is a |
| 5 | # big binary. No OTA partitions for now (kept simple); switch to a dual-OTA |
| 6 | # layout later if remote updates are needed — there is plenty of headroom. |
| 7 | # |
| 8 | # BSP (FATFS), NOT in flash — so no large data partition is needed here. |
| 9 | # |
| 10 | # All offsets/sizes aligned to 0x1000 (4 KB). Bootloader + partition table sit |
| 11 | # below 0x10000. |
| 12 | # |
| 13 | # Name, Type, SubType, Offset, Size, Flags |
| 14 | nvs, data, nvs, 0x9000, 0x6000, |
| 15 | phy_init, data, phy, 0xf000, 0x1000, |
| 16 | factory, app, factory, 0x10000, 0x400000, |
| 17 | storage, data, fat, 0x410000, 0x100000, |