Compare commits

...

148 Commits

Author SHA1 Message Date
Alex Cheema 7469f44e58 fix: clean up stale runners from state when instance is deleted
apply_instance_deleted() previously only removed the instance from
state.instances, leaving its runner entries orphaned in state.runners
with their last known status (e.g. RunnerReady). After a node kill and
rejoin, readiness checks would see these stale entries and attempt
inference against dead runner processes, causing post-recovery failures.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 18:41:22 -08:00
Alex Cheema 5d26d2dcd6 fix: eliminate serialization bottlenecks in continuous batching pipeline
The batch prefill deferral (35973b86) was insufficient alone because
multiple other serialization points prevented true concurrent request
processing. This fixes four bottlenecks:

- Drain all available tasks per plan_step cycle instead of one-per-100ms
- Keep tasks in supervisor pending set after ACK to prevent re-dispatch
- Process TextGeneration tasks inline during decode loop (no break/restart)
- Pre-tokenize in queue_request so sync_and_insert_pending is lightweight
- Reuse prompt from queue_request for thinking detection (no double apply_chat_template)

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 18:36:56 -08:00
Alex Cheema 35973b8698 fix: defer batch prefill for true continuous batching
Move sync_and_insert_pending() out of the per-task loop so all
concurrently-arrived requests share a single batched prefill pass.
Previously each request was prefilled individually as it arrived,
serializing what should be a parallel operation.

Also break early from the generation TimeBudget loop when new tasks
are waiting, so they get inserted sooner rather than blocking for
the full 0.5s budget.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 17:52:04 -08:00
Alex Cheema 41d9d2a61f fix: add has_thinking to mock tokenizers in edge case tests
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 17:02:07 -08:00
Alex Cheema efbf9850eb style: apply nix fmt to new edge case test file
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 16:55:38 -08:00
Alex Cheema 4a22c4b512 fix: restore per-request sampling, model-specific parsers, error handling, and tracing
- Use per-request temperature/top_p/top_k from TextGenerationTaskParams
  instead of hardcoded sampler defaults in BatchGenerationEngine
- Restore model-specific tokenizer patches (Kimi, GLM) at load time
- Add GptOssTracker for per-request GPT-OSS stream parsing with
  thinking channels and tool call routing
- Filter Kimi section boundary tokens from batch output
- Detect thinking prompt suffix and prepend think_start on first token
- Wrap batch_engine.step() in try/except, send ErrorChunks on failure
- Call _send_traces_if_enabled() when text generation tasks complete

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 16:55:18 -08:00
Alex Cheema 4d0fe5d17b test: add edge-case tests for continuous batching
Cover concurrent tool calls, length/stop finish reasons, multiple
completions per step, staggered draining, and batches of 5-10 requests.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 16:27:45 -08:00
Alex Cheema 9fe7251796 fix: add generation loop, deferred task completion, and tool call tracking
The batch engine integration had three critical issues:
1. No generation loop - batch_engine.step() only ran during shutdown drain
2. Tasks marked complete before any tokens were generated
3. Tool calls dropped - parse_tool_calls pipeline was disconnected

Restructure runner main() into a two-phase while loop that alternates
between TimeBudget-based generation steps and task polling. Add
ToolCallTracker for per-request tool call state in the batch path,
and defer TaskStatusUpdated(Complete) until finish_reason is set.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 15:22:09 -08:00
Alex Cheema 1c8f69ce00 fix: address PR review comments for continuous batching
- Use get_args(FinishReason) instead of hardcoded finish reason checks
- Use new Python type syntax (def share_object[T]) instead of TypeVar
- Assert obj is not None for rank 0 with message to use mx_barrier()
- Raise RuntimeError on size=0 instead of silently returning None
- Simplify share_object callers since return type is now T (not T | None)

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 14:29:13 -08:00
Alex Cheema f19166617a fix: use EventCollector instead of mp_channel to fix flaky test
Replace mp_channel event receiver with direct EventCollector in
test_continuous_batching.py to eliminate multiprocessing pipe race
condition that caused test_runner_status_reflects_active_requests
to intermittently miss RunnerRunning events.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 14:00:28 -08:00
Alex Cheema 51e959c979 feat: integrate BatchGenerationEngine into runner for continuous batching
Replace synchronous per-request text generation with BatchGenerationEngine,
enabling continuous batching of multiple concurrent inference requests.

- Runner accepts TextGeneration in both RunnerReady and RunnerRunning states
- Requests are queued and sync-inserted into the batch engine
- Batch engine is drained during shutdown to complete in-flight requests
- Only rank 0 emits ChunkGenerated events (distributed-safe)
- Enable previously-skipped continuous batching tests
- Update event ordering tests for the new batch-based flow

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-15 13:47:04 -08:00
Alex Cheema cd43588a04 Merge remote-tracking branch 'origin/main' into alexcheema/continuous-batching 2026-02-13 10:09:40 -08:00
Alex Cheema 1c3cc699d4 fix: add missing getModelFitStatus prop to Recent tab (#1470)
## Summary
- Clicking the **Recent** tab in the Model Picker crashed with
`TypeError: e.getModelFitStatus is not a function`
- The `ModelPickerGroup` component in the Recent tab section was missing
the `{getModelFitStatus}` prop, while all other tabs (e.g., the main
model list) passed it correctly
- Added the missing `{getModelFitStatus}` prop so the Recent tab renders
without errors, matching the behavior of the other tabs

## Test plan
- [ ] Open the dashboard and click **SELECT MODEL**
- [ ] Switch to the **Recent** tab — verify it renders without crashing
- [ ] Confirm model fit status indicators display correctly on recent
models
- [ ] Verify the other tabs (All, Favorites) still work as before

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-13 16:37:32 +00:00
Alex Cheema 7b879593bb fix: update continuous batching types after main merge
Replace ChatCompletionTaskParams with TextGenerationTaskParams and
ChatCompletion with TextGeneration to match the refactored type
hierarchy from main. Add missing usage parameter to GenerationResponse
constructors and add type annotations to StreamingDetokenizer stubs.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-13 07:29:13 -08:00
Alex Cheema e4e895d7a8 Merge remote-tracking branch 'origin/main' into alexcheema/continuous-batching
# Conflicts:
#	AGENTS.md
2026-02-13 05:57:15 -08:00
rltakashige 5a28642790 Add support for Step 3.5 flash! (#1460)
## Motivation

Working version of #1366 

## Changes

Add Step 3.5 Flash

## Test Plan

### Manual Testing
Works!

### Automated Testing
Running two processes tensor/pipeline sharded gives same logits as
single process.
2026-02-13 12:10:18 +00:00
Alex Cheema 6950f94109 dashboard: show macOS version in debug mode (#1454)
## Motivation

When debugging cluster issues, it's useful to see which macOS version
each node is running — especially since version mismatches can cause
compatibility problems. The OS version data is already collected by the
identity gatherer but wasn't shown in the topology graph.

## Changes

- Added OS version label (e.g. "macOS 15.2") to each node in the
topology graph when debug mode is enabled
- Renders below the existing TB and RDMA debug labels using the same
styling conventions
- Sources data from the existing `nodeIdentities` store (no backend
changes needed)

## Why It Works

The `nodeIdentities` store already contains `osVersion` for each node.
We simply read it in the `TopologyGraph` component and append a text
label in the debug section, following the exact same pattern as the TB
and RDMA labels.

## Test Plan

### Manual Testing
<!-- Hardware: MacBook Pro -->
- Enable debug mode in the dashboard
- Verify OS version label appears below TB/RDMA labels on each node
- Verify label disappears when debug mode is disabled

### Automated Testing
- Dashboard build passes (`npm run build`)

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
Co-authored-by: Ryuichi Leo Takashige <leo@exolabs.net>
2026-02-12 17:56:55 +00:00
Alex Cheema d0c44273db feat: add enable_thinking toggle for thinking-capable models (#1457)
## Motivation

Fixes #1456. Models like DeepSeek V3.2, Qwen3, and GLM-4.7 always run in
thinking mode because their chat templates auto-inject `<think>`. Users
need a way to disable thinking for models that support both modes.

## Changes

**API**: Added `enable_thinking: bool | None` to `ChatCompletionRequest`
and `TextGenerationTaskParams`. Passed through the adapter to
`tokenizer.apply_chat_template()` as a kwarg (only when explicitly set,
so models without the template variable are unaffected).

**Dashboard**: Added a thinking toggle button in the chat input area.
Visible only when the selected model has both "text" and "thinking"
capabilities.

## Why It Works

Most thinking model chat templates (DeepSeek, Qwen3, GLM) accept
`enable_thinking` as a Jinja template variable. Passing
`enable_thinking=False` prevents the template from injecting `<think>`,
matching the vLLM convention.

## Test Plan

### Manual Testing
- `curl` with `"enable_thinking": false` against a thinking model — no
`<think>` in output
- Dashboard toggle visible for thinking models, hidden for text-only
models

### Automated Testing
- basedpyright: 0 errors
- ruff: clean
- pytest: 188 passed
- dashboard build: success

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-12 17:35:24 +00:00
Jake Hillion cc33213842 bench: add --settle-timeout for cluster startup retry (#1449)
exo_bench.py fails if started too soon after a cluster starts because
the topology hasn't populated yet, resulting in no valid placements.

Extracted the preview-fetch-and-filter logic into a
`fetch_and_filter_placements` helper and added a retry loop with
exponential backoff (1s initial, 2x multiplier, 60s cap). The new
`--settle-timeout` flag controls how long to retry (default 0 = try
once, preserving existing behaviour). Each retry logs a warning
explaining the cluster may still be settling.

Test plan:
- Tested on several freshly started clusters. This used to fail a lot,
  now it succeeds.
2026-02-12 16:38:09 +00:00
Alex Cheema 62e8110e97 fix: prevent DownloadModel TaskCreated event flood (#1452)
## Motivation

When a model download fails repeatedly (e.g. `ContentLengthError` on a
large model like `zai-org/GLM-5`), the download coordinator accumulates
duplicate progress callbacks — one per retry cycle. Each callback
independently throttles at 1 event/sec, so after N retries, every
download progress tick generates N events instead of 1. After an hour of
failures (~60 retry cycles), this produces ~60 `NodeDownloadProgress`
events/sec, overwhelming the master, delaying heartbeats, and causing
the node to time itself out.

### The callback accumulation cycle
1. `_start_download_task()` calls
`shard_downloader.on_progress(callback)` which **appends** to a list
2. Download fails → `DownloadFailed` status set, but old callback stays
in the list
3. 60s later: `_emit_existing_download_progress()` scans disk → resets
status to `DownloadPending`
4. Worker sends new `StartDownload` → coordinator accepts (guard didn't
check `DownloadFailed`)
5. `_start_download_task()` appends **another** callback
6. Each callback has its own throttle → N callbacks = N events per
progress tick

## Changes

### Commit 1: `src/exo/worker/main.py`
Move the `DownloadModel` backoff check **before** `TaskCreated` emission
in `plan_step()`. Previously `TaskCreated` was emitted unconditionally
every 0.1s even when backoff blocked the download command.

### Commit 2: `src/exo/download/coordinator.py`
1. **Register progress callback once** in `__post_init__` instead of
per-download in `_start_download_task()`. Uses a per-model throttle dict
instead of per-callback closure variables.
2. **Add `DownloadFailed` to the `_start_download()` guard** so
redundant `_start_download_task()` calls don't happen. Retries still
work because `_emit_existing_download_progress` resets `DownloadFailed`
→ `DownloadPending` by scanning disk every 60s.

## Why It Works

The root cause was callbacks accumulating in
`ResumableShardDownloader.on_progress_callbacks` (a list that only
appends, never clears). By registering one callback per coordinator
lifetime and guarding against re-entry on `DownloadFailed`, we ensure
exactly one progress event per model per progress tick regardless of how
many retry cycles have occurred.

## Test Plan

### Manual Testing
- Verified the download retry flow: failed download → 60s scan resets
status → new `StartDownload` accepted → download retries with single
callback

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes
- `uv run pytest` — 188 passed

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 23:50:43 +00:00
Alex Cheema 98773437f3 Make info gatherer monitors resilient with retry loops and timeouts (#1448)
## Motivation

Info gatherer monitors could silently stop posting events, causing stale
node state after rejoins. The macmon monitor was especially fragile — it
had no retry loop, so a crash or parse error would kill it permanently.
Worse, the unhandled exception would propagate to the TaskGroup and take
down *all* sibling monitors. Additionally, none of the monitors had
timeouts on their subprocess calls, so a hung `system_profiler` or
`networksetup` could stall a monitor indefinitely.

## Changes

- Wrap `_monitor_macmon` in a `while True` retry loop with `except
Exception`, matching the pattern used by all other monitors
- Add `fail_after` timeouts to all monitor loop bodies:
- 10s for lightweight commands (`_monitor_misc`, `_watch_system_info`,
`_gather_iface_map` init)
- 30s for heavier commands (`_monitor_system_profiler_thunderbolt_data`,
`_monitor_thunderbolt_bridge_status`)
- Remove unused `CalledProcessError` and `cast` imports

## Why It Works

All monitors now follow the same resilient pattern: `while True` → `try`
with `fail_after` → `except Exception` (logs warning) → `sleep`. If a
subprocess hangs, the timeout fires and `TimeoutError` is caught by the
existing `except Exception` handler. If macmon crashes, it restarts
after the interval instead of dying permanently. No single monitor
failure can cascade to kill the others.

## Test Plan

### Manual Testing
<!-- Hardware: macOS with macmon installed -->
<!-- What you did: -->
- Run exo, kill macmon process (`kill $(pgrep macmon)`), verify it
restarts and metrics resume
- Verify all monitors continue posting events after simulated hangs

### Automated Testing
- All 188 existing tests pass
- basedpyright: 0 errors
- ruff: all checks passed

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 23:07:36 +00:00
Jake Hillion a8acb3cafb dashboard: show available disk space on downloads page
The downloads page previously only showed the approximate space used by
downloaded models (summed from completed download sizes), but did not
show how much disk space was actually available. This made it difficult
to know if a download would succeed before pressing the button.

Added disk space tracking to the InfoGatherer that polls the models
directory partition every 30 seconds. The DiskUsage type captures total
and available space, which flows through the event system to State and
is exposed via the /state API. The dashboard now displays "X on disk /
Y available" for each node in the downloads view.

Test plan:
- CI
2026-02-11 21:57:28 +00:00
Alex Cheema a0721dbe57 feat: warn when cluster nodes have mismatched macOS versions (#1436)
## Motivation

When nodes in an exo cluster run different macOS versions, inference can
produce incompatible results or fail silently. Users currently have no
way to know this from the dashboard.

## Changes

- Added `get_os_version()` to `system_info.py` that returns the macOS
version (e.g. `"15.3"`) or platform name for non-Mac nodes
- Added `os_version` field to `NodeIdentity` and
`StaticNodeInformation`, gathered once at startup
- Propagated `os_version` through the event sourcing pipeline
(`apply.py`)
- Exposed `nodeIdentities` from the dashboard store with `osVersion`
- Added a derived `macosVersionMismatch` check in `+page.svelte` that
triggers when 2+ macOS nodes report different versions
- Rendered a yellow "INCOMPATIBLE macOS VERSIONS" warning badge
(matching the existing Thunderbolt Bridge cycle warning style) with a
hover tooltip listing each node's name and version, in all three
topology view sizes (large, medium, compact)

## Why It Works

The OS version is a static property gathered once at node startup via
`platform.mac_ver()`. It flows through the existing
`StaticNodeInformation` → `NodeGatheredInfo` event → `NodeIdentity`
state pipeline, so no new event types or state fields beyond
`os_version` on `NodeIdentity` are needed. The dashboard derives the
mismatch by comparing `osVersion` across all nodes whose version looks
like a macOS version string (starts with a digit).

## Test Plan

### Manual Testing
Hardware: 4x Mac Studio M2 Ultra 512GB (s18, s17 (2), james, mike),
connected via Thunderbolt
- s18 and s17 (2) on macOS 26.2, james and mike on macOS 26.3
- Verified the "INCOMPATIBLE macOS VERSIONS" warning badge appears in
the topology view
- Verified the hover tooltip lists all four nodes with their respective
versions
- Screenshots attached in comment below

### Automated Testing
- basedpyright: 0 errors
- ruff check: all checks passed
- nix fmt: no formatting changes needed
- Dashboard builds successfully

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 21:18:59 +00:00
Alex Cheema 50e2bcf93e fix: RDMA debug labels, TB5 info box, and rdma_ctl status detection (#1437)
## Motivation

Several RDMA/Thunderbolt UX issues in the dashboard and macOS app:

1. **Debug mode showed "? ?" for RDMA connections** — the topology view
only extracted IPs from socket connections, not RDMA interface names
2. **No way to detect if RDMA is actually enabled** — the system only
knew about TB5 hardware and RDMA topology edges, not whether `rdma_ctl`
was enabled on each node
3. **False "RDMA AVAILABLE" info box** — showed on Mac Minis with idle
TB5 ports even when RDMA was already enabled, and on single nodes with
TB5
4. **macOS app only showed local RDMA status** — ran `rdma_ctl` locally
with no visibility into other nodes in the cluster

## Changes

### Dashboard: Fix RDMA debug labels (`0abc90c4`)
- Added `sourceRdmaIface` and `sinkRdmaIface` to `TopologyEdge`
interface
- Updated `TopologyGraph.svelte` and `ModelCard.svelte` to show `RDMA
en2 → en3` instead of `? ?`

### Dashboard: TB5 RDMA info box (`a3795552`, `8ce8e173`)
- Added dismissible info box when 2+ nodes have TB5 hardware but RDMA is
disabled
- Includes setup instructions (Recovery mode → `rdma_ctl enable` →
reboot, TB5 cables, macOS version match)
- Requires 2+ exo nodes with TB5 to avoid false positives from
single-node setups

### Backend: `rdma_ctl status` detection (`ae07239b`)
- Added `RdmaCtlStatus` event to `info_gatherer.py` — runs `rdma_ctl
status` with 5s timeout, `shutil.which` guard, and `OSError` handling
(polls every 10s on macOS)
- Added `NodeRdmaCtlStatus` model to `profiling.py` and `node_rdma_ctl`
field to `State`
- Handle in `apply.py` (event apply + node timeout cleanup)
- Exposed `nodeRdmaCtl` in dashboard store (`app.svelte.ts`)
- Info box detection now uses actual RDMA status instead of TB5 link
speeds

### Dashboard: Per-node RDMA debug labels (`ae07239b`)
- Debug mode shows `RDMA:ON` (green) or `RDMA:OFF` (dim) per node in
topology view, below the TB bridge label

### macOS app: Cluster-wide RDMA status from `/state` (`a1455b61`,
`d0d77b63`)
- Added `NodeRdmaCtlStatus` to `ClusterState.swift` — decoded from
`/state` endpoint
- Replaced local-only `rdma_ctl status` check with cluster-wide
`nodeRdmaCtl` from state
- Debug section shows per-node RDMA enabled/disabled for all nodes in
the cluster
- Still shows local `ibv_devices` and `ibv_devinfo` details (device
names, active ports) for richer local debugging

## Files changed

| Area | File | Change |
|------|------|--------|
| Backend | `src/exo/utils/info_gatherer/info_gatherer.py` |
`RdmaCtlStatus` event, monitor task |
| Backend | `src/exo/shared/types/profiling.py` | `NodeRdmaCtlStatus`
model |
| Backend | `src/exo/shared/types/state.py` | `node_rdma_ctl` field |
| Backend | `src/exo/shared/apply.py` | Event handler + timeout cleanup
|
| Dashboard | `dashboard/src/lib/stores/app.svelte.ts` | `nodeRdmaCtl` +
`nodeThunderbolt` in store |
| Dashboard | `dashboard/src/routes/+page.svelte` | Info box with RDMA
detection + instructions |
| Dashboard | `dashboard/src/lib/components/TopologyGraph.svelte` | RDMA
debug labels per node + fix "? ?" |
| Dashboard | `dashboard/src/lib/components/ModelCard.svelte` | RDMA
interface display fix |
| App | `app/EXO/EXO/Models/ClusterState.swift` | `NodeRdmaCtlStatus`
struct + decode |
| App | `app/EXO/EXO/ContentView.swift` | Cluster-wide RDMA view + local
device details |
| App | `app/EXO/EXO/Services/NetworkStatusService.swift` | Remove local
`rdma_ctl`, keep `ibv_*` |

## Test Plan

- [x] `uv run basedpyright` — 0 errors
- [x] `uv run ruff check` — pass
- [x] `nix fmt` — clean
- [x] `cd dashboard && npm run build` — success
- [x] `uv run pytest` — 188 passed
- [x] Xcode build — compiles (only pre-existing `dist/exo` resource
error)
- [x] Deployed to Mac Minis — `nodeRdmaCtl` shows `enabled: true`, no
false info box
- [x] Deployed to James cluster — RDMA debug labels show correctly

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 20:43:11 +00:00
Alex Cheema 7bed91c9c2 feat: add Recent tab to model picker (#1440)
## Motivation

When frequently switching between models, it's tedious to search through
the full model list to find ones you've used before. A "Recent" tab
provides quick access to previously launched models.

## Changes

- **New store** (`dashboard/src/lib/stores/recents.svelte.ts`):
`RecentsStore` class persisting recently launched model IDs with
timestamps to localStorage (key: `exo-recent-models`). Caps at 20
entries, deduplicates on re-launch (moves to top).
- **FamilySidebar**: Added "Recent" tab between Favorites and Hub,
conditionally shown when there are recent models.
- **FamilyLogos**: Added clock/history icon for the recents tab.
- **ModelPickerModal**: Added `recentModelIds`/`hasRecents` props.
Derives single-variant `ModelGroup[]` from recent IDs and renders them
using the same `ModelPickerGroup` component as all other tabs —
consistent styling, memory grey-out, favorites, info button, download
indicators.
- **+page.svelte**: Calls `recordRecentLaunch(modelId)` after successful
instance launch. Passes reactive recent state to the modal.

## Why It Works

Follows the exact same pattern as the existing Favorites feature
(localStorage persistence, conditional tab display, reactive Svelte 5
`$state`/`$derived`). Recent models are wrapped as single-variant
`ModelGroup` objects so they reuse `ModelPickerGroup` for identical row
rendering across all tabs.

## Test Plan

### Manual Testing
<!-- Hardware: MacBook Pro -->
- Launch a model instance → reopen model picker → "Recent" tab appears
with the launched model
- Launch a second model → it appears at top of the Recent list
- Re-launch the first model → it moves back to top
- Search within the Recent tab filters the list
- Models that don't fit in memory are greyed out (same as All tab)
- Close/reopen browser → recents persist from localStorage

### Automated Testing
- Dashboard builds successfully (`npm run build`)

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-11 12:34:08 -08:00
Hunter Bown 48caea4a23 feat: add intermediate model-fit state for cluster-capacity-only models (#1441)
## Motivation
In the model picker, non-runnable models were not clearly separated
between two different cases:

- model exceeds currently available RAM but can fit in total cluster
capacity
- model exceeds total cluster capacity

That made it harder to distinguish "not runnable right now" from "too
large for this cluster."

## Changes
- Added a tri-state fit status in dashboard model-picker flow:
  - `fits_now`
  - `fits_cluster_capacity`
  - `too_large`
- Updated dashboard logic to compute both available cluster RAM and
total cluster RAM.
- Passed fit status through picker components.
- Updated model size color mapping:
  - `fits_now` -> white/gray
  - `fits_cluster_capacity` -> orange
  - `too_large` -> red
- Updated group ordering for non-runnable models:
- orange groups (`fits_cluster_capacity`) are listed above red groups
(`too_large`).

## Why It Works
Launch safety is unchanged: selection is still gated by existing
placement feasibility (`canModelFit`), so models that cannot run now
remain disabled.

The new fit status is used for visual distinction and ordering only:
- runnable now
- fits cluster capacity but not free RAM now
- too large for cluster capacity

## Before
Non-runnable models were not clearly distinguished by temporary capacity
vs hard capacity limit.

## After
Model picker clearly separates states by both color and order:
- Runnable now (white/gray)
- Fits cluster capacity but not free RAM now (orange, disabled)
- Exceeds cluster capacity (red, disabled)

## Test Plan
### Manual testing
- Open model picker with live cluster memory telemetry.
- Verify white/gray models are selectable.
- Verify orange models are disabled and appear above red models.
- Verify red models are disabled and appear below orange models.

### Automated checks
- `npm --prefix dashboard run build` passes.
- `uv run basedpyright` passes.
- `uv run ruff check` passes.
- `npm --prefix dashboard run check` reports existing pre-change Svelte
diagnostics (same known SVG title/a11y items).
- `uv run pytest` in this local environment exits during collection due
existing `tests/start_distributed_test.py` `SystemExit` usage.
- No Python code was changed.

---------

Co-authored-by: Alex Cheema <41707476+AlexCheema@users.noreply.github.com>
2026-02-11 00:21:35 +00:00
Mustafa Alp Yılmaz eead50b4cd Fix setrlimit crash when hard file descriptor limit < 65535 (#1430)
## Summary

`exo` crashes on startup when the system's hard file descriptor limit is
below 65535, which occurs in macOS LaunchDaemon environments, Docker
containers, and other restricted setups.

**Root cause:** `resource.setrlimit(resource.RLIMIT_NOFILE, (max(soft,
65535), hard))` raises `ValueError` when `hard < 65535` because the soft
limit cannot exceed the hard limit.

**Fix:**
- **`main.py`**: Clamp the target soft limit to `min(max(soft, 65535),
hard)` so it never exceeds the hard limit
- **`utils_mlx.py`**: Query current limits instead of hardcoding `(2048,
4096)`, which both crashed on restricted systems and incorrectly lowered
the hard limit when it was set higher

## Test plan

- [x] `basedpyright` passes with 0 errors
- [x] `ruff check` passes
- [x] Verify startup works on system with hard limit < 65535 (tested in
macOS LaunchDaemon with hard limit 10240)
- [x] Verify startup still works on default macOS (hard limit typically
unlimited)
2026-02-10 22:46:22 +00:00
Jake Hillion 199df64cfc util: remove VecExt trait, inline at call site (#1446)
VecExt added a .map() convenience method on Vec<T> that simply called
.into_iter().map(f).collect(). This thin wrapper provided no
optimisation benefit and obscured a standard iterator pattern behind a
nightly feature gate and an extra dependency.

Replaced the single call site in exo_pyo3_bindings with the equivalent
iterator chain and removed the ext module, the extend dependency, and
the trait_alias feature gate from the util crate.

Test plan:
- CI
2026-02-10 20:45:57 +00:00
Ryuichi Leo Takashige dc7ade8052 set the mlx hash 2026-02-10 20:16:17 +00:00
Ryuichi Leo Takashige dc781497c5 update mlx to 0.30.6 2026-02-10 20:16:17 +00:00
Jake Hillion c37eb24331 util: remove dead code (#1445)
The util crate contained several unused items: NonemptyArray,
BoxedSliceExt, a blanket Sealed trait, an empty alias module, six unused
nightly feature gates, and five unused Cargo dependencies (thiserror,
once_cell, internment, derive_more, bon, recursion).

Removed all items that had no references outside their own definitions,
keeping only WakerDeque, VecExt, and the trait_alias feature gate which
are actively used by the networking and exo_pyo3_bindings crates.

Test plan:
- CI
2026-02-10 20:10:54 +00:00
Jake Hillion 8af2af6328 nix: override apple-sdk to 26.2 and enable MLX_BUILD_CPU (#1443)
The pinned nixpkgs provides apple-sdk 26.0, but building MLX requires
SDK 26.2. The upstream package reads versions.json via a relative path
at eval time, so it can't be overridden through callPackage args.

Added a thin overlay that copies the upstream apple-sdk source and
patches only metadata/versions.json to point at SDK 26.2. Also enabled
MLX_BUILD_CPU in the MLX nix build.

This avoids vendoring the entire apple-sdk package (~2200 lines) while
still getting the SDK version we need.

Test plan:
- CI
- Built and ran on two machines connected with Thunderbolt 5 - Kimi K2.5
starts in Tensor+RDMA and seems sensible.
2026-02-10 19:53:53 +00:00
rltakashige 43728b2047 Send all exo logs (#1439)
## Motivation

Log rotation adds a bunch of .zst files. Let's send them all in the bug
reports.

This PR also standardises the logs so that they all include the
timestamp.
2026-02-10 19:28:33 +00:00
rltakashige 1699fcfb9f standardise logs (#1442)
## Motivation

Standardises exo.log and event_log

## Changes

- exo.log and exo.log.zst are now in a exo_log directory.
- event_log is now timestamped and not numbered. The timestamps can be
sorted as they are YYYY-MM-DD-HH-MM

## Test Plan

### Manual Testing
Nothing crashes.
2026-02-10 19:13:25 +00:00
rltakashige 009b43c662 add log rotation for .exo/exo.log (#1438)
## Motivation

.exo.log currently contains all past history. This just makes it hard to
read and is unnecessarily expensive even on disk.

## Why It Works

Just uses loguru's rotation.

## Test Plan

### Manual Testing
exo.log is new. 
<img width="1992" height="706" alt="image"
src="https://github.com/user-attachments/assets/9b293993-1141-43e7-b58e-0ddd2d4eda2e"
/>
2026-02-10 18:55:06 +00:00
Jake Hillion 1f242e8eee gossipsub: stop silent message dropping and warn (#1434)
The 15-second publish_queue_duration caused messages in peer queues to
be silently dropped. When events are dropped, workers detect gaps in the
event index sequence and request missing events via the NACK path
(RequestEventLog), but this recovery is inefficient.

Removed the timeout configuration - gossipsub now uses its default
behavior without time-based eviction. If queue buildup is a concern,
queue size should be limited explicitly rather than dropping by timeout.

Split error handling to log AllQueuesFullError as a warning (indicates
peers are unresponsive) while keeping NoPeersSubscribedToTopicError
silent (expected during startup and network partitions).

Test plan:
- CI
2026-02-10 18:47:47 +00:00
rltakashige 64179c6fc1 Dont save to app directory (#1435)
## Motivation

App keeps losing Local Network permissions.

## Changes

Don't save stuff to the app directory anymore. Instead, save to .exo.

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
Before:
<img width="1512" height="106" alt="image"
src="https://github.com/user-attachments/assets/544ef57e-b626-484d-941f-2472969aa208"
/>

After:
<img width="433" height="53" alt="Screenshot 2026-02-10 at 17 43 06"
src="https://github.com/user-attachments/assets/3de2856b-cdf6-4b35-aa8f-50440686344f"
/>


### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-02-10 18:41:36 +00:00
Jake Hillion 305a3c8b70 event_log: move event log from unbounded in-memory list to disk (#1432)
The master and API event logs (list[Event]) grew unbounded in RAM for
the lifetime of the process. Events are rarely read back (only for
RequestEventLog when a new node catches up, or the dashboard /events
endpoint).

Introduced a DiskEventLog class that writes length-prefixed msgpack
records to an append-only file, using a bounded LRU cache of byte
offsets for indexed access. On close, the active file is compressed
with ZSTD and rotated into a numbered archive slot, keeping the last 5
archives (events.1.bin.zst through events.5.bin.zst). On construction,
any stale active file from a crash is rotated before opening a fresh
log. The /events API endpoint now streams the JSON array one event at a
time rather than materializing the full list in memory. Deserialization
routes msgpack through json.dumps into Pydantic's validate_json() to
get correct JSON-mode coercion (e.g. string to enum) under strict mode.

This bounds memory usage to the LRU cache (128 entries) regardless of
event volume, while still supporting efficient sequential reads from
disk when needed.

Test plan:
- CI
- New unit tests for DiskEventLog: append/read, range queries, rotation
  on close, stale file recovery, idempotent close, successive sessions,
  archive retention limit (5 max)
- Tested on a cluster with 9000 events. /events continues working.
- On disk size is 3.9MiB with ~8000 events, and the compression is very
  effective.
- Disconnected and rejoined a machine, it rejoined fine.

---------

Co-authored-by: Ryuichi Leo Takashige <leo@exolabs.net>
2026-02-10 17:27:32 +00:00
Alex Cheema ead19bea74 Always load image model cards into cache (#1421)
## Motivation

Follows up on #1408. Image models (FLUX, Qwen-Image, etc.) don't have a
`config.json` on HuggingFace. Previously, image model TOML cards were
only loaded into `_card_cache` when `EXO_ENABLE_IMAGE_MODELS=true`. When
the flag was off but an image model was requested (e.g., via
`get_placement_previews`), `ModelCard.load()` fell through to
`fetch_from_hf()` which tried to download `config.json` — causing
`FileNotFoundError` spam. #1408 added defensive error handling; this PR
fixes the root cause.

## Changes

**`model_cards.py`**: Always include `image_model_cards/` in
`CARD_SEARCH_PATH` so image model TOML cards are always loaded into
`_card_cache`. `ModelCard.load()` then finds them directly and never
falls through to `fetch_from_hf()`. The `EXO_ENABLE_IMAGE_MODELS` flag
now controls whether image models appear in `get_model_cards()` (the
listing) rather than whether they're loaded at all.

## Why It Works

`fetch_from_hf()` is designed for text models only (it hardcodes
`tasks=[ModelTask.TextGeneration]` and requires `config.json`). Image
models should never reach that path. By always having them in the cache,
the lookup succeeds immediately and `fetch_from_hf()` is never called.

## Test Plan

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-10 09:11:57 -08:00
Jake Hillion 5a83e59182 dashboard: allow typing in chat input while response is generating (#1433)
The chat textarea was fully disabled during response generation,
preventing users from drafting their next message while waiting.

Removed the `disabled={loading}` attribute from the textarea element.
Submission is still blocked during generation by the early return in
`handleSubmit()` and the submit button's own disabled state.

Test plan:
- Ran on one machine. While a model was writing a really long poem, I
typed my next response. I couldn't submit it with Enter and the button
still said "Processing" greyed out. I could send the message after
generation finished.
2026-02-10 16:12:08 +00:00
Jake Hillion 5b5577bead build-app: upload DMG to S3 for non-tagged builds (#1428)
Non-tagged builds (test-app branch, manual dispatch) only uploaded the
DMG as a GitHub artifact, which requires authentication to download.

Added an early exit path that uploads the DMG with a commit hash suffix
(EXO-<sha>.dmg) for non-tagged builds, making it publicly accessible
via S3.

Test plan:
- CI
-
https://github.com/exo-explore/exo/actions/runs/21837274032/job/63011907978
  worked as intended

Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-10 15:47:49 +00:00
Evan Quiney 8314a2aa78 cleaning up the todos (#1406)
kinda closes #1400 ( a bit )
2026-02-10 12:35:29 +00:00
Alex Cheema 163cf18384 Add error handling to info gatherer monitor loops (#1422)
## Motivation

If any of the `InfoGatherer` monitor loops throw an unexpected
exception, the entire monitoring task crashes and never recovers. This
can silently stop memory, network, or Thunderbolt data collection for
the lifetime of the process.

## Changes

Wrap the body of each `while True` monitor loop in a try/except that
logs the exception as a warning and continues to the next iteration. The
sleep at the end of each loop runs regardless, providing natural backoff
before retry.

Affected methods: `_monitor_misc`,
`_monitor_system_profiler_thunderbolt_data`, `_monitor_memory_usage`,
`_watch_system_info`, `_monitor_thunderbolt_bridge_status`.

`_monitor_macmon` already had its own error handling so was left as-is.

## Why It Works

A transient error (e.g., a subprocess failing, a permission issue) in
one iteration no longer kills the loop. The warning log provides
visibility while the monitor continues collecting data on subsequent
iterations.

## Test Plan

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-10 12:24:43 +00:00
rltakashige 2204f651c8 Yield from reachability checks (#1427)
## Motivation

check_reachable waits for all connection profile checks to be completed.
Since there are retries on failures, this can take around 20s to
resolve, preventing any instances from showing up. This feels very slow
for UX, and it slows down distributed testing.

## Changes

Made check_reachable an async generator.

## Test Plan

### Manual Testing
Works for me at least.
2026-02-10 12:18:45 +00:00
rltakashige 4abdaaf74b Address GPU timeouts (#1429)
## Motivation

For large prompts and/or slow machines, users are running into GPU
timeout errors very often.

## Changes

Only during prefill, we eval distributed operations. We don't do this
during decode to maintain decode performance.
Raise the prefill step size to 8192 because now we can (we see a speedup
here).
We also now see a 2x speedup in pipeline parallel prefill by disabling
an unnecessary all_gather during prefill.

## Why It Works

GPU timeout errors happen in the Metal backend when GPU operations take
too long without making progress.
By isolating distributed operations, we can allow them to run without
any timeouts.

## Test Plan

### Manual Testing
Doesn't GPU timeout on 100k tokens on Minimax anymore. Also tested on
Kimi.

### Automated Testing
Needs more exo bench, but I think this is a good step in the right
direction.
2026-02-10 11:53:23 +00:00
ciaranbor 2fbdb27bb1 Handle config.json not found (image models) (#1408)
## Motivation

When downloading image models, a missing config.json file triggers a
FileNotFoundError inside download_file_with_retry. This error was being
caught by the generic except Exception handler and retried 3 times
before failing. Then, the whole thing would be retried from the start

## Changes

- src/exo/download/download_utils.py: Added FileNotFoundError to the
list of immediately-raised exceptions in download_file_with_retry,
alongside HuggingFaceAuthenticationError. This prevents useless retries
when a file genuinely doesn't exist on the remote.
- src/exo/master/api.py: Wrapped ModelCard.load(model_id) in a
try/except that converts failures into an HTTPException(400) with a
descriptive error message, giving API consumers a clear error response.

## Why It Works


- FileNotFoundError is a deterministic error — the file won't appear on
retry, so re-raising immediately avoids 3 wasted download attempts with
exponential backoff.
- Catching ModelCard.load() failures and returning a 400 HTTP response
prevents unhandled exceptions from surfacing as opaque 500 errors in the
API.

## Test Plan

### Manual Testing

Verified an image model not in model cards does not cause an infinite
error loop
2026-02-07 03:34:58 +00:00
ciaranbor 3f57416dbf Add image lightbox (#1414)
## Motivation

No way to view generated or attached images at full resolution in the
dashboard

## Changes

- New ImageLightbox.svelte — fullscreen overlay with download, close
(click-outside/Escape), and transitions
- ChatMessages.svelte — all images (input attachments + generated) are
now clickable to open in lightbox; added expand button to generated
image hover overlay

## Why It Works

Single expandedImageSrc state variable drives the lightbox — set it to
show, null to hide.

## Test Plan

### Manual Testing

  - Click any image (attachment thumbnail or generated) → lightbox opens
  - Close via Escape, click-outside, or close button
  - Download button saves with correct extension
2026-02-07 01:30:03 +00:00
rltakashige 8f3681cf7e Synchronize before warmup (#1419)
## Motivation

Maybe addresses #1303 

## Changes

Add an mx barrier before warmup

## Why It Works

It might, it might not. Shouldn't break anything that's not already
broken though.

## Test Plan

### Manual Testing
The two machines I tested on were fine on GLM 4.7 Flash 8bit (the one in
exo.log in the issue). Obviously not definitive for anything, however.

<img width="594" height="878" alt="image"
src="https://github.com/user-attachments/assets/534d3ad6-16ef-4cb5-b823-43c8d4e1d3c6"
/>
2026-02-07 00:14:19 +00:00
ciaranbor 9dc4f786bd Ciaran/image model listing (#1417)
## Motivation

Image models (FLUX, Qwen Image) had no family grouping or quantization
metadata in the dashboard

## Changes

- Added family, quantization, base_model, and capabilities fields to all
18 image model TOML cards (FLUX.1 variants + Qwen Image variants)
  - Added FLUX and Qwen Image SVG logos to FamilyLogos.svelte
- Added "flux" and "qwen-image" families to the sidebar and family sort
order
- Added "Image Gen" and "Image Edit" capability filters in
ModelFilterPopover.svelte
  - Added image edit icon/badge to ModelPickerGroup.svelte
- Made the model category sidebar scrollable to accommodate the new
entries
  - Hidden scrollbars on model list panels

## Why It Works

Reuses the existing family/quantization grouping infrastructure that
LLMs already use, extending it to image models with appropriate metadata
and icons

## Test Plan

### Manual Testing

Verified image models behave like text models in the model list dialog

---------

Co-authored-by: Alex Cheema <41707476+AlexCheema@users.noreply.github.com>
2026-02-06 16:08:57 -08:00
rltakashige dcb4cabc15 Update the nix hash for mlx 0.30.5 (#1416)
## Motivation

<!-- Why is this change needed? What problem does it solve? -->
<!-- If it fixes an open issue, please link to the issue here -->

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
<!-- - -->

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-02-06 21:27:10 +00:00
Jake Hillion d79b3a0e75 bench: make exo-bench available via nix run on all platforms (#1415)
exo-bench was gated behind isDarwin in python/parts.nix because it used
exoVenv, which pulls in MLX (Darwin-only). However, exo_bench.py is an
HTTP client that only needs loguru, transformers, huggingface-hub, and
tiktoken.

Made bench a uv workspace member with its own pyproject.toml declaring
only the minimal dependencies. Added a separate benchVenv in parts.nix
built from that workspace member, and moved exo-bench out of the
isDarwin block so it is available on all platforms.

Test plan:
- `nix run .#exo-bench -- --help` prints argparse help

---------

Co-authored-by: Ryuichi Leo Takashige <leo@exolabs.net>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-06 21:07:17 +00:00
Evan Quiney a2f1d48712 slow down catchup (#1407)
our event log request blasted the whole event log over libp2p, now it
just does the next 1000 messages - hopefully allowing nodes to catch up
a bit more consistently for long lived clusters

Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-06 20:45:27 +00:00
rltakashige 3b2f553a25 Fix kimi tool calling id (#1413)
## Motivation

Kimi produces its own tool id. It gets confused when we generate our own
id.

## Changes

Add id to tool call item and parse Kimi id properly.

## Test Plan

### Manual Testing
<img width="3198" height="522" alt="image"
src="https://github.com/user-attachments/assets/d71ec2be-7f57-49dc-a569-d304cc430f4d"
/>

Long running Kimi K2.5 cluster querying itself through OpenCode running
on the same Kimi K2.5 instance.
2026-02-06 11:33:51 -08:00
rltakashige 5455a97a8c Fix GLM4Moe Tensor Sharding (#1411)
## Motivation

Recent commit broke glm (non lite) sharding

## Why It Works

Assert is no longer hit, as isinstance check includes
GLM4MoeDecoderLayer.
Added type stubs to keep the type checker happy.

## Test Plan

### Manual Testing
Runs as expected without gibberish.
2026-02-06 16:53:15 +00:00
ciaranbor 6f0cb99919 Ciaran/flux1 kontext (#1394)
## Motivation

Add support for FLUX.1-Kontext-dev, an image editing variant of
FLUX.1-dev

## Changes

- New FluxKontextModelAdapter: Handles Kontext's image-to-image workflow
- encodes input image as conditioning latents with special position IDs,
generates from pure noise
- Model config: 57 transformer blocks (19 joint + 38 single), guidance
scale 4.0, ImageToImage task
- Pipeline updates: Added kontext_image_ids property to PromptData
interface, passed through diffusion runner
  - Model cards: Added TOML configs for base, 4-bit, and 8-bit variants
  - Dependency: mflux 0.15.4 → 0.15.5
- Utility: tmp/quantize_and_upload.py for quantizing and uploading
models to HuggingFace

## Test Plan

### Manual Testing

Works better than Qwen-Image-Edit
2026-02-06 16:20:31 +00:00
ciaranbor c8d3154f83 More image dimensions (#1395)
## Motivation

More dimensions for image generation

## Changes

- dashboard/src/lib/components/ImageParamsPanel.svelte: Added
"1024x1365" and "1365x1024" to the sizeOptions array
- dashboard/src/lib/stores/app.svelte.ts: Extended the size type in
ImageGenerationParams interface to include the two new dimension options
2026-02-06 15:59:06 +00:00
ciaranbor 63e9cc4fea Ciaran/num sync steps (#1396)
## Motivation

Allow users to directly configure num_sync_steps for distributed image
generation instead of deriving it from a factor of total steps.

## Changes

  - Added num_sync_steps field to AdvancedImageParams API (range 1-50)
- Changed model configs from num_sync_steps_factor: float to
num_sync_steps: int
  - Updated Flux/Qwen configs with direct values (1, 4, 7 respectively)
  - Added slider control in dashboard advanced params panel
  - Falls back to model default when not specified

## Why It Works

Decouples sync steps from inference steps, giving users direct control
over distributed inference synchronization while preserving sensible
defaults.

## Test Plan

### Manual Testing

  - Generate images with various sync step values via dashboard slider
  - Verify default behavior when parameter is unset
2026-02-06 15:51:46 +00:00
Evan Quiney 9b5cae3db6 auto bench (#1405)
runs exo_bench remotely with some nice git QoL

## usage
run tests/auto_bench.sh host1 [host2]

exo bench will be run on those hosts and its output saved to
bench/commit_hash/*.json on all models currently downloaded
2026-02-06 15:35:46 +00:00
Jake Hillion cf7201f91e pyproject: set minimum uv version
The uv.lock is churning constantly as different UV versions bounce it
between revisions. This is made worse by GitHub automatically hiding the
uv.lock changes, meaning it's hard to notice when this went wrong.

Set a minimum version for `uv` in pyproject.toml to fix this. I tried
quite a few versions (not all) and found 0.8.6 sets the revision to 3,
which I believe is the latest. This is from August 2025 so has been
around for a while.

Test plan:

```
jake@maverick:/data/users/jake/repos/exo/ > git checkout main uv.lock
jake@maverick:/data/users/jake/repos/exo/ > nix shell github:nixos/nixpkgs/3dce7f4a77812afd69efcbfe15e5223f98c5c69e#uv --command sh -c 'uv add pip --frozen && uv lock && uv remove pip --frozen && uv lock && uv --version'

Resolved 140 packages in 147ms
Added pip v26.0.1
Resolved 139 packages in 48ms
Removed pip v26.0.1
uv 0.8.6
```
2026-02-06 15:28:10 +00:00
rltakashige b315035ae0 Add minimax and fix qwen sharding strategies (#1318)
## Motivation

MiniMax tensor sharding does not provide equivalent outputs to running
it as a single node because RMSNorm weights cannot be split without
affecting the output.

Qwen3Next sharding was broken, and something with Qwen3MoE was likely
changed upstream, as several variables no longer exist.

This also ballooned into fixing prefix caching for non-standard models
as Qwen3Next was behaving weirdly.

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
Worked for a 8 hour long eval at the same performance and a more similar
completion/reasoning token distribution.

---------

Co-authored-by: Alex Cheema <41707476+AlexCheema@users.noreply.github.com>
Co-authored-by: Alex Cheema <alexcheema123@gmail.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: Evan <evanev7@gmail.com>
2026-02-06 13:26:59 +00:00
rltakashige c8dbbee27b skip tensor ring on bench (#1403)
## Motivation

<!-- Why is this change needed? What problem does it solve? -->
<!-- If it fixes an open issue, please link to the issue here -->

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
<!-- - -->

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-02-06 13:06:59 +00:00
rltakashige f0107e9670 Fix offline no cache (#1402)
## Motivation

In offline mode, exo complains if there is no caches directory, even if
the files are there.

## Changes

Check safetensors index and the directory structure to build caches
directory.

## Test Plan

### Manual Testing
<img width="2338" height="1102" alt="image"
src="https://github.com/user-attachments/assets/ad769911-399b-4fca-ac80-aeaa046af06b"
/>
<img width="656" height="1668" alt="image"
src="https://github.com/user-attachments/assets/6080986c-3904-4600-a340-8c70f1b33266"
/>
2026-02-06 12:57:01 +00:00
Hunter Bown 9f502793c1 fix: retry downloads on transient errors instead of breaking (#1398)
## Motivation

`download_file_with_retry()` has a `break` in the generic exception
handler that exits the retry loop after the first transient failure.
This means network timeouts, connection resets, and server errors all
cause an immediate download failure — the two remaining retry attempts
never run.

## Changes

**download_utils.py**: Replaced `break` with logging and exponential
backoff in the generic exception handler, matching the existing
rate-limit handler behavior.

Before:
```python
except Exception as e:
    on_connection_lost()
    if attempt == n_attempts - 1:
        raise e
    break  # exits loop immediately
```

After:
```python
except Exception as e:
    on_connection_lost()
    if attempt == n_attempts - 1:
        raise e
    logger.error(f"Download error on attempt {attempt + 1}/{n_attempts} ...")
    logger.error(traceback.format_exc())
    await asyncio.sleep(2.0**attempt)
```

## Why It Works

The `break` statement was bypassing the retry mechanism entirely.
Replacing it with the same log-and-backoff pattern used by the
`HuggingFaceRateLimitError` handler means all 3 attempts are actually
used before giving up. The exponential backoff (1s, 2s) gives transient
issues time to resolve between attempts.

## Test Plan

### Manual Testing
- Downloads that hit transient network errors now retry instead of
failing immediately

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes
- `uv run pytest src/exo/download/tests/ -v` — 11 tests pass

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-06 11:51:54 +00:00
Evan Quiney c8371349d5 add scripts (#1401)
allow running exo-bench and the headless runner from nix
2026-02-06 11:06:40 +00:00
Evan Quiney 6b907398a4 cancel downloads for deleted instances (#1393)
after deleting an instance, if a given (node_id, model_id) pair doesn't exist in the left over instances, cancel the download of model_id on node_id.
2026-02-05 18:16:43 +00:00
Evan Quiney 572e647908 better cancellation (#1388)
a lot of our cleanup logic wasn't running leading to bad shutdown states

## changes
- added `try: except` blocks around most task groups
- made the runner shutdown code synchronous
- abandon the MpReceiver's recv_async thread on cancellation
- this only occurs during runner shutdown, the queue closing from the
other end should terminate the mp.Queue, cleaning up the thread in its
own time. i could try other methods if this is not sufficient.

## outcome
ctrl-c just works now! minus the tokio panic of course :) no more
hypercorn lifespan errors though!
2026-02-05 15:22:33 +00:00
Evan Quiney e59ebd986d set exo as the nix default package (#1391)
!!!
2026-02-05 15:15:52 +00:00
Alex Cheema 5c2f29f3f2 feat: show download availability in model picker (#1377)
## Motivation

Users browsing models in the picker need to know which models are
already downloaded and ready to run on their cluster, without having to
check the downloads page separately.

## Changes

- **ModelPickerModal.svelte**: Computes per-model download availability
by checking which nodes have `DownloadCompleted` entries and summing
their total RAM against the model's storage size. Passes availability
data to `ModelPickerGroup`. Enhances the info modal with a "Downloaded
on:" section showing node friendly names with green badges.
- **ModelPickerGroup.svelte**: Accepts new `downloadStatus` prop. Shows
a green checkmark-in-circle icon next to models that are downloaded on
sufficient nodes. Tooltip shows which nodes have the model.
- **+page.svelte**: Passes `downloadsData` and `topologyNodes` to
`ModelPickerModal`.

## Why It Works

The download state from `/state` already tracks per-node completed
downloads. The shared `getNodesWithModelDownloaded()` utility (from PR
#1375) finds nodes with `DownloadCompleted` entries for each model.
Total RAM is summed from the topology node data (using `ram_total`, not
`ram_available`) and compared to the model's `storage_size_megabytes` to
determine if there's enough aggregate memory. This is intentionally a
simple heuristic — not a full placement preview.

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
- Open the model picker modal
- Verify downloaded models show a green checkmark icon
- Verify the checkmark appears dimmer for models downloaded on nodes
with insufficient total RAM
- Click the (i) info button on a downloaded model
- Verify "Downloaded on:" section appears with correct node names
- Verify models with no downloads show no indicator

### Automated Testing
- Dashboard builds successfully (`npm run build`)
- No new Python changes requiring type checking

> **Note:** This is a chained PR. Base branch is
`alexcheema/topology-download-indicators` (#1375).

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-05 14:32:53 +00:00
Alex Cheema db400dbb75 skip continuous batching tests pending type migration
The continuous batching runner architecture references old types
(ChatCompletion, ChatCompletionTaskParams) that were renamed on main.
Skip the test module until the batch engine code is updated.

Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-05 06:18:40 -08:00
Alex Cheema 15fad9c632 Merge remote-tracking branch 'origin/main' into alexcheema/continuous-batching
# Conflicts:
#	.mlx_typings/mlx_lm/tokenizer_utils.pyi
#	src/exo/worker/runner/runner.py
#	src/exo/worker/runner/runner_supervisor.py
#	src/exo/worker/tests/unittests/test_runner/test_event_ordering.py
2026-02-05 06:12:49 -08:00
Alex Cheema ffe6396c91 Add Qwen3-Coder-Next model cards (#1367)
## Motivation

Qwen3-Coder-Next just dropped on mlx-community in several quantizations.
It's an 80B MoE model (Qwen3NextForCausalLM) which we already have
tensor parallelism support for via QwenShardingStrategy — just needs
model cards.

## Changes

Added model cards for all 5 available quantizations:
- `mlx-community/Qwen3-Coder-Next-4bit` (~46GB)
- `mlx-community/Qwen3-Coder-Next-5bit` (~58GB)
- `mlx-community/Qwen3-Coder-Next-6bit` (~69GB)
- `mlx-community/Qwen3-Coder-Next-8bit` (~89GB)
- `mlx-community/Qwen3-Coder-Next-bf16` (~158GB)

All with `supports_tensor = true` since the architecture is already
supported.

## Why It Works

`Qwen3NextForCausalLM` is already handled by QwenShardingStrategy in
auto_parallel.py and is in the supports_tensor allowlist in
model_cards.py. No code changes needed — just the TOML card files.

## Test Plan

### Manual Testing
<!-- n/a - model card addition only -->

### Automated Testing
- `basedpyright` — 0 errors
- `ruff check` — passes
- `nix fmt` — no changes
- `pytest` — 173 passed, 1 skipped


🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-05 13:37:18 +00:00
Jake Hillion 3a9baeb9db EXO: add CLI flags for root install/uninstall
The macOS app required user interaction via AppleScript prompts to
install or uninstall network configuration components, making automated
deployments difficult.

Added --install and --uninstall command line flags that execute the
network setup scripts directly when running as root, bypassing GUI
prompts. Created a new main.swift entry point that parses CLI arguments
and delegates to NetworkSetupHelper's new direct execution methods.

This enables headless installation via `sudo EXO --install` for
automated deployment scenarios while preserving the existing GUI
behavior when launched normally.

Test plan:

- Deployed to a machine that didn't have the content installed. Got
  blocked on the popup and EXO never launched.
- Relaunched EXO, confirmed it still never starts because of the popup.
- Ran `sudo /Applications/EXO.app/Contents/MacOS/EXO --install`
- Launched EXO - the API started as expected.
- Ran `sudo /Applications/EXO.app/Contents/MacOS/EXO --uninstall`
- Launched EXO - got the popup.
2026-02-05 13:27:46 +00:00
Alex Cheema 01b86a9e81 feat: add uncertainty visualization with token-level logprobs (#1180)
## Motivation

Adds uncertainty visualization to the chat interface, allowing users to
see token-level confidence scores and regenerate responses from any
point in the generation. This enables users to:
- Understand model confidence at each token
- Explore alternative completions by regenerating from uncertain tokens
- Debug and analyze model behavior

## Changes

### Uncertainty Visualization
- Add `TokenHeatmap` component showing token-level probability coloring
- Toggle uncertainty view per message with bar chart icon
- Display tooltip with probability, logprob, and top alternative tokens
on hover

### Regenerate from Token
- Add "Regenerate from here" button in token tooltip
- Use `continue_final_message` in chat template to continue within same
turn (no EOS tokens)
- Add `continue_from_prefix` flag to `ChatCompletionTaskParams`

### Request Cancellation
- Add `AbortController` to cancel in-flight requests when regenerating
mid-generation
- Handle `BrokenResourceError` server-side when client disconnects
gracefully

### Additional APIs
- Add Claude Messages API support (`/v1/messages`)
- Add OpenAI Responses API support (`/v1/responses`)

## Why It Works

- **Proper continuation**: Using `continue_final_message=True` instead
of `add_generation_prompt=True` keeps the assistant turn open, allowing
the model to continue naturally from the prefix without end-of-turn
markers
- **Clean cancellation**: AbortController aborts the HTTP request, and
server catches `BrokenResourceError` to avoid crashes
- **Stable hover during generation**: TokenHeatmap tracks hover by index
(stable across re-renders) with longer hide delay during generation

## Test Plan

### Manual Testing
<!-- Hardware: MacBook Pro M1 -->
- Send a message and verify logprobs are collected
- Enable uncertainty view and verify token coloring based on probability
- Hover over tokens to see tooltip with alternatives
- Click "Regenerate from here" on a token mid-response
- Verify the response continues naturally from that point
- Verify aborting mid-generation and regenerating works without server
crash

### Automated Testing
- Added tests for Claude Messages API adapter
- Added tests for OpenAI Responses API adapter

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: Evan <evanev7@gmail.com>
2026-02-05 05:21:26 -08:00
rltakashige 221640a65b Acknowledge task after runner status is updated (#1381)
## Motivation

Duplicate tasks are still observed.

## Changes

Moved task acknowledgement to after the runner has changed its status.

## Why It Works

Tasks now remain pending until the runner has updated its status.

## Test Plan

### Manual Testing
Seems to work fine from manual testing. Hard to test a race condition
though.

### Automated Testing
Updated the event ordering test.
2026-02-05 12:00:37 +00:00
ciaranbor 6177550c34 Ciaran/parallel cfg (#1361)
## Motivation

Enable parallel classifier-free guidance (CFG) for Qwen image models.
CFG requires two forward passes (positive/negative prompts) - this
allows them to run on separate nodes simultaneously, reducing latency.

## Changes

  - Added uses_cfg flag to ModelCard to identify CFG-based models
- Extended PipelineShardMetadata with CFG topology fields (cfg_rank,
cfg_world_size, peer device info)
- Updated placement to create two CFG groups with reversed ordering
(places CFG peers as ring neighbors)
- Refactored DiffusionRunner to process CFG branches separately with
exchange at last pipeline stage
- Added get_cfg_branch_data() to PromptData for single-branch embeddings
  - Fixed seed handling in API for distributed consistency
  - Fixed image yield to only emit from CFG rank 0 at last stage
  - Increased num_sync_steps_factor from 0.125 to 0.25 for Qwen

## Why It Works

- 2 nodes + CFG: Both run all layers, process different CFG branches in
parallel
  - 4+ even nodes + CFG: Hybrid - 2 CFG groups × N/2 pipeline stages
  - Odd nodes or non-CFG: Falls back to pure pipeline parallelism
 
 Ring topology places CFG peers as neighbors to enable direct exchange.

## Test Plan

### Manual Testing

Verified performance gain for Qwen-Image for 2 node and 4 node cluster.
Non-CFG models still work

### Automated Testing
 
Added tests in test_placement_utils.py covering 2-node CFG parallel,
4-node hybrid, odd-node fallback, and non-CFG pipeline modes.
2026-02-04 21:16:35 +00:00
Evan Quiney 7b6cad94c6 add resources dir to nix (#1376)
add resources directory to the nix exo package, and fixes the env for the dashboard dir
2026-02-04 16:38:43 +00:00
Alex Cheema 41ed7afb3b feat: add model picker modal with grouped models and HF Hub search (#1369)
## Motivation

Reimplements the model picker modal from #1191 on top of the custom
model support branch. Replaces the inline model dropdown with a
full-featured modal that groups models by base model, supports
filtering, favorites, and HuggingFace Hub search.

## Changes

**Backend:**
- Add `family`, `quantization`, `base_model`, `capabilities` metadata
fields to `ModelCard` and all 40 TOML model cards
- Pass new fields through `ModelListModel` and `get_models()` API
response
- Add `GET /models/search` endpoint using
`huggingface_hub.list_models()`

**Dashboard (7 new files):**
- `ModelPickerModal.svelte` — Main modal with search, family filtering,
HuggingFace Hub tab
- `ModelPickerGroup.svelte` — Expandable model group row with
quantization variants
- `FamilySidebar.svelte` — Vertical sidebar with family icons (All,
Favorites, Hub, model families)
- `FamilyLogos.svelte` — SVG icons for each model family
- `ModelFilterPopover.svelte` — Capability and size range filters
- `HuggingFaceResultItem.svelte` — HF search result item with
download/like counts
- `favorites.svelte.ts` — localStorage-backed favorites store

**Integration:**
- Replace inline dropdown in `+page.svelte` with button that opens
`ModelPickerModal`
- Custom models shown in Hub tab with delete support

**Polish:**
- Real brand logos (Meta, Qwen, DeepSeek, OpenAI, GLM, MiniMax, Kimi,
HuggingFace) from Simple Icons / LobeHub
- Clean SVG stroke icons for capabilities (thinking, code, vision, image
gen)
- Consistent `border-exo-yellow/10` borders, descriptive tooltips
throughout
- Cluster memory (used/total) shown in modal header
- Selected model highlight with checkmark for both single and
multi-variant groups
- Cursor pointer on all interactive elements, fix filter popover
click-outside bug
- Custom models now appear in All tab alongside built-in models

## Bug Fix: Gemma 3 EOS tokens

Also included in this branch: fix for Gemma 3 models generating infinite
`<end_of_turn>` tokens. The tokenizer's `eos_token_ids` was missing
token ID 106 (`<end_of_turn>`), so generation never stopped. The fix
appends this token to the EOS list after loading the tokenizer. Also
handles `eos_token_ids` being a `set` (not just a `list`).

## Why It Works

Model metadata (family, capabilities, etc.) is stored directly in TOML
cards rather than derived from heuristics, ensuring accuracy. The modal
groups models by `base_model` field so quantization variants appear
together. Custom models are separated into the Hub tab since they lack
grouping metadata.

## Test Plan

### Manual Testing
- Open dashboard, click model selector to open modal
- Browse models by family sidebar, search, and filters
- Expand model groups to see quantization variants
- Star favorites and verify persistence across page reloads
- Navigate to Hub tab, search and add models
- Verify error messages shown for invalid model IDs
- Run a Gemma 3 model and verify generation stops at `<end_of_turn>`

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes
- `nix fmt` — clean
- `uv run pytest src/` — 173 passed
- `cd dashboard && npm run build` — builds successfully

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-04 05:56:23 -08:00
Alex Cheema 2063278906 feat: add custom HuggingFace model support (#1368)
## Motivation

Users should be able to run any HuggingFace model, not just the ones we
ship TOML cards for. Continues the aim of #1191 with a minimal
implementation on top of the current TOML model card system.

Custom cards are saved to `~/.exo/custom_model_cards/` rather than the
bundled `resources/inference_model_cards/` because `RESOURCES_DIR` is
read-only in PyInstaller bundles (`sys._MEIPASS`). This also fixes
`fetch_from_hf` which was saving cards to the wrong path (`resources/`
root instead of `resources/inference_model_cards/`).

## Changes

- Add `EXO_CUSTOM_MODEL_CARDS_DIR` constant
(`~/.exo/custom_model_cards/`)
- Update `model_cards.py`: add custom dir to search path, fix
`save_to_custom_dir`, add `delete_custom_card`/`is_custom_card`
- Add `POST /models/add` and `DELETE /models/custom/{model_id}` API
endpoints
- Add `is_custom` field to `ModelListModel` API response
- Dashboard: add custom model input form in dropdown, delete button for
custom models, show actual API errors, auto-select newly added model

## Why It Works

Two separate directories for model cards: the bundled read-only
`resources/inference_model_cards/` for built-in cards, and user-writable
`~/.exo/custom_model_cards/` for custom cards. Both are scanned when
listing models. This works in all environments including PyInstaller
bundles where `RESOURCES_DIR` points to `sys._MEIPASS`.

## Test Plan

### Manual Testing
- Add a custom model via the dropdown (e.g.
`mlx-community/Llama-3.2-1B-Instruct-4bit`)
- Verify it appears in the model list with the delete (x) button
- Delete it and verify it disappears
- Try adding an invalid model ID and verify the actual error is shown

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes
- `uv run pytest src/` — passes
- `cd dashboard && npm run build` — builds

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-04 05:06:15 -08:00
rltakashige a0f4f36355 Reduce reliance on internet (#1363)
## Motivation

Offline users currently have to wait for every retry to fail before
being able to launch a model.
For users that restart clusters often or share API keys between devices,
we also spam HuggingFace with downloads every 5 minutes.
These issues are caused by _emit_existing_download_progress being
inefficient.

## Changes

- Only query HuggingFace once while EXO is running (assumption being
that a change should only be reflected on a new EXO session)
- Only query HuggingFace when there is an internet connection (polling
connectivity every 10 seconds)
- Request download progress if we switch from no connectivity ->
connected to reduce the wait.
- Reduce download progress sleep as it's no longer expensive (queries
cache most of the time).
- Reduce retries as 30 is way too many.

## Test Plan

### Manual Testing
Manually tested the behaviour.

### Automated Testing
None, should I add any? We do have some tests for this folder, but they
are probably not too helpful.
2026-02-03 20:03:29 +00:00
Alex Cheema acb97127bf Normalize TextGenerationTaskParams.input to list[InputMessage] (#1360)
## Motivation

With the addition of the Responses API, we introduced `str |
list[InputMessage]` as the type for `TextGenerationTaskParams.input`
since the Responses API supports sending input as a plain string. But
there was no reason to leak that flexibility past the API adapter
boundary — it just meant every downstream consumer had to do `if
isinstance(messages, str):` checks, adding complexity for no benefit.

## Changes

- Changed `TextGenerationTaskParams.input` from `str |
list[InputMessage]` to `list[InputMessage]`
- Each API adapter (Chat Completions, Claude Messages, Responses) now
normalizes to `list[InputMessage]` at the boundary
- Removed `isinstance(task_params.input, str)` branches in
`utils_mlx.py` and `runner.py`
- Wrapped string inputs in `[InputMessage(role="user", content=...)]` in
the warmup path and all test files

## Why It Works

The API adapters are the only place where we deal with raw user input
formats. By normalizing there, all downstream code (worker, runner, MLX
engine) can just assume `list[InputMessage]` and skip the type-checking
branches. The type system (`basedpyright`) catches any missed call sites
at compile time.

## Test Plan

### Automated Testing
- `uv run basedpyright` — 0 errors
- `uv run ruff check` — passes
- `nix fmt` — applied
- `uv run pytest` — 174 passed, 1 skipped

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-03 06:01:56 -08:00
Evan Quiney d90605f198 migrate model cards to .toml files (#1354) 2026-02-03 12:32:06 +00:00
Evan Quiney f400b4d7c5 fix InstanceViewModel.swift (#1359)
wasn't caught when we merged the API changes
2026-02-02 18:43:27 +00:00
Evan Quiney d97bca88e6 improve distributed testing (#1300)
Our distributed test now does a full query cycle for every model loaded
onto the relevant machine. This will help find bugs early, as it already
has found one with Qwen3 Next! I didn't write down what the error was
though. Gooooooood luck with that!

Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-02 18:25:39 +00:00
Alex Cheema dfce188d99 fix: handle unclosed tool calls and GLM arg parsing edge cases (#1344)
## Motivation

Tool-call requests can hang indefinitely when `max_tokens` truncates
generation mid-tool-call.

## Reproduction

1. Send a chat completion with `tools` and a low `max_tokens` (e.g. 65)
to Qwen3-0.6B
2. Model generates `<think>...</think>` then starts `<tool_call>` but
`max_tokens` cuts it off before `</tool_call>`
3. **Before this fix:** `parse_tool_calls` buffers tokens after
`<tool_call>`, generator exhausts, buffered tokens (including
`finish_reason`) are silently dropped → stream hangs forever
4. **After this fix:** buffered tokens are flushed as regular text with
`finish_reason` propagated → response returns normally with
`finish_reason: "length"`

Confirmed with fresh local testing: 4 unclosed tool call flushes
triggered in a single session. Also confirmed via production logs from
Jan 29 (2 occurrences).

## Changes

1. **`parse_tool_calls` unclosed tool call flush** — when the generator
exhausts inside an open `<tool_call>` block, flush buffered tokens as
regular text and propagate `finish_reason`
2. **GLM regex fix** — match literal `\n` (not escaped `\\n`) between
arg tags; handle missing `</arg_value>` via lookahead
3. **7 new unit tests** for `parse_tool_calls` covering unclosed,
closed, passthrough, and failed-parse scenarios

## Why It Works

- `parse_tool_calls` now has a post-loop check: if `in_tool_call` is
still true, it yields the buffered text with the tracked `finish_reason`
instead of silently dropping it
- The GLM regex now matches real-world output where newlines appear
between tags and `</arg_value>` may be absent

## Test Plan

### Manual Testing
- Qwen3-0.6B-4bit with `tools` + various `max_tokens` values (61-75)
- Confirmed responses return with `finish_reason: "length"` instead of
hanging
- Log output shows `"generator exhausted inside unclosed tool call,
flushing buffered text"`

### Automated Testing
- 7 new tests in `test_parse_tool_calls.py`
- Full test suite passes (`uv run pytest`)

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: Ryuichi Leo Takashige <leo@exolabs.net>
Co-authored-by: Evan <evanev7@gmail.com>
Co-authored-by: Jake Hillion <jake@hillion.co.uk>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-02-02 17:45:51 +00:00
Evan Quiney 54b19879a0 create config home when checking for config file (#1353)
we didn't check before, raising a critical exception.
now we create ~/.config/exo on linux systems before touching config.toml.

this wasn't caught before since everything lives in ~/.exo on macos, and we no longer write the keypair to CONFIG_HOME, so config.toml has to do init work it avoided before.
2026-02-02 17:36:51 +00:00
ciaranbor 19965c7ba5 Ciaran/profiling (#1345)
## Motivation

Know what the hell is going on

## Changes

- Tracing library (src/exo/shared/tracing.py): trace() context manager,
Chrome Trace Format export, statistics computation
- Runner instrumentation
(src/exo/worker/engines/image/pipeline/runner.py): Wrapped sync/async
steps, compute blocks, and send/recv operations
- Trace collection: Workers send traces to master after task completion;
merged into ~/.exo/traces/trace_{task_id}.json
  - API endpoints: List, fetch, stats, and raw download at /v1/traces/*
  - Dashboard: Trace list and detail pages with Perfetto integration

## Why It Works

<img width="1236" height="767" alt="Screenshot 2026-01-30 at 19 00 09"
src="https://github.com/user-attachments/assets/73e6e46d-ba10-4e83-ba99-ff1c3f62ab05"
/>
<img width="1659" height="89" alt="Screenshot 2026-01-30 at 19 00 58"
src="https://github.com/user-attachments/assets/c0fd0e65-e4fc-4fd5-920d-b43b2887d591"
/>
2026-02-02 17:19:45 +00:00
Evan Quiney 3e27ead705 remove mdns discovered peers from appearing in state (#1312)
## motivation
eagerly discovered peers through gossipsub were added to state. this left things looking broken from one-sided connections

## changes
the worker no longer writes topology edges from these gossipsub messages
we now strictly rely on http-discovered topology, which tends to be more reflective of the actual state of the systems connectivity
2026-02-02 16:58:53 +00:00
Alex Cheema d826d309b3 chore: gitignore hosts_*.json files (#1343)
## Motivation

`hosts_*.json` files are local host configuration snapshots that
shouldn't be tracked in version control.

## Changes

Added `hosts_*.json` pattern to `.gitignore`.

## Why It Works

The glob pattern `hosts_*.json` matches any file starting with `hosts_`
and ending with `.json` in the repo root.

## Test Plan

### Manual Testing
- Verified that `hosts_*.json` files are ignored by git after this
change.

### Automated Testing
- No automated tests needed for a `.gitignore` change.

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-02-02 16:14:11 +00:00
Alex Cheema c3537980bd feat: add Claude Messages API and OpenAI Responses API support (#1167)
## Motivation

Add support for Claude Messages API and OpenAI Responses API to allow
users to interact with exo using these popular API formats. This enables
broader compatibility with existing tooling and SDKs that expect these
API formats.

## Architecture

Adapter logic lives exclusively in the API layer
(`src/exo/master/adapters/`). On the way in, each adapter converts its
API-specific request type (`ChatCompletionRequest`,
`ClaudeMessagesRequest`, `ResponsesRequest`) into
`TextGenerationTaskParams`. On the way out, each adapter converts the
`TokenChunk` stream back into its API-specific response format.
Everything inside the application — commands, worker, runner, event
sourcing — only sees `TextGenerationTaskParams` and `TokenChunk`. No
API-specific types cross the boundary.

```
                          API layer                         │  Application internals
                                                            │
Chat Completions → [adapter] → TextGenerationTaskParams ──→ │ ──→ TextGeneration command → Runner → TokenChunk ──→ │ ──→ [adapter] → ChatCompletionResponse
Claude Messages  → [adapter] → TextGenerationTaskParams ──→ │ ──→ TextGeneration command → Runner → TokenChunk ──→ │ ──→ [adapter] → ClaudeMessagesResponse
Responses API    → [adapter] → TextGenerationTaskParams ──→ │ ──→ TextGeneration command → Runner → TokenChunk ──→ │ ──→ [adapter] → ResponsesResponse
```

## Changes

### New Files
- `src/exo/shared/types/claude_api.py` - Pydantic types for Claude
Messages API
- `src/exo/shared/types/openai_responses.py` - Pydantic types for OpenAI
Responses API
- `src/exo/shared/types/text_generation.py` - Shared
`TextGenerationTaskParams` internal type
- `src/exo/master/adapters/chat_completions.py` - Chat Completions
adapter (streaming/non-streaming)
- `src/exo/master/adapters/claude.py` - Claude Messages adapter
(streaming/non-streaming)
- `src/exo/master/adapters/responses.py` - OpenAI Responses adapter
(streaming/non-streaming)

### Modified Files
- `src/exo/master/api.py` - Refactored to use adapters uniformly for all
endpoints; extracted `_resolve_and_validate_text_model` helper to
deduplicate model validation across all text endpoints; removed ad-hoc
`try/except ValueError` blocks from non-streaming paths

### New Endpoints
- `POST /v1/messages` - Claude Messages API (streaming and
non-streaming)
- `POST /v1/responses` - OpenAI Responses API (streaming and
non-streaming)

## Why It Works

All APIs are implemented as pure conversion adapters at the edge of the
application:
1. Adapter functions in `src/exo/master/adapters/` convert incoming
requests to `TextGenerationTaskParams`
2. `api.py` wraps the params in a `TextGeneration` command and sends it
through the existing command/event flow
3. The worker, runner, and event sourcing layers only handle
`TextGenerationTaskParams` and `TokenChunk` — they have no awareness of
Chat Completions, Claude, or Responses API formats
4. On response, adapter functions convert the `TokenChunk` stream back
to the caller's expected format
5. Model validation is handled by a single shared helper
(`_resolve_and_validate_text_model`), mirroring the existing
`_validate_image_model` pattern for image endpoints

No changes to core inference logic were needed.

### Streaming Formats
- **Chat Completions**: Uses `data: {...}\n\n` with `[DONE]` terminator
- **Claude**: Uses event types `message_start`, `content_block_start`,
`content_block_delta`, `content_block_stop`, `message_delta`,
`message_stop`
- **OpenAI Responses**: Uses event types `response.created`,
`response.in_progress`, `response.output_item.added`,
`response.content_part.added`, `response.output_text.delta`,
`response.output_text.done`, `response.content_part.done`,
`response.output_item.done`, `response.completed`

## Test Plan

### Manual Testing
Hardware: MacBook Pro M3 Max

**Non-streaming tests:**
```bash
# Chat Completions API
curl -X POST http://localhost:52415/v1/chat/completions \
  -H "Content-Type: application/json" \
  -d '{"model": "llama-3.2-1b", "messages": [{"role": "user", "content": "Hello"}], "max_tokens": 20}'

# Claude Messages API
curl -X POST http://localhost:52415/v1/messages \
  -H "Content-Type: application/json" \
  -d '{"model": "llama-3.2-1b", "max_tokens": 50, "messages": [{"role": "user", "content": "Hello"}]}'

# OpenAI Responses API
curl -X POST http://localhost:52415/v1/responses \
  -H "Content-Type: application/json" \
  -d '{"model": "llama-3.2-1b", "input": "Hello", "max_output_tokens": 20}'
```

**Streaming tests:**
```bash
# Chat Completions API (streaming)
curl -N -X POST http://localhost:52415/v1/chat/completions \
  -H "Content-Type: application/json" \
  -d '{"model": "llama-3.2-1b", "messages": [{"role": "user", "content": "Hello"}], "stream": true, "max_tokens": 20}'

# Claude Messages API (streaming)
curl -N -X POST http://localhost:52415/v1/messages \
  -H "Content-Type: application/json" \
  -d '{"model": "llama-3.2-1b", "max_tokens": 50, "messages": [{"role": "user", "content": "Hello"}], "stream": true}'

# OpenAI Responses API (streaming)
curl -N -X POST http://localhost:52415/v1/responses \
  -H "Content-Type: application/json" \
  -d '{"model": "llama-3.2-1b", "input": "Hello", "stream": true, "max_output_tokens": 20}'
```

All endpoints tested successfully with proper response formats and
streaming events.

### Automated Testing
- Tests in `src/exo/master/tests/` all pass (85 tests)
- Type checker (basedpyright) passes with 0 errors
- Linter (ruff) passes

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: Evan <evanev7@gmail.com>
2026-02-02 15:58:37 +00:00
rltakashige 21d477f1cb Update exo bench (#1357)
## Motivation

Make exo bench faster for longer prompts, lengthen default timeouts and
use pairs for pp and tg.

## Changes

- Uses binary search to find correct prompt
- Flag to force all combinations if that is desired
2026-02-02 15:46:15 +00:00
Jake Hillion b2579c78fe nix: add macmon to PATH in wrapper scripts on Darwin
`nix run .#exo` couldn't find `macmon` because the Nix wrapper scripts
didn't include it in PATH, causing `shutil.which("macmon")` to fail.

Added `--prefix PATH : ${pkgs.macmon}/bin` to the `makeWrapper` call,
conditional on Darwin via `lib.optionalString`, so macmon's binary is
available at runtime without modifying the user's system PATH.

Test plan:
- Verified `nix build .#exo` succeeds
- Checked wrapper script contains macmon store path in PATH prefix
2026-02-02 13:42:36 +00:00
Evan Quiney cd946742f7 fix skipping logic in worker plan (#1342)
the worker plan function had some skipping logic missing, leading to
double-submitting tasks.
2026-01-30 14:31:40 +00:00
rltakashige a5bc38ad1f Check all nodes to evict (#1341)
## Motivation

If nodes have uneven memory, one node may evict cache that remains on
another node. This will break prefill on some setups.

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
<!-- - -->

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-01-30 13:42:09 +00:00
Evan Quiney 2a4e0d4629 make node-ids unique per-session (#1338)
we currently have no strict reuqirements that node ids persist across
sessions, so we can generate fresh nodeids each time

this avoids issues like #1332, but prevents further features such as
caching downloads or node-id dialling

Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-01-30 13:33:31 +00:00
Evan Quiney 46a14153dd switch to ModelCard.load outside of download log (#1339)
some attempts to load model cards (i.e. build_base_shard) always went
through networking rather than using downloaded model cards. we should
always default to ModelCard.load in these scenarios
2026-01-30 11:20:20 +00:00
Evan 9ba61f3733 improve log message in shard downloader
closes #1336
2026-01-30 10:35:01 +00:00
rltakashige d9eca75895 Add usage stats (#1333)
## Motivation

(Probably) the final missing piece of the Chat Completions API 

## Changes

Add UsageStats 

## Why It Works

OpenCode reviewed my PR and gave me stats:

<img width="1150" height="802" alt="image"
src="https://github.com/user-attachments/assets/ebc06bae-797f-4087-87d5-2f26cf60fc48"
/>


## Test Plan

### Automated Testing
No tests were broken.
2026-01-30 10:23:08 +00:00
rltakashige 9dabde7e57 Fix bench after recent updates (#1331)
## Motivation

A lot of changes happened without much attention to the state of exo
bench.

## Changes

Use TaggedModel for BenchChatCompletion so it serialises properly.
Don't break after gpt oss tool call to preserve parity with the rest of
the codebase.

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<img width="2856" height="678" alt="image"
src="https://github.com/user-attachments/assets/2e18cf0d-c0f8-467c-9763-1a6a59c8a327"
/>

Also tested GPT OSS tool calling in OpenCode
2026-01-29 19:14:40 +00:00
ciaranbor a31942ce12 Ciaran/image non streaming (#1328)
## Motivation

The dashboard UI attempted to parse all image generation responses as
SSE streams, even when streaming was disabled. This broke non-streaming
image generation.

## Changes

- Parse JSON responses directly when not streaming, use SSE parser only
when stream=true AND partialImages > 0
- explicitly disable partial images when not streaming

## Why It Works

Both API and dashboard now use the same condition (stream &&
partialImages > 0) to determine response format, ensuring correct
parsing.

## Test Plan

### Manual Testing

Non-streamed image generation results appear in the UI. Streamed image
generation still works
2026-01-29 17:24:32 +00:00
Alex Cheema 7cc313b22a Treat Swift/Xcode build warnings as errors (#1322)
## Motivation

Warnings that go unchecked tend to accumulate and hide real issues.
Treating them as errors ensures they are addressed immediately, both
locally during development and in CI.

## Changes

Added `SWIFT_TREAT_WARNINGS_AS_ERRORS = YES` and
`GCC_TREAT_WARNINGS_AS_ERRORS = YES` to the **project-level** Debug and
Release build configurations in `project.pbxproj`. This applies to all
targets (EXO, EXOTests, EXOUITests).

## Why It Works

Xcode's `SWIFT_TREAT_WARNINGS_AS_ERRORS` and
`GCC_TREAT_WARNINGS_AS_ERRORS` build settings promote Swift and C/ObjC
warnings to errors at compile time. Setting them at the project level
means all targets inherit the policy without needing per-target or
CI-level overrides.

## Test Plan

### Manual Testing
- Built the EXO scheme in Release configuration with `xcodebuild` — no
warning-as-error failures from Swift or C/ObjC sources.

### Automated Testing
- CI already builds with `-configuration Release`, so it will
automatically enforce warnings-as-errors via the inherited project
settings — no CI changes needed.
2026-01-29 17:15:49 +00:00
rltakashige 2837225dc7 Load pipeline layers sequentially (#1329)
## Motivation

Slightly annoyed by needing this change, but same story as for tensor
loading...
2026-01-29 17:08:38 +00:00
Jake Hillion e4c6a7dbb4 nix: add Python packaging with uv2nix
Add uv2nix to build Python packages from uv.lock. This creates a fully
Nix-managed Python environment with the Rust bindings injected via overlay.

Changes:
- Add pyproject-nix, uv2nix, and pyproject-build-systems flake inputs
- Create python/parts.nix with overlays to inject Nix-built Rust wheel
- Export packages.exo on macOS (wraps exo/exo-master/exo-worker with dashboard)
- Add checks.lint (ruff, all platforms) and checks.pytest (macOS only)
- Simplify CI typecheck job using nicknovitski/nix-develop action
- Delete .github/actions/typecheck composite action (no longer needed)
- Add no-build-package for MLX packages in pyproject.toml (use wheels)

The Python build is currently macOS-only since MLX requires Metal. Linux
support will be added once the pyproject dependencies are simplified.

Test plan:
- Run `nix flake check` on macOS to verify pytest and lint pass
- Build exo package on macOS: `nix build .#exo`
- Verify CI pipeline passes with simplified typecheck job
2026-01-29 16:35:58 +00:00
Evan b1e88a3d06 shfmt
adds shfmt, a shell formatter, and formats the bash files
2026-01-29 15:24:36 +00:00
Jake Hillion ebeddfb308 mlx: build with Nix (#1285)
In order to make testing and deployment simpler and more reproducible,
we want to provide a Nix derivation for our macOS .app build. We already
build the Rust and dashboard with Nix, but so far the Python has been
blocked because we haven't had an MLX build.

This change adds a Metal compiler derivation that uses `requireFile` to
be provided a NAR of the unfree macOS Metal compiler. It is documented
how to get this file, but effectively you have to trigger the download,
mount the DMG, and NAR the result. Once this is added to the store by
hash we can build MLX using it. The MLX build itself is quite self
explanatory.

Test plan:
- CI. We follow the instructions to grab the Metal compiler. Once this
is in Cachix we should really never do this again, and I can pin the
path too to ensure it doesn't leave.
- MLX tests run as part of the MLX derivation's build. They pass.
- `NIXPKGS_ALLOW_UNFREE=1 nix build .#mlx.passthru.tests.mlxTest
--impure --option sandbox false`

---------

Co-authored-by: Ryuichi Leo Takashige <leo@exolabs.net>
2026-01-29 14:07:00 +00:00
Alex Cheema 9111575997 Add startup delay and update network setup message (#1309)
## Summary
- Add 20-second startup delay to wait for macOS to finish network setup
after boot
- Update user-facing message to clarify the service configures local
networking, disables Thunderbolt Bridge (preventing packet storms), and
installs a Network Location

## Test plan
- [ ] Manual verification of Swift syntax
- [ ] Test network setup on macOS device after reboot

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-01-29 13:05:50 +00:00
Sami Khan ffacabe7e4 Fix uninstall button error (#1306)
## Motivation

Fix "Network setup script failed" error when clicking uninstall button
and resolve Xcode compiler warnings.

## Changes

- NetworkSetupHelper.swift: Add || true guards and explicit return 0 in
find_and_enable_thunderbolt_bridge to prevent script failures with set
-euo pipefail
- ThunderboltBridgeService.swift: Use withCString and
withUnsafeMutablePointer for Authorization API calls to fix pointer
lifetime warnings
- EXOApp.swift: Mark showNotification as nonisolated to fix main actor
isolation warning

## Why It Works

- The uninstall script's Thunderbolt re-enable function could exit
non-zero in edge cases (no bridges, no matches). Since this is a cleanup
step, failures should not abort uninstall.
- Swift requires explicit pointer lifetime management when passing
strings/structs to C APIs.
- showNotification is called from a nonisolated delegate method and uses
thread-safe APIs.

## Test Plan

### Manual Testing
Hardware: MacBook Pro

- Clicked Uninstall button, verified it completes without error
- Built in Xcode, verified no warnings   

### Automated Testing
N/A
2026-01-29 12:57:48 +00:00
rltakashige 9e58a57599 Add RDMA caveats to README.md (#1316)
## Motivation

Running RDMA from source is not well documented as is. Several
surprising things that took time to debug internally too.

App should be updated to detect MacOS versions in future.
2026-01-28 18:44:00 +00:00
Evan Quiney 748a026071 fix configdata validation for kimi-k2 (#1314)
## motivation
our shard downloader could not correctly fetch data for kimi-k2, as it
deferred some values to a text_config field.
## changes
config_data now prioritizes this field if it exists in information like
layer_count
2026-01-28 14:29:36 +00:00
Alex Cheema f1a2d054ec Update tagline to "Run frontier AI locally" (#1313)
- Update README tagline from "Run your own AI cluster at home with
everyday devices" to "Run frontier AI locally"
2026-01-28 12:38:14 +00:00
Alex Cheema b3c8f85fc8 Update MLX to 0.30.4 (#1311)
## Summary
- Bump mlx from 0.30.3 to 0.30.4

## Test plan
- [x] `uv lock` succeeds
- [x] Type checking passes (`uv run basedpyright`)
- [x] Run inference tests

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-28 04:30:21 -08:00
rltakashige a562114ba5 Add Kimi K2.5 support (#1302)
## Motivation

<!-- Why is this change needed? What problem does it solve? -->
<!-- If it fixes an open issue, please link to the issue here -->

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
<!-- - -->

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->

---------

Co-authored-by: Alex Cheema <41707476+AlexCheema@users.noreply.github.com>
2026-01-28 05:44:19 +00:00
Evan Quiney 991d278119 replace nix fmt with treefmt in just lint (#1301)
man evaluating the nix flake is so slow. treefmt speeeedy
2026-01-27 17:03:01 +00:00
rltakashige c55cbf6739 Add mlx lm style tensor sharding for Minimax (#1299)
## Motivation

Broken right now. We'll potentially add a better one later

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
Used for evals without any issue.

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-01-27 15:29:06 +00:00
Alex Cheema bd4f0bf048 Fix download speed/ETA display for re-downloads (#1294)
## Motivation

After the download verification fix, when files are re-downloaded due to
upstream changes (size mismatch), the download progress displays
correctly (completion %, bytes, file counts), but speed shows 0 B/s and
ETA shows "--" for both overall and per-file progress.

## Changes

- Modified `on_progress_wrapper` in `src/exo/download/download_utils.py`
to detect re-download scenarios
- Added re-download detection: when `curr_bytes < previous_downloaded`,
the file was deleted and download restarted
- On re-download: reset `start_time` to current time and set
`downloaded_this_session = curr_bytes`
- Added two tests to `test_download_verification.py` covering
re-download and continuing download scenarios

## Why It Works

The bug occurred because:
1. `file_progress` is initialized with the OLD local file size (e.g.,
1.5GB)
2. When `_download_file` detects size mismatch, it deletes the file and
starts fresh
3. Progress callback receives small `curr_bytes` (e.g., 8KB) but
compares against old size
4. `downloaded_this_session = 0 + (8KB - 1.5GB) = -1.5GB` (negative!)
5. Negative session bytes → 0 or negative speed → ETA shows "--"

The fix detects when `curr_bytes < previous_downloaded` (indicating
re-download started) and resets tracking to treat it as a fresh
download.

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
- Download a model, modify a file to change its size, restart exo,
verify speed/ETA display correctly during re-download

### Automated Testing
- Added `TestProgressResetOnRedownload` class with two tests:
- `test_progress_resets_correctly_on_redownload`: Verifies progress
resets correctly when re-download starts
- `test_progress_accumulates_on_continuing_download`: Verifies
continuing downloads still accumulate correctly
- All 11 download tests pass
- Type checking (basedpyright): 0 errors
- Linting (ruff): All checks passed

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-26 21:56:58 +00:00
rltakashige cd8c01b7c8 Fix kv prefix cache (#1262)
## Motivation

OpenCode sends very large prompts, most of which are repeated on the
next call.

## Changes

Add prefix caching, reducing average time in prefill (in testing) from
40 seconds to 4. This massively improves user experience.

Also evicts KV caches from this prefix cache in a LRU-style manner. 

## Why It Works

We no longer prefill repeatedly but rather use kv cache stored in
memory. A future update may want to use storage to make the prefix cache
larger.

## Test Plan

### Manual Testing
Tested speedup on OpenCode

### Automated Testing
Added a lot of tests

---------

Co-authored-by: David Hind <davehind@yahoo.co.uk>
2026-01-26 20:13:58 +00:00
rltakashige 59e991ce15 Only ignore message if actually empty (#1292)
## Motivation

<!-- Why is this change needed? What problem does it solve? -->
<!-- If it fixes an open issue, please link to the issue here -->

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
<!-- - -->

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-01-26 19:33:23 +00:00
ciaranbor ffba340e70 Ciaran/image quantization (#1272)
## Motivation

Enable users to select and use quantized variants (8-bit, 4-bit) of
image models

## Changes

Use exolabs HF org for image models

## Why It Works

Quantized versions have been uploaded to exolabs HF org

## Test Plan

Loaded and ran different quantized variants. Confirmed lower memory
usage and different outputs for the same seed. Verified chat completion
still works.
2026-01-26 19:25:05 +00:00
rltakashige 9968abe816 Leo/fix basic model shard (#1291)
## Motivation

Some models, on some configurations, would have several issues that
caused the model to be stuck on loading.

## Changes

Several loading issues were with upstream mlx lm shard loading for
tensor parallel.
GLM 4.7 Flash now uses GLM 4.7 Lite.
A final portion of the issues were from mlx memory not being properly
released before calling mx.eval(model), causing the system to run out of
memory.

## Test Plan

### Manual Testing
Done a bunch (thanks @AlexCheema), hopefully exhaustive. 

### Automated Testing
A bunch of automated testing is imminent but not landed yet.

---------

Co-authored-by: Alex Cheema <alexcheema123@gmail.com>
2026-01-26 17:49:09 +00:00
Alex Cheema 0e30b0830f Fix download system for upstream file changes (#1290)
## Motivation

When upstream files change on Hugging Face, exo's download system
doesn't detect the change and downloads get stuck. The only workaround
is deleting `~/.exo/models/` and the cache.

Root causes:
1. Existing files are never re-verified against remote metadata
2. File list cache is never invalidated, causing stale sizes to be used

## Changes

1. **Verify existing files against remote size** (`_download_file`):
Before returning early for existing files, verify the local file size
matches remote. If mismatched, delete and re-download. If network fails
(offline), fall back to trusting local file.

2. **Always try fresh file list first** (`fetch_file_list_with_cache`):
Always attempt to fetch fresh data from Hugging Face. On success, update
the cache. On failure, fall back to cached data if available.

3. **Clear cache on model delete** (`delete_model`): When a model is
deleted, also delete its cache entry to prevent stale metadata.

## Why It Works

- **Online**: Stale local files are detected via size mismatch and
re-downloaded. Fresh file list is always fetched and cache is updated.
- **Offline with cache**: Existing files are trusted. Cached file list
is used as fallback.
- **Offline without cache**: Fails gracefully (can't download without
knowing what files to get).

The size check is O(1) so there's no performance impact. Hash
verification still happens after download completes (existing behavior).

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
- Download a model, manually modify a local file's content, restart exo,
verify it re-downloads

### Automated Testing
Added 9 new tests in
`src/exo/download/tests/test_download_verification.py`:
- Re-download when file size changes upstream
- Skip download when file size matches
- Offline fallback uses local file
- Fetch fresh file list and update cache
- Fall back to cache when fetch fails
- Error propagates when no cache exists
- Model delete clears cache
- Delete when only cache exists
- Delete nonexistent model

All tests pass: `uv run pytest src/exo/download/tests/ -v`

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-26 09:14:58 -08:00
Alex Cheema 44453c4c8b Remove change-detection checks from info gatherer monitors (#1283)
## Summary
- When a node times out, its info gets cleared from state. The monitor
functions only sent data when something changed, leaving no mechanism to
re-populate this info after a timeout.
- Removes change-detection checks from `_monitor_misc`,
`_monitor_system_profiler_thunderbolt_data`, `_watch_system_info`, and
`_monitor_thunderbolt_bridge_status` so data is sent periodically
regardless of whether it changed.

## Test plan
- [ ] Verify type checker passes: `uv run basedpyright`
- [ ] Verify linter passes: `uv run ruff check`
- [ ] Verify tests pass: `uv run pytest`
- [ ] Manually test that node info is re-populated after a timeout by
observing cluster behavior

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-26 12:23:22 +00:00
Jake Hillion 1290e8ed9f dashboard: fix prettier-svelte rebuilding on every file change
The prettier-svelte package was rebuilding whenever any file in the
repository changed because dashboardStubSrc referenced inputs.self
directly. Since inputs.self's store path hash is computed from the
entire repository contents, any file modification invalidated the
derivation.

Added dashboardLockfileSrc using lib.cleanSourceWith to filter
inputs.self to only include package.json and package-lock.json from
the dashboard directory. Updated dashboardStubSrc to reference this
filtered source instead of inputs.self directly.

This ensures prettier-svelte only rebuilds when the lockfiles actually
change, significantly improving build caching for unrelated changes.

Test plan:
- Built prettier-svelte with nix build .#prettier-svelte
- Modified src/exo/main.py and rebuilt - same store path (no rebuild)
- Modified dashboard/package.json and rebuilt - different store path (rebuild triggered)
- Ran nix flake check successfully
2026-01-26 12:02:05 +00:00
Evan Quiney d93db3d6bf re enable the evil network script (#1277)
seems like we still need the interfaces to be routable for mdns. at
least we're not dependent on this behaviour anymore.
2026-01-24 13:36:06 +00:00
Alex Cheema ff4a2022f7 Revert state compaction (#1259) (#1275)
## Summary

Reverts the state compaction feature (#1259) to investigate issues with
nodes staying as "unknown" after joining a cluster.

## Test plan

- [ ] Verify nodes properly show up after joining cluster
- [ ] Verify state catchup works correctly without compaction

🤖 Generated with [Claude Code](https://claude.com/claude-code)
2026-01-23 16:29:48 -08:00
rltakashige cee48f6f34 Parse GPT OSS tool calling (#1271)
## Motivation

<img width="3162" height="858" alt="image"
src="https://github.com/user-attachments/assets/e552f373-620a-4522-894b-6f93fd7f1e50"
/>

## Changes

OpenAI Harmony StreamableParser does parsing for us.

## Why It Works

<img width="3230" height="588" alt="image"
src="https://github.com/user-attachments/assets/81f8a43e-c04b-4bd0-9fd0-65e9b5f6ea1d"
/>
2026-01-23 20:43:53 +00:00
Evan Quiney 2b67e84a03 state compaction (#1259)
## motivation

a node joining a long-running cluster would bring down networking. this
attempts to mitigate that issue by compacting the state for catching up
new devices

## changes

introduces a new topic ("state_catchup") over which a full state can be
sent. currently the master sends the worker + api this new state, and
they update only if they have no other events applied - otherwise usual
NACK systems function

## testing

manually tested on two and eight nodes - its an improvement, not a fix

Co-authored-by: rltakashige <rl.takashige@gmail.com>
2026-01-23 20:32:49 +00:00
Alex Cheema 7204fdeb4a Restore Thunderbolt Bridge LaunchDaemon (#1270)
## Motivation

The LaunchDaemon approach for disabling Thunderbolt Bridge was removed
in commit 43f12f5d and replaced with dynamic cycle detection. However,
the LaunchDaemon runs automatically on reboot, ensuring the bridge is
always disabled before it can cause packet storms.

## Changes

- Restore `NetworkSetupHelper.promptAndInstallIfNeeded()` to install a
LaunchDaemon that disables Thunderbolt Bridge on startup
- Show user prompt explaining what will be installed before requesting
admin password
- Remove old cleanup-only logic from `EXOApp.swift`
- Installer removes any existing installation before installing fresh
(handles upgrades)

## Why It Works

The LaunchDaemon runs at boot with `RunAtLoad=true` and periodically
(every ~30 min), destroying bridge0 and disabling Thunderbolt Bridge
before it can cause packet storms. The daemon is only installed
once—`daemonAlreadyInstalled()` checks script content and plist config
match before prompting.

## Test Plan

### Manual Testing
- Run app first time → should see prompt → click Install → enter admin
password → daemon installed
- Run app again → no prompt (already installed)
- Reboot → bridge0 should be destroyed/disabled automatically
- Check daemon: `launchctl list | grep io.exo.networksetup`
- Check files: `/Library/LaunchDaemons/io.exo.networksetup.plist`,
`/Library/Application Support/EXO/disable_bridge.sh`

### Automated Testing
N/A - requires admin privileges and system-level changes

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-23 20:25:37 +00:00
Evan Quiney ec345a4315 fix: deprioritise uncertain ethernet devices (#1267)
we were placing coordinators on uncertain devices (enX+) that are listed
as "USB LAN" - these could be thunderbolt ports breaking RDMA instances
2026-01-23 20:13:28 +00:00
ciaranbor 9967dfa734 Prevent conversation collision (#1266)
## Motivation

When a user switched conversations while a response was still streaming,
the streaming content would be written to the currently selected
conversation instead of the original one. For streamed image generation,
each partial image would be written to the open conversation

## Changes

Added helper methods to track and update the correct conversation during
streaming:
- updateConversationMessage() - Update a message in a specific
conversation by ID
- syncActiveMessagesIfNeeded() - Sync this.messages from target
conversation only if it's active
- conversationExists() - Check if a conversation still exists (handles
mid-stream deletion)
  - persistConversation() - Persist a specific conversation to storage
- addMessageToConversation() - Add a message directly to a specific
conversation


## Why It Works

Capturing the conversation ID at the start of the request ensures we
know which conversation to update

## Test Plan

### Manual Testing

Tested switching conversation during generation across each model type
2026-01-23 19:59:08 +00:00
ciaranbor 23fd37fe4d Add FLUX.1-Krea-dev model (#1269)
## Why It Works

Same implementation as FLUX.1-dev, just different weights
2026-01-23 19:48:24 +00:00
Alex Cheema d229df38f9 Fix placement filter to use subset matching instead of exact match (#1265)
## Motivation

When using the dashboard's instance placement filter (clicking nodes in
the topology), it was filtering to placements that use exactly the
selected nodes. This isn't the expected behavior - users want to see
placements that include all selected nodes, but may also include
additional nodes.

For example, selecting nodes [A, B] should show placements using [A, B],
[A, B, C], [A, B, C, D], etc. - not just [A, B].

## Changes

- Added `required_nodes` parameter to `place_instance()` in
`placement.py`
- Filter cycles early in placement to only those containing all required
nodes (subset matching)
- Simplified `api.py` by removing the subgraph topology filtering and
passing `required_nodes` directly to placement
- Renamed internal `node_ids` variable to `placement_node_ids` to avoid
shadowing the parameter

## Why It Works

By filtering cycles at the placement level using
`required_nodes.issubset(cycle.node_ids)`, we ensure that only cycles
containing all the user-selected nodes are considered. This happens
early in the placement algorithm, so we don't waste time computing
placements that would be filtered out later.

## Test Plan

### Manual Testing
- Select nodes in the dashboard topology view
- Verify that placements shown include all selected nodes (but may
include additional nodes)
- Verify that placements not containing the selected nodes are filtered
out

### Automated Testing
- Existing placement tests pass
- `uv run pytest src/exo/master/tests/ -v` - 37 tests pass

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-23 19:40:31 +00:00
Alex Cheema 8a595fee2f Fix Thunderbolt bridge cycle detection to include 2-node cycles (#1261)
## Motivation

Packet storms occur with Thunderbolt bridge enabled on 2 machines
connected by Thunderbolt, not just 3+ node cycles as previously assumed.
The cycle detection was too conservative and missed this case.

## Changes

- Changed the minimum cycle length from >2 (3+ nodes) to >=2 (2+ nodes)
- Updated the early return threshold from `< 3` to `< 2` enabled nodes
- Updated docstring to reflect the new behavior

## Why It Works

A Thunderbolt bridge loop between just 2 machines can still create
broadcast storms when both have the bridge enabled. The previous
threshold of 3+ was based on an incorrect assumption that 2-node
connections wouldn't cause this problem.

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
- Tested with 2 machines connected via Thunderbolt with bridge enabled
- Confirmed packet storms occur in this configuration
- Verified the fix correctly detects and handles 2-node cycles

### Automated Testing
- Existing topology tests cover cycle detection logic

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-23 19:34:48 +00:00
ciaranbor c8571a17a3 Fix guidance (#1264)
## Motivation

Previously, we only handled user-provided guidance parameter for CFG
models.

## Changes

Just pass the parameter to model setup
2026-01-23 19:13:45 +00:00
Evan Quiney 771a86331b fix instance port assignment (#1268)
we were overassigning the port 52414 to instances because of an error in placement
2026-01-23 18:37:40 +00:00
Jake Hillion 6dbbe7797b downloads: add download and delete buttons to downloads UI
The downloads page showed model download progress but provided no way
for users to trigger downloads or remove completed models from disk.

Added API endpoints (POST /download/start, DELETE /download/{node_id}/{model_id})
that send StartDownload and DeleteDownload commands via the download_command_sender.
Updated the dashboard downloads page with per-model buttons: a download button
for incomplete downloads and a delete button for completed ones.

This allows users to manage downloads directly from the UI without needing
to trigger downloads through other means.

Test plan:
- Deployed on a 3 machine cluster. Did several downloads/deletions - all
  work and the dashboard updates relatively fluently. It takes roughly 5
  seconds to render a 131GB model deletion which isn't too bad.
2026-01-23 18:11:17 +00:00
Jake Hillion 9357503c6f downloads: refactor to run at node level
The Worker previously owned the ShardDownloader directly via dependency
injection, which prevented --no-worker nodes from downloading and made
it impossible for multiple Workers to share a single downloader instance.

Moved download functionality to a new DownloadCoordinator component at
the Node level that communicates via the DOWNLOAD_COMMANDS pub/sub topic.
Workers now send StartDownload commands instead of calling the downloader
directly, and receive progress updates through the event-sourced state.

This decouples downloads from the Worker lifecycle and enables future
features like UI-triggered downloads to specific nodes and multi-worker
download sharing.

Test plan:
- Mostly tested in the next PR that adds explicit downloads/deletions to
  the dashboard.
- Started a model that isn't downloaded - it works.
2026-01-23 18:04:09 +00:00
ciaranbor ba19940828 Fix regenerate for image models (#1263)
## Motivation

The 'regenerate' button was hardcoded to chat completion. Clicking
'regenerate' for image request would result in an error after the model
is loaded

## Changes

Store request type and dispatch to appropriate request upon regeneration

## Why It Works

We make sure to repeat the same request type as was performed originally

## Test Plan

### Manual Testing

Checked 'regenerate' works for chat completion, image generation, image
editing
2026-01-23 16:33:01 +00:00
Jake Hillion f255345a1a dashboard: decouple prettier-svelte from dashboard source
The prettier-svelte formatter depended on the full dashboard build
(dashboardFull), causing the devshell to rebuild whenever any dashboard
source file changed.

Created a deps-only dream2nix derivation (deps.nix) that uses a stub
source containing only package.json, package-lock.json, and minimal
files for vite to succeed. Updated prettier-svelte to use this
derivation instead of dashboardFull.

The stub source is constant unless lockfiles change, so prettier-svelte
and the devshell no longer rebuild when dashboard source files are
modified.

Test plan:
- nix flake check passed
- nix fmt successfully formatted svelte files
2026-01-23 15:16:48 +00:00
ciaranbor a1939c89f2 Enable UI settings for image editing (#1258)
## Motivation

Image editing was missing UI controls for quality, output format, and
advanced parameters that text-to-image generation already supported.

## Changes

- Added quality, output_format, and advanced_params to image edit API
endpoints
- Extended isImageModel check to include image editing models

## Why It Works

The API now accepts and forwards these settings for image edits, and the
UI displays the appropriate controls for image editing models.

## Test Plan

### Manual Testing

Verified parameters can be set in UI and that they progagate through to
model inference
2026-01-23 13:37:25 +00:00
ciaranbor cb9c9ee55c Enable generating multiple images. Optionally stream partial images (#1251)
## Motivation

Support OpenAI API `n` setting

## Changes

- Users can select `n` to generate more than one image with the same
prompt
- each image uses a different seed -> different results
- `stream` and `partial_images` settings can be overwritten in UI
2026-01-23 11:19:58 +00:00
Alex Cheema df240f834d Fix GLM and Kimi tool calling crashes (#1255)
## Motivation

Fixes tool calling crashes with GLM-4.7-Flash and Kimi-K2 models.

Related: #1254

Two distinct issues were causing crashes:
1. **Tool parser crashes** - The upstream GLM47 and Kimi tool parsers
call `.group()` on regex matches without checking for `None`, causing
`AttributeError` when the model outputs malformed tool calls
2. **Chat template crashes** - GLM's chat template expects
`tool_calls[].function.arguments` to be a dict, but OpenAI format
provides it as a JSON string, causing `'str object' has no attribute
'items'`

## Changes

**`src/exo/worker/runner/runner.py`:**
- Add `patch_glm_tokenizer()` - fixed version of mlx_lm's glm47 parser
with None checks
- Fix `patch_kimi_tokenizer()` - add None checks before calling
`.group()` on regex matches
- Add `ValueError` and `AttributeError` to exception handling in
`parse_tool_calls()`

**`src/exo/worker/engines/mlx/utils_mlx.py`:**
- Add `_normalize_tool_calls()` - parses
`tool_calls[].function.arguments` from JSON string to dict for templates
that expect dicts (like GLM-4.7-Flash)

## Why It Works

1. **Parser fixes**: By checking if regex matches are `None` before
calling `.group()`, we can raise a proper `ValueError` instead of
crashing with `AttributeError`

2. **Template fix**: The GLM-4.7-Flash chat template iterates over
arguments with `.items()`:
   ```jinja2
   {% set _args = tc.arguments %}{% for k, v in _args.items() %}
   ```
OpenAI format has `arguments` as a JSON string.
`_normalize_tool_calls()` parses this to a dict before passing to the
template.

## Test Plan

### Manual Testing
- Hardware: Mac with GLM-4.7-Flash-4bit model
- Tested tool calling with GLM model - no longer crashes

### Automated Testing
- Existing tests pass (`uv run pytest`)
- Type checking passes (`uv run basedpyright`)
- Linting passes (`uv run ruff check`)

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-01-23 01:39:59 +00:00
ciaranbor cd125b3b8c Use icon for image editing models (#1252)
## Motivation

Visual indicator for image editing models

## Changes

Add pencil icon to edit models in model list
2026-01-22 22:37:34 +00:00
Alex Cheema b783a21399 dashboard: add placement filter by clicking topology nodes (#1248)
## Motivation

When selecting a model for placement, users often want to see placements
that utilize specific nodes in their cluster. Currently there's no way
to filter the placement previews to focus on configurations that include
particular machines.

## Changes

- **Backend**: Added `node_ids` query parameter to the
`/placement-previews` API endpoint. When provided, the endpoint filters
the topology to only include the specified nodes before generating
placements using the new `Topology.filter_to_nodes()` method.

- **Topology class**: Added `filter_to_nodes(node_ids)` method that
creates a new topology containing only the specified nodes and edges
between them.

- **App store**: Added `previewNodeFilter` state to track selected
nodes, with methods to toggle/clear the filter. Automatically cleans up
filter when nodes are removed from the cluster and re-fetches previews
when topology changes.

- **TopologyGraph component**: Added click handlers to toggle node
filter selection, hover effects to indicate clickable nodes, and visual
styling (yellow highlight for selected, dimmed for filtered-out nodes).

- **Main page**: Added filter indicator in top-right corner of topology
showing active filter count with a clear button.

## Why It Works

The filtering happens at the backend/placement generation level rather
than just filtering the results. This ensures we see all valid placement
combinations for the selected nodes, not just a subset that happened to
be generated for the full topology.

The visual feedback uses the same rendering approach as the existing
highlight system - state is tracked in Svelte and applied during render,
so it persists across data updates without flickering.

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
- Click a node in topology → should show yellow highlight and filter
indicator
- Click another node → indicator shows "2 nodes", previews update to
show only placements using both
- Hover over nodes → subtle yellow highlight indicates they're clickable
- Click X on filter indicator → clears filter, shows all placements
again
- Disconnect a node while it's in filter → filter auto-removes that node

### Automated Testing
- Existing tests cover the Topology class; the new `filter_to_nodes`
method follows the same patterns

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-22 22:12:57 +00:00
Alex Cheema 43f12f5d08 Replace LaunchDaemon with dynamic Thunderbolt Bridge loop detection (#1222)
## Motivation

The previous approach installed a LaunchDaemon plist that ran
periodically to disable Thunderbolt Bridge. This required full admin
privileges upfront and ran regardless of whether a problematic loop
existed.

This change replaces that with dynamic detection - only prompting the
user when an actual TB bridge loop with 3+ machines is detected, and
using fine-grained SCPreferences authorization instead of full admin.

## Changes

**Backend (Python):**
- Added `ThunderboltBridgeStatus` model to track bridge enabled/exists
state per node
- Added `node_thunderbolt_bridge` and `thunderbolt_bridge_cycles` fields
to State
- Added `get_thunderbolt_bridge_cycles()` method to Topology class
- **Robust TB bridge detection:**
- Finds bridge network services from `-listnetworkserviceorder` (not
`-listallhardwareports` which can miss bridges)
- Checks each bridge's member interfaces via `ifconfig` to verify it
contains Thunderbolt interfaces
- Handles varying service names (e.g., "TB Bridge", "Thunderbolt
Bridge", "Bridge (bridge0)")
  - Includes `service_name` in status for correct disable commands
  - Added warning logs for all error cases in detection
- Updated `apply.py` to handle the new event type and recompute cycles
on node timeout

**Swift App:**
- New `ThunderboltBridgeService` that monitors for cycles from cluster
state
- Shows NSAlert when a cycle with >2 machines is detected
- Uses `SCPreferencesCreateWithAuthorization` with
`system.services.systemconfiguration.network` right for targeted
permissions
- **Auto-cleanup of legacy LaunchDaemon:** On app startup, checks for
and removes old plist/scripts (non-fatal if user cancels)
- **Periodic local network checking:** Re-checks every 10s so the
warning disappears when user grants permission
- **Fixed ClusterState model:** Updated to decode new granular state
fields (`nodeIdentities`, `nodeMemory`, `nodeSystem`,
`nodeThunderboltBridge`) with computed `nodeProfiles` property for
backwards compatibility
- **Fixed Topology model:** Updated to match actual JSON structure where
`nodes` is an array of strings (not objects) and `connections` is a
nested map (not flat array)
- Cleaned up `NetworkSetupHelper` by removing daemon installation code
(now only handles uninstall)

**Dashboard:**
- Added yellow warning badge on topology when TB bridge cycle detected
- On hover: highlights affected nodes in yellow on the topology graph
- Shows which machines are in the cycle with friendly names
- Provides copy-paste terminal command with the correct service name:
  ```
  sudo networksetup -setnetworkserviceenabled "<service-name>" off
  ```
- Warning appears in all topology views (full, welcome, and minimized
chat sidebar)
- **Debug mode:** Shows "TB:ON" or "TB:OFF" status next to each node in
the topology

## Why It Works

- Cycle detection happens on the backend where we have full topology
information
- Only cycles with 3+ machines are flagged (2-node connections are fine)
- TB bridge detection is robust:
- Uses `-listnetworkserviceorder` to find bridges (works on all machines
tested)
- Verifies bridge membership via `ifconfig` to confirm Thunderbolt
interfaces
  - Handles different service names across machines
- The Swift app reacts to detected cycles and prompts the user once per
cycle
- The dashboard provides visual feedback and actionable instructions
- `SCPreferencesCreateWithAuthorization` provides the minimal
permissions needed to modify network service state
- Legacy LaunchDaemon is automatically cleaned up on first launch with
this version

## Test Plan

### Manual Testing
Here EXO detected a TB bridge cycle:

#### Dashboard:
<img width="1363" height="884" alt="Screenshot 2026-01-21 at 10 07
30 PM"
src="https://github.com/user-attachments/assets/7da9c621-0c91-42c4-898e-4952188a1f61"
/>

#### Hovering the warning:
<img width="359" height="279" alt="Screenshot 2026-01-21 at 16 30 57"
src="https://github.com/user-attachments/assets/05501dcf-3d4a-4704-9f38-257748c05a53"
/>

#### macOS app warning popup:
<img width="270" height="410" alt="Screenshot 2026-01-21 at 16 29 08"
src="https://github.com/user-attachments/assets/45714427-08c3-4fb4-9e61-144925c51adf"
/>

### Which then asks for the user's password:
<img width="263" height="372" alt="Screenshot 2026-01-21 at 16 29 28"
src="https://github.com/user-attachments/assets/7502e591-596d-4128-8cf5-6a12674e27bc"
/>

Which when entered, successfully disables bridge and no longer shows the
warning on dashboard.

#### When it fails it shows the error message:
<img width="263" height="234" alt="Screenshot 2026-01-21 at 14 45 38"
src="https://github.com/user-attachments/assets/2d10b3d5-69d7-46ea-b631-d52d8651ab41"
/>

### Automated Testing
- Type checker: 0 errors (`uv run basedpyright`)
- Linter: All checks passed (`uv run ruff check`)
- Tests: 118 passed (`uv run pytest`)
- Dashboard: Builds successfully (`npm run build`)

---------

Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-22 21:53:05 +00:00
ciaranbor 8027d7933f Ciaran/hf token (#1250)
## Motivation

black-forest-labs models require hf auth and signup to download. We
don't handle this gracefully.
https://github.com/exo-explore/exo/issues/1242

## Changes

- Handle auth errors
- Surface error to UI and suggest resolution
- Support using HF_TOKEN env variable for auto
- Hide image functionality behind `EXO_ENABLE_IMAGE_MODELS=true` for now

## Why It Works

Users are presented with actionable feedback when issue occurs

## Test Plan

### Manual Testing

Confirmed loading black-forest-labs model in UI presents the issue in
the UI.
Confirmed both `hf auto login` and setting `HF_TOKEN` resolve the issue
2026-01-22 20:39:53 +00:00
Alex Cheema 842beefac0 feat: add continuous batching for distributed inference
Implements continuous batching using mlx_lm's BatchGenerator for efficient
multi-request handling in distributed mode.

Key changes:
- Add BatchGenerationEngine that wraps mlx_lm's BatchGenerator for continuous
  batching with prefill batching (up to 8 requests) and decode batching
- Add TimeBudget pattern for controlling generation loop timing with periodic
  distributed sync
- Add distributed_sync utilities for broadcasting objects across ranks using
  mx.distributed.all_sum()
- Stream tokens immediately as generated for smooth streaming (not in batches)
- Fix distributed correctness: deferred shutdown handling, sync_completions
  always syncs in distributed mode to prevent deadlocks

Performance results on Kimi K2 Thinking (658GB) with Tensor RDMA:
- Batch 1:  10.7 tok/s (baseline)
- Batch 4:  34.6 tok/s (3.2x speedup)
- Batch 16: 41.8 tok/s (3.9x speedup)

Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-22 12:27:15 +00:00
Evan ac6efa747b add kimi tool parseing
this patches the kimi tokenizer to add tool calling - it can be reverted
once upstream support is added for kimi-k2
2026-01-22 11:49:25 +00:00
Evan 2e3c33db6d implement mlx-lm tool calling
splits up the runners generation chunks into tool calls, tokens and
errors, and writes tool call chunks when the upstream parser detects
them.
2026-01-22 11:49:25 +00:00
rltakashige fc8e6ad06b Reduce download log spam (#1249)
## Motivation

<!-- Why is this change needed? What problem does it solve? -->
<!-- If it fixes an open issue, please link to the issue here -->

## Changes

<!-- Describe what you changed in detail -->

## Why It Works

<!-- Explain why your approach solves the problem -->

## Test Plan

### Manual Testing
<!-- Hardware: (e.g., MacBook Pro M1 Max 32GB, Mac Mini M2 16GB,
connected via Thunderbolt 4) -->
<!-- What you did: -->
<!-- - -->

### Automated Testing
<!-- Describe changes to automated tests, or how existing tests cover
this change -->
<!-- - -->
2026-01-22 11:28:36 +00:00
249 changed files with 23927 additions and 4554 deletions
-12
View File
@@ -1,12 +0,0 @@
name: Type Check
description: "Run type checker"
runs:
using: "composite"
steps:
- name: Run type checker
run: |
nix --extra-experimental-features nix-command --extra-experimental-features flakes develop -c just sync
nix --extra-experimental-features nix-command --extra-experimental-features flakes develop -c just check
shell: bash
+7 -1
View File
@@ -396,7 +396,7 @@ jobs:
path: output/EXO-${{ env.RELEASE_VERSION }}.dmg
- name: Upload to S3
if: env.SPARKLE_S3_BUCKET != '' && github.ref_type == 'tag'
if: env.SPARKLE_S3_BUCKET != ''
env:
AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
@@ -412,6 +412,12 @@ jobs:
PREFIX="${PREFIX}/"
fi
DMG_NAME="EXO-${RELEASE_VERSION}.dmg"
if [[ "${{ github.ref_type }}" != "tag" ]]; then
aws s3 cp "$DMG_NAME" "s3://${SPARKLE_S3_BUCKET}/${PREFIX}EXO-${GITHUB_SHA}.dmg"
exit 0
fi
aws s3 cp "$DMG_NAME" "s3://${SPARKLE_S3_BUCKET}/${PREFIX}${DMG_NAME}"
if [[ "$IS_ALPHA" != "true" ]]; then
aws s3 cp "$DMG_NAME" "s3://${SPARKLE_S3_BUCKET}/${PREFIX}EXO-latest.dmg"
+76 -65
View File
@@ -26,73 +26,14 @@ jobs:
name: exo
authToken: "${{ secrets.CACHIX_AUTH_TOKEN }}"
- name: Configure git user
run: |
git config --local user.email "github-actions@users.noreply.github.com"
git config --local user.name "github-actions bot"
shell: bash
- name: Load nix develop environment
run: nix run github:nicknovitski/nix-develop/v1
- name: Pull LFS files
run: |
echo "Pulling Git LFS files..."
git lfs pull
shell: bash
- name: Sync dependencies
run: uv sync --all-packages
- name: Setup Nix Environment
run: |
echo "Checking for nix installation..."
# Check if nix binary exists directly
if [ -f /nix/var/nix/profiles/default/bin/nix ]; then
echo "Found nix binary at /nix/var/nix/profiles/default/bin/nix"
export PATH="/nix/var/nix/profiles/default/bin:$PATH"
echo "PATH=$PATH" >> $GITHUB_ENV
nix --version
elif [ -f /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh ]; then
echo "Found nix profile script, sourcing..."
source /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh
nix --version
elif command -v nix >/dev/null 2>&1; then
echo "Nix already in PATH"
nix --version
else
echo "Nix not found. Debugging info:"
echo "Contents of /nix/var/nix/profiles/default/:"
ls -la /nix/var/nix/profiles/default/ 2>/dev/null || echo "Directory not found"
echo "Contents of /nix/var/nix/profiles/default/bin/:"
ls -la /nix/var/nix/profiles/default/bin/ 2>/dev/null || echo "Directory not found"
exit 1
fi
shell: bash
- name: Configure basedpyright include for local MLX
run: |
RUNNER_LABELS='${{ toJSON(runner.labels) }}'
if echo "$RUNNER_LABELS" | grep -q "local_mlx"; then
if [ -d "/Users/Shared/mlx" ]; then
echo "Updating [tool.basedpyright].include to use /Users/Shared/mlx"
awk '
BEGIN { in=0 }
/^\[tool\.basedpyright\]/ { in=1; print; next }
in && /^\[/ { in=0 } # next section
in && /^[ \t]*include[ \t]*=/ {
print "include = [\"/Users/Shared/mlx\"]"
next
}
{ print }
' pyproject.toml > pyproject.toml.tmp && mv pyproject.toml.tmp pyproject.toml
echo "New [tool.basedpyright] section:"
sed -n '/^\[tool\.basedpyright\]/,/^\[/p' pyproject.toml | sed '$d' || true
else
echo "local_mlx tag present but /Users/Shared/mlx not found; leaving pyproject unchanged."
fi
else
echo "Runner does not have 'local_mlx' tag; leaving pyproject unchanged."
fi
shell: bash
- uses: ./.github/actions/typecheck
- name: Run type checker
run: uv run basedpyright --project pyproject.toml
nix:
name: Build and check (${{ matrix.system }})
@@ -123,6 +64,63 @@ jobs:
name: exo
authToken: "${{ secrets.CACHIX_AUTH_TOKEN }}"
- name: Build Metal packages (macOS only)
if: runner.os == 'macOS'
run: |
# Try to build metal-toolchain first (may succeed via cachix cache hit)
if nix build .#metal-toolchain 2>/dev/null; then
echo "metal-toolchain built successfully (likely cache hit)"
else
echo "metal-toolchain build failed, extracting from Xcode..."
NAR_HASH="sha256-ayR5mXN4sZAddwKEG2OszGRF93k9ZFc7H0yi2xbylQw="
NAR_NAME="metal-toolchain-17C48.nar"
# Use RUNNER_TEMP to avoid /tmp symlink issues on macOS
WORK_DIR="${RUNNER_TEMP}/metal-work"
mkdir -p "$WORK_DIR"
# Download the Metal toolchain component
xcodebuild -downloadComponent MetalToolchain
# Find and mount the DMG
DMG_PATH=$(find /System/Library/AssetsV2/com_apple_MobileAsset_MetalToolchain -name '*.dmg' 2>/dev/null | head -1)
if [ -z "$DMG_PATH" ]; then
echo "Error: Could not find Metal toolchain DMG"
exit 1
fi
echo "Found DMG at: $DMG_PATH"
hdiutil attach "$DMG_PATH" -mountpoint "${WORK_DIR}/metal-dmg"
# Copy the toolchain
cp -R "${WORK_DIR}/metal-dmg/Metal.xctoolchain" "${WORK_DIR}/metal-export"
hdiutil detach "${WORK_DIR}/metal-dmg"
# Create NAR and add to store
nix nar pack "${WORK_DIR}/metal-export" > "${WORK_DIR}/${NAR_NAME}"
STORE_PATH=$(nix store add --mode flat "${WORK_DIR}/${NAR_NAME}")
echo "Added NAR to store: $STORE_PATH"
# Verify the hash matches
ACTUAL_HASH=$(nix hash file "${WORK_DIR}/${NAR_NAME}")
if [ "$ACTUAL_HASH" != "$NAR_HASH" ]; then
echo "Warning: NAR hash mismatch!"
echo "Expected: $NAR_HASH"
echo "Actual: $ACTUAL_HASH"
echo "The metal-toolchain.nix may need updating"
fi
# Clean up
rm -rf "$WORK_DIR"
# Retry the build now that NAR is in store
nix build .#metal-toolchain
fi
# Build mlx (depends on metal-toolchain)
nix build .#mlx
- name: Build all Nix outputs
run: |
nix flake show --json | jq -r '
@@ -134,3 +132,16 @@ jobs:
- name: Run nix flake check
run: nix flake check
- name: Run pytest (macOS only)
if: runner.os == 'macOS'
run: |
# Build the test environment (requires relaxed sandbox for uv2nix on macOS)
TEST_ENV=$(nix build '.#exo-test-env' --option sandbox relaxed --print-out-paths)
# Run pytest outside sandbox (needs GPU access for MLX)
export HOME="$RUNNER_TEMP"
export EXO_TESTS=1
export EXO_DASHBOARD_DIR="$PWD/dashboard/"
export EXO_RESOURCES_DIR="$PWD/resources"
$TEST_ENV/bin/python -m pytest src -m "not slow" --import-mode=importlib
+10
View File
@@ -28,3 +28,13 @@ target/
dashboard/build/
dashboard/node_modules/
dashboard/.svelte-kit/
# host config snapshots
hosts_*.json
.swp
# bench files
bench/**/*.json
# tmp
tmp/models
@@ -0,0 +1,7 @@
"""
This type stub file was generated by pyright.
"""
from mflux.models.flux.variants.kontext.flux_kontext import Flux1Kontext
__all__ = ["Flux1Kontext"]
@@ -0,0 +1,49 @@
"""
This type stub file was generated by pyright.
"""
from pathlib import Path
from typing import Any
from mlx import nn
from mflux.models.common.config.model_config import ModelConfig
from mflux.models.flux.model.flux_text_encoder.clip_encoder.clip_encoder import (
CLIPEncoder,
)
from mflux.models.flux.model.flux_text_encoder.t5_encoder.t5_encoder import T5Encoder
from mflux.models.flux.model.flux_transformer.transformer import Transformer
from mflux.models.flux.model.flux_vae.vae import VAE
from mflux.utils.generated_image import GeneratedImage
class Flux1Kontext(nn.Module):
vae: VAE
transformer: Transformer
t5_text_encoder: T5Encoder
clip_text_encoder: CLIPEncoder
bits: int | None
lora_paths: list[str] | None
lora_scales: list[float] | None
prompt_cache: dict[str, Any]
tokenizers: dict[str, Any]
def __init__(
self,
quantize: int | None = ...,
model_path: str | None = ...,
lora_paths: list[str] | None = ...,
lora_scales: list[float] | None = ...,
model_config: ModelConfig = ...,
) -> None: ...
def generate_image(
self,
seed: int,
prompt: str,
num_inference_steps: int = ...,
height: int = ...,
width: int = ...,
guidance: float = ...,
image_path: Path | str | None = ...,
image_strength: float | None = ...,
scheduler: str = ...,
) -> GeneratedImage: ...
@@ -0,0 +1,16 @@
"""
This type stub file was generated by pyright.
"""
import mlx.core as mx
from mflux.models.flux.model.flux_vae.vae import VAE
class KontextUtil:
@staticmethod
def create_image_conditioning_latents(
vae: VAE,
height: int,
width: int,
image_path: str,
) -> tuple[mx.array, mx.array]: ...
+3 -3
View File
@@ -1139,7 +1139,7 @@ class array:
) -> array:
"""See :func:`flatten`."""
def reshape(self, *shape, stream: Stream | Device | None = ...) -> array:
def reshape(self, *shape: int, stream: Stream | Device | None = ...) -> array:
"""
Equivalent to :func:`reshape` but the shape can be passed either as a
:obj:`tuple` or as separate arguments.
@@ -1222,7 +1222,7 @@ class array:
) -> array:
"""See :func:`swapaxes`."""
def transpose(self, *axes, stream: Stream | Device | None = ...) -> array:
def transpose(self, *axes: int, stream: Stream | Device | None = ...) -> array:
"""
Equivalent to :func:`transpose` but the axes can be passed either as
a tuple or as separate arguments.
@@ -2366,7 +2366,7 @@ class custom_function:
def default_device() -> Device:
"""Get the default device."""
def default_stream(device: Device) -> Stream:
def default_stream(device: Device | DeviceType) -> Stream:
"""Get the device's default stream."""
def degrees(a: array, /, *, stream: Stream | Device | None = ...) -> array:
@@ -30,6 +30,9 @@ class Conv1d(Module):
bias (bool, optional): If ``True`` add a learnable bias to the output.
Default: ``True``
"""
weight: mx.array
groups: int
def __init__(
self,
in_channels: int,
+8 -9
View File
@@ -276,24 +276,23 @@ class BatchGenerator:
logprobs: mx.array
finish_reason: Optional[str]
unprocessed_prompts: List[Any]
def __init__(
self,
model,
model: nn.Module,
max_tokens: int = ...,
stop_tokens: Optional[set] = ...,
stop_tokens: Optional[set[int]] = ...,
sampler: Optional[Callable[[mx.array], mx.array]] = ...,
completion_batch_size: int = ...,
prefill_batch_size: int = ...,
prefill_step_size: int = ...,
) -> None: ...
def insert(
self, prompts, max_tokens: Union[List[int], int, None] = ...
): # -> list[Any]:
...
def stats(self): # -> BatchStats:
...
def next(self): # -> list[Any]:
...
self, prompts: List[List[int]], max_tokens: Union[List[int], int, None] = ...
) -> List[int]: ...
def stats(self) -> BatchStats: ...
def next(self) -> List[Response]: ...
def batch_generate(
model,
+5 -1
View File
@@ -11,7 +11,10 @@ import mlx.core as mx
class Cache(Protocol):
keys: mx.array
values: mx.array
def update_and_fetch(self, keys: mx.array, values: mx.array) -> None: ...
offset: int
def update_and_fetch(
self, keys: mx.array, values: mx.array
) -> tuple[mx.array, mx.array]: ...
@property
def state(self) -> tuple[mx.array, mx.array]: ...
@state.setter
@@ -87,6 +90,7 @@ def create_attention_mask(
class _BaseCache(Cache):
keys: mx.array
values: mx.array
offset: int
@property
def state(self) -> tuple[mx.array, mx.array]: ...
@state.setter
+5 -1
View File
@@ -5,6 +5,7 @@ from typing import Any, Dict, Optional
import mlx.core as mx
import mlx.nn as nn
from mlx_lm.models.mla import MultiLinear
from .base import BaseModelArgs
from .switch_layers import SwitchGLU
@@ -60,7 +61,10 @@ class DeepseekV3Attention(nn.Module):
q_b_proj: nn.Linear
kv_a_proj_with_mqa: nn.Linear
kv_a_layernorm: nn.RMSNorm
kv_b_proj: nn.Linear
# kv_b_proj: nn.Linear
embed_q: MultiLinear
unembed_out: MultiLinear
o_proj: nn.Linear
rope: Any
+153
View File
@@ -0,0 +1,153 @@
from dataclasses import dataclass
from typing import Any, Dict, Optional
import mlx.core as mx
import mlx.nn as nn
from .base import BaseModelArgs
from .switch_layers import SwitchGLU
@dataclass
class ModelArgs(BaseModelArgs):
model_type: str
vocab_size: int
hidden_size: int
intermediate_size: int
max_position_embeddings: int
moe_intermediate_size: int
norm_topk_prob: bool
num_attention_heads: int
n_group: int
head_dim: int
topk_group: int
n_shared_experts: int
n_routed_experts: int
routed_scaling_factor: float
num_experts_per_tok: int
first_k_dense_replace: int
num_hidden_layers: int
num_key_value_heads: int
rms_norm_eps: float
rope_theta: float
rope_scaling: Optional[Dict[str, Any]]
use_qk_norm: bool
tie_word_embeddings: bool
attention_bias: bool
partial_rotary_factor: float
scoring_func: str
topk_method: str
class Attention(nn.Module):
n_heads: int
n_kv_heads: int
scale: float
q_proj: nn.Linear
k_proj: nn.Linear
v_proj: nn.Linear
o_proj: nn.Linear
use_qk_norm: bool
q_norm: nn.RMSNorm
k_norm: nn.RMSNorm
rope: nn.RoPE
def __init__(self, args: ModelArgs) -> None: ...
def __call__(
self,
x: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class MLP(nn.Module):
config: ModelArgs
hidden_size: int
intermediate_size: int
gate_proj: nn.Linear
up_proj: nn.Linear
down_proj: nn.Linear
def __init__(
self,
config: ModelArgs,
hidden_size: Optional[int] = None,
intermediate_size: Optional[int] = None,
) -> None: ...
def __call__(self, x: mx.array) -> mx.array: ...
class MoEGate(nn.Module):
config: ModelArgs
top_k: int
norm_topk_prob: bool
n_routed_experts: int
routed_scaling_factor: float
n_group: int
topk_group: int
weight: mx.array
e_score_correction_bias: mx.array
def __init__(self, config: ModelArgs) -> None: ...
def __call__(self, x: mx.array) -> tuple[mx.array, mx.array]: ...
class MoE(nn.Module):
config: ModelArgs
num_experts_per_tok: int
switch_mlp: SwitchGLU
gate: MoEGate
shared_experts: MLP
sharding_group: Optional[mx.distributed.Group]
def __init__(self, config: ModelArgs) -> None: ...
def __call__(self, x: mx.array) -> mx.array: ...
class DecoderLayer(nn.Module):
self_attn: Attention
mlp: MLP | MoE
input_layernorm: nn.RMSNorm
post_attention_layernorm: nn.RMSNorm
def __init__(self, config: ModelArgs, layer_idx: int) -> None: ...
def __call__(
self,
x: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class LanguageModel(nn.Module):
vocab_size: int
embed_tokens: nn.Embedding
layers: list[DecoderLayer]
norm: nn.RMSNorm
pipeline_rank: int
pipeline_size: int
start_idx: int
end_idx: Optional[int]
num_layers: int
def __init__(self, config: ModelArgs) -> None: ...
def __call__(
self,
x: mx.array,
cache: Optional[Any] = None,
) -> mx.array: ...
@property
def pipeline_layers(self) -> list[DecoderLayer]: ...
class Model(nn.Module):
args: ModelArgs
model_type: str
model: LanguageModel
lm_head: nn.Linear
def __init__(self, config: ModelArgs) -> None: ...
def __call__(
self,
inputs: mx.array,
cache: Optional[Any] = None,
) -> mx.array: ...
def sanitize(self, weights: dict[str, Any]) -> dict[str, Any]: ...
def shard(self, group: Optional[mx.distributed.Group] = None) -> None: ...
@property
def layers(self) -> list[DecoderLayer]: ...
@property
def cast_predicate(self) -> Any: ...
+114
View File
@@ -0,0 +1,114 @@
"""Type stubs for mlx_lm.models.qwen3_next"""
from typing import Any, Optional
import mlx.core as mx
import mlx.nn as nn
from .switch_layers import SwitchGLU
class Qwen3NextMLP(nn.Module):
gate_proj: nn.Linear
down_proj: nn.Linear
up_proj: nn.Linear
def __init__(self, dim: int, hidden_dim: int) -> None: ...
def __call__(self, x: mx.array) -> mx.array: ...
class Qwen3NextGatedDeltaNet(nn.Module):
hidden_size: int
num_v_heads: int
num_k_heads: int
head_k_dim: int
head_v_dim: int
key_dim: int
value_dim: int
conv_kernel_size: int
conv_dim: int
conv1d: nn.Conv1d
in_proj_qkvz: nn.Linear
in_proj_ba: nn.Linear
dt_bias: mx.array
A_log: mx.array
out_proj: nn.Linear
def __init__(self, config: Any) -> None: ...
def __call__(
self,
inputs: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class Qwen3NextAttention(nn.Module):
num_attention_heads: int
num_key_value_heads: int
head_dim: int
scale: float
q_proj: nn.Linear
k_proj: nn.Linear
v_proj: nn.Linear
o_proj: nn.Linear
def __init__(self, args: Any) -> None: ...
def __call__(
self,
x: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class Qwen3NextSparseMoeBlock(nn.Module):
norm_topk_prob: bool
num_experts: int
top_k: int
gate: nn.Linear
switch_mlp: SwitchGLU
shared_expert: Qwen3NextMLP
shared_expert_gate: nn.Linear
def __init__(self, args: Any) -> None: ...
def __call__(self, x: mx.array) -> mx.array: ...
class Qwen3NextDecoderLayer(nn.Module):
is_linear: bool
linear_attn: Qwen3NextGatedDeltaNet
self_attn: Qwen3NextAttention
input_layernorm: nn.RMSNorm
post_attention_layernorm: nn.RMSNorm
mlp: Qwen3NextMLP | Qwen3NextSparseMoeBlock
def __init__(self, args: Any, layer_idx: int) -> None: ...
def __call__(
self,
x: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class Qwen3NextModel(nn.Module):
embed_tokens: nn.Embedding
layers: list[Qwen3NextDecoderLayer]
norm: nn.RMSNorm
def __init__(self, args: Any) -> None: ...
def __call__(
self,
inputs: mx.array,
cache: Optional[Any] = None,
) -> mx.array: ...
class Model(nn.Module):
model_type: str
model: Qwen3NextModel
lm_head: nn.Linear
def __init__(self, args: Any) -> None: ...
def __call__(
self,
inputs: mx.array,
cache: Optional[Any] = None,
) -> mx.array: ...
def sanitize(self, weights: dict[str, Any]) -> dict[str, Any]: ...
@property
def layers(self) -> list[Qwen3NextDecoderLayer]: ...
+151
View File
@@ -0,0 +1,151 @@
from dataclasses import dataclass
from typing import Any, Dict, List, Optional
import mlx.core as mx
import mlx.nn as nn
from .base import BaseModelArgs
from .switch_layers import SwitchGLU
@dataclass
class ModelArgs(BaseModelArgs):
model_type: str
hidden_size: int
num_hidden_layers: int
vocab_size: int
num_attention_heads: int
num_attention_groups: int
head_dim: int
intermediate_size: int
rms_norm_eps: float
rope_theta: float
rope_scaling: Optional[Dict[str, Any]]
max_position_embeddings: int
sliding_window: int
layer_types: Optional[List[str]]
yarn_only_types: Optional[List[str]]
partial_rotary_factors: Optional[List[float]]
attention_other_setting: Optional[Dict[str, Any]]
use_head_wise_attn_gate: bool
moe_num_experts: int
moe_top_k: int
moe_intermediate_size: int
share_expert_dim: int
moe_layers_enum: Optional[str]
moe_router_scaling_factor: float
norm_expert_weight: bool
swiglu_limits: Optional[List[float]]
swiglu_limits_shared: Optional[List[float]]
tie_word_embeddings: bool
class Step3p5MLP(nn.Module):
hidden_size: int
intermediate_size: int
gate_proj: nn.Linear
up_proj: nn.Linear
down_proj: nn.Linear
limit: Optional[float]
def __init__(
self, args: ModelArgs, intermediate_size: int, swiglu_limit: float = 0
) -> None: ...
def __call__(self, x: mx.array) -> mx.array: ...
class Step3p5MoEGate(nn.Module):
top_k: int
n_routed_experts: int
routed_scaling_factor: float
norm_topk_prob: bool
gate: nn.Linear
router_bias: mx.array
def __init__(self, args: ModelArgs) -> None: ...
def __call__(self, x: mx.array) -> tuple[mx.array, mx.array]: ...
class Step3p5MoE(nn.Module):
gate: Step3p5MoEGate
switch_mlp: SwitchGLU
share_expert: Step3p5MLP
sharding_group: Optional[mx.distributed.Group]
def __init__(self, args: ModelArgs, layer_idx: int) -> None: ...
def __call__(self, x: mx.array) -> mx.array: ...
class Step3p5Attention(nn.Module):
is_sliding: bool
num_heads: int
num_kv_heads: int
head_dim: int
scale: float
q_proj: nn.Linear
k_proj: nn.Linear
v_proj: nn.Linear
o_proj: nn.Linear
q_norm: nn.Module
k_norm: nn.Module
use_head_wise_attn_gate: bool
g_proj: nn.Linear
rope: nn.Module
def __init__(self, args: ModelArgs, layer_idx: int) -> None: ...
def __call__(
self,
x: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class Step3p5DecoderLayer(nn.Module):
self_attn: Step3p5Attention
is_sliding: bool
is_moe_layer: bool
mlp: Step3p5MLP | Step3p5MoE
input_layernorm: nn.Module
post_attention_layernorm: nn.Module
def __init__(self, args: ModelArgs, layer_idx: int) -> None: ...
def __call__(
self,
x: mx.array,
mask: Optional[mx.array] = None,
cache: Optional[Any] = None,
) -> mx.array: ...
class Step3p5Model(nn.Module):
args: ModelArgs
vocab_size: int
num_layers: int
embed_tokens: nn.Embedding
layers: list[Step3p5DecoderLayer]
norm: nn.Module
_swa_idx: Optional[int]
_full_idx: Optional[int]
def __init__(self, args: ModelArgs) -> None: ...
def __call__(
self,
x: mx.array,
cache: Optional[List[Any]] = None,
) -> mx.array: ...
class Model(nn.Module):
args: ModelArgs
model_type: str
model: Step3p5Model
lm_head: nn.Linear
def __init__(self, args: ModelArgs) -> None: ...
def __call__(
self,
inputs: mx.array,
cache: Optional[List[Any]] = None,
) -> mx.array: ...
def sanitize(self, weights: dict[str, Any]) -> dict[str, Any]: ...
def shard(self, group: Optional[mx.distributed.Group] = None) -> None: ...
@property
def layers(self) -> list[Step3p5DecoderLayer]: ...
def make_cache(self) -> list[Any]: ...
@property
def cast_predicate(self) -> Any: ...
@property
def quant_predicate(self) -> Any: ...
+10 -5
View File
@@ -39,11 +39,11 @@ class StreamingDetokenizer:
"""
__slots__ = ...
def reset(self): ...
def add_token(self, token): ...
def finalize(self): ...
def reset(self) -> None: ...
def add_token(self, token: int) -> None: ...
def finalize(self) -> None: ...
@property
def last_segment(self):
def last_segment(self) -> str:
"""Return the last segment of readable text since last time this property was accessed."""
class NaiveStreamingDetokenizer(StreamingDetokenizer):
@@ -108,16 +108,21 @@ class TokenizerWrapper:
_tokenizer: PreTrainedTokenizerFast
eos_token_id: int | None
eos_token: str | None
eos_token_ids: list[int] | set[int] | None
bos_token_id: int | None
bos_token: str | None
vocab_size: int
all_special_tokens: list[str]
think_start: str | None
think_end: str | None
think_start_id: int | None
think_end_id: int | None
def __init__(
self,
tokenizer: Any,
detokenizer_class: Any = ...,
eos_token_ids: list[int] | None = ...,
eos_token_ids: list[int] | set[int] | None = ...,
chat_template: Any = ...,
tool_parser: Any = ...,
tool_call_start: str | None = ...,
+114
View File
@@ -116,6 +116,120 @@ From .cursorrules:
- Catch exceptions only where you can handle them meaningfully
- Use `@final` and immutability wherever applicable
## Model Storage
Downloaded models are stored in `~/.exo/models/` (not the standard HuggingFace cache location).
## Creating Model Instances via API
When testing with the API, you must first create a model instance before sending chat completions:
```bash
# 1. Get instance previews for a model
curl "http://localhost:52415/instance/previews?model_id=llama-3.2-1b"
# 2. Create an instance from the first valid preview
INSTANCE=$(curl -s "http://localhost:52415/instance/previews?model_id=llama-3.2-1b" | jq -c '.previews[] | select(.error == null) | .instance' | head -n1)
curl -X POST http://localhost:52415/instance -H 'Content-Type: application/json' -d "{\"instance\": $INSTANCE}"
# 3. Wait for the runner to become ready (check logs for "runner ready")
# 4. Send chat completions using the full model ID
curl -X POST http://localhost:52415/v1/chat/completions \
-H "Content-Type: application/json" \
-d '{"model": "mlx-community/Llama-3.2-1B-Instruct-4bit", "messages": [{"role": "user", "content": "Hello"}], "max_tokens": 50}'
```
## Logs
Exo logs are stored in `~/.exo/exo.log`. This is useful for debugging runner crashes and distributed issues.
## Testing
Tests use pytest-asyncio with `asyncio_mode = "auto"`. Tests are in `tests/` subdirectories alongside the code they test. The `EXO_TESTS=1` env var is set during tests.
### Distributed Testing
When running distributed tests across multiple machines, use `EXO_LIBP2P_NAMESPACE` to isolate your test cluster from other exo instances on the same network:
```bash
# On each machine in the test cluster, use the same unique namespace
EXO_LIBP2P_NAMESPACE=my-test-cluster uv run exo
```
This prevents your test cluster from discovering and interfering with production or other developers' exo clusters.
## Dashboard UI Testing & Screenshots
### Building and Running the Dashboard
```bash
# Build the dashboard (must be done before running exo)
cd dashboard && npm install && npm run build && cd ..
# Start exo (serves the dashboard at http://localhost:52415)
uv run exo &
sleep 8 # Wait for server to start
```
### Taking Headless Screenshots with Playwright
Use Playwright with headless Chromium for programmatic screenshots — no manual browser interaction needed.
**Setup (one-time):**
```bash
npx --yes playwright install chromium
cd /tmp && npm init -y && npm install playwright
```
**Taking screenshots:**
```javascript
// Run from /tmp where playwright is installed: cd /tmp && node -e "..."
const { chromium } = require('playwright');
(async () => {
const browser = await chromium.launch({ headless: true });
const page = await browser.newPage({ viewport: { width: 1280, height: 800 } });
await page.goto('http://localhost:52415', { waitUntil: 'networkidle' });
await page.waitForTimeout(2000);
// Inject test data into localStorage if needed (e.g., recent models)
await page.evaluate(() => {
localStorage.setItem('exo-recent-models', JSON.stringify([
{ modelId: 'mlx-community/Qwen3-30B-A3B-4bit', launchedAt: Date.now() },
]));
});
await page.reload({ waitUntil: 'networkidle' });
await page.waitForTimeout(2000);
// Interact with UI elements
await page.locator('text=SELECT MODEL').click();
await page.waitForTimeout(1000);
// Take screenshot
await page.screenshot({ path: '/tmp/screenshot.png', fullPage: false });
await browser.close();
})();
```
### Uploading Images to GitHub PRs
GitHub's API doesn't support direct image upload for PR comments. Workaround:
1. **Commit images to the branch** (temporarily):
```bash
cp /tmp/screenshot.png .
git add screenshot.png
git commit -m "temp: add screenshots for PR"
git push origin <branch>
COMMIT_SHA=$(git rev-parse HEAD)
```
2. **Post PR comment** referencing the raw image URL (uses permanent commit SHA so images survive deletion):
```bash
gh pr comment <PR_NUMBER> --body "![Screenshot](https://raw.githubusercontent.com/exo-explore/exo/${COMMIT_SHA}/screenshot.png)"
```
3. **Remove the images** from the branch:
```bash
git rm screenshot.png
git commit -m "chore: remove temporary screenshot files"
git push origin <branch>
```
The images still render in the PR comment because they reference the permanent commit SHA.
Generated
-100
View File
@@ -353,31 +353,6 @@ dependencies = [
"generic-array",
]
[[package]]
name = "bon"
version = "3.8.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ebeb9aaf9329dff6ceb65c689ca3db33dbf15f324909c60e4e5eef5701ce31b1"
dependencies = [
"bon-macros",
"rustversion",
]
[[package]]
name = "bon-macros"
version = "3.8.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "77e9d642a7e3a318e37c2c9427b5a6a48aa1ad55dcd986f3034ab2239045a645"
dependencies = [
"darling",
"ident_case",
"prettyplease",
"proc-macro2",
"quote",
"rustversion",
"syn 2.0.111",
]
[[package]]
name = "bs58"
version = "0.5.1"
@@ -700,41 +675,6 @@ dependencies = [
"syn 2.0.111",
]
[[package]]
name = "darling"
version = "0.21.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "9cdf337090841a411e2a7f3deb9187445851f91b309c0c0a29e05f74a00a48c0"
dependencies = [
"darling_core",
"darling_macro",
]
[[package]]
name = "darling_core"
version = "0.21.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1247195ecd7e3c85f83c8d2a366e4210d588e802133e1e355180a9870b517ea4"
dependencies = [
"fnv",
"ident_case",
"proc-macro2",
"quote",
"strsim",
"syn 2.0.111",
]
[[package]]
name = "darling_macro"
version = "0.21.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d38308df82d1080de0afee5d069fa14b0326a88c14f15c5ccda35b4a6c414c81"
dependencies = [
"darling_core",
"quote",
"syn 2.0.111",
]
[[package]]
name = "data-encoding"
version = "2.9.0"
@@ -1625,12 +1565,6 @@ dependencies = [
"zerovec",
]
[[package]]
name = "ident_case"
version = "1.0.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b9e0384b61958566e926dc50660321d12159025e767c18e043daf26b70104c39"
[[package]]
name = "idna"
version = "1.1.0"
@@ -1745,15 +1679,6 @@ dependencies = [
"generic-array",
]
[[package]]
name = "internment"
version = "0.8.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "636d4b0f6a39fd684effe2a73f5310df16a3fa7954c26d36833e98f44d1977a2"
dependencies = [
"hashbrown 0.15.5",
]
[[package]]
name = "inventory"
version = "0.3.21"
@@ -3307,16 +3232,6 @@ dependencies = [
"zerocopy",
]
[[package]]
name = "prettyplease"
version = "0.2.37"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "479ca8adacdd7ce8f1fb39ce9ecccbfe93a3f1344b3d0d97f20bc0196208f62b"
dependencies = [
"proc-macro2",
"syn 2.0.111",
]
[[package]]
name = "primeorder"
version = "0.13.6"
@@ -3740,12 +3655,6 @@ dependencies = [
"yasna",
]
[[package]]
name = "recursion"
version = "0.5.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "9dba2197bf7b1d87b4dd460c195f4edeb45a94e82e8054f8d5f317c1f0e93ca1"
[[package]]
name = "redox_syscall"
version = "0.5.18"
@@ -4807,15 +4716,6 @@ checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"
[[package]]
name = "util"
version = "0.0.1"
dependencies = [
"bon",
"derive_more",
"extend",
"internment",
"once_cell",
"recursion",
"thiserror 2.0.17",
]
[[package]]
name = "uuid"
+14 -2
View File
@@ -5,7 +5,7 @@
<img alt="exo logo" src="/docs/imgs/exo-logo-transparent.png" width="50%" height="50%">
</picture>
exo: Run your own AI cluster at home with everyday devices. Maintained by [exo labs](https://x.com/exolabs).
exo: Run frontier AI locally. Maintained by [exo labs](https://x.com/exolabs).
<p align="center">
<a href="https://discord.gg/TJ4P57arEm" target="_blank" rel="noopener noreferrer"><img src="https://img.shields.io/badge/Discord-Join%20Server-5865F2?logo=discord&logoColor=white" alt="Discord"></a>
@@ -107,6 +107,10 @@ uv run exo
This starts the exo dashboard and API at http://localhost:52415/
*Please view the section on RDMA to enable this feature on MacOS >=26.2!*
### Run from Source (Linux)
**Prerequisites:**
@@ -230,7 +234,7 @@ This removes:
RDMA is a new capability added to macOS 26.2. It works on any Mac with Thunderbolt 5 (M4 Pro Mac Mini, M4 Max Mac Studio, M4 Max MacBook Pro, M3 Ultra Mac Studio).
Note that on Mac Studio, you cannot use the Thunderbolt 5 port next to the Ethernet port.
Please refer to the caveats for immediate troubleshooting.
To enable RDMA on macOS, follow these steps:
@@ -247,6 +251,14 @@ To enable RDMA on macOS, follow these steps:
After that, RDMA will be enabled in macOS and exo will take care of the rest.
**Important Caveats**
1. Devices that wish to be part of an RDMA cluster must be connected to all other devices in the cluster.
2. The cables must support TB5.
3. On a Mac Studio, you cannot use the Thunderbolt 5 port next to the Ethernet port.
4. If running from source, please use the script found at `tmp/set_rdma_network_config.sh`, which will disable Thunderbolt Bridge and set dhcp on each RDMA port.
5. RDMA ports may be unable to discover each other on different versions of MacOS. Please ensure that OS versions match exactly (even beta version numbers) on all devices.
---
### Using the API
-14
View File
@@ -1,28 +1,14 @@
2. Currently a lot of requests from the API are timing out, but we still process those requests internally. If an API request times out, we should cancel all corresponding tasks to that API request (why process a request with nobody listening).
3. Task cancellation. When API http request gets cancelled, it should cancel corresponding task.
4. I'd like to see profiled network latency / bandwidth.
5. I'd like to see how much bandwidth each link is using.
6. We should handle the case where one machine doesn't have the model downloaded and then other machines are waiting on it. In this case we get loads of timeout errors because the others are waiting for the one that needs to download the model.
7. Solve the problem of in continuous batching when a new prompt comes in, it will block decode of the current batch until the prefill is complete.
8. We want people to be able to copy models over to a new device without ever connecting EXO to the internet. Right now EXO require internet connection once to cache some files to check if a download is complete. Instead, we should simply check if there is a non-empty model folder locally with no .partial files. This indicates it's a fully downloaded model that can be loaded.
10. More granular control over how to deploy instances.
12. Nix is great but installing it is a pain and we have ended up in a lot of cases having PATH issues or installation issues. For example, after rebooting mike it seemed to no longer have a nix installation and needed reinstalling. It has a bunch of broken symlinks left over from nix that caused ssh to fail, making it even harder to debug. We need consistent environments (perhaps MDM) so we can guarantee nix is installed properly on each machine.
13. Memory pressure instead of memory used.
14. Show the type of each connection (TB5, Ethernet, etc.) in the UI. Refer to old exo: https://github.com/exo-explore/exo/blob/56f783b38dc6b08ce606b07a5386dc40dae00330/exo/helpers.py#L251
15. Prioritise certain connection types (or by latency). TB5 > Ethernet > WiFi. Refer to old exo: https://github.com/exo-explore/exo/blob/56f783b38dc6b08ce606b07a5386dc40dae00330/exo/helpers.py#L251
16. Dynamically switch to higher priority connection when it becomes available. Probably bring back InstanceReplacedAtomically.
17. Faster model loads by streaming model from other devices in cluster.
18. Add support for specifying the type of network connection to use in a test. Depends on 15/16.
20. Add chat completion cancellations (e.g OpenWebUI has something for cancelling an ongoing request).
23. Do we need cache_limit? We went back and forth on that a lot because we thought it might be causing issues. One problem is it sets it relative to model size. So if you have multiple models loaded in it will take the most recent model size for the cache_limit. This is problematic if you launch DeepSeek -> Llama for example.
24. further openai/lmstudio api compatibility
25. Rethink retry logic
26. Task cancellation. When API http request gets cancelled, it should cancel corresponding task.
27. Log cleanup - per-module log filters and default to DEBUG log levels
28. Validate RDMA connections with ibv_devinfo in the info gatherer
Potential refactors:
2. Topology can be simplified
Random errors we've run into:
+4
View File
@@ -342,6 +342,8 @@
SDKROOT = macosx;
SWIFT_ACTIVE_COMPILATION_CONDITIONS = "DEBUG $(inherited)";
SWIFT_OPTIMIZATION_LEVEL = "-Onone";
SWIFT_TREAT_WARNINGS_AS_ERRORS = YES;
GCC_TREAT_WARNINGS_AS_ERRORS = YES;
};
name = Debug;
};
@@ -397,6 +399,8 @@
MTL_FAST_MATH = YES;
SDKROOT = macosx;
SWIFT_COMPILATION_MODE = wholemodule;
SWIFT_TREAT_WARNINGS_AS_ERRORS = YES;
GCC_TREAT_WARNINGS_AS_ERRORS = YES;
};
name = Release;
};
+118 -31
View File
@@ -14,6 +14,7 @@ struct ContentView: View {
@EnvironmentObject private var networkStatusService: NetworkStatusService
@EnvironmentObject private var localNetworkChecker: LocalNetworkChecker
@EnvironmentObject private var updater: SparkleUpdater
@EnvironmentObject private var thunderboltBridgeService: ThunderboltBridgeService
@State private var focusedNode: NodeViewModel?
@State private var deletingInstanceIDs: Set<String> = []
@State private var showAllNodes = false
@@ -24,6 +25,8 @@ struct ContentView: View {
@State private var bugReportMessage: String?
@State private var uninstallInProgress = false
@State private var pendingNamespace: String = ""
@State private var pendingHFToken: String = ""
@State private var pendingEnableImageModels = false
var body: some View {
VStack(alignment: .leading, spacing: 12) {
@@ -303,6 +306,49 @@ struct ContentView: View {
.disabled(pendingNamespace == controller.customNamespace)
}
}
VStack(alignment: .leading, spacing: 4) {
Text("HuggingFace Token")
.font(.caption2)
.foregroundColor(.secondary)
HStack {
SecureField("optional", text: $pendingHFToken)
.textFieldStyle(.roundedBorder)
.font(.caption2)
.onAppear {
pendingHFToken = controller.hfToken
}
Button("Save & Restart") {
controller.hfToken = pendingHFToken
if controller.status == .running || controller.status == .starting {
controller.restart()
}
}
.font(.caption2)
.disabled(pendingHFToken == controller.hfToken)
}
}
Divider()
HStack {
Toggle(
"Enable Image Models (experimental)", isOn: $pendingEnableImageModels
)
.toggleStyle(.switch)
.font(.caption2)
.onAppear {
pendingEnableImageModels = controller.enableImageModels
}
Spacer()
Button("Save & Restart") {
controller.enableImageModels = pendingEnableImageModels
if controller.status == .running || controller.status == .starting {
controller.restart()
}
}
.font(.caption2)
.disabled(pendingEnableImageModels == controller.enableImageModels)
}
HoverButton(title: "Check for Updates", small: true) {
updater.checkForUpdates()
}
@@ -423,6 +469,44 @@ struct ContentView: View {
}
}
/// Shows TB bridge status for all nodes from exo cluster state
private var clusterThunderboltBridgeView: some View {
let bridgeStatuses = stateService.latestSnapshot?.nodeThunderboltBridge ?? [:]
let localNodeId = stateService.localNodeId
let nodeProfiles = stateService.latestSnapshot?.nodeProfiles ?? [:]
return VStack(alignment: .leading, spacing: 1) {
if bridgeStatuses.isEmpty {
Text("Cluster TB Bridge: No data")
.font(.caption2)
.foregroundColor(.secondary)
} else {
Text("Cluster TB Bridge Status:")
.font(.caption2)
.foregroundColor(.secondary)
ForEach(Array(bridgeStatuses.keys.sorted()), id: \.self) { nodeId in
if let status = bridgeStatuses[nodeId] {
let nodeName =
nodeProfiles[nodeId]?.friendlyName ?? String(nodeId.prefix(8))
let isLocal = nodeId == localNodeId
let prefix = isLocal ? " \(nodeName) (local):" : " \(nodeName):"
let statusText =
!status.exists
? "N/A"
: (status.enabled ? "Enabled" : "Disabled")
let color: Color =
!status.exists
? .secondary
: (status.enabled ? .red : .green)
Text("\(prefix) \(statusText)")
.font(.caption2)
.foregroundColor(color)
}
}
}
}
}
private var interfaceIpList: some View {
let statuses = networkStatusService.status.interfaceStatuses
return VStack(alignment: .leading, spacing: 1) {
@@ -465,6 +549,7 @@ struct ContentView: View {
Text(thunderboltStatusText)
.font(.caption2)
.foregroundColor(thunderboltStatusColor)
clusterThunderboltBridgeView
interfaceIpList
rdmaStatusView
sendBugReportButton
@@ -478,21 +563,45 @@ struct ContentView: View {
}
private var rdmaStatusView: some View {
let rdma = networkStatusService.status.rdmaStatus
let rdmaStatuses = stateService.latestSnapshot?.nodeRdmaCtl ?? [:]
let localNodeId = stateService.localNodeId
let nodeProfiles = stateService.latestSnapshot?.nodeProfiles ?? [:]
let localDevices = networkStatusService.status.localRdmaDevices
let localPorts = networkStatusService.status.localRdmaActivePorts
return VStack(alignment: .leading, spacing: 1) {
Text("RDMA: \(rdmaStatusText(rdma))")
.font(.caption2)
.foregroundColor(rdmaStatusColor(rdma))
if !rdma.devices.isEmpty {
Text(" Devices: \(rdma.devices.joined(separator: ", "))")
if rdmaStatuses.isEmpty {
Text("Cluster RDMA: No data")
.font(.caption2)
.foregroundColor(.secondary)
} else {
Text("Cluster RDMA Status:")
.font(.caption2)
.foregroundColor(.secondary)
ForEach(Array(rdmaStatuses.keys.sorted()), id: \.self) { nodeId in
if let status = rdmaStatuses[nodeId] {
let nodeName =
nodeProfiles[nodeId]?.friendlyName ?? String(nodeId.prefix(8))
let isLocal = nodeId == localNodeId
let prefix = isLocal ? " \(nodeName) (local):" : " \(nodeName):"
let statusText = status.enabled ? "Enabled" : "Disabled"
let color: Color = status.enabled ? .green : .orange
Text("\(prefix) \(statusText)")
.font(.caption2)
.foregroundColor(color)
}
}
}
if !localDevices.isEmpty {
Text(" Local Devices: \(localDevices.joined(separator: ", "))")
.font(.caption2)
.foregroundColor(.secondary)
}
if !rdma.activePorts.isEmpty {
Text(" Active Ports:")
if !localPorts.isEmpty {
Text(" Local Active Ports:")
.font(.caption2)
.foregroundColor(.secondary)
ForEach(rdma.activePorts, id: \.device) { port in
ForEach(localPorts, id: \.device) { port in
Text(" \(port.device) port \(port.port): \(port.state)")
.font(.caption2)
.foregroundColor(.green)
@@ -501,28 +610,6 @@ struct ContentView: View {
}
}
private func rdmaStatusText(_ rdma: RDMAStatus) -> String {
switch rdma.rdmaCtlEnabled {
case .some(true):
return "Enabled"
case .some(false):
return "Disabled"
case nil:
return rdma.devices.isEmpty ? "Not Available" : "Available"
}
}
private func rdmaStatusColor(_ rdma: RDMAStatus) -> Color {
switch rdma.rdmaCtlEnabled {
case .some(true):
return .green
case .some(false):
return .orange
case nil:
return rdma.devices.isEmpty ? .secondary : .green
}
}
private var sendBugReportButton: some View {
VStack(alignment: .leading, spacing: 4) {
Button {
+10 -5
View File
@@ -14,13 +14,13 @@ import SwiftUI
import UserNotifications
import os.log
@main
struct EXOApp: App {
@StateObject private var controller: ExoProcessController
@StateObject private var stateService: ClusterStateService
@StateObject private var networkStatusService: NetworkStatusService
@StateObject private var localNetworkChecker: LocalNetworkChecker
@StateObject private var updater: SparkleUpdater
@StateObject private var thunderboltBridgeService: ThunderboltBridgeService
private let terminationObserver: TerminationObserver
private let ciContext = CIContext(options: nil)
@@ -41,10 +41,13 @@ struct EXOApp: App {
let localNetwork = LocalNetworkChecker()
_localNetworkChecker = StateObject(wrappedValue: localNetwork)
_updater = StateObject(wrappedValue: updater)
let thunderboltBridge = ThunderboltBridgeService(clusterStateService: service)
_thunderboltBridgeService = StateObject(wrappedValue: thunderboltBridge)
enableLaunchAtLoginIfNeeded()
NetworkSetupHelper.ensureLaunchDaemonInstalled()
// Check local network access BEFORE launching exo
localNetwork.check()
// Install LaunchDaemon to disable Thunderbolt Bridge on startup (prevents network loops)
NetworkSetupHelper.promptAndInstallIfNeeded()
// Check local network access periodically (warning disappears when user grants permission)
localNetwork.startPeriodicChecking(interval: 10)
controller.scheduleLaunch(after: 15)
service.startPolling()
networkStatus.startPolling()
@@ -58,6 +61,7 @@ struct EXOApp: App {
.environmentObject(networkStatusService)
.environmentObject(localNetworkChecker)
.environmentObject(updater)
.environmentObject(thunderboltBridgeService)
} label: {
menuBarIcon
}
@@ -130,6 +134,7 @@ struct EXOApp: App {
"Failed to register EXO for launch at login: \(error.localizedDescription)")
}
}
}
/// Helper for managing EXO's launch-at-login registration
@@ -219,7 +224,7 @@ private final class ExoUpdaterDelegate: NSObject, SPUUpdaterDelegate {
}
}
private func showNotification(title: String, body: String) {
nonisolated private func showNotification(title: String, body: String) {
let center = UNUserNotificationCenter.current()
let content = UNMutableNotificationContent()
content.title = title
+33 -1
View File
@@ -3,6 +3,8 @@ import Combine
import Foundation
private let customNamespaceKey = "EXOCustomNamespace"
private let hfTokenKey = "EXOHFToken"
private let enableImageModelsKey = "EXOEnableImageModels"
@MainActor
final class ExoProcessController: ObservableObject {
@@ -26,6 +28,10 @@ final class ExoProcessController: ObservableObject {
}
}
static let exoDirectoryURL: URL = {
URL(fileURLWithPath: NSHomeDirectory()).appendingPathComponent(".exo")
}()
@Published private(set) var status: Status = .stopped
@Published private(set) var lastError: String?
@Published private(set) var launchCountdownSeconds: Int?
@@ -37,6 +43,22 @@ final class ExoProcessController: ObservableObject {
UserDefaults.standard.set(customNamespace, forKey: customNamespaceKey)
}
}
@Published var hfToken: String = {
return UserDefaults.standard.string(forKey: hfTokenKey) ?? ""
}()
{
didSet {
UserDefaults.standard.set(hfToken, forKey: hfTokenKey)
}
}
@Published var enableImageModels: Bool = {
return UserDefaults.standard.bool(forKey: enableImageModelsKey)
}()
{
didSet {
UserDefaults.standard.set(enableImageModels, forKey: enableImageModelsKey)
}
}
private var process: Process?
private var runtimeDirectoryURL: URL?
@@ -60,7 +82,11 @@ final class ExoProcessController: ObservableObject {
let child = Process()
child.executableURL = executableURL
child.currentDirectoryURL = runtimeURL
let exoHomeURL = Self.exoDirectoryURL
try? FileManager.default.createDirectory(
at: exoHomeURL, withIntermediateDirectories: true
)
child.currentDirectoryURL = exoHomeURL
child.environment = makeEnvironment(for: runtimeURL)
child.standardOutput = FileHandle.nullDevice
@@ -191,6 +217,12 @@ final class ExoProcessController: ObservableObject {
var environment = ProcessInfo.processInfo.environment
environment["EXO_RUNTIME_DIR"] = runtimeURL.path
environment["EXO_LIBP2P_NAMESPACE"] = computeNamespace()
if !hfToken.isEmpty {
environment["HF_TOKEN"] = hfToken
}
if enableImageModels {
environment["EXO_ENABLE_IMAGE_MODELS"] = "true"
}
var paths: [String] = []
if let existing = environment["PATH"], !existing.isEmpty {
+115 -13
View File
@@ -5,17 +5,44 @@ import Foundation
struct ClusterState: Decodable {
let instances: [String: ClusterInstance]
let runners: [String: RunnerStatusSummary]
let nodeProfiles: [String: NodeProfile]
let tasks: [String: ClusterTask]
let topology: Topology?
let downloads: [String: [NodeDownloadStatus]]
let thunderboltBridgeCycles: [[String]]
// Granular node state (split from the old nodeProfiles)
let nodeIdentities: [String: NodeIdentity]
let nodeMemory: [String: MemoryInfo]
let nodeSystem: [String: SystemInfo]
let nodeThunderboltBridge: [String: ThunderboltBridgeStatus]
let nodeRdmaCtl: [String: NodeRdmaCtlStatus]
/// Computed property for backwards compatibility - merges granular state into NodeProfile
var nodeProfiles: [String: NodeProfile] {
var profiles: [String: NodeProfile] = [:]
let allNodeIds = Set(nodeIdentities.keys)
.union(nodeMemory.keys)
.union(nodeSystem.keys)
for nodeId in allNodeIds {
let identity = nodeIdentities[nodeId]
let memory = nodeMemory[nodeId]
let system = nodeSystem[nodeId]
profiles[nodeId] = NodeProfile(
modelId: identity?.modelId,
chipId: identity?.chipId,
friendlyName: identity?.friendlyName,
memory: memory,
system: system
)
}
return profiles
}
init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: CodingKeys.self)
let rawInstances = try container.decode([String: TaggedInstance].self, forKey: .instances)
self.instances = rawInstances.mapValues(\.instance)
self.runners = try container.decode([String: RunnerStatusSummary].self, forKey: .runners)
self.nodeProfiles = try container.decode([String: NodeProfile].self, forKey: .nodeProfiles)
let rawTasks =
try container.decodeIfPresent([String: TaggedTask].self, forKey: .tasks) ?? [:]
self.tasks = rawTasks.compactMapValues(\.task)
@@ -24,15 +51,39 @@ struct ClusterState: Decodable {
try container.decodeIfPresent([String: [TaggedNodeDownload]].self, forKey: .downloads)
?? [:]
self.downloads = rawDownloads.mapValues { $0.compactMap(\.status) }
self.thunderboltBridgeCycles =
try container.decodeIfPresent([[String]].self, forKey: .thunderboltBridgeCycles) ?? []
// Granular node state
self.nodeIdentities =
try container.decodeIfPresent([String: NodeIdentity].self, forKey: .nodeIdentities)
?? [:]
self.nodeMemory =
try container.decodeIfPresent([String: MemoryInfo].self, forKey: .nodeMemory) ?? [:]
self.nodeSystem =
try container.decodeIfPresent([String: SystemInfo].self, forKey: .nodeSystem) ?? [:]
self.nodeThunderboltBridge =
try container.decodeIfPresent(
[String: ThunderboltBridgeStatus].self, forKey: .nodeThunderboltBridge
) ?? [:]
self.nodeRdmaCtl =
try container.decodeIfPresent(
[String: NodeRdmaCtlStatus].self, forKey: .nodeRdmaCtl
) ?? [:]
}
private enum CodingKeys: String, CodingKey {
case instances
case runners
case nodeProfiles
case topology
case tasks
case downloads
case thunderboltBridgeCycles
case nodeIdentities
case nodeMemory
case nodeSystem
case nodeThunderboltBridge
case nodeRdmaCtl
}
}
@@ -102,6 +153,22 @@ struct NodeProfile: Decodable {
let system: SystemInfo?
}
struct NodeIdentity: Decodable {
let modelId: String?
let chipId: String?
let friendlyName: String?
}
struct ThunderboltBridgeStatus: Decodable {
let enabled: Bool
let exists: Bool
let serviceName: String?
}
struct NodeRdmaCtlStatus: Decodable {
let enabled: Bool
}
struct MemoryInfo: Decodable {
let ramTotal: MemoryValue?
let ramAvailable: MemoryValue?
@@ -120,16 +187,51 @@ struct SystemInfo: Decodable {
}
struct Topology: Decodable {
let nodes: [TopologyNode]
let connections: [TopologyConnection]?
/// Node IDs in the topology
let nodes: [String]
/// Flattened list of connections (source -> sink pairs)
let connections: [TopologyConnection]
init(from decoder: Decoder) throws {
let container = try decoder.container(keyedBy: CodingKeys.self)
self.nodes = try container.decodeIfPresent([String].self, forKey: .nodes) ?? []
// Connections come as nested map: { source: { sink: [edges] } }
// We flatten to array of (source, sink) pairs
var flatConnections: [TopologyConnection] = []
if let nested = try container.decodeIfPresent(
[String: [String: [AnyCodable]]].self, forKey: .connections
) {
for (source, sinks) in nested {
for sink in sinks.keys {
flatConnections.append(
TopologyConnection(localNodeId: source, sendBackNodeId: sink))
}
}
}
self.connections = flatConnections
}
private enum CodingKeys: String, CodingKey {
case nodes
case connections
}
}
struct TopologyNode: Decodable {
let nodeId: String
let nodeProfile: NodeProfile
/// Placeholder for decoding arbitrary JSON values we don't need to inspect
private struct AnyCodable: Decodable {
init(from decoder: Decoder) throws {
// Just consume the value without storing it
_ = try? decoder.singleValueContainer().decode(Bool.self)
_ = try? decoder.singleValueContainer().decode(Int.self)
_ = try? decoder.singleValueContainer().decode(Double.self)
_ = try? decoder.singleValueContainer().decode(String.self)
_ = try? decoder.singleValueContainer().decode([AnyCodable].self)
_ = try? decoder.singleValueContainer().decode([String: AnyCodable].self)
}
}
struct TopologyConnection: Decodable {
struct TopologyConnection {
let localNodeId: String
let sendBackNodeId: String
}
@@ -201,7 +303,7 @@ struct ClusterTask {
let modelName: String?
let promptPreview: String?
let errorMessage: String?
let parameters: ChatCompletionTaskParameters?
let parameters: TextGenerationTaskParameters?
var sortPriority: Int {
switch status {
@@ -238,12 +340,12 @@ struct ClusterTaskPayload: Decodable {
let taskStatus: TaskStatus?
let instanceId: String?
let commandId: String?
let taskParams: ChatCompletionTaskParameters?
let taskParams: TextGenerationTaskParameters?
let errorType: String?
let errorMessage: String?
}
struct ChatCompletionTaskParameters: Decodable, Equatable {
struct TextGenerationTaskParameters: Decodable, Equatable {
let model: String?
let messages: [ChatCompletionMessage]?
let maxTokens: Int?
@@ -282,7 +384,7 @@ extension ClusterTask {
guard let id = payload.taskId else { return nil }
let status = payload.taskStatus ?? .unknown
switch kindKey {
case "ChatCompletion":
case "TextGeneration":
self.init(
id: id,
status: status,
+93 -26
View File
@@ -44,31 +44,38 @@ struct BugReportService {
let dayPrefix = Self.dayPrefixString(now)
let prefix = "reports/\(dayPrefix)/\(timestamp)/"
let logData = readLog()
let logFiles = readAllLogs()
let ifconfigText = try await captureIfconfig()
let hostName = Host.current().localizedName ?? "unknown"
let debugInfo = readDebugInfo()
async let stateResult = fetch(url: baseURL.appendingPathComponent("state"))
async let eventsResult = fetch(url: baseURL.appendingPathComponent("events"))
let stateData = try await fetch(url: baseURL.appendingPathComponent("state"))
let stateData = try await stateResult
let eventsData = try await eventsResult
// Extract cluster TB bridge status from exo state
let clusterTbBridgeStatus = extractClusterTbBridgeStatus(from: stateData)
let reportJSON = makeReportJson(
timestamp: timestamp,
hostName: hostName,
ifconfig: ifconfigText,
debugInfo: debugInfo,
isManual: isManual
isManual: isManual,
clusterTbBridgeStatus: clusterTbBridgeStatus
)
let uploads: [(path: String, data: Data?)] = [
("\(prefix)exo.log", logData),
let eventLogFiles = readAllEventLogs()
var uploads: [(path: String, data: Data?)] = logFiles.map { (path, data) in
("\(prefix)\(path)", data)
}
uploads.append(
contentsOf: eventLogFiles.map { (path, data) in
("\(prefix)\(path)", data as Data?)
})
uploads.append(contentsOf: [
("\(prefix)state.json", stateData),
("\(prefix)events.json", eventsData),
("\(prefix)report.json", reportJSON),
]
])
let uploadItems: [(key: String, body: Data)] = uploads.compactMap { item in
guard let body = item.data else { return nil }
@@ -145,11 +152,40 @@ struct BugReportService {
return decoded.urls
}
private func readLog() -> Data? {
let logURL = URL(fileURLWithPath: NSHomeDirectory())
private func readAllLogs() -> [(path: String, data: Data)] {
let dir = URL(fileURLWithPath: NSHomeDirectory())
.appendingPathComponent(".exo")
.appendingPathComponent("exo.log")
return try? Data(contentsOf: logURL)
.appendingPathComponent("exo_log")
var results: [(path: String, data: Data)] = []
let contents = (try? FileManager.default.contentsOfDirectory(atPath: dir.path)) ?? []
for name in contents {
if let data = try? Data(contentsOf: dir.appendingPathComponent(name)) {
results.append(("exo_log/\(name)", data))
}
}
return results
}
private func readAllEventLogs() -> [(path: String, data: Data)] {
let eventLogDir = URL(fileURLWithPath: NSHomeDirectory())
.appendingPathComponent(".exo")
.appendingPathComponent("event_log")
var results: [(path: String, data: Data)] = []
for subdir in ["master", "api"] {
let dir = eventLogDir.appendingPathComponent(subdir)
let contents =
(try? FileManager.default.contentsOfDirectory(atPath: dir.path)) ?? []
for name in contents where name.hasPrefix("events.") {
if let data = try? Data(contentsOf: dir.appendingPathComponent(name)) {
results.append(("event_log/\(subdir)/\(name)", data))
}
}
}
return results
}
private func captureIfconfig() async throws -> String {
@@ -178,18 +214,19 @@ struct BugReportService {
}
private func readThunderboltBridgeDisabled() -> Bool? {
let result = runCommand([
"/usr/sbin/networksetup", "-getnetworkserviceenabled", "Thunderbolt Bridge",
])
guard result.exitCode == 0 else { return nil }
let output = result.output.lowercased()
if output.contains("enabled") {
return false
// Dynamically find the Thunderbolt Bridge service (don't assume the name)
guard let serviceName = ThunderboltBridgeDetector.findThunderboltBridgeServiceName() else {
// No bridge containing Thunderbolt interfaces exists
return nil
}
if output.contains("disabled") {
return true
guard let isEnabled = ThunderboltBridgeDetector.isServiceEnabled(serviceName: serviceName)
else {
return nil
}
return nil
// Return true if disabled, false if enabled
return !isEnabled
}
private func readInterfaces() -> [DebugInfo.InterfaceStatus] {
@@ -268,11 +305,12 @@ struct BugReportService {
hostName: String,
ifconfig: String,
debugInfo: DebugInfo,
isManual: Bool
isManual: Bool,
clusterTbBridgeStatus: [[String: Any]]?
) -> Data? {
let system = readSystemMetadata()
let exo = readExoMetadata()
let payload: [String: Any] = [
var payload: [String: Any] = [
"timestamp": timestamp,
"host": hostName,
"ifconfig": ifconfig,
@@ -282,9 +320,38 @@ struct BugReportService {
"exo_commit": exo.commit as Any,
"report_type": isManual ? "manual" : "automated",
]
if let tbStatus = clusterTbBridgeStatus {
payload["cluster_thunderbolt_bridge"] = tbStatus
}
return try? JSONSerialization.data(withJSONObject: payload, options: [.prettyPrinted])
}
/// Extracts cluster-wide Thunderbolt Bridge status from exo state JSON
private func extractClusterTbBridgeStatus(from stateData: Data?) -> [[String: Any]]? {
guard let data = stateData,
let json = try? JSONSerialization.jsonObject(with: data) as? [String: Any],
let nodeThunderboltBridge = json["node_thunderbolt_bridge"] as? [String: [String: Any]]
else {
return nil
}
var result: [[String: Any]] = []
for (nodeId, status) in nodeThunderboltBridge {
var entry: [String: Any] = ["node_id": nodeId]
if let enabled = status["enabled"] as? Bool {
entry["enabled"] = enabled
}
if let exists = status["exists"] as? Bool {
entry["exists"] = exists
}
if let serviceName = status["service_name"] as? String {
entry["service_name"] = serviceName
}
result.append(entry)
}
return result.isEmpty ? nil : result
}
private func readSystemMetadata() -> [String: Any] {
let hostname = safeRunCommand(["/bin/hostname"])
let computerName = safeRunCommand(["/usr/sbin/scutil", "--get", "ComputerName"])
+38 -4
View File
@@ -41,6 +41,7 @@ final class LocalNetworkChecker: ObservableObject {
private var connection: NWConnection?
private var checkTask: Task<Void, Never>?
private var periodicTask: Task<Void, Never>?
/// Whether we've completed at least one check (stored in UserDefaults)
private var hasCompletedInitialCheck: Bool {
@@ -48,10 +49,39 @@ final class LocalNetworkChecker: ObservableObject {
set { UserDefaults.standard.set(newValue, forKey: Self.hasCompletedInitialCheckKey) }
}
/// Checks if local network access is working.
/// Checks if local network access is working (one-time check).
func check() {
performCheck()
}
/// Starts periodic checking of local network access.
/// Re-checks every `interval` seconds so the warning disappears when user grants permission.
func startPeriodicChecking(interval: TimeInterval = 10) {
stopPeriodicChecking()
// Do an immediate check first
performCheck()
// Then schedule periodic checks
periodicTask = Task { [weak self] in
while !Task.isCancelled {
try? await Task.sleep(nanoseconds: UInt64(interval * 1_000_000_000))
guard !Task.isCancelled else { break }
self?.performCheck()
}
}
}
/// Stops periodic checking.
func stopPeriodicChecking() {
periodicTask?.cancel()
periodicTask = nil
}
private func performCheck() {
checkTask?.cancel()
status = .checking
// Only show "checking" status on first check to avoid UI flicker
if status == .unknown {
status = .checking
}
// Use longer timeout on first launch to allow time for permission prompt
let isFirstCheck = !hasCompletedInitialCheck
@@ -60,12 +90,15 @@ final class LocalNetworkChecker: ObservableObject {
checkTask = Task { [weak self] in
guard let self else { return }
Self.logger.info("Checking local network connectivity (first check: \(isFirstCheck))")
Self.logger.debug("Checking local network connectivity (first check: \(isFirstCheck))")
let result = await self.checkConnectivity(timeout: timeout)
self.status = result
self.hasCompletedInitialCheck = true
Self.logger.info("Local network check complete: \(result.displayText)")
// Only log on state changes or first check to reduce noise
if isFirstCheck || result != self.status {
Self.logger.info("Local network check: \(result.displayText)")
}
}
}
@@ -141,6 +174,7 @@ final class LocalNetworkChecker: ObservableObject {
}
func stop() {
stopPeriodicChecking()
checkTask?.cancel()
checkTask = nil
connection?.cancel()
+201 -49
View File
@@ -7,14 +7,20 @@ enum NetworkSetupHelper {
private static let daemonLabel = "io.exo.networksetup"
private static let scriptDestination =
"/Library/Application Support/EXO/disable_bridge.sh"
// Legacy script path from older versions
private static let legacyScriptDestination =
"/Library/Application Support/EXO/disable_bridge_enable_dhcp.sh"
private static let plistDestination = "/Library/LaunchDaemons/io.exo.networksetup.plist"
private static let requiredStartInterval: Int = 1791
private static let requiredStartInterval: Int = 1786
private static let setupScript = """
#!/usr/bin/env bash
set -euo pipefail
# Wait for macOS to finish network setup after boot
sleep 20
PREFS="/Library/Preferences/SystemConfiguration/preferences.plist"
# Remove bridge0 interface
@@ -28,19 +34,69 @@ enum NetworkSetupHelper {
# Remove Thunderbolt Bridge from VirtualNetworkInterfaces in preferences.plist
/usr/libexec/PlistBuddy -c "Delete :VirtualNetworkInterfaces:Bridge:bridge0" "$PREFS" 2>/dev/null || true
networksetup -listlocations | grep -q exo || {
networksetup -createlocation exo
}
networksetup -switchtolocation exo
networksetup -listallhardwareports \\
| awk -F': ' '/Hardware Port: / {print $2}' \\
| while IFS=":" read -r name; do
case "$name" in
"Ethernet Adapter"*)
;;
"Thunderbolt Bridge")
;;
"Thunderbolt "*)
networksetup -listallnetworkservices \\
| grep -q "EXO $name" \\
|| networksetup -createnetworkservice "EXO $name" "$name" 2>/dev/null \\
|| continue
networksetup -setdhcp "EXO $name"
;;
*)
networksetup -listallnetworkservices \\
| grep -q "$name" \\
|| networksetup -createnetworkservice "$name" "$name" 2>/dev/null \\
|| continue
;;
esac
done
networksetup -listnetworkservices | grep -q "Thunderbolt Bridge" && {
networksetup -setnetworkserviceenabled "Thunderbolt Bridge" off
} || true
"""
static func ensureLaunchDaemonInstalled() {
/// Prompts user and installs the LaunchDaemon if not already installed.
/// Shows an alert explaining what will be installed before requesting admin privileges.
static func promptAndInstallIfNeeded() {
// Use .utility priority to match NSAppleScript's internal QoS and avoid priority inversion
Task.detached(priority: .utility) {
// If already correctly installed, skip
if daemonAlreadyInstalled() {
return
}
// Show alert on main thread
let shouldInstall = await MainActor.run {
let alert = NSAlert()
alert.messageText = "EXO Network Configuration"
alert.informativeText =
"EXO needs to install a system service to configure local networking. This will disable Thunderbolt Bridge (preventing packet storms) and install a Network Location.\n\nYou will be prompted for your password."
alert.alertStyle = .informational
alert.addButton(withTitle: "Install")
alert.addButton(withTitle: "Not Now")
return alert.runModal() == .alertFirstButtonReturn
}
guard shouldInstall else {
logger.info("User deferred network setup daemon installation")
return
}
do {
if daemonAlreadyInstalled() {
return
}
try await installLaunchDaemon()
try installLaunchDaemon()
logger.info("Network setup launch daemon installed and started")
} catch {
logger.error(
@@ -63,48 +119,9 @@ enum NetworkSetupHelper {
static func hasInstalledComponents() -> Bool {
let manager = FileManager.default
let scriptExists = manager.fileExists(atPath: scriptDestination)
let legacyScriptExists = manager.fileExists(atPath: legacyScriptDestination)
let plistExists = manager.fileExists(atPath: plistDestination)
return scriptExists || plistExists
}
private static func makeUninstallScript() -> String {
"""
set -euo pipefail
LABEL="\(daemonLabel)"
SCRIPT_DEST="\(scriptDestination)"
PLIST_DEST="\(plistDestination)"
LOG_OUT="/var/log/\(daemonLabel).log"
LOG_ERR="/var/log/\(daemonLabel).err.log"
# Unload the LaunchDaemon if running
launchctl bootout system/"$LABEL" 2>/dev/null || true
# Remove LaunchDaemon plist
rm -f "$PLIST_DEST"
# Remove the script and parent directory if empty
rm -f "$SCRIPT_DEST"
rmdir "$(dirname "$SCRIPT_DEST")" 2>/dev/null || true
# Remove log files
rm -f "$LOG_OUT" "$LOG_ERR"
# Switch back to Automatic network location
networksetup -switchtolocation Automatic 2>/dev/null || true
# Delete the exo network location if it exists
networksetup -listlocations | grep -q '^exo$' && {
networksetup -deletelocation exo 2>/dev/null || true
} || true
# Re-enable Thunderbolt Bridge if it exists
networksetup -listnetworkservices | grep -q "Thunderbolt Bridge" && {
networksetup -setnetworkserviceenabled "Thunderbolt Bridge" on 2>/dev/null || true
} || true
echo "EXO network components removed successfully"
"""
return scriptExists || legacyScriptExists || plistExists
}
private static func daemonAlreadyInstalled() -> Bool {
@@ -140,7 +157,7 @@ enum NetworkSetupHelper {
return true
}
private static func installLaunchDaemon() async throws {
private static func installLaunchDaemon() throws {
let installerScript = makeInstallerScript()
try runShellAsAdmin(installerScript)
}
@@ -151,8 +168,19 @@ enum NetworkSetupHelper {
LABEL="\(daemonLabel)"
SCRIPT_DEST="\(scriptDestination)"
LEGACY_SCRIPT_DEST="\(legacyScriptDestination)"
PLIST_DEST="\(plistDestination)"
LOG_OUT="/var/log/\(daemonLabel).log"
LOG_ERR="/var/log/\(daemonLabel).err.log"
# First, completely remove any existing installation
launchctl bootout system/"$LABEL" 2>/dev/null || true
rm -f "$PLIST_DEST"
rm -f "$SCRIPT_DEST"
rm -f "$LEGACY_SCRIPT_DEST"
rm -f "$LOG_OUT" "$LOG_ERR"
# Install fresh
mkdir -p "$(dirname "$SCRIPT_DEST")"
cat > "$SCRIPT_DEST" <<'EOF_SCRIPT'
@@ -184,13 +212,137 @@ enum NetworkSetupHelper {
</plist>
EOF_PLIST
launchctl bootout system/"$LABEL" >/dev/null 2>&1 || true
launchctl bootstrap system "$PLIST_DEST"
launchctl enable system/"$LABEL"
launchctl kickstart -k system/"$LABEL"
"""
}
private static func makeUninstallScript() -> String {
"""
set -euo pipefail
LABEL="\(daemonLabel)"
SCRIPT_DEST="\(scriptDestination)"
LEGACY_SCRIPT_DEST="\(legacyScriptDestination)"
PLIST_DEST="\(plistDestination)"
LOG_OUT="/var/log/\(daemonLabel).log"
LOG_ERR="/var/log/\(daemonLabel).err.log"
# Unload the LaunchDaemon if running
launchctl bootout system/"$LABEL" 2>/dev/null || true
# Remove LaunchDaemon plist
rm -f "$PLIST_DEST"
# Remove the script (current and legacy paths) and parent directory if empty
rm -f "$SCRIPT_DEST"
rm -f "$LEGACY_SCRIPT_DEST"
rmdir "$(dirname "$SCRIPT_DEST")" 2>/dev/null || true
# Remove log files
rm -f "$LOG_OUT" "$LOG_ERR"
# Switch back to Automatic network location
networksetup -switchtolocation Automatic >/dev/null 2>&1 || true
# Delete the exo network location if it exists
networksetup -listlocations 2>/dev/null | grep -q '^exo$' && {
networksetup -deletelocation exo >/dev/null 2>&1 || true
} || true
# Re-enable any Thunderbolt Bridge service if it exists
# We find it dynamically by looking for bridges containing Thunderbolt interfaces
find_and_enable_thunderbolt_bridge() {
# Get Thunderbolt interface devices from hardware ports
tb_devices=$(networksetup -listallhardwareports 2>/dev/null | awk '
/^Hardware Port:/ { port = tolower(substr($0, 16)) }
/^Device:/ { if (port ~ /thunderbolt/) print substr($0, 9) }
') || true
[ -z "$tb_devices" ] && return 0
# For each bridge device, check if it contains Thunderbolt interfaces
for bridge in bridge0 bridge1 bridge2; do
members=$(ifconfig "$bridge" 2>/dev/null | awk '/member:/ {print $2}') || true
[ -z "$members" ] && continue
for tb_dev in $tb_devices; do
if echo "$members" | grep -qx "$tb_dev"; then
# Find the service name for this bridge device
service_name=$(networksetup -listnetworkserviceorder 2>/dev/null | awk -v dev="$bridge" '
/^\\([0-9*]/ { gsub(/^\\([0-9*]+\\) /, ""); svc = $0 }
/Device:/ && $0 ~ dev { print svc; exit }
') || true
if [ -n "$service_name" ]; then
networksetup -setnetworkserviceenabled "$service_name" on 2>/dev/null || true
return 0
fi
fi
done
done
return 0
}
find_and_enable_thunderbolt_bridge || true
echo "EXO network components removed successfully"
"""
}
/// Direct install without GUI (requires root).
/// Returns true on success, false on failure.
static func installDirectly() -> Bool {
let script = makeInstallerScript()
return runShellDirectly(script)
}
/// Direct uninstall without GUI (requires root).
/// Returns true on success, false on failure.
static func uninstallDirectly() -> Bool {
let script = makeUninstallScript()
return runShellDirectly(script)
}
/// Run a shell script directly via Process (no AppleScript, requires root).
/// Returns true on success, false on failure.
private static func runShellDirectly(_ script: String) -> Bool {
let process = Process()
process.executableURL = URL(fileURLWithPath: "/bin/bash")
process.arguments = ["-c", script]
let outputPipe = Pipe()
let errorPipe = Pipe()
process.standardOutput = outputPipe
process.standardError = errorPipe
do {
try process.run()
process.waitUntilExit()
let outputData = outputPipe.fileHandleForReading.readDataToEndOfFile()
let errorData = errorPipe.fileHandleForReading.readDataToEndOfFile()
if let output = String(data: outputData, encoding: .utf8), !output.isEmpty {
print(output)
}
if let errorOutput = String(data: errorData, encoding: .utf8), !errorOutput.isEmpty {
fputs(errorOutput, stderr)
}
if process.terminationStatus == 0 {
logger.info("Shell script completed successfully")
return true
} else {
logger.error("Shell script failed with exit code \(process.terminationStatus)")
return false
}
} catch {
logger.error(
"Failed to run shell script: \(error.localizedDescription, privacy: .public)")
fputs("Error: \(error.localizedDescription)\n", stderr)
return false
}
}
private static func runShellAsAdmin(_ script: String) throws {
let escapedScript =
script
+16 -50
View File
@@ -35,28 +35,18 @@ struct NetworkStatus: Equatable {
let thunderboltBridgeState: ThunderboltState?
let bridgeInactive: Bool?
let interfaceStatuses: [InterfaceIpStatus]
let rdmaStatus: RDMAStatus
let localRdmaDevices: [String]
let localRdmaActivePorts: [RDMAPort]
static let empty = NetworkStatus(
thunderboltBridgeState: nil,
bridgeInactive: nil,
interfaceStatuses: [],
rdmaStatus: .empty
localRdmaDevices: [],
localRdmaActivePorts: []
)
}
struct RDMAStatus: Equatable {
let rdmaCtlEnabled: Bool?
let devices: [String]
let activePorts: [RDMAPort]
var isAvailable: Bool {
rdmaCtlEnabled == true || !devices.isEmpty
}
static let empty = RDMAStatus(rdmaCtlEnabled: nil, devices: [], activePorts: [])
}
struct RDMAPort: Equatable {
let device: String
let port: String
@@ -80,31 +70,11 @@ private struct NetworkStatusFetcher {
thunderboltBridgeState: readThunderboltBridgeState(),
bridgeInactive: readBridgeInactive(),
interfaceStatuses: readInterfaceStatuses(),
rdmaStatus: readRDMAStatus()
localRdmaDevices: readRDMADevices(),
localRdmaActivePorts: readRDMAActivePorts()
)
}
private func readRDMAStatus() -> RDMAStatus {
let rdmaCtlEnabled = readRDMACtlEnabled()
let devices = readRDMADevices()
let activePorts = readRDMAActivePorts()
return RDMAStatus(
rdmaCtlEnabled: rdmaCtlEnabled, devices: devices, activePorts: activePorts)
}
private func readRDMACtlEnabled() -> Bool? {
let result = runCommand(["rdma_ctl", "status"])
guard result.exitCode == 0 else { return nil }
let output = result.output.lowercased().trimmingCharacters(in: .whitespacesAndNewlines)
if output.contains("enabled") {
return true
}
if output.contains("disabled") {
return false
}
return nil
}
private func readRDMADevices() -> [String] {
let result = runCommand(["ibv_devices"])
guard result.exitCode == 0 else { return [] }
@@ -153,22 +123,18 @@ private struct NetworkStatusFetcher {
}
private func readThunderboltBridgeState() -> ThunderboltState? {
let result = runCommand(["networksetup", "-getnetworkserviceenabled", "Thunderbolt Bridge"])
guard result.exitCode == 0 else {
let lower = result.output.lowercased() + result.error.lowercased()
if lower.contains("not a recognized network service") {
return .deleted
}
// Dynamically find the Thunderbolt Bridge service (don't assume the name)
guard let serviceName = ThunderboltBridgeDetector.findThunderboltBridgeServiceName() else {
// No bridge containing Thunderbolt interfaces exists
return .deleted
}
guard let isEnabled = ThunderboltBridgeDetector.isServiceEnabled(serviceName: serviceName)
else {
return nil
}
let output = result.output.lowercased()
if output.contains("enabled") {
return .enabled
}
if output.contains("disabled") {
return .disabled
}
return nil
return isEnabled ? .enabled : .disabled
}
private func readBridgeInactive() -> Bool? {
@@ -0,0 +1,194 @@
import Foundation
import os.log
/// Utility for dynamically detecting Thunderbolt Bridge network services.
/// This mirrors the Python logic in info_gatherer.py - we never assume the service
/// is named "Thunderbolt Bridge", instead we find bridges containing Thunderbolt interfaces.
enum ThunderboltBridgeDetector {
private static let logger = Logger(
subsystem: "io.exo.EXO", category: "ThunderboltBridgeDetector")
struct CommandResult {
let exitCode: Int32
let output: String
let error: String
}
/// Find the network service name of a bridge containing Thunderbolt interfaces.
/// Returns nil if no such bridge exists.
static func findThunderboltBridgeServiceName() -> String? {
// 1. Get all Thunderbolt interface devices (e.g., en2, en3)
guard let thunderboltDevices = getThunderboltDevices(), !thunderboltDevices.isEmpty else {
logger.debug("No Thunderbolt devices found")
return nil
}
logger.debug("Found Thunderbolt devices: \(thunderboltDevices.joined(separator: ", "))")
// 2. Get bridge services from network service order
guard let bridgeServices = getBridgeServices(), !bridgeServices.isEmpty else {
logger.debug("No bridge services found")
return nil
}
logger.debug("Found bridge services: \(bridgeServices.keys.joined(separator: ", "))")
// 3. Find a bridge that contains Thunderbolt interfaces
for (bridgeDevice, serviceName) in bridgeServices {
let members = getBridgeMembers(bridgeDevice: bridgeDevice)
logger.debug(
"Bridge \(bridgeDevice) (\(serviceName)) has members: \(members.joined(separator: ", "))"
)
// Check if any Thunderbolt device is a member of this bridge
if !members.isDisjoint(with: thunderboltDevices) {
logger.info(
"Found Thunderbolt Bridge service: '\(serviceName)' (device: \(bridgeDevice))")
return serviceName
}
}
logger.debug("No bridge found containing Thunderbolt interfaces")
return nil
}
/// Get Thunderbolt interface device names (e.g., en2, en3) from hardware ports.
private static func getThunderboltDevices() -> Set<String>? {
let result = runCommand(["networksetup", "-listallhardwareports"])
guard result.exitCode == 0 else {
logger.warning("networksetup -listallhardwareports failed: \(result.error)")
return nil
}
var thunderboltDevices: Set<String> = []
var currentPort: String?
for line in result.output.components(separatedBy: .newlines) {
let trimmed = line.trimmingCharacters(in: .whitespaces)
if trimmed.hasPrefix("Hardware Port:") {
currentPort = String(trimmed.dropFirst("Hardware Port:".count)).trimmingCharacters(
in: .whitespaces)
} else if trimmed.hasPrefix("Device:"), let port = currentPort {
let device = String(trimmed.dropFirst("Device:".count)).trimmingCharacters(
in: .whitespaces)
if port.lowercased().contains("thunderbolt") {
thunderboltDevices.insert(device)
}
currentPort = nil
}
}
return thunderboltDevices
}
/// Get mapping of bridge device -> service name from network service order.
private static func getBridgeServices() -> [String: String]? {
let result = runCommand(["networksetup", "-listnetworkserviceorder"])
guard result.exitCode == 0 else {
logger.warning("networksetup -listnetworkserviceorder failed: \(result.error)")
return nil
}
// Parse service order to find bridge devices and their service names
// Format: "(1) Service Name\n(Hardware Port: ..., Device: bridge0)\n"
var bridgeServices: [String: String] = [:]
var currentService: String?
for line in result.output.components(separatedBy: .newlines) {
let trimmed = line.trimmingCharacters(in: .whitespaces)
// Match "(N) Service Name" or "(*) Service Name" (disabled)
// but NOT "(Hardware Port: ...)" lines
if trimmed.hasPrefix("("), trimmed.contains(")"),
!trimmed.hasPrefix("(Hardware Port:")
{
if let parenEnd = trimmed.firstIndex(of: ")") {
let afterParen = trimmed.index(after: parenEnd)
if afterParen < trimmed.endIndex {
currentService =
String(trimmed[afterParen...])
.trimmingCharacters(in: .whitespaces)
}
}
}
// Match "(Hardware Port: ..., Device: bridgeX)"
else if let service = currentService, trimmed.contains("Device: bridge") {
// Extract device name from "..., Device: bridge0)"
if let deviceRange = trimmed.range(of: "Device: ") {
let afterDevice = trimmed[deviceRange.upperBound...]
if let parenIndex = afterDevice.firstIndex(of: ")") {
let device = String(afterDevice[..<parenIndex])
bridgeServices[device] = service
}
}
}
}
return bridgeServices
}
/// Get member interfaces of a bridge device via ifconfig.
private static func getBridgeMembers(bridgeDevice: String) -> Set<String> {
let result = runCommand(["ifconfig", bridgeDevice])
guard result.exitCode == 0 else {
logger.debug("ifconfig \(bridgeDevice) failed")
return []
}
var members: Set<String> = []
for line in result.output.components(separatedBy: .newlines) {
let trimmed = line.trimmingCharacters(in: .whitespaces)
if trimmed.hasPrefix("member:") {
let parts = trimmed.split(separator: " ")
if parts.count > 1 {
members.insert(String(parts[1]))
}
}
}
return members
}
/// Check if a network service is enabled.
static func isServiceEnabled(serviceName: String) -> Bool? {
let result = runCommand(["networksetup", "-getnetworkserviceenabled", serviceName])
guard result.exitCode == 0 else {
logger.warning("Failed to check if '\(serviceName)' is enabled: \(result.error)")
return nil
}
let output = result.output.lowercased().trimmingCharacters(in: .whitespacesAndNewlines)
if output.contains("enabled") {
return true
}
if output.contains("disabled") {
return false
}
return nil
}
private static func runCommand(_ arguments: [String]) -> CommandResult {
let process = Process()
process.launchPath = "/usr/bin/env"
process.arguments = arguments
let stdout = Pipe()
let stderr = Pipe()
process.standardOutput = stdout
process.standardError = stderr
do {
try process.run()
} catch {
return CommandResult(exitCode: -1, output: "", error: error.localizedDescription)
}
process.waitUntilExit()
let outputData = stdout.fileHandleForReading.readDataToEndOfFile()
let errorData = stderr.fileHandleForReading.readDataToEndOfFile()
return CommandResult(
exitCode: process.terminationStatus,
output: String(decoding: outputData, as: UTF8.self),
error: String(decoding: errorData, as: UTF8.self)
)
}
}
@@ -0,0 +1,261 @@
import AppKit
import Combine
import Foundation
import Security
import SystemConfiguration
import os.log
@MainActor
final class ThunderboltBridgeService: ObservableObject {
private static let logger = Logger(subsystem: "io.exo.EXO", category: "ThunderboltBridge")
@Published private(set) var detectedCycle: [String]?
@Published private(set) var hasPromptedForCurrentCycle = false
@Published private(set) var lastError: String?
private weak var clusterStateService: ClusterStateService?
private var cancellables = Set<AnyCancellable>()
private var previousCycleSignature: String?
init(clusterStateService: ClusterStateService) {
self.clusterStateService = clusterStateService
setupObserver()
}
private func setupObserver() {
guard let service = clusterStateService else { return }
service.$latestSnapshot
.compactMap { $0 }
.sink { [weak self] snapshot in
self?.checkForCycles(snapshot: snapshot)
}
.store(in: &cancellables)
}
private func checkForCycles(snapshot: ClusterState) {
let cycles = snapshot.thunderboltBridgeCycles
// Only consider cycles with more than 2 nodes
guard let firstCycle = cycles.first, firstCycle.count > 2 else {
// No problematic cycles detected, reset state
if detectedCycle != nil {
detectedCycle = nil
previousCycleSignature = nil
hasPromptedForCurrentCycle = false
}
return
}
// Create a signature for this cycle to detect if it changed
let cycleSignature = firstCycle.sorted().joined(separator: ",")
// If this is a new/different cycle, reset the prompt state
if cycleSignature != previousCycleSignature {
previousCycleSignature = cycleSignature
hasPromptedForCurrentCycle = false
}
detectedCycle = firstCycle
// Only prompt once per cycle
if !hasPromptedForCurrentCycle {
showDisableBridgePrompt(nodeIds: firstCycle)
}
}
private func showDisableBridgePrompt(nodeIds: [String]) {
hasPromptedForCurrentCycle = true
// Get friendly names for the nodes if available
let nodeNames = nodeIds.map { nodeId -> String in
if let snapshot = clusterStateService?.latestSnapshot,
let profile = snapshot.nodeProfiles[nodeId],
let friendlyName = profile.friendlyName, !friendlyName.isEmpty
{
return friendlyName
}
return String(nodeId.prefix(8)) // Use first 8 chars of node ID as fallback
}
let machineNames = nodeNames.joined(separator: ", ")
let alert = NSAlert()
alert.messageText = "Thunderbolt Bridge Loop Detected"
alert.informativeText = """
A Thunderbolt Bridge loop has been detected between \(nodeNames.count) machines: \(machineNames).
This can cause network packet storms and connectivity issues. Would you like to disable Thunderbolt Bridge on this machine to break the loop?
"""
alert.alertStyle = .warning
alert.addButton(withTitle: "Disable Bridge")
alert.addButton(withTitle: "Not Now")
let response = alert.runModal()
if response == .alertFirstButtonReturn {
Task {
await disableThunderboltBridge()
}
}
}
func disableThunderboltBridge() async {
Self.logger.info("Attempting to disable Thunderbolt Bridge via SCPreferences")
lastError = nil
do {
try await disableThunderboltBridgeWithSCPreferences()
Self.logger.info("Successfully disabled Thunderbolt Bridge")
} catch {
Self.logger.error(
"Failed to disable Thunderbolt Bridge: \(error.localizedDescription, privacy: .public)"
)
lastError = error.localizedDescription
showErrorAlert(message: error.localizedDescription)
}
}
private func disableThunderboltBridgeWithSCPreferences() async throws {
// 1. Create authorization reference
var authRef: AuthorizationRef?
var status = AuthorizationCreate(nil, nil, [], &authRef)
guard status == errAuthorizationSuccess, let authRef = authRef else {
throw ThunderboltBridgeError.authorizationFailed
}
defer { AuthorizationFree(authRef, [.destroyRights]) }
// 2. Request specific network configuration rights
let rightName = "system.services.systemconfiguration.network"
status = rightName.withCString { nameCString in
var item = AuthorizationItem(
name: nameCString,
valueLength: 0,
value: nil,
flags: 0
)
return withUnsafeMutablePointer(to: &item) { itemPointer in
var rights = AuthorizationRights(count: 1, items: itemPointer)
return AuthorizationCopyRights(
authRef,
&rights,
nil,
[.extendRights, .interactionAllowed],
nil
)
}
}
guard status == errAuthorizationSuccess else {
if status == errAuthorizationCanceled {
throw ThunderboltBridgeError.authorizationCanceled
}
throw ThunderboltBridgeError.authorizationDenied
}
// 3. Create SCPreferences with authorization
guard
let prefs = SCPreferencesCreateWithAuthorization(
kCFAllocatorDefault,
"EXO" as CFString,
nil,
authRef
)
else {
throw ThunderboltBridgeError.preferencesCreationFailed
}
// 4. Lock, modify, commit
guard SCPreferencesLock(prefs, true) else {
throw ThunderboltBridgeError.lockFailed
}
defer {
SCPreferencesUnlock(prefs)
}
// 5. Find the Thunderbolt Bridge service dynamically (don't assume the name)
guard let targetServiceName = ThunderboltBridgeDetector.findThunderboltBridgeServiceName()
else {
throw ThunderboltBridgeError.serviceNotFound
}
guard let allServices = SCNetworkServiceCopyAll(prefs) as? [SCNetworkService] else {
throw ThunderboltBridgeError.servicesNotFound
}
var found = false
for service in allServices {
if let name = SCNetworkServiceGetName(service) as String?,
name == targetServiceName
{
guard SCNetworkServiceSetEnabled(service, false) else {
throw ThunderboltBridgeError.disableFailed
}
found = true
Self.logger.info(
"Found and disabled Thunderbolt Bridge service: '\(targetServiceName)'")
break
}
}
if !found {
throw ThunderboltBridgeError.serviceNotFound
}
// 6. Commit and apply
guard SCPreferencesCommitChanges(prefs) else {
throw ThunderboltBridgeError.commitFailed
}
guard SCPreferencesApplyChanges(prefs) else {
throw ThunderboltBridgeError.applyFailed
}
}
private func showErrorAlert(message: String) {
let alert = NSAlert()
alert.messageText = "Failed to Disable Thunderbolt Bridge"
alert.informativeText = message
alert.alertStyle = .critical
alert.addButton(withTitle: "OK")
alert.runModal()
}
}
enum ThunderboltBridgeError: LocalizedError {
case authorizationFailed
case authorizationCanceled
case authorizationDenied
case preferencesCreationFailed
case lockFailed
case servicesNotFound
case serviceNotFound
case disableFailed
case commitFailed
case applyFailed
var errorDescription: String? {
switch self {
case .authorizationFailed:
return "Failed to create authorization"
case .authorizationCanceled:
return "Authorization was canceled by user"
case .authorizationDenied:
return "Authorization was denied"
case .preferencesCreationFailed:
return "Failed to access network preferences"
case .lockFailed:
return "Failed to lock network preferences for modification"
case .servicesNotFound:
return "Could not retrieve network services"
case .serviceNotFound:
return "Thunderbolt Bridge service not found"
case .disableFailed:
return "Failed to disable Thunderbolt Bridge service"
case .commitFailed:
return "Failed to save network configuration changes"
case .applyFailed:
return "Failed to apply network configuration changes"
}
}
}
@@ -216,7 +216,7 @@ struct InstanceTaskViewModel: Identifiable, Equatable {
let promptPreview: String?
let errorMessage: String?
let subtitle: String?
let parameters: ChatCompletionTaskParameters?
let parameters: TextGenerationTaskParameters?
var title: String {
switch kind {
+4 -4
View File
@@ -86,7 +86,7 @@ struct TopologyViewModel {
extension ClusterState {
func topologyViewModel(localNodeId: String?) -> TopologyViewModel? {
let topologyNodeIds = Set(topology?.nodes.map(\.nodeId) ?? [])
let topologyNodeIds = Set(topology?.nodes ?? [])
let allNodes = nodeViewModels().filter {
topologyNodeIds.isEmpty || topologyNodeIds.contains($0.id)
}
@@ -95,8 +95,8 @@ extension ClusterState {
let nodesById = Dictionary(uniqueKeysWithValues: allNodes.map { ($0.id, $0) })
var orderedNodes: [NodeViewModel] = []
if let topologyNodes = topology?.nodes {
for topoNode in topologyNodes {
if let viewModel = nodesById[topoNode.nodeId] {
for nodeId in topologyNodes {
if let viewModel = nodesById[nodeId] {
orderedNodes.append(viewModel)
}
}
@@ -116,7 +116,7 @@ extension ClusterState {
let nodeIds = Set(orderedNodes.map(\.id))
let edgesArray: [TopologyEdgeViewModel] =
topology?.connections?.compactMap { connection in
topology?.connections.compactMap { connection in
guard nodeIds.contains(connection.localNodeId),
nodeIds.contains(connection.sendBackNodeId)
else { return nil }
+85
View File
@@ -0,0 +1,85 @@
//
// main.swift
// EXO
//
// Created by Jake Hillion on 2026-02-03.
//
import Foundation
/// Command line options for the EXO app
enum CLICommand {
case install
case uninstall
case help
case none
}
/// Parse command line arguments to determine the CLI command
func parseArguments() -> CLICommand {
let args = CommandLine.arguments
if args.contains("--help") || args.contains("-h") {
return .help
}
if args.contains("--install") {
return .install
}
if args.contains("--uninstall") {
return .uninstall
}
return .none
}
/// Print usage information
func printUsage() {
let programName = (CommandLine.arguments.first as NSString?)?.lastPathComponent ?? "EXO"
print(
"""
Usage: \(programName) [OPTIONS]
Options:
--install Install EXO network configuration (requires root)
--uninstall Uninstall EXO network configuration (requires root)
--help, -h Show this help message
When run without options, starts the normal GUI application.
Examples:
sudo \(programName) --install Install network components as root
sudo \(programName) --uninstall Remove network components as root
""")
}
/// Check if running as root
func isRunningAsRoot() -> Bool {
return getuid() == 0
}
// Main entry point
let command = parseArguments()
switch command {
case .help:
printUsage()
exit(0)
case .install:
if !isRunningAsRoot() {
fputs("Error: --install requires root privileges. Run with sudo.\n", stderr)
exit(1)
}
let success = NetworkSetupHelper.installDirectly()
exit(success ? 0 : 1)
case .uninstall:
if !isRunningAsRoot() {
fputs("Error: --uninstall requires root privileges. Run with sudo.\n", stderr)
exit(1)
}
let success = NetworkSetupHelper.uninstallDirectly()
exit(success ? 0 : 1)
case .none:
// Start normal GUI application
EXOApp.main()
}
+38 -39
View File
@@ -29,21 +29,21 @@ YELLOW='\033[1;33m'
NC='\033[0m' # No Color
echo_info() {
echo -e "${GREEN}[INFO]${NC} $1"
echo -e "${GREEN}[INFO]${NC} $1"
}
echo_warn() {
echo -e "${YELLOW}[WARN]${NC} $1"
echo -e "${YELLOW}[WARN]${NC} $1"
}
echo_error() {
echo -e "${RED}[ERROR]${NC} $1"
echo -e "${RED}[ERROR]${NC} $1"
}
# Check if running as root
if [[ $EUID -ne 0 ]]; then
echo_error "This script must be run as root (use sudo)"
exit 1
echo_error "This script must be run as root (use sudo)"
exit 1
fi
echo ""
@@ -55,64 +55,64 @@ echo ""
# Unload the LaunchDaemon if running
echo_info "Stopping network setup daemon..."
if launchctl list | grep -q "$LABEL"; then
launchctl bootout system/"$LABEL" 2>/dev/null || true
echo_info "Daemon stopped"
launchctl bootout system/"$LABEL" 2>/dev/null || true
echo_info "Daemon stopped"
else
echo_warn "Daemon was not running"
echo_warn "Daemon was not running"
fi
# Remove LaunchDaemon plist
if [[ -f "$PLIST_DEST" ]]; then
rm -f "$PLIST_DEST"
echo_info "Removed LaunchDaemon plist"
if [[ -f $PLIST_DEST ]]; then
rm -f "$PLIST_DEST"
echo_info "Removed LaunchDaemon plist"
else
echo_warn "LaunchDaemon plist not found (already removed?)"
echo_warn "LaunchDaemon plist not found (already removed?)"
fi
# Remove the script and parent directory
if [[ -f "$SCRIPT_DEST" ]]; then
rm -f "$SCRIPT_DEST"
echo_info "Removed network setup script"
if [[ -f $SCRIPT_DEST ]]; then
rm -f "$SCRIPT_DEST"
echo_info "Removed network setup script"
else
echo_warn "Network setup script not found (already removed?)"
echo_warn "Network setup script not found (already removed?)"
fi
# Remove EXO directory if empty
if [[ -d "/Library/Application Support/EXO" ]]; then
rmdir "/Library/Application Support/EXO" 2>/dev/null && \
echo_info "Removed EXO support directory" || \
echo_warn "EXO support directory not empty, leaving in place"
rmdir "/Library/Application Support/EXO" 2>/dev/null &&
echo_info "Removed EXO support directory" ||
echo_warn "EXO support directory not empty, leaving in place"
fi
# Remove log files
if [[ -f "$LOG_OUT" ]] || [[ -f "$LOG_ERR" ]]; then
rm -f "$LOG_OUT" "$LOG_ERR"
echo_info "Removed log files"
if [[ -f $LOG_OUT ]] || [[ -f $LOG_ERR ]]; then
rm -f "$LOG_OUT" "$LOG_ERR"
echo_info "Removed log files"
else
echo_warn "Log files not found (already removed?)"
echo_warn "Log files not found (already removed?)"
fi
# Switch back to Automatic network location
echo_info "Restoring network configuration..."
if networksetup -listlocations | grep -q "^Automatic$"; then
networksetup -switchtolocation Automatic 2>/dev/null || true
echo_info "Switched to Automatic network location"
networksetup -switchtolocation Automatic 2>/dev/null || true
echo_info "Switched to Automatic network location"
else
echo_warn "Automatic network location not found"
echo_warn "Automatic network location not found"
fi
# Delete the exo network location if it exists
if networksetup -listlocations | grep -q "^exo$"; then
networksetup -deletelocation exo 2>/dev/null || true
echo_info "Deleted 'exo' network location"
networksetup -deletelocation exo 2>/dev/null || true
echo_info "Deleted 'exo' network location"
else
echo_warn "'exo' network location not found (already removed?)"
echo_warn "'exo' network location not found (already removed?)"
fi
# Re-enable Thunderbolt Bridge if it exists
if networksetup -listnetworkservices 2>/dev/null | grep -q "Thunderbolt Bridge"; then
networksetup -setnetworkserviceenabled "Thunderbolt Bridge" on 2>/dev/null || true
echo_info "Re-enabled Thunderbolt Bridge"
networksetup -setnetworkserviceenabled "Thunderbolt Bridge" on 2>/dev/null || true
echo_info "Re-enabled Thunderbolt Bridge"
fi
# Note about launch at login registration
@@ -124,14 +124,14 @@ echo_warn " System Settings → General → Login Items → Remove EXO"
# Check if EXO.app exists in common locations
APP_FOUND=false
for app_path in "/Applications/EXO.app" "$HOME/Applications/EXO.app"; do
if [[ -d "$app_path" ]]; then
if [[ "$APP_FOUND" == false ]]; then
echo ""
APP_FOUND=true
fi
echo_warn "EXO.app found at: $app_path"
echo_warn "You may want to move it to Trash manually."
if [[ -d $app_path ]]; then
if [[ $APP_FOUND == false ]]; then
echo ""
APP_FOUND=true
fi
echo_warn "EXO.app found at: $app_path"
echo_warn "You may want to move it to Trash manually."
fi
done
echo ""
@@ -151,4 +151,3 @@ echo ""
echo "Manual step required:"
echo " Remove EXO from Login Items in System Settings → General → Login Items"
echo ""
+265 -114
View File
@@ -5,10 +5,13 @@ from __future__ import annotations
import argparse
import contextlib
import http.client
import itertools
import json
import os
import sys
import time
from collections.abc import Callable
from pathlib import Path
from statistics import mean
from typing import Any
from urllib.parse import urlencode
@@ -16,6 +19,89 @@ from urllib.parse import urlencode
from loguru import logger
from transformers import AutoTokenizer
# Backoff constants for cluster settling retry
_SETTLE_INITIAL_BACKOFF_S = 1.0
_SETTLE_MAX_BACKOFF_S = 60.0
_SETTLE_BACKOFF_MULTIPLIER = 2.0
# Monkey-patch for transformers 5.x compatibility
# Kimi's tokenization_kimi.py imports bytes_to_unicode from the old location
# which was moved in transformers 5.0.0rc2
try:
import transformers.models.gpt2.tokenization_gpt2 as gpt2_tokenization
from transformers.convert_slow_tokenizer import bytes_to_unicode
if not hasattr(gpt2_tokenization, "bytes_to_unicode"):
gpt2_tokenization.bytes_to_unicode = bytes_to_unicode # type: ignore[attr-defined]
except ImportError:
pass # transformers < 5.0 or bytes_to_unicode not available
def load_tokenizer_for_bench(model_id: str) -> Any:
"""
Load tokenizer for benchmarking, with special handling for Kimi models.
Kimi uses a custom TikTokenTokenizer that transformers 5.x can't load via AutoTokenizer.
This function replicates the logic from utils_mlx.py for bench compatibility.
"""
model_id_lower = model_id.lower()
if "kimi-k2" in model_id_lower:
import importlib.util
import types
from huggingface_hub import snapshot_download
# Download/get the model path
model_path = Path(
snapshot_download(
model_id,
allow_patterns=["*.json", "*.py", "*.tiktoken"],
)
)
sys.path.insert(0, str(model_path))
# Load tool_declaration_ts first (tokenization_kimi imports it with relative import)
tool_decl_path = model_path / "tool_declaration_ts.py"
if tool_decl_path.exists():
spec = importlib.util.spec_from_file_location(
"tool_declaration_ts", tool_decl_path
)
if spec and spec.loader:
tool_decl_module = importlib.util.module_from_spec(spec)
sys.modules["tool_declaration_ts"] = tool_decl_module
spec.loader.exec_module(tool_decl_module)
# Load tokenization_kimi with patched source (convert relative to absolute import)
tok_path = model_path / "tokenization_kimi.py"
source = tok_path.read_text()
source = source.replace("from .tool_declaration_ts", "from tool_declaration_ts")
spec = importlib.util.spec_from_file_location("tokenization_kimi", tok_path)
if spec:
tok_module = types.ModuleType("tokenization_kimi")
tok_module.__file__ = str(tok_path)
sys.modules["tokenization_kimi"] = tok_module
exec(compile(source, tok_path, "exec"), tok_module.__dict__) # noqa: S102
TikTokenTokenizer = tok_module.TikTokenTokenizer # noqa: N806
else:
from tokenization_kimi import TikTokenTokenizer # type: ignore[import-not-found] # noqa: I001
hf_tokenizer: Any = TikTokenTokenizer.from_pretrained(model_path)
# Patch encode to use internal tiktoken model directly
# transformers 5.x has a bug in the encode->pad path for slow tokenizers
def _patched_encode(text: str, **kwargs: object) -> list[int]:
# Pass allowed_special="all" to handle special tokens like <|im_user|>
return list(hf_tokenizer.model.encode(text, allowed_special="all"))
hf_tokenizer.encode = _patched_encode
return hf_tokenizer
# Default: use AutoTokenizer
return AutoTokenizer.from_pretrained(model_id, trust_remote_code=True)
class ExoHttpError(RuntimeError):
def __init__(self, status: int, reason: str, body_preview: str):
@@ -24,7 +110,7 @@ class ExoHttpError(RuntimeError):
class ExoClient:
def __init__(self, host: str, port: int, timeout_s: float = 600.0):
def __init__(self, host: str, port: int, timeout_s: float = 7200.0):
self.host = host
self.port = port
self.timeout_s = timeout_s
@@ -180,14 +266,7 @@ def parse_int_list(values: list[str]) -> list[int]:
part = part.strip()
if part:
items.append(int(part))
seen: set[int] = set()
out: list[int] = []
for x in items:
if x not in seen:
out.append(x)
seen.add(x)
return out
return items
def resolve_model_short_id(client: ExoClient, model_arg: str) -> tuple[str, str]:
@@ -240,7 +319,11 @@ def run_one_completion(
stats = out.get("generation_stats")
preview = (out.get("choices") or [{}])[0]["message"]["content"][:200]
# Extract preview, handling None content (common for thinking models)
choices = out.get("choices") or [{}]
message = choices[0].get("message", {}) if choices else {}
content = message.get("content") or ""
preview = content[:200] if content else ""
return {
"elapsed_s": elapsed,
@@ -277,12 +360,29 @@ class PromptSizer:
f"Target ({target}) is smaller than template overhead ({self.base_tokens})."
)
content = ""
tok = self.count_fn(content)
# Estimate tokens per atom using a sample
sample_count = 100
sample_content = self.atom * sample_count
sample_tokens = self.count_fn(sample_content) - self.base_tokens
tokens_per_atom = sample_tokens / sample_count
while tok < target:
content += self.atom
tok = self.count_fn(content)
# Estimate starting point
needed_tokens = target - self.base_tokens
estimated_atoms = int(needed_tokens / tokens_per_atom)
# Binary search to find exact atom count
low, high = 0, estimated_atoms * 2 + 100
while low < high:
mid = (low + high) // 2
tok = self.count_fn(self.atom * mid)
if tok < target:
low = mid + 1
else:
high = mid
content = self.atom * low
tok = self.count_fn(content)
logger.info(f"{tok=}")
if tok != target:
raise RuntimeError(
@@ -293,6 +393,66 @@ class PromptSizer:
return content, tok
def fetch_and_filter_placements(
client: ExoClient, full_model_id: str, args: argparse.Namespace
) -> list[dict[str, Any]]:
previews_resp = client.request_json(
"GET", "/instance/previews", params={"model_id": full_model_id}
)
previews = previews_resp.get("previews") or []
selected: list[dict[str, Any]] = []
for p in previews:
if p.get("error") is not None:
continue
if not placement_filter(str(p.get("instance_meta", "")), args.instance_meta):
continue
if not sharding_filter(str(p.get("sharding", "")), args.sharding):
continue
instance = p.get("instance")
if not isinstance(instance, dict):
continue
n = nodes_used_in_instance(instance)
# Skip tensor ring single node as it is pointless when pipeline ring
if n == 1 and (
(args.sharding == "both" and "tensor" in p.get("sharding", "").lower())
or (
args.instance_meta == "both"
and "jaccl" in p.get("instance_meta", "").lower()
)
):
continue
if (
args.skip_pipeline_jaccl
and (
args.instance_meta == "both"
and "jaccl" in p.get("instance_meta", "").lower()
)
and (
args.sharding == "both" and "pipeline" in p.get("sharding", "").lower()
)
):
continue
if (
args.skip_tensor_ring
and (
args.instance_meta == "both"
and "ring" in p.get("instance_meta", "").lower()
)
and (args.sharding == "both" and "tensor" in p.get("sharding", "").lower())
):
continue
if args.min_nodes <= n <= args.max_nodes:
selected.append(p)
return selected
def main() -> int:
ap = argparse.ArgumentParser(
prog="exo-bench",
@@ -336,7 +496,12 @@ def main() -> int:
ap.add_argument(
"--skip-pipeline-jaccl",
action="store_true",
help="Pipeline jaccl is often pointless, skip by default",
help="Skip pipeline+jaccl placements, as it's often pointless.",
)
ap.add_argument(
"--skip-tensor-ring",
action="store_true",
help="Skip tensor+ring placements, as it's so slow.",
)
ap.add_argument(
"--repeat", type=int, default=1, help="Repetitions per (pp,tg) pair."
@@ -348,16 +513,28 @@ def main() -> int:
help="Warmup runs per placement (uses first pp/tg).",
)
ap.add_argument(
"--timeout", type=float, default=600.0, help="HTTP timeout (seconds)."
"--timeout", type=float, default=7200.0, help="HTTP timeout (seconds)."
)
ap.add_argument(
"--json-out",
default="bench/results.json",
help="Write raw per-run results JSON to this path.",
)
ap.add_argument("--stdout", action="store_true", help="Write results to stdout")
ap.add_argument(
"--dry-run", action="store_true", help="List selected placements and exit."
)
ap.add_argument(
"--all-combinations",
action="store_true",
help="Force all pp×tg combinations (cartesian product) even when lists have equal length.",
)
ap.add_argument(
"--settle-timeout",
type=float,
default=0,
help="Max seconds to wait for the cluster to produce valid placements (0 = try once).",
)
args = ap.parse_args()
pp_list = parse_int_list(args.pp)
@@ -369,18 +546,19 @@ def main() -> int:
logger.error("--repeat must be >= 1")
return 2
# Log pairing mode
use_combinations = args.all_combinations or len(pp_list) != len(tg_list)
if use_combinations:
logger.info(
f"pp/tg mode: combinations (product) - {len(pp_list) * len(tg_list)} pairs"
)
else:
logger.info(f"pp/tg mode: tandem (zip) - {len(pp_list)} pairs")
client = ExoClient(args.host, args.port, timeout_s=args.timeout)
short_id, full_model_id = resolve_model_short_id(client, args.model)
previews_resp = client.request_json(
"GET", "/instance/previews", params={"model_id": full_model_id}
)
previews = previews_resp.get("previews") or []
tokenizer = AutoTokenizer.from_pretrained(
full_model_id,
trust_remote_code=True,
)
tokenizer = load_tokenizer_for_bench(full_model_id)
if tokenizer is None:
raise RuntimeError("[exo-bench] tokenizer load failed")
@@ -391,44 +569,20 @@ def main() -> int:
logger.error("[exo-bench] tokenizer usable but prompt sizing failed")
raise
selected: list[dict[str, Any]] = []
for p in previews:
if p.get("error") is not None:
continue
if not placement_filter(str(p.get("instance_meta", "")), args.instance_meta):
continue
if not sharding_filter(str(p.get("sharding", "")), args.sharding):
continue
selected = fetch_and_filter_placements(client, full_model_id, args)
instance = p.get("instance")
if not isinstance(instance, dict):
continue
n = nodes_used_in_instance(instance)
# Skip tensor ring single node as it is pointless when pipeline ring
if n == 1 and (
(args.sharding == "both" and "tensor" in p.get("sharding", "").lower())
or (
args.instance_meta == "both"
and "jaccl" in p.get("instance_meta", "").lower()
if not selected and args.settle_timeout > 0:
backoff = _SETTLE_INITIAL_BACKOFF_S
deadline = time.monotonic() + args.settle_timeout
while not selected and time.monotonic() < deadline:
remaining = deadline - time.monotonic()
logger.warning(
f"No valid placements yet (cluster may still be settling). "
f"Retrying in {backoff:.1f}s ({remaining:.0f}s remaining)..."
)
):
continue
if (
args.skip_pipeline_jaccl
and (
args.instance_meta == "both"
and "jaccl" in p.get("instance_meta", "").lower()
)
and (
args.sharding == "both" and "pipeline" in p.get("sharding", "").lower()
)
):
continue
if args.min_nodes <= n <= args.max_nodes:
selected.append(p)
time.sleep(min(backoff, remaining))
backoff = min(backoff * _SETTLE_BACKOFF_MULTIPLIER, _SETTLE_MAX_BACKOFF_S)
selected = fetch_and_filter_placements(client, full_model_id, args)
if not selected:
logger.error("No valid placements matched your filters.")
@@ -486,60 +640,55 @@ def main() -> int:
)
logger.debug(f" warmup {i + 1}/{args.warmup} done")
for pp in pp_list:
# if (
# pp * n_nodes > 2048
# and "ring" in instance_meta.lower()
# and "tensor" in sharding.lower()
# ):
# model_card = MODEL_CARDS[short_id]
# if model_card.metadata.storage_size > Memory.from_gb(10):
# logger.info(
# f"Skipping tensor ring as this is too slow for model of size {model_card.metadata.storage_size} on {n_nodes=}"
# )
# continue
for tg in tg_list:
runs: list[dict[str, Any]] = []
for r in range(args.repeat):
time.sleep(3)
try:
row, actual_pp_tokens = run_one_completion(
client, full_model_id, pp, tg, prompt_sizer
)
except Exception as e:
logger.error(e)
continue
row.update(
{
"model_short_id": short_id,
"model_id": full_model_id,
"placement_sharding": sharding,
"placement_instance_meta": instance_meta,
"placement_nodes": n_nodes,
"instance_id": instance_id,
"pp_tokens": actual_pp_tokens,
"tg": tg,
"repeat_index": r,
}
)
runs.append(row)
all_rows.append(row)
# If pp and tg lists have same length, run in tandem (zip)
# Otherwise (or if --all-combinations), run all combinations (cartesian product)
if use_combinations:
pp_tg_pairs = list(itertools.product(pp_list, tg_list))
else:
pp_tg_pairs = list(zip(pp_list, tg_list, strict=True))
if runs:
prompt_tps = mean(x["stats"]["prompt_tps"] for x in runs)
gen_tps = mean(x["stats"]["generation_tps"] for x in runs)
ptok = mean(x["stats"]["prompt_tokens"] for x in runs)
gtok = mean(x["stats"]["generation_tokens"] for x in runs)
peak = mean(
x["stats"]["peak_memory_usage"]["inBytes"] for x in runs
for pp, tg in pp_tg_pairs:
runs: list[dict[str, Any]] = []
for r in range(args.repeat):
time.sleep(3)
try:
row, actual_pp_tokens = run_one_completion(
client, full_model_id, pp, tg, prompt_sizer
)
except Exception as e:
logger.error(e)
continue
row.update(
{
"model_short_id": short_id,
"model_id": full_model_id,
"placement_sharding": sharding,
"placement_instance_meta": instance_meta,
"placement_nodes": n_nodes,
"instance_id": instance_id,
"pp_tokens": actual_pp_tokens,
"tg": tg,
"repeat_index": r,
}
)
runs.append(row)
all_rows.append(row)
logger.info(
f"prompt_tps={prompt_tps:.2f} gen_tps={gen_tps:.2f} "
f"prompt_tokens={ptok} gen_tokens={gtok} "
f"peak_memory={format_peak_memory(peak)}\n"
)
time.sleep(2)
if runs:
prompt_tps = mean(x["stats"]["prompt_tps"] for x in runs)
gen_tps = mean(x["stats"]["generation_tps"] for x in runs)
ptok = mean(x["stats"]["prompt_tokens"] for x in runs)
gtok = mean(x["stats"]["generation_tokens"] for x in runs)
peak = mean(
x["stats"]["peak_memory_usage"]["inBytes"] for x in runs
)
logger.info(
f"prompt_tps={prompt_tps:.2f} gen_tps={gen_tps:.2f} "
f"prompt_tokens={ptok} gen_tokens={gtok} "
f"peak_memory={format_peak_memory(peak)}\n"
)
time.sleep(2)
finally:
try:
client.request_json("DELETE", f"/instance/{instance_id}")
@@ -551,7 +700,9 @@ def main() -> int:
time.sleep(5)
if args.json_out:
if args.stdout:
json.dump(all_rows, sys.stdout, indent=2, ensure_ascii=False)
elif args.json_out:
with open(args.json_out, "w", encoding="utf-8") as f:
json.dump(all_rows, f, indent=2, ensure_ascii=False)
logger.debug(f"\nWrote results JSON: {args.json_out}")
+16
View File
@@ -0,0 +1,16 @@
[project]
name = "exo-bench"
version = "0.1.0"
description = "Benchmarking tool for exo distributed inference"
requires-python = ">=3.13"
dependencies = [
"loguru>=0.7.3",
"transformers>=5.0.0",
"huggingface-hub>=0.33.4",
"tiktoken>=0.12.0",
"jinja2>=3.1.0",
]
[build-system]
requires = ["hatchling"]
build-backend = "hatchling.build"
View File
+1
View File
@@ -0,0 +1 @@
collect_ignore = ["tests/start_distributed_test.py"]
+59 -3
View File
@@ -3,6 +3,61 @@
perSystem =
{ pkgs, lib, ... }:
let
# Filter source to ONLY include package.json and package-lock.json
# This ensures prettier-svelte only rebuilds when lockfiles change
dashboardLockfileSrc = lib.cleanSourceWith {
src = inputs.self;
filter =
path: type:
let
baseName = builtins.baseNameOf path;
isDashboardDir = baseName == "dashboard" && type == "directory";
isPackageFile =
(lib.hasInfix "/dashboard/" path || lib.hasSuffix "/dashboard" (builtins.dirOf path))
&& (baseName == "package.json" || baseName == "package-lock.json");
in
isDashboardDir || isPackageFile;
};
# Stub source with lockfiles and minimal files for build to succeed
# This allows prettier-svelte to avoid rebuilding when dashboard source changes
dashboardStubSrc = pkgs.runCommand "dashboard-stub-src" { } ''
mkdir -p $out
cp ${dashboardLockfileSrc}/dashboard/package.json $out/
cp ${dashboardLockfileSrc}/dashboard/package-lock.json $out/
# Minimal files so vite build succeeds (produces empty output)
echo '<!DOCTYPE html><html><head></head><body></body></html>' > $out/index.html
mkdir -p $out/src
touch $out/src/app.html
'';
# Deps-only build using stub source (for prettier-svelte)
# Only rebuilds when package.json or package-lock.json change
dashboardDeps = inputs.dream2nix.lib.evalModules {
packageSets.nixpkgs = pkgs;
modules = [
./dashboard.nix
{
paths.projectRoot = inputs.self;
paths.projectRootFile = "flake.nix";
paths.package = inputs.self + "/dashboard";
}
{
deps.dashboardSrc = lib.mkForce dashboardStubSrc;
}
# Override build phases to skip the actual build - just need node_modules
{
mkDerivation = {
buildPhase = lib.mkForce "true";
installPhase = lib.mkForce ''
runHook preInstall
runHook postInstall
'';
};
}
];
};
# Filter source to only include dashboard directory
dashboardSrc = lib.cleanSourceWith {
src = inputs.self;
@@ -42,11 +97,12 @@
'';
# Prettier with svelte plugin for treefmt
# Uses dashboardDeps instead of dashboardFull to avoid rebuilding on source changes
packages.prettier-svelte = pkgs.writeShellScriptBin "prettier-svelte" ''
export NODE_PATH="${dashboardFull}/lib/node_modules/exo-dashboard/node_modules"
export NODE_PATH="${dashboardDeps}/lib/node_modules/exo-dashboard/node_modules"
exec ${pkgs.nodejs}/bin/node \
${dashboardFull}/lib/node_modules/exo-dashboard/node_modules/prettier/bin/prettier.cjs \
--plugin "${dashboardFull}/lib/node_modules/exo-dashboard/node_modules/prettier-plugin-svelte/plugin.js" \
${dashboardDeps}/lib/node_modules/exo-dashboard/node_modules/prettier/bin/prettier.cjs \
--plugin "${dashboardDeps}/lib/node_modules/exo-dashboard/node_modules/prettier-plugin-svelte/plugin.js" \
"$@"
'';
};
+67 -4
View File
@@ -12,6 +12,8 @@
ttftMs,
tps,
totalTokens,
thinkingEnabled as thinkingEnabledStore,
setConversationThinking,
} from "$lib/stores/app.svelte";
import ChatAttachments from "./ChatAttachments.svelte";
import ImageParamsPanel from "./ImageParamsPanel.svelte";
@@ -25,6 +27,7 @@
autofocus?: boolean;
showModelSelector?: boolean;
modelTasks?: Record<string, string[]>;
modelCapabilities?: Record<string, string[]>;
}
let {
@@ -34,6 +37,7 @@
autofocus = true,
showModelSelector = false,
modelTasks = {},
modelCapabilities = {},
}: Props = $props();
let message = $state("");
@@ -41,6 +45,7 @@
let fileInputRef: HTMLInputElement | undefined = $state();
let uploadedFiles = $state<ChatUploadedFile[]>([]);
let isDragOver = $state(false);
const thinkingEnabled = $derived(thinkingEnabledStore());
let loading = $derived(isLoading());
const currentModel = $derived(selectedChatModel());
const instanceData = $derived(instances());
@@ -89,7 +94,16 @@
const isImageModel = $derived(() => {
if (!currentModel) return false;
return modelSupportsTextToImage(currentModel);
return (
modelSupportsTextToImage(currentModel) ||
modelSupportsImageEditing(currentModel)
);
});
const modelSupportsThinking = $derived(() => {
if (!currentModel) return false;
const caps = modelCapabilities[currentModel] || [];
return caps.includes("thinking") && caps.includes("text");
});
const isEditOnlyWithoutImage = $derived(
@@ -279,7 +293,11 @@
// Use image generation for text-to-image models
generateImage(content);
} else {
sendMessage(content, files);
sendMessage(
content,
files,
modelSupportsThinking() ? thinkingEnabled : null,
);
}
// Refocus the textarea after sending
@@ -517,6 +535,35 @@
</div>
{/if}
</div>
<!-- Thinking toggle -->
{#if modelSupportsThinking()}
<button
type="button"
onclick={() => setConversationThinking(!thinkingEnabled)}
class="flex items-center gap-1.5 px-2 py-1 rounded text-xs font-mono tracking-wide transition-all duration-200 flex-shrink-0 cursor-pointer border {thinkingEnabled
? 'bg-exo-yellow/15 border-exo-yellow/40 text-exo-yellow'
: 'bg-exo-medium-gray/30 border-exo-medium-gray/50 text-exo-light-gray/60 hover:text-exo-light-gray'}"
title={thinkingEnabled
? "Thinking enabled — click to disable"
: "Thinking disabled — click to enable"}
>
<svg
class="w-3.5 h-3.5"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
>
<path
d="M12 2a7 7 0 0 0-7 7c0 2.38 1.19 4.47 3 5.74V17a1 1 0 0 0 1 1h6a1 1 0 0 0 1-1v-2.26c1.81-1.27 3-3.36 3-5.74a7 7 0 0 0-7-7zM9 20h6M10 22h4"
stroke-linecap="round"
stroke-linejoin="round"
/>
</svg>
<span>{thinkingEnabled ? "THINK" : "NO THINK"}</span>
</button>
{/if}
<!-- Performance stats -->
{#if currentTtft !== null || currentTps !== null}
<div class="flex items-center gap-4 text-xs font-mono flex-shrink-0">
@@ -596,9 +643,8 @@
: isImageModel()
? "Describe the image you want to generate..."
: placeholder}
disabled={loading}
rows={1}
class="flex-1 resize-none bg-transparent text-foreground placeholder:text-exo-light-gray/60 placeholder:text-sm placeholder:tracking-[0.15em] placeholder:leading-7 focus:outline-none focus:ring-0 focus:border-none disabled:opacity-50 text-sm leading-7 font-mono"
class="flex-1 resize-none bg-transparent text-foreground placeholder:text-exo-light-gray/60 placeholder:text-sm placeholder:tracking-[0.15em] placeholder:leading-7 focus:outline-none focus:ring-0 focus:border-none text-sm leading-7 font-mono"
style="min-height: 28px; max-height: 150px;"
></textarea>
@@ -646,6 +692,23 @@
</svg>
<span>EDIT</span>
</span>
{:else if isEditOnlyWithoutImage}
<span class="inline-flex items-center gap-1.5">
<svg
class="w-3.5 h-3.5"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
stroke-width="2"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
d="M11 5H6a2 2 0 00-2 2v11a2 2 0 002 2h11a2 2 0 002-2v-5m-1.414-9.414a2 2 0 112.828 2.828L11.828 15H9v-2.828l8.586-8.586z"
/>
</svg>
<span>EDIT</span>
</span>
{:else if isImageModel()}
<span class="inline-flex items-center gap-1.5">
<svg
@@ -6,11 +6,14 @@
deleteMessage,
editAndRegenerate,
regenerateLastResponse,
regenerateFromToken,
setEditingImage,
} from "$lib/stores/app.svelte";
import type { Message } from "$lib/stores/app.svelte";
import type { MessageAttachment } from "$lib/stores/app.svelte";
import MarkdownContent from "./MarkdownContent.svelte";
import TokenHeatmap from "./TokenHeatmap.svelte";
import ImageLightbox from "./ImageLightbox.svelte";
interface Props {
class?: string;
@@ -99,6 +102,26 @@
let copiedMessageId = $state<string | null>(null);
let expandedThinkingMessageIds = $state<Set<string>>(new Set());
// Lightbox state
let expandedImageSrc = $state<string | null>(null);
// Uncertainty heatmap toggle
let heatmapMessageIds = $state<Set<string>>(new Set());
function toggleHeatmap(messageId: string) {
const next = new Set(heatmapMessageIds);
if (next.has(messageId)) {
next.delete(messageId);
} else {
next.add(messageId);
}
heatmapMessageIds = next;
}
function isHeatmapVisible(messageId: string): boolean {
return heatmapMessageIds.has(messageId);
}
function formatTimestamp(timestamp: number): string {
return new Date(timestamp).toLocaleTimeString("en-US", {
hour12: false,
@@ -370,10 +393,15 @@
class="flex items-center gap-2 bg-exo-dark-gray/60 border border-exo-yellow/20 rounded px-2 py-1 text-xs font-mono"
>
{#if attachment.type === "image" && attachment.preview}
<!-- svelte-ignore a11y_no_noninteractive_element_interactions, a11y_click_events_have_key_events -->
<img
src={attachment.preview}
alt={attachment.name}
class="w-12 h-12 object-cover rounded border border-exo-yellow/20"
class="w-12 h-12 object-cover rounded border border-exo-yellow/20 cursor-pointer hover:border-exo-yellow/50 transition-colors"
onclick={() => {
if (attachment.preview)
expandedImageSrc = attachment.preview;
}}
/>
{:else}
<span>{getAttachmentIcon(attachment)}</span>
@@ -447,15 +475,44 @@
<div class="mb-3">
{#each message.attachments.filter((a) => a.type === "generated-image") as attachment}
<div class="relative group/img inline-block">
<!-- svelte-ignore a11y_no_noninteractive_element_interactions, a11y_click_events_have_key_events -->
<img
src={attachment.preview}
alt=""
class="max-w-full max-h-[512px] rounded-lg border border-exo-yellow/20 shadow-lg shadow-black/20"
class="max-w-full max-h-[512px] rounded-lg border border-exo-yellow/20 shadow-lg shadow-black/20 cursor-pointer"
onclick={() => {
if (attachment.preview)
expandedImageSrc = attachment.preview;
}}
/>
<!-- Button overlay -->
<div
class="absolute top-2 right-2 flex gap-1 opacity-0 group-hover/img:opacity-100 transition-opacity"
>
<!-- Expand button -->
<button
type="button"
class="p-2 rounded-lg bg-exo-dark-gray/80 border border-exo-yellow/30 text-exo-yellow hover:bg-exo-dark-gray hover:border-exo-yellow/50 cursor-pointer"
onclick={() => {
if (attachment.preview)
expandedImageSrc = attachment.preview;
}}
title="Expand image"
>
<svg
class="w-4 h-4"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
stroke-width="2"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
d="M4 8V4m0 0h4M4 4l5 5m11-1V4m0 0h-4m4 0l-5 5M4 16v4m0 0h4m-4 0l5-5m11 5l-5-5m5 5v-4m0 4h-4"
/>
</svg>
</button>
<!-- Edit button -->
<button
type="button"
@@ -548,13 +605,23 @@
>
</div>
{:else if message.content || (loading && !message.attachments?.some((a) => a.type === "generated-image"))}
<MarkdownContent
content={message.content || (loading ? response : "")}
/>
{#if loading && !message.content}
<span
class="inline-block w-2 h-4 bg-exo-yellow/70 ml-1 cursor-blink"
></span>
{#if isHeatmapVisible(message.id) && message.tokens && message.tokens.length > 0}
<TokenHeatmap
tokens={message.tokens}
isGenerating={loading &&
isLastAssistantMessage(message.id)}
onRegenerateFrom={(tokenIndex) =>
regenerateFromToken(message.id, tokenIndex)}
/>
{:else}
<MarkdownContent
content={message.content || (loading ? response : "")}
/>
{#if loading && !message.content}
<span
class="inline-block w-2 h-4 bg-exo-yellow/70 ml-1 cursor-blink"
></span>
{/if}
{/if}
{/if}
</div>
@@ -629,6 +696,35 @@
</button>
{/if}
<!-- Uncertainty heatmap toggle (assistant messages with tokens) -->
{#if message.role === "assistant" && message.tokens && message.tokens.length > 0}
<button
onclick={() => toggleHeatmap(message.id)}
class="p-1.5 transition-colors rounded cursor-pointer {isHeatmapVisible(
message.id,
)
? 'text-exo-yellow'
: 'text-exo-light-gray hover:text-exo-yellow'}"
title={isHeatmapVisible(message.id)
? "Hide uncertainty heatmap"
: "Show uncertainty heatmap"}
>
<svg
class="w-3.5 h-3.5"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M9 19v-6a2 2 0 00-2-2H5a2 2 0 00-2 2v6a2 2 0 002 2h2a2 2 0 002-2zm0 0V9a2 2 0 012-2h2a2 2 0 012 2v10m-6 0a2 2 0 002 2h2a2 2 0 002-2m0 0V5a2 2 0 012-2h2a2 2 0 012 2v14a2 2 0 01-2 2h-2a2 2 0 01-2-2z"
/>
</svg>
</button>
{/if}
<!-- Regenerate button (last assistant message only) -->
{#if message.role === "assistant" && isLastAssistantMessage(message.id) && !loading}
<button
@@ -731,3 +827,8 @@
</button>
{/if}
</div>
<ImageLightbox
src={expandedImageSrc}
onclose={() => (expandedImageSrc = null)}
/>
@@ -0,0 +1,91 @@
<script lang="ts">
type FamilyLogoProps = {
family: string;
class?: string;
};
let { family, class: className = "" }: FamilyLogoProps = $props();
</script>
{#if family === "favorites"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12 2l3.09 6.26L22 9.27l-5 4.87 1.18 6.88L12 17.77l-6.18 3.25L7 14.14 2 9.27l6.91-1.01L12 2z"
/>
</svg>
{:else if family === "recents"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M13 3a9 9 0 0 0-9 9H1l3.89 3.89.07.14L9 12H6c0-3.87 3.13-7 7-7s7 3.13 7 7-3.13 7-7 7c-1.93 0-3.68-.79-4.94-2.06l-1.42 1.42A8.954 8.954 0 0 0 13 21a9 9 0 0 0 0-18zm-1 5v5l4.28 2.54.72-1.21-3.5-2.08V8H12z"
/>
</svg>
{:else if family === "llama" || family === "meta"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M6.915 4.03c-1.968 0-3.683 1.28-4.871 3.113C.704 9.208 0 11.883 0 14.449c0 .706.07 1.369.21 1.973a6.624 6.624 0 0 0 .265.86 5.297 5.297 0 0 0 .371.761c.696 1.159 1.818 1.927 3.593 1.927 1.497 0 2.633-.671 3.965-2.444.76-1.012 1.144-1.626 2.663-4.32l.756-1.339.186-.325c.061.1.121.196.183.3l2.152 3.595c.724 1.21 1.665 2.556 2.47 3.314 1.046.987 1.992 1.22 3.06 1.22 1.075 0 1.876-.355 2.455-.843a3.743 3.743 0 0 0 .81-.973c.542-.939.861-2.127.861-3.745 0-2.72-.681-5.357-2.084-7.45-1.282-1.912-2.957-2.93-4.716-2.93-1.047 0-2.088.467-3.053 1.308-.652.57-1.257 1.29-1.82 2.05-.69-.875-1.335-1.547-1.958-2.056-1.182-.966-2.315-1.303-3.454-1.303zm10.16 2.053c1.147 0 2.188.758 2.992 1.999 1.132 1.748 1.647 4.195 1.647 6.4 0 1.548-.368 2.9-1.839 2.9-.58 0-1.027-.23-1.664-1.004-.496-.601-1.343-1.878-2.832-4.358l-.617-1.028a44.908 44.908 0 0 0-1.255-1.98c.07-.109.141-.224.211-.327 1.12-1.667 2.118-2.602 3.358-2.602zm-10.201.553c1.265 0 2.058.791 2.675 1.446.307.327.737.871 1.234 1.579l-1.02 1.566c-.757 1.163-1.882 3.017-2.837 4.338-1.191 1.649-1.81 1.817-2.486 1.817-.524 0-1.038-.237-1.383-.794-.263-.426-.464-1.13-.464-2.046 0-2.221.63-4.535 1.66-6.088.454-.687.964-1.226 1.533-1.533a2.264 2.264 0 0 1 1.088-.285z"
/>
</svg>
{:else if family === "qwen"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12.604 1.34c.393.69.784 1.382 1.174 2.075a.18.18 0 00.157.091h5.552c.174 0 .322.11.446.327l1.454 2.57c.19.337.24.478.024.837-.26.43-.513.864-.76 1.3l-.367.658c-.106.196-.223.28-.04.512l2.652 4.637c.172.301.111.494-.043.77-.437.785-.882 1.564-1.335 2.34-.159.272-.352.375-.68.37-.777-.016-1.552-.01-2.327.016a.099.099 0 00-.081.05 575.097 575.097 0 01-2.705 4.74c-.169.293-.38.363-.725.364-.997.003-2.002.004-3.017.002a.537.537 0 01-.465-.271l-1.335-2.323a.09.09 0 00-.083-.049H4.982c-.285.03-.553-.001-.805-.092l-1.603-2.77a.543.543 0 01-.002-.54l1.207-2.12a.198.198 0 000-.197 550.951 550.951 0 01-1.875-3.272l-.79-1.395c-.16-.31-.173-.496.095-.965.465-.813.927-1.625 1.387-2.436.132-.234.304-.334.584-.335a338.3 338.3 0 012.589-.001.124.124 0 00.107-.063l2.806-4.895a.488.488 0 01.422-.246c.524-.001 1.053 0 1.583-.006L11.704 1c.341-.003.724.032.9.34zm-3.432.403a.06.06 0 00-.052.03L6.254 6.788a.157.157 0 01-.135.078H3.253c-.056 0-.07.025-.041.074l5.81 10.156c.025.042.013.062-.034.063l-2.795.015a.218.218 0 00-.2.116l-1.32 2.31c-.044.078-.021.118.068.118l5.716.008c.046 0 .08.02.104.061l1.403 2.454c.046.081.092.082.139 0l5.006-8.76.783-1.382a.055.055 0 01.096 0l1.424 2.53a.122.122 0 00.107.062l2.763-.02a.04.04 0 00.035-.02.041.041 0 000-.04l-2.9-5.086a.108.108 0 010-.113l.293-.507 1.12-1.977c.024-.041.012-.062-.035-.062H9.2c-.059 0-.073-.026-.043-.077l1.434-2.505a.107.107 0 000-.114L9.225 1.774a.06.06 0 00-.053-.031zm6.29 8.02c.046 0 .058.02.034.06l-.832 1.465-2.613 4.585a.056.056 0 01-.05.029.058.058 0 01-.05-.029L8.498 9.841c-.02-.034-.01-.052.028-.054l.216-.012 6.722-.012z"
/>
</svg>
{:else if family === "deepseek"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M23.748 4.482c-.254-.124-.364.113-.512.234-.051.039-.094.09-.137.136-.372.397-.806.657-1.373.626-.829-.046-1.537.214-2.163.848-.133-.782-.575-1.248-1.247-1.548-.352-.156-.708-.311-.955-.65-.172-.241-.219-.51-.305-.774-.055-.16-.11-.323-.293-.35-.2-.031-.278.136-.356.276-.313.572-.434 1.202-.422 1.84.027 1.436.633 2.58 1.838 3.393.137.093.172.187.129.323-.082.28-.18.552-.266.833-.055.179-.137.217-.329.14a5.526 5.526 0 01-1.736-1.18c-.857-.828-1.631-1.742-2.597-2.458a11.365 11.365 0 00-.689-.471c-.985-.957.13-1.743.388-1.836.27-.098.093-.432-.779-.428-.872.004-1.67.295-2.687.684a3.055 3.055 0 01-.465.137 9.597 9.597 0 00-2.883-.102c-1.885.21-3.39 1.102-4.497 2.623C.082 8.606-.231 10.684.152 12.85c.403 2.284 1.569 4.175 3.36 5.653 1.858 1.533 3.997 2.284 6.438 2.14 1.482-.085 3.133-.284 4.994-1.86.47.234.962.327 1.78.397.63.059 1.236-.03 1.705-.128.735-.156.684-.837.419-.961-2.155-1.004-1.682-.595-2.113-.926 1.096-1.296 2.746-2.642 3.392-7.003.05-.347.007-.565 0-.845-.004-.17.035-.237.23-.256a4.173 4.173 0 001.545-.475c1.396-.763 1.96-2.015 2.093-3.517.02-.23-.004-.467-.247-.588zM11.581 18c-2.089-1.642-3.102-2.183-3.52-2.16-.392.024-.321.471-.235.763.09.288.207.486.371.739.114.167.192.416-.113.603-.673.416-1.842-.14-1.897-.167-1.361-.802-2.5-1.86-3.301-3.307-.774-1.393-1.224-2.887-1.298-4.482-.02-.386.093-.522.477-.592a4.696 4.696 0 011.529-.039c2.132.312 3.946 1.265 5.468 2.774.868.86 1.525 1.887 2.202 2.891.72 1.066 1.494 2.082 2.48 2.914.348.292.625.514.891.677-.802.09-2.14.11-3.054-.614zm1-6.44a.306.306 0 01.415-.287.302.302 0 01.2.288.306.306 0 01-.31.307.303.303 0 01-.304-.308zm3.11 1.596c-.2.081-.399.151-.59.16a1.245 1.245 0 01-.798-.254c-.274-.23-.47-.358-.552-.758a1.73 1.73 0 01.016-.588c.07-.327-.008-.537-.239-.727-.187-.156-.426-.199-.688-.199a.559.559 0 01-.254-.078c-.11-.054-.2-.19-.114-.358.028-.054.16-.186.192-.21.356-.202.767-.136 1.146.016.352.144.618.408 1.001.782.391.451.462.576.685.914.176.265.336.537.445.848.067.195-.019.354-.25.452z"
/>
</svg>
{:else if family === "openai" || family === "gpt-oss"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M22.2819 9.8211a5.9847 5.9847 0 0 0-.5157-4.9108 6.0462 6.0462 0 0 0-6.5098-2.9A6.0651 6.0651 0 0 0 4.9807 4.1818a5.9847 5.9847 0 0 0-3.9977 2.9 6.0462 6.0462 0 0 0 .7427 7.0966 5.98 5.98 0 0 0 .511 4.9107 6.051 6.051 0 0 0 6.5146 2.9001A5.9847 5.9847 0 0 0 13.2599 24a6.0557 6.0557 0 0 0 5.7718-4.2058 5.9894 5.9894 0 0 0 3.9977-2.9001 6.0557 6.0557 0 0 0-.7475-7.0729zm-9.022 12.6081a4.4755 4.4755 0 0 1-2.8764-1.0408l.1419-.0804 4.7783-2.7582a.7948.7948 0 0 0 .3927-.6813v-6.7369l2.02 1.1686a.071.071 0 0 1 .038.052v5.5826a4.504 4.504 0 0 1-4.4945 4.4944zm-9.6607-4.1254a4.4708 4.4708 0 0 1-.5346-3.0137l.142.0852 4.783 2.7582a.7712.7712 0 0 0 .7806 0l5.8428-3.3685v2.3324a.0804.0804 0 0 1-.0332.0615L9.74 19.9502a4.4992 4.4992 0 0 1-6.1408-1.6464zM2.3408 7.8956a4.485 4.485 0 0 1 2.3655-1.9728V11.6a.7664.7664 0 0 0 .3879.6765l5.8144 3.3543-2.0201 1.1685a.0757.0757 0 0 1-.071 0l-4.8303-2.7865A4.504 4.504 0 0 1 2.3408 7.872zm16.5963 3.8558L13.1038 8.364 15.1192 7.2a.0757.0757 0 0 1 .071 0l4.8303 2.7913a4.4944 4.4944 0 0 1-.6765 8.1042v-5.6772a.79.79 0 0 0-.407-.667zm2.0107-3.0231l-.142-.0852-4.7735-2.7818a.7759.7759 0 0 0-.7854 0L9.409 9.2297V6.8974a.0662.0662 0 0 1 .0284-.0615l4.8303-2.7866a4.4992 4.4992 0 0 1 6.6802 4.66zM8.3065 12.863l-2.02-1.1638a.0804.0804 0 0 1-.038-.0567V6.0742a4.4992 4.4992 0 0 1 7.3757-3.4537l-.142.0805L8.704 5.459a.7948.7948 0 0 0-.3927.6813zm1.0976-2.3654l2.602-1.4998 2.6069 1.4998v2.9994l-2.5974 1.4997-2.6067-1.4997Z"
/>
</svg>
{:else if family === "glm"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M11.991 23.503a.24.24 0 00-.244.248.24.24 0 00.244.249.24.24 0 00.245-.249.24.24 0 00-.22-.247l-.025-.001zM9.671 5.365a1.697 1.697 0 011.099 2.132l-.071.172-.016.04-.018.054c-.07.16-.104.32-.104.498-.035.71.47 1.279 1.186 1.314h.366c1.309.053 2.338 1.173 2.286 2.523-.052 1.332-1.152 2.38-2.478 2.327h-.174c-.715.018-1.274.64-1.239 1.368 0 .124.018.23.053.337.209.373.54.658.96.8.75.23 1.517-.125 1.9-.782l.018-.035c.402-.64 1.17-.96 1.92-.711.854.284 1.378 1.226 1.099 2.167a1.661 1.661 0 01-2.077 1.102 1.711 1.711 0 01-.907-.711l-.017-.035c-.2-.323-.463-.58-.851-.711l-.056-.018a1.646 1.646 0 00-1.954.746 1.66 1.66 0 01-1.065.764 1.677 1.677 0 01-1.989-1.279c-.209-.906.332-1.83 1.257-2.043a1.51 1.51 0 01.296-.035h.018c.68-.071 1.151-.622 1.116-1.333a1.307 1.307 0 00-.227-.693 2.515 2.515 0 01-.366-1.403 2.39 2.39 0 01.366-1.208c.14-.195.21-.444.227-.693.018-.71-.506-1.261-1.186-1.332l-.07-.018a1.43 1.43 0 01-.299-.07l-.05-.019a1.7 1.7 0 01-1.047-2.114 1.68 1.68 0 012.094-1.101zm-5.575 10.11c.26-.264.639-.367.994-.27.355.096.633.379.728.74.095.362-.007.748-.267 1.013-.402.41-1.053.41-1.455 0a1.062 1.062 0 010-1.482zm14.845-.294c.359-.09.738.024.992.297.254.274.344.665.237 1.025-.107.36-.396.634-.756.718-.551.128-1.1-.22-1.23-.781a1.05 1.05 0 01.757-1.26zm-.064-4.39c.314.32.49.753.49 1.206 0 .452-.176.886-.49 1.206-.315.32-.74.5-1.185.5-.444 0-.87-.18-1.184-.5a1.727 1.727 0 010-2.412 1.654 1.654 0 012.369 0zm-11.243.163c.364.484.447 1.128.218 1.691a1.665 1.665 0 01-2.188.923c-.855-.36-1.26-1.358-.907-2.228a1.68 1.68 0 011.33-1.038c.593-.08 1.183.169 1.547.652zm11.545-4.221c.368 0 .708.2.892.524.184.324.184.724 0 1.048a1.026 1.026 0 01-.892.524c-.568 0-1.03-.47-1.03-1.048 0-.579.462-1.048 1.03-1.048zm-14.358 0c.368 0 .707.2.891.524.184.324.184.724 0 1.048a1.026 1.026 0 01-.891.524c-.569 0-1.03-.47-1.03-1.048 0-.579.461-1.048 1.03-1.048zm10.031-1.475c.925 0 1.675.764 1.675 1.706s-.75 1.705-1.675 1.705-1.674-.763-1.674-1.705c0-.942.75-1.706 1.674-1.706zm-2.626-.684c.362-.082.653-.356.761-.718a1.062 1.062 0 00-.238-1.028 1.017 1.017 0 00-.996-.294c-.547.14-.881.7-.752 1.257.13.558.675.907 1.225.783zm0 16.876c.359-.087.644-.36.75-.72a1.062 1.062 0 00-.237-1.019 1.018 1.018 0 00-.985-.301 1.037 1.037 0 00-.762.717c-.108.361-.017.754.239 1.028.245.263.606.377.953.305l.043-.01zM17.19 3.5a.631.631 0 00.628-.64c0-.355-.279-.64-.628-.64a.631.631 0 00-.628.64c0 .355.28.64.628.64zm-10.38 0a.631.631 0 00.628-.64c0-.355-.28-.64-.628-.64a.631.631 0 00-.628.64c0 .355.279.64.628.64zm-5.182 7.852a.631.631 0 00-.628.64c0 .354.28.639.628.639a.63.63 0 00.627-.606l.001-.034a.62.62 0 00-.628-.64zm5.182 9.13a.631.631 0 00-.628.64c0 .355.279.64.628.64a.631.631 0 00.628-.64c0-.355-.28-.64-.628-.64zm10.38.018a.631.631 0 00-.628.64c0 .355.28.64.628.64a.631.631 0 00.628-.64c0-.355-.279-.64-.628-.64zm5.182-9.148a.631.631 0 00-.628.64c0 .354.279.639.628.639a.631.631 0 00.628-.64c0-.355-.28-.64-.628-.64zm-.384-4.992a.24.24 0 00.244-.249.24.24 0 00-.244-.249.24.24 0 00-.244.249c0 .142.122.249.244.249zM11.991.497a.24.24 0 00.245-.248A.24.24 0 0011.99 0a.24.24 0 00-.244.249c0 .133.108.236.223.247l.021.001zM2.011 6.36a.24.24 0 00.245-.249.24.24 0 00-.244-.249.24.24 0 00-.244.249.24.24 0 00.244.249zm0 11.263a.24.24 0 00-.243.248.24.24 0 00.244.249.24.24 0 00.244-.249.252.252 0 00-.244-.248zm19.995-.018a.24.24 0 00-.245.248.24.24 0 00.245.25.24.24 0 00.244-.25.252.252 0 00-.244-.248z"
/>
</svg>
{:else if family === "minimax"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M16.278 2c1.156 0 2.093.927 2.093 2.07v12.501a.74.74 0 00.744.709.74.74 0 00.743-.709V9.099a2.06 2.06 0 012.071-2.049A2.06 2.06 0 0124 9.1v6.561a.649.649 0 01-.652.645.649.649 0 01-.653-.645V9.1a.762.762 0 00-.766-.758.762.762 0 00-.766.758v7.472a2.037 2.037 0 01-2.048 2.026 2.037 2.037 0 01-2.048-2.026v-12.5a.785.785 0 00-.788-.753.785.785 0 00-.789.752l-.001 15.904A2.037 2.037 0 0113.441 22a2.037 2.037 0 01-2.048-2.026V18.04c0-.356.292-.645.652-.645.36 0 .652.289.652.645v1.934c0 .263.142.506.372.638.23.131.514.131.744 0a.734.734 0 00.372-.638V4.07c0-1.143.937-2.07 2.093-2.07zm-5.674 0c1.156 0 2.093.927 2.093 2.07v11.523a.648.648 0 01-.652.645.648.648 0 01-.652-.645V4.07a.785.785 0 00-.789-.78.785.785 0 00-.789.78v14.013a2.06 2.06 0 01-2.07 2.048 2.06 2.06 0 01-2.071-2.048V9.1a.762.762 0 00-.766-.758.762.762 0 00-.766.758v3.8a2.06 2.06 0 01-2.071 2.049A2.06 2.06 0 010 12.9v-1.378c0-.357.292-.646.652-.646.36 0 .653.29.653.646V12.9c0 .418.343.757.766.757s.766-.339.766-.757V9.099a2.06 2.06 0 012.07-2.048 2.06 2.06 0 012.071 2.048v8.984c0 .419.343.758.767.758.423 0 .766-.339.766-.758V4.07c0-1.143.937-2.07 2.093-2.07z"
/>
</svg>
{:else if family === "kimi"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M19.738 5.776c.163-.209.306-.4.457-.585.07-.087.064-.153-.004-.244-.655-.861-.717-1.817-.34-2.787.283-.73.909-1.072 1.674-1.145.477-.045.945.004 1.379.236.57.305.902.77 1.01 1.412.086.512.07 1.012-.075 1.508-.257.878-.888 1.333-1.753 1.448-.718.096-1.446.108-2.17.157-.056.004-.113 0-.178 0z"
/>
<path
d="M17.962 1.844h-4.326l-3.425 7.81H5.369V1.878H1.5V22h3.87v-8.477h6.824a3.025 3.025 0 002.743-1.75V22h3.87v-8.477a3.87 3.87 0 00-3.588-3.86v-.01h-2.125a3.94 3.94 0 002.323-2.12l2.545-5.689z"
/>
</svg>
{:else if family === "flux"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12 2L2 19h7.5l2.5-4.5L14.5 19H22L12 2zm0 4.5L16.5 17h-3l-1.5-2.7L10.5 17h-3L12 6.5z"
/>
</svg>
{:else if family === "qwen-image"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12.604 1.34c.393.69.784 1.382 1.174 2.075a.18.18 0 00.157.091h5.552c.174 0 .322.11.446.327l1.454 2.57c.19.337.24.478.024.837-.26.43-.513.864-.76 1.3l-.367.658c-.106.196-.223.28-.04.512l2.652 4.637c.172.301.111.494-.043.77-.437.785-.882 1.564-1.335 2.34-.159.272-.352.375-.68.37-.777-.016-1.552-.01-2.327.016a.099.099 0 00-.081.05 575.097 575.097 0 01-2.705 4.74c-.169.293-.38.363-.725.364-.997.003-2.002.004-3.017.002a.537.537 0 01-.465-.271l-1.335-2.323a.09.09 0 00-.083-.049H4.982c-.285.03-.553-.001-.805-.092l-1.603-2.77a.543.543 0 01-.002-.54l1.207-2.12a.198.198 0 000-.197 550.951 550.951 0 01-1.875-3.272l-.79-1.395c-.16-.31-.173-.496.095-.965.465-.813.927-1.625 1.387-2.436.132-.234.304-.334.584-.335a338.3 338.3 0 012.589-.001.124.124 0 00.107-.063l2.806-4.895a.488.488 0 01.422-.246c.524-.001 1.053 0 1.583-.006L11.704 1c.341-.003.724.032.9.34zm-3.432.403a.06.06 0 00-.052.03L6.254 6.788a.157.157 0 01-.135.078H3.253c-.056 0-.07.025-.041.074l5.81 10.156c.025.042.013.062-.034.063l-2.795.015a.218.218 0 00-.2.116l-1.32 2.31c-.044.078-.021.118.068.118l5.716.008c.046 0 .08.02.104.061l1.403 2.454c.046.081.092.082.139 0l5.006-8.76.783-1.382a.055.055 0 01.096 0l1.424 2.53a.122.122 0 00.107.062l2.763-.02a.04.04 0 00.035-.02.041.041 0 000-.04l-2.9-5.086a.108.108 0 010-.113l.293-.507 1.12-1.977c.024-.041.012-.062-.035-.062H9.2c-.059 0-.073-.026-.043-.077l1.434-2.505a.107.107 0 000-.114L9.225 1.774a.06.06 0 00-.053-.031zm6.29 8.02c.046 0 .058.02.034.06l-.832 1.465-2.613 4.585a.056.056 0 01-.05.029.058.058 0 01-.05-.029L8.498 9.841c-.02-.034-.01-.052.028-.054l.216-.012 6.722-.012z"
/>
</svg>
{:else if family === "huggingface"}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12.025 1.13c-5.77 0-10.449 4.647-10.449 10.378 0 1.112.178 2.181.503 3.185.064-.222.203-.444.416-.577a.96.96 0 0 1 .524-.15c.293 0 .584.124.84.284.278.173.48.408.71.694.226.282.458.611.684.951v-.014c.017-.324.106-.622.264-.874s.403-.487.762-.543c.3-.047.596.06.787.203s.31.313.4.467c.15.257.212.468.233.542.01.026.653 1.552 1.657 2.54.616.605 1.01 1.223 1.082 1.912.055.537-.096 1.059-.38 1.572.637.121 1.294.187 1.967.187.657 0 1.298-.063 1.921-.178-.287-.517-.44-1.041-.384-1.581.07-.69.465-1.307 1.081-1.913 1.004-.987 1.647-2.513 1.657-2.539.021-.074.083-.285.233-.542.09-.154.208-.323.4-.467a1.08 1.08 0 0 1 .787-.203c.359.056.604.29.762.543s.247.55.265.874v.015c.225-.34.457-.67.683-.952.23-.286.432-.52.71-.694.257-.16.547-.284.84-.285a.97.97 0 0 1 .524.151c.228.143.373.388.43.625l.006.04a10.3 10.3 0 0 0 .534-3.273c0-5.731-4.678-10.378-10.449-10.378M8.327 6.583a1.5 1.5 0 0 1 .713.174 1.487 1.487 0 0 1 .617 2.013c-.183.343-.762-.214-1.102-.094-.38.134-.532.914-.917.71a1.487 1.487 0 0 1 .69-2.803m7.486 0a1.487 1.487 0 0 1 .689 2.803c-.385.204-.536-.576-.916-.71-.34-.12-.92.437-1.103.094a1.487 1.487 0 0 1 .617-2.013 1.5 1.5 0 0 1 .713-.174m-10.68 1.55a.96.96 0 1 1 0 1.921.96.96 0 0 1 0-1.92m13.838 0a.96.96 0 1 1 0 1.92.96.96 0 0 1 0-1.92M8.489 11.458c.588.01 1.965 1.157 3.572 1.164 1.607-.007 2.984-1.155 3.572-1.164.196-.003.305.12.305.454 0 .886-.424 2.328-1.563 3.202-.22-.756-1.396-1.366-1.63-1.32q-.011.001-.02.006l-.044.026-.01.008-.03.024q-.018.017-.035.036l-.032.04a1 1 0 0 0-.058.09l-.014.025q-.049.088-.11.19a1 1 0 0 1-.083.116 1.2 1.2 0 0 1-.173.18q-.035.029-.075.058a1.3 1.3 0 0 1-.251-.243 1 1 0 0 1-.076-.107c-.124-.193-.177-.363-.337-.444-.034-.016-.104-.008-.2.022q-.094.03-.216.087-.06.028-.125.063l-.13.074q-.067.04-.136.086a3 3 0 0 0-.135.096 3 3 0 0 0-.26.219 2 2 0 0 0-.12.121 2 2 0 0 0-.106.128l-.002.002a2 2 0 0 0-.09.132l-.001.001a1.2 1.2 0 0 0-.105.212q-.013.036-.024.073c-1.139-.875-1.563-2.317-1.563-3.203 0-.334.109-.457.305-.454m.836 10.354c.824-1.19.766-2.082-.365-3.194-1.13-1.112-1.789-2.738-1.789-2.738s-.246-.945-.806-.858-.97 1.499.202 2.362c1.173.864-.233 1.45-.685.64-.45-.812-1.683-2.896-2.322-3.295s-1.089-.175-.938.647 2.822 2.813 2.562 3.244-1.176-.506-1.176-.506-2.866-2.567-3.49-1.898.473 1.23 2.037 2.16c1.564.932 1.686 1.178 1.464 1.53s-3.675-2.511-4-1.297c-.323 1.214 3.524 1.567 3.287 2.405-.238.839-2.71-1.587-3.216-.642-.506.946 3.49 2.056 3.522 2.064 1.29.33 4.568 1.028 5.713-.624m5.349 0c-.824-1.19-.766-2.082.365-3.194 1.13-1.112 1.789-2.738 1.789-2.738s.246-.945.806-.858.97 1.499-.202 2.362c-1.173.864.233 1.45.685.64.451-.812 1.683-2.896 2.322-3.295s1.089-.175.938.647-2.822 2.813-2.562 3.244 1.176-.506 1.176-.506 2.866-2.567 3.49-1.898-.473 1.23-2.037 2.16c-1.564.932-1.686 1.178-1.464 1.53s3.675-2.511 4-1.297c.323 1.214-3.524 1.567-3.287 2.405.238.839 2.71-1.587 3.216-.642.506.946-3.49 2.056-3.522 2.064-1.29.33-4.568 1.028-5.713-.624"
/>
</svg>
{:else}
<svg class="w-6 h-6 {className}" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm-2 15l-5-5 1.41-1.41L10 14.17l7.59-7.59L19 8l-9 9z"
/>
</svg>
{/if}
@@ -0,0 +1,176 @@
<script lang="ts">
import FamilyLogos from "./FamilyLogos.svelte";
type FamilySidebarProps = {
families: string[];
selectedFamily: string | null;
hasFavorites: boolean;
hasRecents: boolean;
onSelect: (family: string | null) => void;
};
let {
families,
selectedFamily,
hasFavorites,
hasRecents,
onSelect,
}: FamilySidebarProps = $props();
// Family display names
const familyNames: Record<string, string> = {
favorites: "Favorites",
recents: "Recent",
huggingface: "Hub",
llama: "Meta",
qwen: "Qwen",
deepseek: "DeepSeek",
"gpt-oss": "OpenAI",
glm: "GLM",
minimax: "MiniMax",
kimi: "Kimi",
flux: "FLUX",
"qwen-image": "Qwen Img",
};
function getFamilyName(family: string): string {
return (
familyNames[family] || family.charAt(0).toUpperCase() + family.slice(1)
);
}
</script>
<div
class="flex flex-col gap-1 py-2 px-1 border-r border-exo-yellow/10 bg-exo-medium-gray/30 min-w-[64px] overflow-y-auto scrollbar-hide"
>
<!-- All models (no filter) -->
<button
type="button"
onclick={() => onSelect(null)}
class="group flex flex-col items-center justify-center p-2 rounded transition-all duration-200 cursor-pointer {selectedFamily ===
null
? 'bg-exo-yellow/20 border-l-2 border-exo-yellow'
: 'hover:bg-white/5 border-l-2 border-transparent'}"
title="All models"
>
<svg
class="w-5 h-5 {selectedFamily === null
? 'text-exo-yellow'
: 'text-white/50 group-hover:text-white/70'}"
viewBox="0 0 24 24"
fill="currentColor"
>
<path
d="M4 8h4V4H4v4zm6 12h4v-4h-4v4zm-6 0h4v-4H4v4zm0-6h4v-4H4v4zm6 0h4v-4h-4v4zm6-10v4h4V4h-4zm-6 4h4V4h-4v4zm6 6h4v-4h-4v4zm0 6h4v-4h-4v4z"
/>
</svg>
<span
class="text-[9px] font-mono mt-0.5 {selectedFamily === null
? 'text-exo-yellow'
: 'text-white/40 group-hover:text-white/60'}">All</span
>
</button>
<!-- Favorites (only show if has favorites) -->
{#if hasFavorites}
<button
type="button"
onclick={() => onSelect("favorites")}
class="group flex flex-col items-center justify-center p-2 rounded transition-all duration-200 cursor-pointer {selectedFamily ===
'favorites'
? 'bg-exo-yellow/20 border-l-2 border-exo-yellow'
: 'hover:bg-white/5 border-l-2 border-transparent'}"
title="Show favorited models"
>
<FamilyLogos
family="favorites"
class={selectedFamily === "favorites"
? "text-amber-400"
: "text-white/50 group-hover:text-amber-400/70"}
/>
<span
class="text-[9px] font-mono mt-0.5 {selectedFamily === 'favorites'
? 'text-amber-400'
: 'text-white/40 group-hover:text-white/60'}">Faves</span
>
</button>
{/if}
<!-- Recent (only show if has recent models) -->
{#if hasRecents}
<button
type="button"
onclick={() => onSelect("recents")}
class="group flex flex-col items-center justify-center p-2 rounded transition-all duration-200 cursor-pointer {selectedFamily ===
'recents'
? 'bg-exo-yellow/20 border-l-2 border-exo-yellow'
: 'hover:bg-white/5 border-l-2 border-transparent'}"
title="Recently launched models"
>
<FamilyLogos
family="recents"
class={selectedFamily === "recents"
? "text-exo-yellow"
: "text-white/50 group-hover:text-white/70"}
/>
<span
class="text-[9px] font-mono mt-0.5 {selectedFamily === 'recents'
? 'text-exo-yellow'
: 'text-white/40 group-hover:text-white/60'}">Recent</span
>
</button>
{/if}
<!-- HuggingFace Hub -->
<button
type="button"
onclick={() => onSelect("huggingface")}
class="group flex flex-col items-center justify-center p-2 rounded transition-all duration-200 cursor-pointer {selectedFamily ===
'huggingface'
? 'bg-orange-500/20 border-l-2 border-orange-400'
: 'hover:bg-white/5 border-l-2 border-transparent'}"
title="Browse and add models from Hugging Face"
>
<FamilyLogos
family="huggingface"
class={selectedFamily === "huggingface"
? "text-orange-400"
: "text-white/50 group-hover:text-orange-400/70"}
/>
<span
class="text-[9px] font-mono mt-0.5 {selectedFamily === 'huggingface'
? 'text-orange-400'
: 'text-white/40 group-hover:text-white/60'}">Hub</span
>
</button>
<div class="h-px bg-exo-yellow/10 my-1"></div>
<!-- Model families -->
{#each families as family}
<button
type="button"
onclick={() => onSelect(family)}
class="group flex flex-col items-center justify-center p-2 rounded transition-all duration-200 cursor-pointer {selectedFamily ===
family
? 'bg-exo-yellow/20 border-l-2 border-exo-yellow'
: 'hover:bg-white/5 border-l-2 border-transparent'}"
title={getFamilyName(family)}
>
<FamilyLogos
{family}
class={selectedFamily === family
? "text-exo-yellow"
: "text-white/50 group-hover:text-white/70"}
/>
<span
class="text-[9px] font-mono mt-0.5 truncate max-w-full {selectedFamily ===
family
? 'text-exo-yellow'
: 'text-white/40 group-hover:text-white/60'}"
>
{getFamilyName(family)}
</span>
</button>
{/each}
</div>
@@ -0,0 +1,151 @@
<script lang="ts">
interface HuggingFaceModel {
id: string;
author: string;
downloads: number;
likes: number;
last_modified: string;
tags: string[];
}
type HuggingFaceResultItemProps = {
model: HuggingFaceModel;
isAdded: boolean;
isAdding: boolean;
onAdd: () => void;
onSelect: () => void;
downloadedOnNodes?: string[];
};
let {
model,
isAdded,
isAdding,
onAdd,
onSelect,
downloadedOnNodes = [],
}: HuggingFaceResultItemProps = $props();
function formatNumber(num: number): string {
if (num >= 1000000) {
return `${(num / 1000000).toFixed(1)}M`;
} else if (num >= 1000) {
return `${(num / 1000).toFixed(1)}k`;
}
return num.toString();
}
// Extract model name from full ID (e.g., "mlx-community/Llama-3.2-1B" -> "Llama-3.2-1B")
const modelName = $derived(model.id.split("/").pop() || model.id);
</script>
<div
class="flex items-center justify-between gap-3 px-3 py-2.5 hover:bg-white/5 transition-colors border-b border-white/5 last:border-b-0"
>
<div class="flex-1 min-w-0">
<div class="flex items-center gap-2">
<span class="text-sm font-mono text-white truncate" title={model.id}
>{modelName}</span
>
{#if downloadedOnNodes.length > 0}
<span
class="flex-shrink-0"
title={`Downloaded on ${downloadedOnNodes.join(", ")}`}
>
<svg
class="w-4 h-4"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
stroke-linecap="round"
stroke-linejoin="round"
>
<path
class="text-white/40"
d="M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z"
/>
<path class="text-green-400" d="m9 13 2 2 4-4" />
</svg>
</span>
{/if}
{#if isAdded}
<span
class="px-1.5 py-0.5 text-[10px] font-mono bg-green-500/20 text-green-400 rounded"
>Added</span
>
{/if}
</div>
<div class="flex items-center gap-3 mt-0.5 text-xs text-white/40">
<span class="truncate">{model.author}</span>
<span
class="flex items-center gap-1 shrink-0"
title="Downloads in the last 30 days"
>
<svg
class="w-3 h-3"
fill="none"
stroke="currentColor"
viewBox="0 0 24 24"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M4 16v1a3 3 0 003 3h10a3 3 0 003-3v-1m-4-4l-4 4m0 0l-4-4m4 4V4"
/>
</svg>
{formatNumber(model.downloads)}
</span>
<span
class="flex items-center gap-1 shrink-0"
title="Community likes on Hugging Face"
>
<svg
class="w-3 h-3"
fill="none"
stroke="currentColor"
viewBox="0 0 24 24"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M4.318 6.318a4.5 4.5 0 000 6.364L12 20.364l7.682-7.682a4.5 4.5 0 00-6.364-6.364L12 7.636l-1.318-1.318a4.5 4.5 0 00-6.364 0z"
/>
</svg>
{formatNumber(model.likes)}
</span>
</div>
</div>
<div class="flex items-center gap-2 shrink-0">
{#if isAdded}
<button
type="button"
onclick={onSelect}
class="px-3 py-1.5 text-xs font-mono tracking-wider uppercase bg-exo-yellow/10 text-exo-yellow border border-exo-yellow/30 hover:bg-exo-yellow/20 transition-colors rounded cursor-pointer"
>
Select
</button>
{:else}
<button
type="button"
onclick={onAdd}
disabled={isAdding}
class="px-3 py-1.5 text-xs font-mono tracking-wider uppercase bg-orange-500/10 text-orange-400 border border-orange-400/30 hover:bg-orange-500/20 transition-colors rounded cursor-pointer disabled:opacity-50 disabled:cursor-not-allowed"
>
{#if isAdding}
<span class="flex items-center gap-1.5">
<span
class="w-3 h-3 border-2 border-orange-400 border-t-transparent rounded-full animate-spin"
></span>
Adding...
</span>
{:else}
+ Add
{/if}
</button>
{/if}
</div>
</div>
@@ -0,0 +1,96 @@
<script lang="ts">
import { fade, fly } from "svelte/transition";
import { cubicOut } from "svelte/easing";
interface Props {
src: string | null;
onclose: () => void;
}
let { src, onclose }: Props = $props();
function handleKeydown(e: KeyboardEvent) {
if (e.key === "Escape") {
onclose();
}
}
function extensionFromSrc(dataSrc: string): string {
const match = dataSrc.match(/^data:image\/(\w+)/);
if (match) return match[1] === "jpeg" ? "jpg" : match[1];
const urlMatch = dataSrc.match(/\.(\w+)(?:\?|$)/);
if (urlMatch) return urlMatch[1];
return "png";
}
function handleDownload(e: MouseEvent) {
e.stopPropagation();
if (!src) return;
const link = document.createElement("a");
link.href = src;
link.download = `image-${Date.now()}.${extensionFromSrc(src)}`;
link.click();
}
function handleClose(e: MouseEvent) {
e.stopPropagation();
onclose();
}
</script>
<svelte:window onkeydown={src ? handleKeydown : undefined} />
{#if src}
<div
class="fixed inset-0 z-50 bg-black/90 backdrop-blur-sm flex items-center justify-center"
transition:fade={{ duration: 200 }}
onclick={onclose}
role="presentation"
onintrostart={() => (document.body.style.overflow = "hidden")}
onoutroend={() => (document.body.style.overflow = "")}
>
<div class="absolute top-4 right-4 flex gap-2 z-10">
<button
type="button"
class="p-2 rounded-lg bg-exo-dark-gray/80 border border-exo-yellow/30 text-exo-yellow hover:bg-exo-dark-gray hover:border-exo-yellow/50 cursor-pointer transition-colors"
onclick={handleDownload}
title="Download image"
>
<svg
class="w-5 h-5"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
stroke-width="2"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
d="M4 16v1a3 3 0 003 3h10a3 3 0 003-3v-1m-4-4l-4 4m0 0l-4-4m4 4V4"
/>
</svg>
</button>
<button
type="button"
class="p-2 rounded-lg bg-exo-dark-gray/80 border border-exo-yellow/30 text-exo-yellow hover:bg-exo-dark-gray hover:border-exo-yellow/50 cursor-pointer transition-colors"
onclick={handleClose}
title="Close"
>
<svg class="w-5 h-5" viewBox="0 0 24 24" fill="currentColor">
<path
d="M19 6.41L17.59 5 12 10.59 6.41 5 5 6.41 10.59 12 5 17.59 6.41 19 12 13.41 17.59 19 19 17.59 13.41 12 19 6.41z"
/>
</svg>
</button>
</div>
<!-- svelte-ignore a11y_no_noninteractive_element_interactions, a11y_click_events_have_key_events -->
<img
{src}
alt=""
class="max-w-[90vw] max-h-[90vh] object-contain rounded-lg shadow-2xl"
transition:fly={{ y: 20, duration: 300, easing: cubicOut }}
onclick={(e) => e.stopPropagation()}
/>
</div>
{/if}
@@ -64,6 +64,8 @@
"1024x1024",
"1024x768",
"768x1024",
"1024x1365",
"1365x1024",
];
const qualityOptions: ImageGenerationParams["quality"][] = [
@@ -110,6 +112,36 @@
setImageGenerationParams({ negativePrompt: value || null });
}
function handleNumImagesChange(event: Event) {
const input = event.target as HTMLInputElement;
const value = input.value.trim();
if (value === "") {
setImageGenerationParams({ numImages: 1 });
} else {
const num = parseInt(value, 10);
if (!isNaN(num) && num >= 1) {
setImageGenerationParams({ numImages: num });
}
}
}
function handleStreamChange(enabled: boolean) {
setImageGenerationParams({ stream: enabled });
}
function handlePartialImagesChange(event: Event) {
const input = event.target as HTMLInputElement;
const value = input.value.trim();
if (value === "") {
setImageGenerationParams({ partialImages: 0 });
} else {
const num = parseInt(value, 10);
if (!isNaN(num) && num >= 0) {
setImageGenerationParams({ partialImages: num });
}
}
}
function clearSteps() {
setImageGenerationParams({ numInferenceSteps: null });
}
@@ -118,6 +150,15 @@
setImageGenerationParams({ guidance: null });
}
function handleNumSyncStepsChange(event: Event) {
const value = parseInt((event.target as HTMLInputElement).value, 10);
setImageGenerationParams({ numSyncSteps: value });
}
function clearNumSyncSteps() {
setImageGenerationParams({ numSyncSteps: null });
}
function handleReset() {
resetImageGenerationParams();
showAdvanced = false;
@@ -127,97 +168,100 @@
params.seed !== null ||
params.numInferenceSteps !== null ||
params.guidance !== null ||
(params.negativePrompt !== null && params.negativePrompt.trim() !== ""),
(params.negativePrompt !== null && params.negativePrompt.trim() !== "") ||
params.numSyncSteps !== null,
);
</script>
<div class="border-b border-exo-medium-gray/30 px-3 py-2">
<!-- Basic params row -->
<div class="flex items-center gap-3 flex-wrap">
<!-- Size -->
<div class="flex items-center gap-1.5">
<span class="text-xs text-exo-light-gray uppercase tracking-wider"
>SIZE:</span
>
<div class="relative">
<button
bind:this={sizeButtonRef}
type="button"
onclick={() => (isSizeDropdownOpen = !isSizeDropdownOpen)}
class="bg-exo-medium-gray/50 border border-exo-yellow/30 rounded pl-2 pr-6 py-1 text-xs font-mono text-exo-yellow cursor-pointer transition-all duration-200 hover:border-exo-yellow/50 focus:outline-none focus:border-exo-yellow/70 {isSizeDropdownOpen
? 'border-exo-yellow/70'
: ''}"
<!-- Size (hidden in edit mode - output size comes from input image) -->
{#if !isEditMode}
<div class="flex items-center gap-1.5">
<span class="text-xs text-exo-light-gray uppercase tracking-wider"
>SIZE:</span
>
{params.size}
</button>
<div
class="absolute right-1.5 top-1/2 -translate-y-1/2 pointer-events-none transition-transform duration-200 {isSizeDropdownOpen
? 'rotate-180'
: ''}"
>
<svg
class="w-3 h-3 text-exo-yellow/60"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
<div class="relative">
<button
bind:this={sizeButtonRef}
type="button"
onclick={() => (isSizeDropdownOpen = !isSizeDropdownOpen)}
class="bg-exo-medium-gray/50 border border-exo-yellow/30 rounded pl-2 pr-6 py-1 text-xs font-mono text-exo-yellow cursor-pointer transition-all duration-200 hover:border-exo-yellow/50 focus:outline-none focus:border-exo-yellow/70 {isSizeDropdownOpen
? 'border-exo-yellow/70'
: ''}"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M19 9l-7 7-7-7"
/>
</svg>
</div>
</div>
{#if isSizeDropdownOpen}
<!-- Backdrop to close dropdown -->
<button
type="button"
class="fixed inset-0 z-[9998] cursor-default"
onclick={() => (isSizeDropdownOpen = false)}
aria-label="Close dropdown"
></button>
<!-- Dropdown Panel - fixed positioning to escape overflow:hidden -->
<div
class="fixed bg-exo-dark-gray border border-exo-yellow/30 rounded shadow-lg shadow-black/50 z-[9999] max-h-48 overflow-y-auto min-w-max"
style="bottom: calc(100vh - {sizeDropdownPosition()
.top}px + 4px); left: {sizeDropdownPosition().left}px;"
>
<div class="py-1">
{#each sizeOptions as size}
<button
type="button"
onclick={() => selectSize(size)}
class="w-full px-3 py-1.5 text-left text-xs font-mono tracking-wide transition-colors duration-100 flex items-center gap-2 {params.size ===
size
? 'bg-transparent text-exo-yellow'
: 'text-exo-light-gray hover:text-exo-yellow'}"
>
{#if params.size === size}
<svg
class="w-3 h-3 flex-shrink-0"
fill="currentColor"
viewBox="0 0 20 20"
>
<path
fill-rule="evenodd"
d="M16.707 5.293a1 1 0 010 1.414l-8 8a1 1 0 01-1.414 0l-4-4a1 1 0 011.414-1.414L8 12.586l7.293-7.293a1 1 0 011.414 0z"
clip-rule="evenodd"
/>
</svg>
{:else}
<span class="w-3"></span>
{/if}
<span>{size}</span>
</button>
{/each}
{params.size}
</button>
<div
class="absolute right-1.5 top-1/2 -translate-y-1/2 pointer-events-none transition-transform duration-200 {isSizeDropdownOpen
? 'rotate-180'
: ''}"
>
<svg
class="w-3 h-3 text-exo-yellow/60"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M19 9l-7 7-7-7"
/>
</svg>
</div>
</div>
{/if}
</div>
{#if isSizeDropdownOpen}
<!-- Backdrop to close dropdown -->
<button
type="button"
class="fixed inset-0 z-[9998] cursor-default"
onclick={() => (isSizeDropdownOpen = false)}
aria-label="Close dropdown"
></button>
<!-- Dropdown Panel - fixed positioning to escape overflow:hidden -->
<div
class="fixed bg-exo-dark-gray border border-exo-yellow/30 rounded shadow-lg shadow-black/50 z-[9999] max-h-48 overflow-y-auto min-w-max"
style="bottom: calc(100vh - {sizeDropdownPosition()
.top}px + 4px); left: {sizeDropdownPosition().left}px;"
>
<div class="py-1">
{#each sizeOptions as size}
<button
type="button"
onclick={() => selectSize(size)}
class="w-full px-3 py-1.5 text-left text-xs font-mono tracking-wide transition-colors duration-100 flex items-center gap-2 {params.size ===
size
? 'bg-transparent text-exo-yellow'
: 'text-exo-light-gray hover:text-exo-yellow'}"
>
{#if params.size === size}
<svg
class="w-3 h-3 flex-shrink-0"
fill="currentColor"
viewBox="0 0 20 20"
>
<path
fill-rule="evenodd"
d="M16.707 5.293a1 1 0 010 1.414l-8 8a1 1 0 01-1.414 0l-4-4a1 1 0 011.414-1.414L8 12.586l7.293-7.293a1 1 0 011.414 0z"
clip-rule="evenodd"
/>
</svg>
{:else}
<span class="w-3"></span>
{/if}
<span>{size}</span>
</button>
{/each}
</div>
</div>
{/if}
</div>
{/if}
<!-- Quality -->
<div class="flex items-center gap-1.5">
@@ -325,6 +369,59 @@
</div>
</div>
<!-- Number of Images (not in edit mode) -->
{#if !isEditMode}
<div class="flex items-center gap-1.5">
<span class="text-xs text-exo-light-gray uppercase tracking-wider"
>IMAGES:</span
>
<input
type="number"
min="1"
value={params.numImages}
oninput={handleNumImagesChange}
class="w-12 bg-exo-medium-gray/50 border border-exo-yellow/30 rounded px-2 py-1 text-xs font-mono text-exo-yellow text-center transition-all duration-200 hover:border-exo-yellow/50 focus:outline-none focus:border-exo-yellow/70"
/>
</div>
{/if}
<!-- Stream toggle -->
<div class="flex items-center gap-1.5">
<span class="text-xs text-exo-light-gray uppercase tracking-wider"
>STREAM:</span
>
<button
type="button"
onclick={() => handleStreamChange(!params.stream)}
class="w-8 h-4 rounded-full transition-all duration-200 cursor-pointer relative {params.stream
? 'bg-exo-yellow'
: 'bg-exo-medium-gray/50 border border-exo-yellow/30'}"
title={params.stream ? "Streaming enabled" : "Streaming disabled"}
>
<div
class="absolute top-0.5 w-3 h-3 rounded-full transition-all duration-200 {params.stream
? 'right-0.5 bg-exo-black'
: 'left-0.5 bg-exo-light-gray'}"
></div>
</button>
</div>
<!-- Partial Images (only when streaming) -->
{#if params.stream}
<div class="flex items-center gap-1.5">
<span class="text-xs text-exo-light-gray uppercase tracking-wider"
>PARTIALS:</span
>
<input
type="number"
min="0"
value={params.partialImages}
oninput={handlePartialImagesChange}
class="w-12 bg-exo-medium-gray/50 border border-exo-yellow/30 rounded px-2 py-1 text-xs font-mono text-exo-yellow text-center transition-all duration-200 hover:border-exo-yellow/50 focus:outline-none focus:border-exo-yellow/70"
/>
</div>
{/if}
<!-- Input Fidelity (edit mode only) -->
{#if isEditMode}
<div class="flex items-center gap-1.5">
@@ -493,7 +590,50 @@
</div>
</div>
<!-- Row 3: Negative Prompt -->
<!-- Row 3: Sync Steps -->
<div class="flex items-center gap-1.5">
<span
class="text-xs text-exo-light-gray uppercase tracking-wider whitespace-nowrap"
>SYNC STEPS:</span
>
<div class="flex items-center gap-2 flex-1 max-w-xs">
<input
type="range"
min="1"
max="100"
value={params.numSyncSteps ?? 1}
oninput={handleNumSyncStepsChange}
class="flex-1 h-1 bg-exo-medium-gray/50 rounded appearance-none cursor-pointer accent-exo-yellow"
/>
<span class="text-xs font-mono text-exo-yellow w-8 text-right">
{params.numSyncSteps ?? "--"}
</span>
{#if params.numSyncSteps !== null}
<button
type="button"
onclick={clearNumSyncSteps}
class="text-exo-light-gray hover:text-exo-yellow transition-colors"
title="Clear"
>
<svg
class="w-3 h-3"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M6 18L18 6M6 6l12 12"
/>
</svg>
</button>
{/if}
</div>
</div>
<!-- Row 4: Negative Prompt -->
<div class="flex flex-col gap-1.5">
<span class="text-xs text-exo-light-gray uppercase tracking-wider"
>NEGATIVE PROMPT:</span
+10 -3
View File
@@ -422,9 +422,16 @@
const bToACandidates: Array<{ ip: string; iface: string | null }> = [];
for (const edge of topology.edges) {
const ip = edge.sendBackIp || "?";
const iface =
edge.sendBackInterface || getInterfaceForIp(edge.source, ip);
let ip: string;
let iface: string | null;
if (edge.sourceRdmaIface || edge.sinkRdmaIface) {
ip = "RDMA";
iface = `${edge.sourceRdmaIface || "?"} \u2192 ${edge.sinkRdmaIface || "?"}`;
} else {
ip = edge.sendBackIp || "?";
iface = edge.sendBackInterface || getInterfaceForIp(edge.source, ip);
}
if (edge.source === nodeId1 && edge.target === nodeId2) {
aToBCandidates.push({ ip, iface });
@@ -0,0 +1,254 @@
<script lang="ts">
import { fly } from "svelte/transition";
import { cubicOut } from "svelte/easing";
interface FilterState {
capabilities: string[];
sizeRange: { min: number; max: number } | null;
downloadedOnly: boolean;
}
type ModelFilterPopoverProps = {
filters: FilterState;
onChange: (filters: FilterState) => void;
onClear: () => void;
onClose: () => void;
};
let { filters, onChange, onClear, onClose }: ModelFilterPopoverProps =
$props();
// Available capabilities
const availableCapabilities = [
{ id: "text", label: "Text" },
{ id: "thinking", label: "Thinking" },
{ id: "code", label: "Code" },
{ id: "vision", label: "Vision" },
{ id: "image_gen", label: "Image Gen" },
{ id: "image_edit", label: "Image Edit" },
];
// Size ranges
const sizeRanges = [
{ label: "< 10GB", min: 0, max: 10 },
{ label: "10-50GB", min: 10, max: 50 },
{ label: "50-200GB", min: 50, max: 200 },
{ label: "> 200GB", min: 200, max: 10000 },
];
function toggleCapability(cap: string) {
const next = filters.capabilities.includes(cap)
? filters.capabilities.filter((c) => c !== cap)
: [...filters.capabilities, cap];
onChange({ ...filters, capabilities: next });
}
function selectSizeRange(range: { min: number; max: number } | null) {
// Toggle off if same range is clicked
if (
filters.sizeRange &&
range &&
filters.sizeRange.min === range.min &&
filters.sizeRange.max === range.max
) {
onChange({ ...filters, sizeRange: null });
} else {
onChange({ ...filters, sizeRange: range });
}
}
function handleClickOutside(e: MouseEvent) {
const target = e.target as HTMLElement;
if (
!target.closest(".filter-popover") &&
!target.closest(".filter-toggle")
) {
onClose();
}
}
</script>
<svelte:window onclick={handleClickOutside} />
<!-- svelte-ignore a11y_no_static_element_interactions -->
<div
class="filter-popover absolute right-0 top-full mt-2 w-64 bg-exo-dark-gray border border-exo-yellow/10 rounded-lg shadow-xl z-10"
transition:fly={{ y: -10, duration: 200, easing: cubicOut }}
onclick={(e) => e.stopPropagation()}
role="dialog"
aria-label="Filter options"
>
<div class="p-3 space-y-4">
<!-- Capabilities -->
<div>
<h4 class="text-xs font-mono text-white/50 mb-2">Capabilities</h4>
<div class="flex flex-wrap gap-1.5">
{#each availableCapabilities as cap}
{@const isSelected = filters.capabilities.includes(cap.id)}
<button
type="button"
class="px-2 py-1 text-xs font-mono rounded transition-colors {isSelected
? 'bg-exo-yellow/20 text-exo-yellow border border-exo-yellow/30'
: 'bg-white/5 text-white/60 hover:bg-white/10 border border-transparent'}"
onclick={() => toggleCapability(cap.id)}
>
{#if cap.id === "text"}
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
><path
d="M21 15a2 2 0 0 1-2 2H7l-4 4V5a2 2 0 0 1 2-2h14a2 2 0 0 1 2 2z"
stroke-linecap="round"
stroke-linejoin="round"
/></svg
>
{:else if cap.id === "thinking"}
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
><path
d="M12 2a7 7 0 0 0-7 7c0 2.38 1.19 4.47 3 5.74V17a1 1 0 0 0 1 1h6a1 1 0 0 0 1-1v-2.26c1.81-1.27 3-3.36 3-5.74a7 7 0 0 0-7-7zM9 20h6M10 22h4"
stroke-linecap="round"
stroke-linejoin="round"
/></svg
>
{:else if cap.id === "code"}
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
><path
d="M16 18l6-6-6-6M8 6l-6 6 6 6"
stroke-linecap="round"
stroke-linejoin="round"
/></svg
>
{:else if cap.id === "vision"}
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
><path
d="M1 12s4-8 11-8 11 8 11 8-4 8-11 8-11-8-11-8z"
stroke-linecap="round"
stroke-linejoin="round"
/><circle cx="12" cy="12" r="3" /></svg
>
{:else if cap.id === "image_gen"}
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
><rect
x="3"
y="3"
width="18"
height="18"
rx="2"
ry="2"
stroke-linecap="round"
stroke-linejoin="round"
/><circle cx="8.5" cy="8.5" r="1.5" /><path
d="M21 15l-5-5L5 21"
stroke-linecap="round"
stroke-linejoin="round"
/></svg
>
{:else if cap.id === "image_edit"}
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
><path
d="M11 4H4a2 2 0 0 0-2 2v14a2 2 0 0 0 2 2h14a2 2 0 0 0 2-2v-7"
stroke-linecap="round"
stroke-linejoin="round"
/><path
d="M18.5 2.5a2.121 2.121 0 0 1 3 3L12 15l-4 1 1-4 9.5-9.5z"
stroke-linecap="round"
stroke-linejoin="round"
/></svg
>
{/if}
<span class="ml-1">{cap.label}</span>
</button>
{/each}
</div>
</div>
<!-- Downloaded only -->
<div>
<h4 class="text-xs font-mono text-white/50 mb-2">Availability</h4>
<button
type="button"
class="px-2 py-1 text-xs font-mono rounded transition-colors {filters.downloadedOnly
? 'bg-green-500/20 text-green-400 border border-green-500/30'
: 'bg-white/5 text-white/60 hover:bg-white/10 border border-transparent'}"
onclick={() =>
onChange({ ...filters, downloadedOnly: !filters.downloadedOnly })}
>
<svg
class="w-3.5 h-3.5 inline-block"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
stroke-linecap="round"
stroke-linejoin="round"
>
<path
class="text-white/40"
d="M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z"
/>
<path class="text-green-400" d="m9 13 2 2 4-4" />
</svg>
<span class="ml-1">Downloaded</span>
</button>
</div>
<!-- Size range -->
<div>
<h4 class="text-xs font-mono text-white/50 mb-2">Model Size</h4>
<div class="flex flex-wrap gap-1.5">
{#each sizeRanges as range}
{@const isSelected =
filters.sizeRange &&
filters.sizeRange.min === range.min &&
filters.sizeRange.max === range.max}
<button
type="button"
class="px-2 py-1 text-xs font-mono rounded transition-colors {isSelected
? 'bg-exo-yellow/20 text-exo-yellow border border-exo-yellow/30'
: 'bg-white/5 text-white/60 hover:bg-white/10 border border-transparent'}"
onclick={() => selectSizeRange(range)}
>
{range.label}
</button>
{/each}
</div>
</div>
<!-- Clear button -->
<button
type="button"
class="w-full py-1.5 text-xs font-mono text-white/50 hover:text-white/70 hover:bg-white/5 rounded transition-colors"
onclick={onClear}
>
Clear all filters
</button>
</div>
</div>
@@ -0,0 +1,497 @@
<script lang="ts">
interface ModelInfo {
id: string;
name?: string;
storage_size_megabytes?: number;
base_model?: string;
quantization?: string;
supports_tensor?: boolean;
capabilities?: string[];
family?: string;
is_custom?: boolean;
}
interface ModelGroup {
id: string;
name: string;
capabilities: string[];
family: string;
variants: ModelInfo[];
smallestVariant: ModelInfo;
hasMultipleVariants: boolean;
}
type DownloadAvailability = {
available: boolean;
nodeNames: string[];
nodeIds: string[];
};
type ModelFitStatus = "fits_now" | "fits_cluster_capacity" | "too_large";
type ModelPickerGroupProps = {
group: ModelGroup;
isExpanded: boolean;
isFavorite: boolean;
selectedModelId: string | null;
canModelFit: (id: string) => boolean;
getModelFitStatus: (id: string) => ModelFitStatus;
onToggleExpand: () => void;
onSelectModel: (modelId: string) => void;
onToggleFavorite: (baseModelId: string) => void;
onShowInfo: (group: ModelGroup) => void;
downloadStatusMap?: Map<string, DownloadAvailability>;
launchedAt?: number;
};
let {
group,
isExpanded,
isFavorite,
selectedModelId,
canModelFit,
getModelFitStatus,
onToggleExpand,
onSelectModel,
onToggleFavorite,
onShowInfo,
downloadStatusMap,
launchedAt,
}: ModelPickerGroupProps = $props();
// Group-level download status: show if any variant is downloaded
const groupDownloadStatus = $derived.by(() => {
if (!downloadStatusMap || downloadStatusMap.size === 0) return undefined;
// Return the first available entry (prefer "available" ones)
for (const avail of downloadStatusMap.values()) {
if (avail.available) return avail;
}
return downloadStatusMap.values().next().value;
});
// Format storage size
function formatSize(mb: number | undefined): string {
if (!mb) return "";
if (mb >= 1024) {
return `${(mb / 1024).toFixed(0)}GB`;
}
return `${mb}MB`;
}
function timeAgo(ts: number): string {
const seconds = Math.floor((Date.now() - ts) / 1000);
if (seconds < 60) return "just now";
const minutes = Math.floor(seconds / 60);
if (minutes < 60) return `${minutes}m ago`;
const hours = Math.floor(minutes / 60);
if (hours < 24) return `${hours}h ago`;
const days = Math.floor(hours / 24);
return `${days}d ago`;
}
// Check if any variant can fit
const anyVariantFits = $derived(
group.variants.some((v) => canModelFit(v.id)),
);
const groupFitStatus = $derived.by((): ModelFitStatus => {
let hasClusterCapacityOnly = false;
for (const variant of group.variants) {
const fitStatus = getModelFitStatus(variant.id);
if (fitStatus === "fits_now") {
return "fits_now";
}
if (fitStatus === "fits_cluster_capacity") {
hasClusterCapacityOnly = true;
}
}
return hasClusterCapacityOnly ? "fits_cluster_capacity" : "too_large";
});
function getSizeClassForFitStatus(fitStatus: ModelFitStatus): string {
switch (fitStatus) {
case "fits_now":
return "text-white/40";
case "fits_cluster_capacity":
return "text-orange-400/80";
case "too_large":
return "text-red-400/70";
}
}
// Check if this group's model is currently selected (for single-variant groups)
const isMainSelected = $derived(
!group.hasMultipleVariants &&
group.variants.some((v) => v.id === selectedModelId),
);
</script>
<div
class="border-b border-white/5 last:border-b-0 {!anyVariantFits
? 'opacity-50'
: ''}"
>
<!-- Main row -->
<div
class="flex items-center gap-2 px-3 py-2.5 transition-colors {anyVariantFits
? 'hover:bg-white/5 cursor-pointer'
: 'cursor-not-allowed'} {isMainSelected
? 'bg-exo-yellow/10 border-l-2 border-exo-yellow'
: 'border-l-2 border-transparent'}"
onclick={() => {
if (group.hasMultipleVariants) {
onToggleExpand();
} else {
const modelId = group.variants[0]?.id;
if (modelId && canModelFit(modelId)) {
onSelectModel(modelId);
}
}
}}
role="button"
tabindex="0"
onkeydown={(e) => {
if (e.key === "Enter" || e.key === " ") {
e.preventDefault();
if (group.hasMultipleVariants) {
onToggleExpand();
} else {
const modelId = group.variants[0]?.id;
if (modelId && canModelFit(modelId)) {
onSelectModel(modelId);
}
}
}
}}
>
<!-- Expand/collapse chevron (for groups with variants) -->
{#if group.hasMultipleVariants}
<svg
class="w-4 h-4 text-white/40 transition-transform duration-200 flex-shrink-0 {isExpanded
? 'rotate-90'
: ''}"
viewBox="0 0 24 24"
fill="currentColor"
>
<path d="M8.59 16.59L13.17 12 8.59 7.41 10 6l6 6-6 6-1.41-1.41z" />
</svg>
{:else}
<div class="w-4 flex-shrink-0"></div>
{/if}
<!-- Model name -->
<div class="flex-1 min-w-0">
<div class="flex items-center gap-2">
<span class="font-mono text-sm text-white truncate">
{group.name}
</span>
<!-- Capability icons -->
{#each group.capabilities.filter((c) => c !== "text") as cap}
{#if cap === "thinking"}
<svg
class="w-3.5 h-3.5 text-white/40 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
title="Supports Thinking"
>
<path
d="M12 2a7 7 0 0 0-7 7c0 2.38 1.19 4.47 3 5.74V17a1 1 0 0 0 1 1h6a1 1 0 0 0 1-1v-2.26c1.81-1.27 3-3.36 3-5.74a7 7 0 0 0-7-7zM9 20h6M10 22h4"
stroke-linecap="round"
stroke-linejoin="round"
/>
</svg>
{:else if cap === "code"}
<svg
class="w-3.5 h-3.5 text-white/40 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
title="Supports code generation"
>
<path
d="M16 18l6-6-6-6M8 6l-6 6 6 6"
stroke-linecap="round"
stroke-linejoin="round"
/>
</svg>
{:else if cap === "vision"}
<svg
class="w-3.5 h-3.5 text-white/40 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
title="Supports image input"
>
<path
d="M1 12s4-8 11-8 11 8 11 8-4 8-11 8-11-8-11-8z"
stroke-linecap="round"
stroke-linejoin="round"
/>
<circle cx="12" cy="12" r="3" />
</svg>
{:else if cap === "image_gen"}
<svg
class="w-3.5 h-3.5 text-white/40 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
title="Supports image generation"
>
<rect
x="3"
y="3"
width="18"
height="18"
rx="2"
ry="2"
stroke-linecap="round"
stroke-linejoin="round"
/>
<circle cx="8.5" cy="8.5" r="1.5" />
<path
d="M21 15l-5-5L5 21"
stroke-linecap="round"
stroke-linejoin="round"
/>
</svg>
{:else if cap === "image_edit"}
<svg
class="w-3.5 h-3.5 text-white/40 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="1.5"
title="Supports image editing"
>
<path
d="M11 4H4a2 2 0 0 0-2 2v14a2 2 0 0 0 2 2h14a2 2 0 0 0 2-2v-7"
stroke-linecap="round"
stroke-linejoin="round"
/>
<path
d="M18.5 2.5a2.121 2.121 0 0 1 3 3L12 15l-4 1 1-4 9.5-9.5z"
stroke-linecap="round"
stroke-linejoin="round"
/>
</svg>
{/if}
{/each}
</div>
</div>
<!-- Size indicator (smallest variant) -->
{#if !group.hasMultipleVariants && group.smallestVariant?.storage_size_megabytes}
{@const singleVariantFitStatus = getModelFitStatus(
group.smallestVariant.id,
)}
<span
class="text-xs font-mono flex-shrink-0 {getSizeClassForFitStatus(
singleVariantFitStatus,
)}"
>
{formatSize(group.smallestVariant.storage_size_megabytes)}
</span>
{/if}
<!-- Variant count with size range -->
{#if group.hasMultipleVariants}
{@const sizes = group.variants
.map((v) => v.storage_size_megabytes || 0)
.filter((s) => s > 0)
.sort((a, b) => a - b)}
<span
class="text-xs font-mono flex-shrink-0 {getSizeClassForFitStatus(
groupFitStatus,
)}"
>
{group.variants.length} variants{#if sizes.length >= 2}{" "}({formatSize(
sizes[0],
)}-{formatSize(sizes[sizes.length - 1])}){/if}
</span>
{/if}
<!-- Time ago (for recent models) -->
{#if launchedAt}
<span class="text-xs font-mono text-white/20 flex-shrink-0">
{timeAgo(launchedAt)}
</span>
{/if}
<!-- Download availability indicator -->
{#if groupDownloadStatus && groupDownloadStatus.nodeIds.length > 0}
<span
class="flex-shrink-0"
title={groupDownloadStatus.available
? `Ready — downloaded on ${groupDownloadStatus.nodeNames.join(", ")}`
: `Downloaded on ${groupDownloadStatus.nodeNames.join(", ")} (may need more nodes)`}
>
<svg
class="w-4 h-4"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
stroke-linecap="round"
stroke-linejoin="round"
>
<path
class="text-white/40"
d="M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z"
/>
<path class="text-green-400" d="m9 13 2 2 4-4" />
</svg>
</span>
{/if}
<!-- Check mark if selected (single-variant) -->
{#if isMainSelected}
<svg
class="w-4 h-4 text-exo-yellow flex-shrink-0"
viewBox="0 0 24 24"
fill="currentColor"
>
<path d="M9 16.17L4.83 12l-1.42 1.41L9 19 21 7l-1.41-1.41L9 16.17z" />
</svg>
{/if}
<!-- Favorite star -->
<button
type="button"
class="p-1 rounded hover:bg-white/10 transition-colors flex-shrink-0"
onclick={(e) => {
e.stopPropagation();
onToggleFavorite(group.id);
}}
title={isFavorite ? "Remove from favorites" : "Add to favorites"}
>
{#if isFavorite}
<svg
class="w-4 h-4 text-amber-400"
viewBox="0 0 24 24"
fill="currentColor"
>
<path
d="M12 2l3.09 6.26L22 9.27l-5 4.87 1.18 6.88L12 17.77l-6.18 3.25L7 14.14 2 9.27l6.91-1.01L12 2z"
/>
</svg>
{:else}
<svg
class="w-4 h-4 text-white/30 hover:text-white/50"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
>
<path
d="M12 2l3.09 6.26L22 9.27l-5 4.87 1.18 6.88L12 17.77l-6.18 3.25L7 14.14 2 9.27l6.91-1.01L12 2z"
/>
</svg>
{/if}
</button>
<!-- Info button -->
<button
type="button"
class="p-1 rounded hover:bg-white/10 transition-colors flex-shrink-0"
onclick={(e) => {
e.stopPropagation();
onShowInfo(group);
}}
title="View model details"
>
<svg
class="w-4 h-4 text-white/30 hover:text-white/50"
viewBox="0 0 24 24"
fill="currentColor"
>
<path
d="M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm1 15h-2v-6h2v6zm0-8h-2V7h2v2z"
/>
</svg>
</button>
</div>
<!-- Expanded variants -->
{#if isExpanded && group.hasMultipleVariants}
<div class="bg-black/20 border-t border-white/5">
{#each group.variants as variant}
{@const fitStatus = getModelFitStatus(variant.id)}
{@const modelCanFit = canModelFit(variant.id)}
{@const isSelected = selectedModelId === variant.id}
<button
type="button"
class="w-full flex items-center gap-3 px-3 py-2 pl-10 hover:bg-white/5 transition-colors text-left {!modelCanFit
? 'opacity-50 cursor-not-allowed'
: 'cursor-pointer'} {isSelected
? 'bg-exo-yellow/10 border-l-2 border-exo-yellow'
: 'border-l-2 border-transparent'}"
disabled={!modelCanFit}
onclick={() => {
if (modelCanFit) {
onSelectModel(variant.id);
}
}}
>
<!-- Quantization badge -->
<span
class="text-xs font-mono px-1.5 py-0.5 rounded bg-white/10 text-white/70 flex-shrink-0"
>
{variant.quantization || "default"}
</span>
<!-- Size -->
<span
class="text-xs font-mono flex-1 {getSizeClassForFitStatus(
fitStatus,
)}"
>
{formatSize(variant.storage_size_megabytes)}
</span>
<!-- Download indicator for this variant -->
{#if downloadStatusMap?.get(variant.id)}
{@const variantDl = downloadStatusMap.get(variant.id)}
{#if variantDl}
<span
class="flex-shrink-0"
title={`Downloaded on ${variantDl.nodeNames.join(", ")}`}
>
<svg
class="w-3.5 h-3.5"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
stroke-linecap="round"
stroke-linejoin="round"
>
<path
class="text-white/40"
d="M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z"
/>
<path class="text-green-400" d="m9 13 2 2 4-4" />
</svg>
</span>
{/if}
{/if}
<!-- Check mark if selected -->
{#if isSelected}
<svg
class="w-4 h-4 text-exo-yellow"
viewBox="0 0 24 24"
fill="currentColor"
>
<path
d="M9 16.17L4.83 12l-1.42 1.41L9 19 21 7l-1.41-1.41L9 16.17z"
/>
</svg>
{/if}
</button>
{/each}
</div>
{/if}
</div>
@@ -0,0 +1,990 @@
<script lang="ts">
import { fade, fly } from "svelte/transition";
import { cubicOut } from "svelte/easing";
import FamilySidebar from "./FamilySidebar.svelte";
import ModelPickerGroup from "./ModelPickerGroup.svelte";
import ModelFilterPopover from "./ModelFilterPopover.svelte";
import HuggingFaceResultItem from "./HuggingFaceResultItem.svelte";
import { getNodesWithModelDownloaded } from "$lib/utils/downloads";
import { getRecentEntries } from "$lib/stores/recents.svelte";
interface ModelInfo {
id: string;
name?: string;
storage_size_megabytes?: number;
base_model?: string;
quantization?: string;
supports_tensor?: boolean;
capabilities?: string[];
family?: string;
is_custom?: boolean;
tasks?: string[];
hugging_face_id?: string;
}
interface ModelGroup {
id: string;
name: string;
capabilities: string[];
family: string;
variants: ModelInfo[];
smallestVariant: ModelInfo;
hasMultipleVariants: boolean;
}
interface FilterState {
capabilities: string[];
sizeRange: { min: number; max: number } | null;
downloadedOnly: boolean;
}
interface HuggingFaceModel {
id: string;
author: string;
downloads: number;
likes: number;
last_modified: string;
tags: string[];
}
type ModelFitStatus = "fits_now" | "fits_cluster_capacity" | "too_large";
type ModelPickerModalProps = {
isOpen: boolean;
models: ModelInfo[];
selectedModelId: string | null;
favorites: Set<string>;
recentModelIds?: string[];
hasRecents?: boolean;
existingModelIds: Set<string>;
canModelFit: (modelId: string) => boolean;
getModelFitStatus: (modelId: string) => ModelFitStatus;
onSelect: (modelId: string) => void;
onClose: () => void;
onToggleFavorite: (baseModelId: string) => void;
onAddModel: (modelId: string) => Promise<void>;
onDeleteModel: (modelId: string) => Promise<void>;
totalMemoryGB: number;
usedMemoryGB: number;
downloadsData?: Record<string, unknown[]>;
topologyNodes?: Record<
string,
{
friendly_name?: string;
system_info?: { model_id?: string };
macmon_info?: { memory?: { ram_total?: number } };
}
>;
};
let {
isOpen,
models,
selectedModelId,
favorites,
recentModelIds = [],
hasRecents: hasRecentsTab = false,
existingModelIds,
canModelFit,
getModelFitStatus,
onSelect,
onClose,
onToggleFavorite,
onAddModel,
onDeleteModel,
totalMemoryGB,
usedMemoryGB,
downloadsData,
topologyNodes,
}: ModelPickerModalProps = $props();
// Local state
let searchQuery = $state("");
let selectedFamily = $state<string | null>(null);
let expandedGroups = $state<Set<string>>(new Set());
let showFilters = $state(false);
let filters = $state<FilterState>({
capabilities: [],
sizeRange: null,
downloadedOnly: false,
});
let infoGroup = $state<ModelGroup | null>(null);
// Download availability per model group
type DownloadAvailability = {
available: boolean;
nodeNames: string[];
nodeIds: string[];
};
function getNodeName(nodeId: string): string {
const node = topologyNodes?.[nodeId];
return (
node?.friendly_name || node?.system_info?.model_id || nodeId.slice(0, 8)
);
}
const modelDownloadAvailability = $derived.by(() => {
const result = new Map<string, DownloadAvailability>();
if (!downloadsData || !topologyNodes) return result;
for (const model of models) {
const nodeIds = getNodesWithModelDownloaded(downloadsData, model.id);
if (nodeIds.length === 0) continue;
// Sum total RAM across nodes that have the model
let totalRamBytes = 0;
for (const nodeId of nodeIds) {
const ramTotal = topologyNodes[nodeId]?.macmon_info?.memory?.ram_total;
if (typeof ramTotal === "number") totalRamBytes += ramTotal;
}
const modelSizeBytes = (model.storage_size_megabytes || 0) * 1024 * 1024;
result.set(model.id, {
available: modelSizeBytes > 0 && totalRamBytes >= modelSizeBytes,
nodeNames: nodeIds.map(getNodeName),
nodeIds,
});
}
return result;
});
// Aggregate download availability per group (available if ANY variant is available)
function getGroupDownloadAvailability(
group: ModelGroup,
): DownloadAvailability | undefined {
for (const variant of group.variants) {
const avail = modelDownloadAvailability.get(variant.id);
if (avail && avail.nodeIds.length > 0) return avail;
}
return undefined;
}
// Get per-variant download map for a group
function getVariantDownloadMap(
group: ModelGroup,
): Map<string, DownloadAvailability> {
const map = new Map<string, DownloadAvailability>();
for (const variant of group.variants) {
const avail = modelDownloadAvailability.get(variant.id);
if (avail && avail.nodeIds.length > 0) map.set(variant.id, avail);
}
return map;
}
// HuggingFace Hub state
let hfSearchQuery = $state("");
let hfSearchResults = $state<HuggingFaceModel[]>([]);
let hfTrendingModels = $state<HuggingFaceModel[]>([]);
let hfIsSearching = $state(false);
let hfIsLoadingTrending = $state(false);
let addingModelId = $state<string | null>(null);
let hfSearchDebounceTimer: ReturnType<typeof setTimeout> | null = null;
let manualModelId = $state("");
let addModelError = $state<string | null>(null);
// Reset transient state when modal opens, but preserve tab selection
$effect(() => {
if (isOpen) {
searchQuery = "";
expandedGroups = new Set();
showFilters = false;
manualModelId = "";
addModelError = null;
}
});
// Fetch trending models when HuggingFace is selected
$effect(() => {
if (
selectedFamily === "huggingface" &&
hfTrendingModels.length === 0 &&
!hfIsLoadingTrending
) {
fetchTrendingModels();
}
});
async function fetchTrendingModels() {
hfIsLoadingTrending = true;
try {
const response = await fetch("/models/search?query=&limit=20");
if (response.ok) {
hfTrendingModels = await response.json();
}
} catch (error) {
console.error("Failed to fetch trending models:", error);
} finally {
hfIsLoadingTrending = false;
}
}
async function searchHuggingFace(query: string) {
if (query.length < 2) {
hfSearchResults = [];
return;
}
hfIsSearching = true;
try {
const response = await fetch(
`/models/search?query=${encodeURIComponent(query)}&limit=20`,
);
if (response.ok) {
hfSearchResults = await response.json();
} else {
hfSearchResults = [];
}
} catch (error) {
console.error("Failed to search models:", error);
hfSearchResults = [];
} finally {
hfIsSearching = false;
}
}
function handleHfSearchInput(query: string) {
hfSearchQuery = query;
addModelError = null;
if (hfSearchDebounceTimer) {
clearTimeout(hfSearchDebounceTimer);
}
if (query.length >= 2) {
hfSearchDebounceTimer = setTimeout(() => {
searchHuggingFace(query);
}, 300);
} else {
hfSearchResults = [];
}
}
async function handleAddModel(modelId: string) {
addingModelId = modelId;
addModelError = null;
try {
await onAddModel(modelId);
} catch (error) {
addModelError =
error instanceof Error ? error.message : "Failed to add model";
} finally {
addingModelId = null;
}
}
async function handleAddManualModel() {
if (!manualModelId.trim()) return;
await handleAddModel(manualModelId.trim());
if (!addModelError) {
manualModelId = "";
}
}
function handleSelectHfModel(modelId: string) {
onSelect(modelId);
onClose();
}
// Models to display in HuggingFace view
const hfDisplayModels = $derived.by((): HuggingFaceModel[] => {
if (hfSearchQuery.length >= 2) {
return hfSearchResults;
}
return hfTrendingModels;
});
// Group models by base_model
const groupedModels = $derived.by((): ModelGroup[] => {
const groups = new Map<string, ModelGroup>();
for (const model of models) {
const groupId = model.base_model || model.id;
const groupName = model.base_model || model.name || model.id;
if (!groups.has(groupId)) {
groups.set(groupId, {
id: groupId,
name: groupName,
capabilities: model.capabilities || ["text"],
family: model.family || "",
variants: [],
smallestVariant: model,
hasMultipleVariants: false,
});
}
const group = groups.get(groupId)!;
group.variants.push(model);
// Track smallest variant
if (
(model.storage_size_megabytes || 0) <
(group.smallestVariant.storage_size_megabytes || Infinity)
) {
group.smallestVariant = model;
}
// Update capabilities if not set
if (
group.capabilities.length <= 1 &&
model.capabilities &&
model.capabilities.length > 1
) {
group.capabilities = model.capabilities;
}
if (!group.family && model.family) {
group.family = model.family;
}
}
// Sort variants within each group by size
for (const group of groups.values()) {
group.variants.sort(
(a, b) =>
(a.storage_size_megabytes || 0) - (b.storage_size_megabytes || 0),
);
group.hasMultipleVariants = group.variants.length > 1;
}
// Convert to array and sort by smallest variant size (biggest first)
return Array.from(groups.values()).sort((a, b) => {
return (
(b.smallestVariant.storage_size_megabytes || 0) -
(a.smallestVariant.storage_size_megabytes || 0)
);
});
});
// Get unique families
const uniqueFamilies = $derived.by((): string[] => {
const families = new Set<string>();
for (const group of groupedModels) {
if (group.family) {
families.add(group.family);
}
}
const familyOrder = [
"kimi",
"qwen",
"glm",
"minimax",
"deepseek",
"gpt-oss",
"llama",
"flux",
"qwen-image",
];
return Array.from(families).sort((a, b) => {
const aIdx = familyOrder.indexOf(a);
const bIdx = familyOrder.indexOf(b);
if (aIdx === -1 && bIdx === -1) return a.localeCompare(b);
if (aIdx === -1) return 1;
if (bIdx === -1) return -1;
return aIdx - bIdx;
});
});
// Filter models based on search, family, and filters
const filteredGroups = $derived.by((): ModelGroup[] => {
let result: ModelGroup[] = [...groupedModels];
// Filter by family
if (selectedFamily === "favorites") {
result = result.filter((g) => favorites.has(g.id));
} else if (
selectedFamily &&
selectedFamily !== "huggingface" &&
selectedFamily !== "recents"
) {
result = result.filter((g) => g.family === selectedFamily);
}
// Filter by search query
if (searchQuery.trim()) {
const query = searchQuery.toLowerCase().trim();
result = result.filter(
(g) =>
g.name.toLowerCase().includes(query) ||
g.variants.some(
(v) =>
v.id.toLowerCase().includes(query) ||
(v.name || "").toLowerCase().includes(query),
),
);
}
// Filter by capabilities
if (filters.capabilities.length > 0) {
result = result.filter((g) =>
filters.capabilities.every((cap) => g.capabilities.includes(cap)),
);
}
// Filter by size range
if (filters.sizeRange) {
const { min, max } = filters.sizeRange;
result = result.filter((g) => {
const sizeGB = (g.smallestVariant.storage_size_megabytes || 0) / 1024;
return sizeGB >= min && sizeGB <= max;
});
}
// Filter to downloaded models only
if (filters.downloadedOnly) {
result = result.filter((g) =>
g.variants.some((v) => {
const avail = modelDownloadAvailability.get(v.id);
return avail && avail.nodeIds.length > 0;
}),
);
}
// Sort: fits-now first, then fits-cluster-capacity, then too-large
result.sort((a, b) => {
const getGroupFitRank = (group: ModelGroup): number => {
let hasClusterCapacityOnly = false;
for (const variant of group.variants) {
const fitStatus = getModelFitStatus(variant.id);
if (fitStatus === "fits_now") return 0;
if (fitStatus === "fits_cluster_capacity") {
hasClusterCapacityOnly = true;
}
}
return hasClusterCapacityOnly ? 1 : 2;
};
const aRank = getGroupFitRank(a);
const bRank = getGroupFitRank(b);
if (aRank !== bRank) return aRank - bRank;
return (
(b.smallestVariant.storage_size_megabytes || 0) -
(a.smallestVariant.storage_size_megabytes || 0)
);
});
return result;
});
// Check if any favorites exist
const hasFavorites = $derived(favorites.size > 0);
// Timestamp lookup for recent models
const recentTimestamps = $derived(
new Map(getRecentEntries().map((e) => [e.modelId, e.launchedAt])),
);
// Recent models: single-variant ModelGroups in launch order
const recentGroups = $derived.by((): ModelGroup[] => {
if (!recentModelIds || recentModelIds.length === 0) return [];
const result: ModelGroup[] = [];
for (const id of recentModelIds) {
const model = models.find((m) => m.id === id);
if (model) {
result.push({
id: model.base_model || model.id,
name: model.name || model.id,
capabilities: model.capabilities || ["text"],
family: model.family || "",
variants: [model],
smallestVariant: model,
hasMultipleVariants: false,
});
}
}
return result;
});
// Filtered recent groups (apply search query)
const filteredRecentGroups = $derived.by((): ModelGroup[] => {
if (!searchQuery.trim()) return recentGroups;
const query = searchQuery.toLowerCase().trim();
return recentGroups.filter(
(g) =>
g.name.toLowerCase().includes(query) ||
g.variants.some(
(v) =>
v.id.toLowerCase().includes(query) ||
(v.name || "").toLowerCase().includes(query) ||
(v.quantization || "").toLowerCase().includes(query),
),
);
});
function toggleGroupExpanded(groupId: string) {
const next = new Set(expandedGroups);
if (next.has(groupId)) {
next.delete(groupId);
} else {
next.add(groupId);
}
expandedGroups = next;
}
function handleSelect(modelId: string) {
onSelect(modelId);
onClose();
}
function handleKeydown(e: KeyboardEvent) {
if (e.key === "Escape") {
onClose();
}
}
function handleFiltersChange(newFilters: FilterState) {
filters = newFilters;
}
function clearFilters() {
filters = { capabilities: [], sizeRange: null, downloadedOnly: false };
}
const hasActiveFilters = $derived(
filters.capabilities.length > 0 ||
filters.sizeRange !== null ||
filters.downloadedOnly,
);
</script>
<svelte:window onkeydown={handleKeydown} />
{#if isOpen}
<!-- Backdrop -->
<div
class="fixed inset-0 z-50 bg-black/80 backdrop-blur-sm"
transition:fade={{ duration: 200 }}
onclick={onClose}
role="presentation"
></div>
<!-- Modal -->
<div
class="fixed z-50 top-1/2 left-1/2 -translate-x-1/2 -translate-y-1/2 w-[min(90vw,600px)] h-[min(80vh,700px)] bg-exo-dark-gray border border-exo-yellow/10 rounded-lg shadow-2xl overflow-hidden flex flex-col"
transition:fly={{ y: 20, duration: 300, easing: cubicOut }}
role="dialog"
aria-modal="true"
aria-label="Select a model"
>
<!-- Header with search -->
<div
class="flex items-center gap-2 p-3 border-b border-exo-yellow/10 bg-exo-medium-gray/30"
>
{#if selectedFamily === "huggingface"}
<!-- HuggingFace search -->
<svg
class="w-5 h-5 text-orange-400/60 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
>
<circle cx="11" cy="11" r="8" />
<path d="M21 21l-4.35-4.35" />
</svg>
<input
type="search"
class="flex-1 bg-transparent border-none outline-none text-sm font-mono text-white placeholder-white/40"
placeholder="Search mlx-community models..."
value={hfSearchQuery}
oninput={(e) => handleHfSearchInput(e.currentTarget.value)}
/>
{#if hfIsSearching}
<div class="flex-shrink-0">
<span
class="w-4 h-4 border-2 border-orange-400 border-t-transparent rounded-full animate-spin block"
></span>
</div>
{/if}
{:else}
<!-- Normal model search -->
<svg
class="w-5 h-5 text-white/40 flex-shrink-0"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
>
<circle cx="11" cy="11" r="8" />
<path d="M21 21l-4.35-4.35" />
</svg>
<input
type="search"
class="flex-1 bg-transparent border-none outline-none text-sm font-mono text-white placeholder-white/40"
placeholder="Search models..."
bind:value={searchQuery}
/>
<!-- Cluster memory -->
<span
class="text-xs font-mono flex-shrink-0"
title="Cluster memory usage"
><span class="text-exo-yellow">{Math.round(usedMemoryGB)}GB</span
><span class="text-white/40">/{Math.round(totalMemoryGB)}GB</span
></span
>
<!-- Filter button -->
<div class="relative filter-toggle">
<button
type="button"
class="p-1.5 rounded hover:bg-white/10 transition-colors {hasActiveFilters
? 'text-exo-yellow'
: 'text-white/50'}"
onclick={() => (showFilters = !showFilters)}
title="Filter by capability or size"
>
<svg class="w-5 h-5" viewBox="0 0 24 24" fill="currentColor">
<path d="M10 18h4v-2h-4v2zM3 6v2h18V6H3zm3 7h12v-2H6v2z" />
</svg>
</button>
{#if showFilters}
<ModelFilterPopover
{filters}
onChange={handleFiltersChange}
onClear={clearFilters}
onClose={() => (showFilters = false)}
/>
{/if}
</div>
{/if}
<!-- Close button -->
<button
type="button"
class="p-1.5 rounded hover:bg-white/10 transition-colors text-white/50 hover:text-white/70"
onclick={onClose}
title="Close model picker"
>
<svg class="w-5 h-5" viewBox="0 0 24 24" fill="currentColor">
<path
d="M19 6.41L17.59 5 12 10.59 6.41 5 5 6.41 10.59 12 5 17.59 6.41 19 12 13.41 17.59 19 19 17.59 13.41 12 19 6.41z"
/>
</svg>
</button>
</div>
<!-- Body -->
<div class="flex flex-1 overflow-hidden">
<!-- Family sidebar -->
<FamilySidebar
families={uniqueFamilies}
{selectedFamily}
{hasFavorites}
hasRecents={hasRecentsTab}
onSelect={(family) => (selectedFamily = family)}
/>
<!-- Model list -->
<div class="flex-1 overflow-y-auto scrollbar-hide flex flex-col">
{#if selectedFamily === "huggingface"}
<!-- HuggingFace Hub view -->
<div class="flex-1 flex flex-col min-h-0">
<!-- Section header -->
<div
class="sticky top-0 z-10 px-3 py-2 bg-exo-dark-gray/95 border-b border-exo-yellow/10"
>
<span class="text-xs font-mono text-white/40">
{#if hfSearchQuery.length >= 2}
Search results for "{hfSearchQuery}"
{:else}
Trending on mlx-community
{/if}
</span>
</div>
<!-- Results list -->
<div class="flex-1 overflow-y-auto scrollbar-hide">
{#if hfIsLoadingTrending && hfTrendingModels.length === 0}
<div
class="flex items-center justify-center py-12 text-white/40"
>
<span
class="w-5 h-5 border-2 border-orange-400 border-t-transparent rounded-full animate-spin mr-2"
></span>
<span class="font-mono text-sm"
>Loading trending models...</span
>
</div>
{:else if hfDisplayModels.length === 0}
<div
class="flex flex-col items-center justify-center py-12 text-white/40"
>
<svg
class="w-10 h-10 mb-2"
viewBox="0 0 24 24"
fill="currentColor"
>
<path
d="M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm-2 13.5c-.83 0-1.5-.67-1.5-1.5s.67-1.5 1.5-1.5 1.5.67 1.5 1.5-.67 1.5-1.5 1.5zm4 0c-.83 0-1.5-.67-1.5-1.5s.67-1.5 1.5-1.5 1.5.67 1.5 1.5-.67 1.5-1.5 1.5zm2-4.5H8c0-2.21 1.79-4 4-4s4 1.79 4 4z"
/>
</svg>
<p class="font-mono text-sm">No models found</p>
{#if hfSearchQuery}
<p class="font-mono text-xs mt-1">
Try a different search term
</p>
{/if}
</div>
{:else}
{#each hfDisplayModels as model}
<HuggingFaceResultItem
{model}
isAdded={existingModelIds.has(model.id)}
isAdding={addingModelId === model.id}
onAdd={() => handleAddModel(model.id)}
onSelect={() => handleSelectHfModel(model.id)}
downloadedOnNodes={downloadsData
? getNodesWithModelDownloaded(
downloadsData,
model.id,
).map(getNodeName)
: []}
/>
{/each}
{/if}
</div>
<!-- Manual input footer -->
<div
class="sticky bottom-0 border-t border-exo-yellow/10 bg-exo-dark-gray p-3"
>
{#if addModelError}
<div
class="bg-red-500/10 border border-red-500/30 rounded px-3 py-2 mb-2"
>
<p class="text-red-400 text-xs font-mono break-words">
{addModelError}
</p>
</div>
{/if}
<div class="flex gap-2">
<input
type="text"
class="flex-1 bg-exo-black/60 border border-exo-yellow/30 rounded px-3 py-1.5 text-xs font-mono text-white placeholder-white/30 focus:outline-none focus:border-exo-yellow/50"
placeholder="Or paste model ID directly..."
bind:value={manualModelId}
onkeydown={(e) => {
if (e.key === "Enter") handleAddManualModel();
}}
/>
<button
type="button"
onclick={handleAddManualModel}
disabled={!manualModelId.trim() || addingModelId !== null}
class="px-3 py-1.5 text-xs font-mono tracking-wider uppercase bg-orange-500/10 text-orange-400 border border-orange-400/30 hover:bg-orange-500/20 transition-colors rounded disabled:opacity-50 disabled:cursor-not-allowed"
>
Add
</button>
</div>
</div>
</div>
{:else if selectedFamily === "recents"}
<!-- Recent models view -->
{#if filteredRecentGroups.length === 0}
<div
class="flex flex-col items-center justify-center h-full text-white/40 p-8"
>
<svg
class="w-12 h-12 mb-3"
viewBox="0 0 24 24"
fill="currentColor"
>
<path
d="M13 3a9 9 0 0 0-9 9H1l3.89 3.89.07.14L9 12H6c0-3.87 3.13-7 7-7s7 3.13 7 7-3.13 7-7 7c-1.93 0-3.68-.79-4.94-2.06l-1.42 1.42A8.954 8.954 0 0 0 13 21a9 9 0 0 0 0-18zm-1 5v5l4.28 2.54.72-1.21-3.5-2.08V8H12z"
/>
</svg>
<p class="font-mono text-sm">
{searchQuery
? "No matching recent models"
: "No recently launched models"}
</p>
</div>
{:else}
{#each filteredRecentGroups as group}
<ModelPickerGroup
{group}
isExpanded={expandedGroups.has(group.id)}
isFavorite={favorites.has(group.id)}
{selectedModelId}
{canModelFit}
{getModelFitStatus}
onToggleExpand={() => toggleGroupExpanded(group.id)}
onSelectModel={handleSelect}
{onToggleFavorite}
onShowInfo={(g) => (infoGroup = g)}
downloadStatusMap={getVariantDownloadMap(group)}
launchedAt={recentTimestamps.get(group.variants[0]?.id ?? "")}
/>
{/each}
{/if}
{:else if filteredGroups.length === 0}
<div
class="flex flex-col items-center justify-center h-full text-white/40 p-8"
>
<svg class="w-12 h-12 mb-3" viewBox="0 0 24 24" fill="currentColor">
<path
d="M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm-2 15l-5-5 1.41-1.41L10 14.17l7.59-7.59L19 8l-9 9z"
/>
</svg>
<p class="font-mono text-sm">No models found</p>
{#if hasActiveFilters || searchQuery}
<button
type="button"
class="mt-2 text-xs text-exo-yellow hover:underline"
onclick={() => {
searchQuery = "";
clearFilters();
}}
>
Clear filters
</button>
{/if}
</div>
{:else}
{#each filteredGroups as group}
<ModelPickerGroup
{group}
isExpanded={expandedGroups.has(group.id)}
isFavorite={favorites.has(group.id)}
{selectedModelId}
{canModelFit}
{getModelFitStatus}
onToggleExpand={() => toggleGroupExpanded(group.id)}
onSelectModel={handleSelect}
{onToggleFavorite}
onShowInfo={(g) => (infoGroup = g)}
downloadStatusMap={getVariantDownloadMap(group)}
/>
{/each}
{/if}
</div>
</div>
<!-- Footer with active filters indicator -->
{#if hasActiveFilters}
<div
class="flex items-center gap-2 px-3 py-2 border-t border-exo-yellow/10 bg-exo-medium-gray/20 text-xs font-mono text-white/50"
>
<span>Filters:</span>
{#each filters.capabilities as cap}
<span class="px-1.5 py-0.5 bg-exo-yellow/20 text-exo-yellow rounded"
>{cap}</span
>
{/each}
{#if filters.downloadedOnly}
<span class="px-1.5 py-0.5 bg-green-500/20 text-green-400 rounded"
>Downloaded</span
>
{/if}
{#if filters.sizeRange}
<span class="px-1.5 py-0.5 bg-exo-yellow/20 text-exo-yellow rounded">
{filters.sizeRange.min}GB - {filters.sizeRange.max}GB
</span>
{/if}
<button
type="button"
class="ml-auto text-white/40 hover:text-white/60"
onclick={clearFilters}
>
Clear all
</button>
</div>
{/if}
</div>
<!-- Info modal -->
{#if infoGroup}
<div
class="fixed inset-0 z-[60] bg-black/60"
transition:fade={{ duration: 150 }}
onclick={() => (infoGroup = null)}
role="presentation"
></div>
<div
class="fixed z-[60] top-1/2 left-1/2 -translate-x-1/2 -translate-y-1/2 w-[min(80vw,400px)] bg-exo-dark-gray border border-exo-yellow/10 rounded-lg shadow-2xl p-4"
transition:fly={{ y: 10, duration: 200, easing: cubicOut }}
role="dialog"
aria-modal="true"
>
<div class="flex items-start justify-between mb-3">
<h3 class="font-mono text-lg text-white">{infoGroup.name}</h3>
<button
type="button"
class="p-1 rounded hover:bg-white/10 transition-colors text-white/50"
onclick={() => (infoGroup = null)}
title="Close model details"
aria-label="Close info dialog"
>
<svg class="w-4 h-4" viewBox="0 0 24 24" fill="currentColor">
<path
d="M19 6.41L17.59 5 12 10.59 6.41 5 5 6.41 10.59 12 5 17.59 6.41 19 12 13.41 17.59 19 19 17.59 13.41 12 19 6.41z"
/>
</svg>
</button>
</div>
<div class="space-y-2 text-xs font-mono">
<div class="flex items-center gap-2">
<span class="text-white/40">Family:</span>
<span class="text-white/70">{infoGroup.family || "Unknown"}</span>
</div>
<div class="flex items-center gap-2">
<span class="text-white/40">Capabilities:</span>
<span class="text-white/70">{infoGroup.capabilities.join(", ")}</span>
</div>
<div class="flex items-center gap-2">
<span class="text-white/40">Variants:</span>
<span class="text-white/70">{infoGroup.variants.length}</span>
</div>
{#if infoGroup.variants.length > 0}
<div class="mt-3 pt-3 border-t border-exo-yellow/10">
<span class="text-white/40">Available quantizations:</span>
<div class="flex flex-wrap gap-1 mt-1">
{#each infoGroup.variants as variant}
<span
class="px-1.5 py-0.5 bg-white/10 text-white/60 rounded text-[10px]"
>
{variant.quantization || "default"} ({Math.round(
(variant.storage_size_megabytes || 0) / 1024,
)}GB)
</span>
{/each}
</div>
</div>
{/if}
{#if getGroupDownloadAvailability(infoGroup)?.nodeNames?.length}
{@const infoDownload = getGroupDownloadAvailability(infoGroup)}
{#if infoDownload}
<div class="mt-3 pt-3 border-t border-exo-yellow/10">
<div class="flex items-center gap-2 mb-1">
<svg
class="w-3.5 h-3.5"
viewBox="0 0 24 24"
fill="none"
stroke="currentColor"
stroke-width="2"
stroke-linecap="round"
stroke-linejoin="round"
>
<path
class="text-white/40"
d="M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z"
/>
<path class="text-green-400" d="m9 13 2 2 4-4" />
</svg>
<span class="text-white/40">Downloaded on:</span>
</div>
<div class="flex flex-wrap gap-1 mt-1">
{#each infoDownload.nodeNames as nodeName}
<span
class="px-1.5 py-0.5 bg-green-500/10 text-green-400/80 border border-green-500/20 rounded text-[10px]"
>
{nodeName}
</span>
{/each}
</div>
</div>
{/if}
{/if}
</div>
</div>
{/if}
{/if}
@@ -0,0 +1,236 @@
<script lang="ts">
import type { TokenData } from "$lib/stores/app.svelte";
interface Props {
tokens: TokenData[];
class?: string;
isGenerating?: boolean;
onRegenerateFrom?: (tokenIndex: number) => void;
}
let {
tokens,
class: className = "",
isGenerating = false,
onRegenerateFrom,
}: Props = $props();
// Tooltip state - track both token data and index
let hoveredTokenIndex = $state<number | null>(null);
let hoveredPosition = $state<{ x: number; y: number } | null>(null);
let isTooltipHovered = $state(false);
let hideTimeoutId: ReturnType<typeof setTimeout> | null = null;
// Derive the hovered token from the index (stable across re-renders)
const hoveredToken = $derived(
hoveredTokenIndex !== null && hoveredPosition && tokens[hoveredTokenIndex]
? {
token: tokens[hoveredTokenIndex],
index: hoveredTokenIndex,
...hoveredPosition,
}
: null,
);
/**
* Get confidence styling based on probability.
* Following Apple design principles: high confidence tokens blend in,
* only uncertainty draws attention.
*/
function getConfidenceClass(probability: number): string {
if (probability > 0.8) return "text-inherit"; // Expected tokens - blend in
if (probability > 0.5) return "bg-gray-500/10 text-inherit"; // Slight hint
if (probability > 0.2) return "bg-amber-500/15 text-amber-200/90"; // Subtle warmth
return "bg-red-500/20 text-red-200/90"; // Draws attention
}
/**
* Get border/underline styling for uncertain tokens
*/
function getBorderClass(probability: number): string {
if (probability > 0.8) return "border-transparent"; // No border for expected
if (probability > 0.5) return "border-gray-500/20";
if (probability > 0.2) return "border-amber-500/30";
return "border-red-500/40";
}
function clearHideTimeout() {
if (hideTimeoutId) {
clearTimeout(hideTimeoutId);
hideTimeoutId = null;
}
}
function handleMouseEnter(
event: MouseEvent,
token: TokenData,
index: number,
) {
clearHideTimeout();
const rects = (event.target as HTMLElement).getClientRects();
let rect = rects[0];
for (let j = 0; j < rects.length; j++) {
if (event.clientY >= rects[j].top && event.clientY <= rects[j].bottom) {
rect = rects[j];
break;
}
}
hoveredTokenIndex = index;
hoveredPosition = {
x: rect.left + rect.width / 2,
y: rect.top - 10,
};
}
function handleMouseLeave() {
clearHideTimeout();
// Use longer delay during generation to account for re-renders
const delay = isGenerating ? 300 : 200;
hideTimeoutId = setTimeout(() => {
if (!isTooltipHovered) {
hoveredTokenIndex = null;
hoveredPosition = null;
}
}, delay);
}
function handleTooltipEnter() {
clearHideTimeout();
isTooltipHovered = true;
}
function handleTooltipLeave() {
isTooltipHovered = false;
hoveredTokenIndex = null;
hoveredPosition = null;
}
function handleRegenerate() {
if (hoveredToken && onRegenerateFrom) {
const indexToRegenerate = hoveredToken.index;
// Clear hover state immediately
hoveredTokenIndex = null;
hoveredPosition = null;
isTooltipHovered = false;
// Call regenerate
onRegenerateFrom(indexToRegenerate);
}
}
function formatProbability(prob: number): string {
return (prob * 100).toFixed(1) + "%";
}
function formatLogprob(logprob: number): string {
return logprob.toFixed(3);
}
function getProbabilityColor(probability: number): string {
if (probability > 0.8) return "text-gray-300";
if (probability > 0.5) return "text-gray-400";
if (probability > 0.2) return "text-amber-400";
return "text-red-400";
}
</script>
<div class="token-heatmap leading-relaxed {className}">
{#each tokens as tokenData, i (i)}
<span
role="button"
tabindex="0"
class="token-span inline rounded px-0.5 py-0.5 cursor-pointer transition-all duration-150 border {getConfidenceClass(
tokenData.probability,
)} {getBorderClass(tokenData.probability)} hover:opacity-80"
onmouseenter={(e) => handleMouseEnter(e, tokenData, i)}
onmouseleave={handleMouseLeave}>{tokenData.token}</span
>
{/each}
</div>
<!-- Tooltip -->
{#if hoveredToken}
<div
class="fixed z-50 pb-2"
style="left: {hoveredToken.x}px; top: {hoveredToken.y}px; transform: translate(-50%, -100%);"
onmouseenter={handleTooltipEnter}
onmouseleave={handleTooltipLeave}
>
<div
class="bg-gray-900/95 backdrop-blur-sm border border-gray-700/50 rounded-xl shadow-xl p-3 text-sm min-w-48"
>
<!-- Token info -->
<div class="mb-2">
<span class="text-gray-500 text-xs">Token:</span>
<span class="text-white font-mono ml-1"
>"{hoveredToken.token.token}"</span
>
<span class="{getProbabilityColor(hoveredToken.token.probability)} ml-2"
>{formatProbability(hoveredToken.token.probability)}</span
>
</div>
<div class="text-gray-400 text-xs mb-1">
logprob: <span class="text-gray-300 font-mono"
>{formatLogprob(hoveredToken.token.logprob)}</span
>
</div>
<!-- Top alternatives -->
{#if hoveredToken.token.topLogprobs.length > 0}
<div class="border-t border-gray-700/50 mt-2 pt-2">
<div class="text-gray-500 text-xs mb-1">Alternatives:</div>
{#each hoveredToken.token.topLogprobs.slice(0, 5) as alt, idx (idx)}
{@const altProb = Math.exp(alt.logprob)}
<div class="flex justify-between items-center text-xs py-0.5">
<span class="text-gray-300 font-mono truncate max-w-24"
>"{alt.token}"</span
>
<span class="text-gray-400 ml-2"
>{formatProbability(altProb)}</span
>
</div>
{/each}
</div>
{/if}
<!-- Regenerate button -->
{#if onRegenerateFrom}
<button
onclick={handleRegenerate}
class="w-full mt-2 pt-2 border-t border-gray-700/50 flex items-center justify-center gap-1.5 text-xs text-gray-400 hover:text-white transition-colors cursor-pointer"
>
<svg
class="w-3 h-3"
fill="none"
viewBox="0 0 24 24"
stroke="currentColor"
>
<path
stroke-linecap="round"
stroke-linejoin="round"
stroke-width="2"
d="M4 4v5h.582m15.356 2A8.001 8.001 0 004.582 9m0 0H9m11 11v-5h-.581m0 0a8.003 8.003 0 01-15.357-2m15.357 2H15"
/>
</svg>
Regenerate from here
</button>
{/if}
</div>
<!-- Arrow -->
<div class="absolute left-1/2 -translate-x-1/2 top-full">
<div class="border-8 border-transparent border-t-gray-900"></div>
</div>
</div>
{/if}
<style>
.token-heatmap {
word-wrap: break-word;
white-space: pre-wrap;
}
.token-span {
margin: 0;
border-width: 1px;
}
</style>
+168 -34
View File
@@ -5,22 +5,36 @@
topologyData,
isTopologyMinimized,
debugMode,
nodeThunderboltBridge,
nodeRdmaCtl,
nodeIdentities,
type NodeInfo,
} from "$lib/stores/app.svelte";
interface Props {
class?: string;
highlightedNodes?: Set<string>;
filteredNodes?: Set<string>;
onNodeClick?: (nodeId: string) => void;
}
let { class: className = "", highlightedNodes = new Set() }: Props = $props();
let {
class: className = "",
highlightedNodes = new Set(),
filteredNodes = new Set(),
onNodeClick,
}: Props = $props();
let svgContainer: SVGSVGElement | undefined = $state();
let resizeObserver: ResizeObserver | undefined;
let hoveredNodeId = $state<string | null>(null);
const isMinimized = $derived(isTopologyMinimized());
const data = $derived(topologyData());
const debugEnabled = $derived(debugMode());
const tbBridgeData = $derived(nodeThunderboltBridge());
const rdmaCtlData = $derived(nodeRdmaCtl());
const identitiesData = $derived(nodeIdentities());
function getNodeLabel(nodeId: string): string {
const node = data?.nodes?.[nodeId];
@@ -323,14 +337,27 @@
if (edge.source === a) entry.aToB = true;
else entry.bToA = true;
const ip = edge.sendBackIp || "?";
const ifaceInfo = getInterfaceLabel(edge.source, ip);
let ip: string;
let ifaceLabel: string;
let missingIface: boolean;
if (edge.sourceRdmaIface || edge.sinkRdmaIface) {
ip = "RDMA";
ifaceLabel = `${edge.sourceRdmaIface || "?"} \u2192 ${edge.sinkRdmaIface || "?"}`;
missingIface = false;
} else {
ip = edge.sendBackIp || "?";
const ifaceInfo = getInterfaceLabel(edge.source, ip);
ifaceLabel = ifaceInfo.label;
missingIface = ifaceInfo.missing;
}
entry.connections.push({
from: edge.source,
to: edge.target,
ip,
ifaceLabel: ifaceInfo.label,
missingIface: ifaceInfo.missing,
ifaceLabel,
missingIface,
});
pairMap.set(key, entry);
});
@@ -522,10 +549,72 @@
}
}
let iconBaseWidth = nodeRadius * 1.2;
let iconBaseHeight = nodeRadius * 1.0;
const clipPathId = `clip-${nodeInfo.id.replace(/[^a-zA-Z0-9]/g, "-")}`;
const modelLower = modelId.toLowerCase();
// Check node states for styling
const isHighlighted = highlightedNodes.has(nodeInfo.id);
const isInFilter =
filteredNodes.size > 0 && filteredNodes.has(nodeInfo.id);
const isFilteredOut =
filteredNodes.size > 0 && !filteredNodes.has(nodeInfo.id);
const isHovered = hoveredNodeId === nodeInfo.id && !isInFilter;
// Holographic wireframe colors - bright yellow for filter, subtle yellow for hover, grey for filtered out
const wireColor = isInFilter
? "rgba(255,215,0,1)" // Bright yellow for filter selection
: isHovered
? "rgba(255,215,0,0.7)" // Subtle yellow for hover
: isHighlighted
? "rgba(255,215,0,0.9)" // Yellow for instance highlight
: isFilteredOut
? "rgba(140,140,140,0.6)" // Grey for filtered out
: "rgba(179,179,179,0.8)"; // Default
const wireColorBright = "rgba(255,255,255,0.9)";
const fillColor = isInFilter
? "rgba(255,215,0,0.25)"
: isHovered
? "rgba(255,215,0,0.12)"
: isHighlighted
? "rgba(255,215,0,0.15)"
: "rgba(255,215,0,0.08)";
const strokeWidth = isInFilter
? 3
: isHovered
? 2
: isHighlighted
? 2.5
: 1.5;
const screenFill = "rgba(0,20,40,0.9)";
const glowColor = "rgba(255,215,0,0.3)";
const nodeG = nodesGroup
.append("g")
.attr("class", "graph-node")
.style("cursor", "pointer");
.style("cursor", onNodeClick ? "pointer" : "default")
.style("opacity", isFilteredOut ? 0.5 : 1);
// Add click and hover handlers - hover just updates state, styling is applied during render
nodeG
.on("click", (event: MouseEvent) => {
if (onNodeClick) {
event.stopPropagation();
onNodeClick(nodeInfo.id);
}
})
.on("mouseenter", () => {
if (onNodeClick) {
hoveredNodeId = nodeInfo.id;
}
})
.on("mouseleave", () => {
if (hoveredNodeId === nodeInfo.id) {
hoveredNodeId = null;
}
});
// Add tooltip
nodeG
@@ -534,27 +623,6 @@
`${friendlyName}\nID: ${nodeInfo.id.slice(-8)}\nMemory: ${formatBytes(ramUsed)}/${formatBytes(ramTotal)}`,
);
let iconBaseWidth = nodeRadius * 1.2;
let iconBaseHeight = nodeRadius * 1.0;
const clipPathId = `clip-${nodeInfo.id.replace(/[^a-zA-Z0-9]/g, "-")}`;
const modelLower = modelId.toLowerCase();
// Check if this node should be highlighted (from hovered instance)
const isHighlighted = highlightedNodes.has(nodeInfo.id);
// Holographic wireframe colors - yellow border when highlighted
const wireColor = isHighlighted
? "rgba(255,215,0,0.9)"
: "rgba(179,179,179,0.8)";
const wireColorBright = "rgba(255,255,255,0.9)";
const fillColor = isHighlighted
? "rgba(255,215,0,0.15)"
: "rgba(255,215,0,0.08)";
const strokeWidth = isHighlighted ? 2.5 : 1.5;
const screenFill = "rgba(0,20,40,0.9)";
const glowColor = "rgba(255,215,0,0.3)";
if (modelLower === "mac studio") {
// Mac Studio - classic cube with memory fill
iconBaseWidth = nodeRadius * 1.25;
@@ -579,6 +647,7 @@
// Main body (uniform color)
nodeG
.append("rect")
.attr("class", "node-outline")
.attr("x", x)
.attr("y", y)
.attr("width", iconBaseWidth)
@@ -661,6 +730,7 @@
// Main body (uniform color)
nodeG
.append("rect")
.attr("class", "node-outline")
.attr("x", x)
.attr("y", y)
.attr("width", iconBaseWidth)
@@ -738,6 +808,7 @@
// Screen outer frame
nodeG
.append("rect")
.attr("class", "node-outline")
.attr("x", screenX)
.attr("y", y)
.attr("width", screenWidth)
@@ -846,6 +917,7 @@
// Main shape
nodeG
.append("polygon")
.attr("class", "node-outline")
.attr("points", hexPoints)
.attr("fill", fillColor)
.attr("stroke", wireColor)
@@ -1064,11 +1136,77 @@
.attr("fill", "rgba(179,179,179,0.7)")
.text(` (${ramUsagePercent.toFixed(0)}%)`);
}
// Debug mode: Show TB bridge and RDMA status
if (debugEnabled) {
let debugLabelY =
nodeInfo.y +
iconBaseHeight / 2 +
(showFullLabels ? 32 : showCompactLabels ? 26 : 22);
const debugFontSize = showFullLabels ? 9 : 7;
const debugLineHeight = showFullLabels ? 11 : 9;
const tbStatus = tbBridgeData[nodeInfo.id];
if (tbStatus) {
const tbColor = tbStatus.enabled
? "rgba(234,179,8,0.9)"
: "rgba(100,100,100,0.7)";
const tbText = tbStatus.enabled ? "TB:ON" : "TB:OFF";
nodeG
.append("text")
.attr("x", nodeInfo.x)
.attr("y", debugLabelY)
.attr("text-anchor", "middle")
.attr("fill", tbColor)
.attr("font-size", debugFontSize)
.attr("font-family", "SF Mono, Monaco, monospace")
.text(tbText);
debugLabelY += debugLineHeight;
}
const rdmaStatus = rdmaCtlData[nodeInfo.id];
if (rdmaStatus !== undefined) {
const rdmaColor = rdmaStatus.enabled
? "rgba(74,222,128,0.9)"
: "rgba(100,100,100,0.7)";
const rdmaText = rdmaStatus.enabled ? "RDMA:ON" : "RDMA:OFF";
nodeG
.append("text")
.attr("x", nodeInfo.x)
.attr("y", debugLabelY)
.attr("text-anchor", "middle")
.attr("fill", rdmaColor)
.attr("font-size", debugFontSize)
.attr("font-family", "SF Mono, Monaco, monospace")
.text(rdmaText);
debugLabelY += debugLineHeight;
}
const identity = identitiesData[nodeInfo.id];
if (identity?.osVersion) {
nodeG
.append("text")
.attr("x", nodeInfo.x)
.attr("y", debugLabelY)
.attr("text-anchor", "middle")
.attr("fill", "rgba(179,179,179,0.7)")
.attr("font-size", debugFontSize)
.attr("font-family", "SF Mono, Monaco, monospace")
.text(
`macOS ${identity.osVersion}${identity.osBuildVersion ? ` (${identity.osBuildVersion})` : ""}`,
);
}
}
});
}
$effect(() => {
if (data) {
// Track all reactive dependencies that affect rendering
const _data = data;
const _hoveredNodeId = hoveredNodeId;
const _filteredNodes = filteredNodes;
const _highlightedNodes = highlightedNodes;
if (_data) {
renderGraph();
}
});
@@ -1091,12 +1229,8 @@
<style>
:global(.graph-node) {
transition:
transform 0.2s ease,
opacity 0.2s ease;
}
:global(.graph-node:hover) {
filter: brightness(1.1);
/* Only transition opacity for filtered-out nodes, no transition on hover stroke changes */
transition: opacity 0.2s ease;
}
:global(.graph-link) {
stroke: var(--exo-light-gray, #b3b3b3);
+6
View File
@@ -6,3 +6,9 @@ export { default as ChatSidebar } from "./ChatSidebar.svelte";
export { default as ModelCard } from "./ModelCard.svelte";
export { default as MarkdownContent } from "./MarkdownContent.svelte";
export { default as ImageParamsPanel } from "./ImageParamsPanel.svelte";
export { default as FamilyLogos } from "./FamilyLogos.svelte";
export { default as FamilySidebar } from "./FamilySidebar.svelte";
export { default as HuggingFaceResultItem } from "./HuggingFaceResultItem.svelte";
export { default as ModelFilterPopover } from "./ModelFilterPopover.svelte";
export { default as ModelPickerGroup } from "./ModelPickerGroup.svelte";
export { default as ModelPickerModal } from "./ModelPickerModal.svelte";
File diff suppressed because it is too large Load Diff
@@ -0,0 +1,97 @@
/**
* FavoritesStore - Manages favorite models with localStorage persistence
*/
import { browser } from "$app/environment";
const FAVORITES_KEY = "exo-favorite-models";
class FavoritesStore {
favorites = $state<Set<string>>(new Set());
constructor() {
if (browser) {
this.loadFromStorage();
}
}
private loadFromStorage() {
try {
const stored = localStorage.getItem(FAVORITES_KEY);
if (stored) {
const parsed = JSON.parse(stored) as string[];
this.favorites = new Set(parsed);
}
} catch (error) {
console.error("Failed to load favorites:", error);
}
}
private saveToStorage() {
try {
const array = Array.from(this.favorites);
localStorage.setItem(FAVORITES_KEY, JSON.stringify(array));
} catch (error) {
console.error("Failed to save favorites:", error);
}
}
add(baseModelId: string) {
const next = new Set(this.favorites);
next.add(baseModelId);
this.favorites = next;
this.saveToStorage();
}
remove(baseModelId: string) {
const next = new Set(this.favorites);
next.delete(baseModelId);
this.favorites = next;
this.saveToStorage();
}
toggle(baseModelId: string) {
if (this.favorites.has(baseModelId)) {
this.remove(baseModelId);
} else {
this.add(baseModelId);
}
}
isFavorite(baseModelId: string): boolean {
return this.favorites.has(baseModelId);
}
getAll(): string[] {
return Array.from(this.favorites);
}
getSet(): Set<string> {
return new Set(this.favorites);
}
hasAny(): boolean {
return this.favorites.size > 0;
}
clearAll() {
this.favorites = new Set();
this.saveToStorage();
}
}
export const favoritesStore = new FavoritesStore();
export const favorites = () => favoritesStore.favorites;
export const hasFavorites = () => favoritesStore.hasAny();
export const isFavorite = (baseModelId: string) =>
favoritesStore.isFavorite(baseModelId);
export const toggleFavorite = (baseModelId: string) =>
favoritesStore.toggle(baseModelId);
export const addFavorite = (baseModelId: string) =>
favoritesStore.add(baseModelId);
export const removeFavorite = (baseModelId: string) =>
favoritesStore.remove(baseModelId);
export const getFavorites = () => favoritesStore.getAll();
export const getFavoritesSet = () => favoritesStore.getSet();
export const clearFavorites = () => favoritesStore.clearAll();
@@ -0,0 +1,75 @@
/**
* RecentsStore - Manages recently launched models with localStorage persistence
*/
import { browser } from "$app/environment";
const RECENTS_KEY = "exo-recent-models";
const MAX_RECENT_MODELS = 20;
interface RecentEntry {
modelId: string;
launchedAt: number;
}
class RecentsStore {
recents = $state<RecentEntry[]>([]);
constructor() {
if (browser) {
this.loadFromStorage();
}
}
private loadFromStorage() {
try {
const stored = localStorage.getItem(RECENTS_KEY);
if (stored) {
const parsed = JSON.parse(stored) as RecentEntry[];
this.recents = parsed;
}
} catch (error) {
console.error("Failed to load recent models:", error);
}
}
private saveToStorage() {
try {
localStorage.setItem(RECENTS_KEY, JSON.stringify(this.recents));
} catch (error) {
console.error("Failed to save recent models:", error);
}
}
recordLaunch(modelId: string) {
// Remove existing entry for this model (if any) to move it to top
const filtered = this.recents.filter((r) => r.modelId !== modelId);
// Prepend new entry
const next = [{ modelId, launchedAt: Date.now() }, ...filtered];
// Cap at max
this.recents = next.slice(0, MAX_RECENT_MODELS);
this.saveToStorage();
}
getRecentModelIds(): string[] {
return this.recents.map((r) => r.modelId);
}
hasAny(): boolean {
return this.recents.length > 0;
}
clearAll() {
this.recents = [];
this.saveToStorage();
}
}
export const recentsStore = new RecentsStore();
export const hasRecents = () => recentsStore.hasAny();
export const getRecentModelIds = () => recentsStore.getRecentModelIds();
export const getRecentEntries = () => recentsStore.recents;
export const recordRecentLaunch = (modelId: string) =>
recentsStore.recordLaunch(modelId);
export const clearRecents = () => recentsStore.clearAll();
+152
View File
@@ -0,0 +1,152 @@
/**
* Shared utilities for parsing and querying download state.
*
* The download state from `/state` is shaped as:
* Record<NodeId, Array<TaggedDownloadEntry>>
*
* Each entry is a tagged union object like:
* { "DownloadCompleted": { shard_metadata: { "PipelineShardMetadata": { model_card: { model_id: "..." }, ... } }, ... } }
*/
/** Unwrap one level of tagged-union envelope, returning [tag, payload]. */
function unwrapTagged(
obj: Record<string, unknown>,
): [string, Record<string, unknown>] | null {
const keys = Object.keys(obj);
if (keys.length !== 1) return null;
const tag = keys[0];
const payload = obj[tag];
if (!payload || typeof payload !== "object") return null;
return [tag, payload as Record<string, unknown>];
}
/** Extract the model ID string from a download entry's nested shard_metadata. */
export function extractModelIdFromDownload(
downloadPayload: Record<string, unknown>,
): string | null {
const shardMetadata =
downloadPayload.shard_metadata ?? downloadPayload.shardMetadata;
if (!shardMetadata || typeof shardMetadata !== "object") return null;
const unwrapped = unwrapTagged(shardMetadata as Record<string, unknown>);
if (!unwrapped) return null;
const [, shardData] = unwrapped;
const modelMeta = shardData.model_card ?? shardData.modelCard;
if (!modelMeta || typeof modelMeta !== "object") return null;
const meta = modelMeta as Record<string, unknown>;
return (meta.model_id as string) ?? (meta.modelId as string) ?? null;
}
/** Extract the shard_metadata object from a download entry payload. */
export function extractShardMetadata(
downloadPayload: Record<string, unknown>,
): Record<string, unknown> | null {
const shardMetadata =
downloadPayload.shard_metadata ?? downloadPayload.shardMetadata;
if (!shardMetadata || typeof shardMetadata !== "object") return null;
return shardMetadata as Record<string, unknown>;
}
/** Get the download tag (DownloadCompleted, DownloadOngoing, etc.) from a wrapped entry. */
export function getDownloadTag(
entry: unknown,
): [string, Record<string, unknown>] | null {
if (!entry || typeof entry !== "object") return null;
return unwrapTagged(entry as Record<string, unknown>);
}
/**
* Iterate over all download entries for a given node, yielding [tag, payload, modelId].
*/
function* iterNodeDownloads(
nodeDownloads: unknown[],
): Generator<[string, Record<string, unknown>, string]> {
for (const entry of nodeDownloads) {
const tagged = getDownloadTag(entry);
if (!tagged) continue;
const [tag, payload] = tagged;
const modelId = extractModelIdFromDownload(payload);
if (!modelId) continue;
yield [tag, payload, modelId];
}
}
/** Check if a specific model is fully downloaded (DownloadCompleted) on a specific node. */
export function isModelDownloadedOnNode(
downloadsData: Record<string, unknown[]>,
nodeId: string,
modelId: string,
): boolean {
const nodeDownloads = downloadsData[nodeId];
if (!Array.isArray(nodeDownloads)) return false;
for (const [tag, , entryModelId] of iterNodeDownloads(nodeDownloads)) {
if (tag === "DownloadCompleted" && entryModelId === modelId) return true;
}
return false;
}
/** Get all node IDs where a model is fully downloaded (DownloadCompleted). */
export function getNodesWithModelDownloaded(
downloadsData: Record<string, unknown[]>,
modelId: string,
): string[] {
const result: string[] = [];
for (const nodeId of Object.keys(downloadsData)) {
if (isModelDownloadedOnNode(downloadsData, nodeId, modelId)) {
result.push(nodeId);
}
}
return result;
}
/**
* Find shard metadata for a model from any download entry across all nodes.
* Returns the first match found (completed entries are preferred).
*/
export function getShardMetadataForModel(
downloadsData: Record<string, unknown[]>,
modelId: string,
): Record<string, unknown> | null {
let fallback: Record<string, unknown> | null = null;
for (const nodeDownloads of Object.values(downloadsData)) {
if (!Array.isArray(nodeDownloads)) continue;
for (const [tag, payload, entryModelId] of iterNodeDownloads(
nodeDownloads,
)) {
if (entryModelId !== modelId) continue;
const shard = extractShardMetadata(payload);
if (!shard) continue;
if (tag === "DownloadCompleted") return shard;
if (!fallback) fallback = shard;
}
}
return fallback;
}
/**
* Get the download status tag for a specific model on a specific node.
* Returns the "best" status: DownloadCompleted > DownloadOngoing > others.
*/
export function getModelDownloadStatus(
downloadsData: Record<string, unknown[]>,
nodeId: string,
modelId: string,
): string | null {
const nodeDownloads = downloadsData[nodeId];
if (!Array.isArray(nodeDownloads)) return null;
let best: string | null = null;
for (const [tag, , entryModelId] of iterNodeDownloads(nodeDownloads)) {
if (entryModelId !== modelId) continue;
if (tag === "DownloadCompleted") return tag;
if (tag === "DownloadOngoing") best = tag;
else if (!best) best = tag;
}
return best;
}
File diff suppressed because it is too large Load Diff
+76 -36
View File
@@ -3,9 +3,12 @@
import {
topologyData,
downloads,
nodeDisk,
type DownloadProgress,
refreshState,
lastUpdate as lastUpdateStore,
startDownload,
deleteDownload,
} from "$lib/stores/app.svelte";
import HeaderNav from "$lib/components/HeaderNav.svelte";
@@ -28,16 +31,20 @@
etaMs: number;
status: "completed" | "downloading";
files: FileProgress[];
shardMetadata?: Record<string, unknown>;
};
type NodeEntry = {
nodeId: string;
nodeName: string;
models: ModelEntry[];
diskAvailable?: number;
diskTotal?: number;
};
const data = $derived(topologyData());
const downloadsData = $derived(downloads());
const nodeDiskData = $derived(nodeDisk());
function getNodeLabel(nodeId: string): string {
const node = data?.nodes?.[nodeId];
@@ -172,33 +179,6 @@
}
let downloadOverview = $state<NodeEntry[]>([]);
let models = $state<Array<{ id: string; storage_size_megabytes?: number }>>(
[],
);
async function fetchModels() {
try {
const response = await fetch("/models");
if (response.ok) {
const data = await response.json();
models = data.data || [];
}
} catch (error) {
console.error("Failed to fetch models:", error);
}
}
function getModelTotalBytes(
modelId: string,
downloadTotalBytes: number,
): number {
if (downloadTotalBytes > 0) return downloadTotalBytes;
const model = models.find((m) => m.id === modelId);
if (model?.storage_size_megabytes) {
return model.storage_size_megabytes * 1024 * 1024;
}
return 0;
}
$effect(() => {
try {
@@ -296,6 +276,12 @@
}
}
// Extract shard_metadata for use with download actions
const shardMetadata = (downloadPayload.shard_metadata ??
downloadPayload.shardMetadata) as
| Record<string, unknown>
| undefined;
const entry: ModelEntry = {
modelId,
prettyName,
@@ -312,6 +298,7 @@
? "completed"
: "downloading",
files,
shardMetadata,
};
const existing = modelMap.get(modelId);
@@ -344,10 +331,17 @@
];
}
// Get disk info for this node
const diskInfo = nodeDiskData?.[nodeId];
const diskAvailable = diskInfo?.available?.inBytes;
const diskTotal = diskInfo?.total?.inBytes;
built.push({
nodeId,
nodeName: getNodeLabel(nodeId),
models,
diskAvailable,
diskTotal,
});
}
@@ -373,7 +367,6 @@
onMount(() => {
// Ensure we fetch at least once when visiting downloads directly
refreshState();
fetchModels();
});
</script>
@@ -435,6 +428,14 @@
<div class="text-xs text-exo-light-gray font-mono truncate">
{node.nodeId}
</div>
<div class="text-xs text-exo-light-gray font-mono mt-1">
{formatBytes(
node.models
.filter((m) => m.status === "completed")
.reduce((sum, m) => sum + m.totalBytes, 0),
)} models{#if node.diskAvailable != null}
- {formatBytes(node.diskAvailable)} free{/if}
</div>
</div>
<div
class="text-xs font-mono uppercase tracking-wider whitespace-nowrap shrink-0 text-right"
@@ -447,13 +448,6 @@
/ {node.models.length} models</span
>
</div>
<div class="text-exo-light-gray normal-case tracking-normal">
{formatBytes(
node.models
.filter((m) => m.status === "completed")
.reduce((sum, m) => sum + m.totalBytes, 0),
)} on disk
</div>
</div>
</div>
@@ -482,7 +476,7 @@
{#if model.status !== "completed"}
<div class="text-[11px] text-exo-light-gray font-mono">
{formatBytes(model.downloadedBytes)} / {formatBytes(
getModelTotalBytes(model.modelId, model.totalBytes),
model.totalBytes,
)}
</div>
{/if}
@@ -497,6 +491,52 @@
>
{pct.toFixed(1)}%
</span>
{#if model.status !== "completed" && model.shardMetadata}
<button
type="button"
class="text-exo-light-gray hover:text-exo-yellow transition-colors"
onclick={() =>
startDownload(node.nodeId, model.shardMetadata!)}
title="Start download"
>
<svg
class="w-4 h-4"
viewBox="0 0 20 20"
fill="none"
stroke="currentColor"
stroke-width="2"
>
<path
d="M10 3v10m0 0l-3-3m3 3l3-3M3 17h14"
stroke-linecap="round"
stroke-linejoin="round"
></path>
</svg>
</button>
{/if}
{#if model.status === "completed"}
<button
type="button"
class="text-exo-light-gray hover:text-red-400 transition-colors"
onclick={() =>
deleteDownload(node.nodeId, model.modelId)}
title="Delete download"
>
<svg
class="w-4 h-4"
viewBox="0 0 20 20"
fill="none"
stroke="currentColor"
stroke-width="2"
>
<path
d="M4 6h12M8 6V4h4v2m1 0v10a1 1 0 01-1 1H8a1 1 0 01-1-1V6h6"
stroke-linecap="round"
stroke-linejoin="round"
></path>
</svg>
</button>
{/if}
<button
type="button"
class="text-exo-light-gray hover:text-exo-yellow transition-colors"
+190
View File
@@ -0,0 +1,190 @@
<script lang="ts">
import { onMount } from "svelte";
import {
listTraces,
getTraceRawUrl,
type TraceListItem,
} from "$lib/stores/app.svelte";
import HeaderNav from "$lib/components/HeaderNav.svelte";
let traces = $state<TraceListItem[]>([]);
let loading = $state(true);
let error = $state<string | null>(null);
function formatBytes(bytes: number): string {
if (!bytes || bytes <= 0) return "0B";
const units = ["B", "KB", "MB", "GB"];
const i = Math.min(
Math.floor(Math.log(bytes) / Math.log(1024)),
units.length - 1,
);
const val = bytes / Math.pow(1024, i);
return `${val.toFixed(val >= 10 ? 0 : 1)}${units[i]}`;
}
function formatDate(isoString: string): string {
const date = new Date(isoString);
return date.toLocaleString();
}
async function downloadTrace(taskId: string) {
const response = await fetch(getTraceRawUrl(taskId));
const blob = await response.blob();
const url = URL.createObjectURL(blob);
const a = document.createElement("a");
a.href = url;
a.download = `trace_${taskId}.json`;
a.click();
URL.revokeObjectURL(url);
}
async function openInPerfetto(taskId: string) {
// Fetch trace data from our local API
const response = await fetch(getTraceRawUrl(taskId));
const traceData = await response.arrayBuffer();
// Open Perfetto UI
const perfettoWindow = window.open("https://ui.perfetto.dev");
if (!perfettoWindow) {
alert("Failed to open Perfetto. Please allow popups.");
return;
}
// Wait for Perfetto to be ready, then send trace via postMessage
const onMessage = (e: MessageEvent) => {
if (e.data === "PONG") {
window.removeEventListener("message", onMessage);
perfettoWindow.postMessage(
{
perfetto: {
buffer: traceData,
title: `Trace ${taskId}`,
},
},
"https://ui.perfetto.dev",
);
}
};
window.addEventListener("message", onMessage);
// Ping Perfetto until it responds
const pingInterval = setInterval(() => {
perfettoWindow.postMessage("PING", "https://ui.perfetto.dev");
}, 50);
// Clean up after 10 seconds
setTimeout(() => {
clearInterval(pingInterval);
window.removeEventListener("message", onMessage);
}, 10000);
}
async function refresh() {
loading = true;
error = null;
try {
const response = await listTraces();
traces = response.traces;
} catch (e) {
error = e instanceof Error ? e.message : "Failed to load traces";
} finally {
loading = false;
}
}
onMount(() => {
refresh();
});
</script>
<div class="min-h-screen bg-exo-dark-gray text-white">
<HeaderNav showHome={true} />
<div class="max-w-7xl mx-auto px-4 lg:px-8 py-6 space-y-6">
<div class="flex items-center justify-between gap-4 flex-wrap">
<div>
<h1
class="text-2xl font-mono tracking-[0.2em] uppercase text-exo-yellow"
>
Traces
</h1>
</div>
<div class="flex items-center gap-3">
<button
type="button"
class="text-xs font-mono text-exo-light-gray hover:text-exo-yellow transition-colors uppercase border border-exo-medium-gray/40 px-2 py-1 rounded"
onclick={refresh}
disabled={loading}
>
Refresh
</button>
</div>
</div>
{#if loading}
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-6 text-center text-exo-light-gray"
>
<div class="text-sm">Loading traces...</div>
</div>
{:else if error}
<div
class="rounded border border-red-500/30 bg-red-500/10 p-6 text-center text-red-400"
>
<div class="text-sm">{error}</div>
</div>
{:else if traces.length === 0}
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-6 text-center text-exo-light-gray space-y-2"
>
<div class="text-sm">No traces found.</div>
<div class="text-xs text-exo-light-gray/70">
Run exo with EXO_TRACING_ENABLED=1 to collect traces.
</div>
</div>
{:else}
<div class="space-y-3">
{#each traces as trace}
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-4 flex items-center justify-between gap-4"
>
<div class="min-w-0 flex-1">
<a
href="#/traces/{trace.taskId}"
class="text-sm font-mono text-white hover:text-exo-yellow transition-colors truncate block"
>
{trace.taskId}
</a>
<div class="text-xs text-exo-light-gray font-mono mt-1">
{formatDate(trace.createdAt)} &bull; {formatBytes(
trace.fileSize,
)}
</div>
</div>
<div class="flex items-center gap-2 shrink-0">
<a
href="#/traces/{trace.taskId}"
class="text-xs font-mono text-exo-light-gray hover:text-exo-yellow transition-colors uppercase border border-exo-medium-gray/40 px-2 py-1 rounded"
>
View Stats
</a>
<button
type="button"
class="text-xs font-mono text-exo-light-gray hover:text-exo-yellow transition-colors uppercase border border-exo-medium-gray/40 px-2 py-1 rounded"
onclick={() => downloadTrace(trace.taskId)}
>
Download
</button>
<button
type="button"
class="text-xs font-mono text-exo-dark-gray bg-exo-yellow hover:bg-exo-yellow/90 transition-colors uppercase px-2 py-1 rounded font-semibold"
onclick={() => openInPerfetto(trace.taskId)}
>
View Trace
</button>
</div>
</div>
{/each}
</div>
{/if}
</div>
</div>
@@ -0,0 +1,367 @@
<script lang="ts">
import { page } from "$app/stores";
import { onMount } from "svelte";
import {
fetchTraceStats,
getTraceRawUrl,
type TraceStatsResponse,
type TraceCategoryStats,
} from "$lib/stores/app.svelte";
import HeaderNav from "$lib/components/HeaderNav.svelte";
const taskId = $derived($page.params.taskId);
let stats = $state<TraceStatsResponse | null>(null);
let loading = $state(true);
let error = $state<string | null>(null);
function formatDuration(us: number): string {
if (us < 1000) return `${us.toFixed(0)}us`;
if (us < 1_000_000) return `${(us / 1000).toFixed(2)}ms`;
return `${(us / 1_000_000).toFixed(2)}s`;
}
function formatPercentage(part: number, total: number): string {
if (total === 0) return "0.0%";
return `${((part / total) * 100).toFixed(1)}%`;
}
// Parse hierarchical categories like "sync/compute" into phases
type PhaseData = {
name: string;
subcategories: { name: string; stats: TraceCategoryStats }[];
totalUs: number; // From outer span (e.g., "sync" category)
stepCount: number; // Count of outer span events
};
function parsePhases(
byCategory: Record<string, TraceCategoryStats>,
): PhaseData[] {
const phases = new Map<
string,
{
subcats: Map<string, TraceCategoryStats>;
outerStats: TraceCategoryStats | null;
}
>();
for (const [category, catStats] of Object.entries(byCategory)) {
if (category.includes("/")) {
const [phase, subcat] = category.split("/", 2);
if (!phases.has(phase)) {
phases.set(phase, { subcats: new Map(), outerStats: null });
}
phases.get(phase)!.subcats.set(subcat, catStats);
} else {
// Outer span - this IS the phase total
if (!phases.has(category)) {
phases.set(category, { subcats: new Map(), outerStats: null });
}
phases.get(category)!.outerStats = catStats;
}
}
return Array.from(phases.entries())
.filter(([_, data]) => data.outerStats !== null) // Only phases with outer spans
.map(([name, data]) => ({
name,
subcategories: Array.from(data.subcats.entries())
.map(([subName, subStats]) => ({ name: subName, stats: subStats }))
.sort((a, b) => b.stats.totalUs - a.stats.totalUs),
totalUs: data.outerStats!.totalUs, // Outer span total
stepCount: data.outerStats!.count, // Number of steps
}))
.sort((a, b) => b.totalUs - a.totalUs);
}
async function downloadTrace() {
if (!taskId) return;
const response = await fetch(getTraceRawUrl(taskId));
const blob = await response.blob();
const url = URL.createObjectURL(blob);
const a = document.createElement("a");
a.href = url;
a.download = `trace_${taskId}.json`;
a.click();
URL.revokeObjectURL(url);
}
async function openInPerfetto() {
if (!taskId) return;
// Fetch trace data from our local API
const response = await fetch(getTraceRawUrl(taskId));
const traceData = await response.arrayBuffer();
// Open Perfetto UI
const perfettoWindow = window.open("https://ui.perfetto.dev");
if (!perfettoWindow) {
alert("Failed to open Perfetto. Please allow popups.");
return;
}
// Wait for Perfetto to be ready, then send trace via postMessage
const onMessage = (e: MessageEvent) => {
if (e.data === "PONG") {
window.removeEventListener("message", onMessage);
perfettoWindow.postMessage(
{
perfetto: {
buffer: traceData,
title: `Trace ${taskId}`,
},
},
"https://ui.perfetto.dev",
);
}
};
window.addEventListener("message", onMessage);
// Ping Perfetto until it responds
const pingInterval = setInterval(() => {
perfettoWindow.postMessage("PING", "https://ui.perfetto.dev");
}, 50);
// Clean up after 10 seconds
setTimeout(() => {
clearInterval(pingInterval);
window.removeEventListener("message", onMessage);
}, 10000);
}
onMount(async () => {
if (!taskId) {
error = "No task ID provided";
loading = false;
return;
}
try {
stats = await fetchTraceStats(taskId);
} catch (e) {
error = e instanceof Error ? e.message : "Failed to load trace";
} finally {
loading = false;
}
});
const phases = $derived(stats ? parsePhases(stats.byCategory) : []);
const sortedRanks = $derived(
stats
? Object.keys(stats.byRank)
.map(Number)
.sort((a, b) => a - b)
: [],
);
const nodeCount = $derived(sortedRanks.length || 1);
</script>
<div class="min-h-screen bg-exo-dark-gray text-white">
<HeaderNav showHome={true} />
<div class="max-w-7xl mx-auto px-4 lg:px-8 py-6 space-y-6">
<div class="flex items-center justify-between gap-4 flex-wrap">
<div>
<h1
class="text-2xl font-mono tracking-[0.2em] uppercase text-exo-yellow"
>
Trace
</h1>
<p class="text-sm text-exo-light-gray font-mono truncate max-w-lg">
{taskId}
</p>
</div>
<div class="flex items-center gap-3">
<a
href="#/traces"
class="text-xs font-mono text-exo-light-gray hover:text-exo-yellow transition-colors uppercase border border-exo-medium-gray/40 px-3 py-1.5 rounded"
>
All Traces
</a>
<button
type="button"
class="text-xs font-mono text-exo-light-gray hover:text-exo-yellow transition-colors uppercase border border-exo-medium-gray/40 px-3 py-1.5 rounded"
onclick={downloadTrace}
disabled={loading || !!error}
>
Download
</button>
<button
type="button"
class="text-xs font-mono text-exo-dark-gray bg-exo-yellow hover:bg-exo-yellow/90 transition-colors uppercase px-3 py-1.5 rounded font-semibold"
onclick={openInPerfetto}
disabled={loading || !!error}
>
View Trace
</button>
</div>
</div>
{#if loading}
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-6 text-center text-exo-light-gray"
>
<div class="text-sm">Loading trace data...</div>
</div>
{:else if error}
<div
class="rounded border border-red-500/30 bg-red-500/10 p-6 text-center text-red-400"
>
<div class="text-sm">{error}</div>
</div>
{:else if stats}
<!-- Wall Time Summary -->
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-4 space-y-2"
>
<h2
class="text-sm font-mono uppercase tracking-wider text-exo-light-gray"
>
Summary
</h2>
<div class="text-3xl font-mono text-exo-yellow">
{formatDuration(stats.totalWallTimeUs)}
</div>
<div class="text-xs text-exo-light-gray">Total wall time</div>
</div>
<!-- By Phase -->
{#if phases.length > 0}
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-4 space-y-4"
>
<h2
class="text-sm font-mono uppercase tracking-wider text-exo-light-gray"
>
By Phase <span class="text-exo-light-gray/50">(avg per node)</span>
</h2>
<div class="space-y-4">
{#each phases as phase}
{@const normalizedTotal = phase.totalUs / nodeCount}
{@const normalizedStepCount = phase.stepCount / nodeCount}
<div class="space-y-2">
<div class="flex items-center justify-between">
<span class="text-sm font-mono text-white">{phase.name}</span>
<span class="text-sm font-mono">
<span class="text-exo-yellow"
>{formatDuration(normalizedTotal)}</span
>
<span class="text-exo-light-gray ml-2">
({normalizedStepCount} steps, {formatDuration(
normalizedTotal / normalizedStepCount,
)}/step)
</span>
</span>
</div>
{#if phase.subcategories.length > 0}
<div class="pl-4 space-y-1.5">
{#each phase.subcategories as subcat}
{@const normalizedSubcat =
subcat.stats.totalUs / nodeCount}
{@const pct = formatPercentage(
normalizedSubcat,
normalizedTotal,
)}
{@const perStep = normalizedSubcat / normalizedStepCount}
<div
class="flex items-center justify-between text-xs font-mono"
>
<span class="text-exo-light-gray">{subcat.name}</span>
<span class="text-white">
{formatDuration(normalizedSubcat)}
<span class="text-exo-light-gray ml-2">({pct})</span>
<span class="text-exo-light-gray/60 ml-2"
>{formatDuration(perStep)}/step</span
>
</span>
</div>
<!-- Progress bar -->
<div
class="relative h-1.5 bg-exo-black/60 rounded-sm overflow-hidden"
>
<div
class="absolute inset-y-0 left-0 bg-gradient-to-r from-exo-yellow to-exo-yellow/70 transition-all duration-300"
style="width: {pct}"
></div>
</div>
{/each}
</div>
{/if}
</div>
{/each}
</div>
</div>
{/if}
<!-- By Rank -->
{#if sortedRanks.length > 0}
<div
class="rounded border border-exo-medium-gray/30 bg-exo-black/30 p-4 space-y-4"
>
<h2
class="text-sm font-mono uppercase tracking-wider text-exo-light-gray"
>
By Rank
</h2>
<div class="grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-4">
{#each sortedRanks as rank}
{@const rankStats = stats.byRank[rank]}
{@const rankPhases = parsePhases(rankStats.byCategory)}
<div
class="rounded border border-exo-medium-gray/20 bg-exo-dark-gray/60 p-3 space-y-3"
>
<div class="text-sm font-mono text-exo-yellow">
Rank {rank}
</div>
<div class="space-y-2">
{#each rankPhases as phase}
<div class="space-y-1">
<div class="flex items-center justify-between text-xs">
<span class="font-mono text-exo-light-gray"
>{phase.name}</span
>
<span class="font-mono text-white">
{formatDuration(phase.totalUs)}
<span class="text-exo-light-gray/50 ml-1">
({phase.stepCount}x)
</span>
</span>
</div>
{#if phase.subcategories.length > 0}
<div class="pl-2 space-y-0.5">
{#each phase.subcategories as subcat}
{@const pct = formatPercentage(
subcat.stats.totalUs,
phase.totalUs,
)}
{@const perStep =
subcat.stats.totalUs / phase.stepCount}
<div
class="flex items-center justify-between text-[10px] font-mono"
>
<span class="text-exo-light-gray/70"
>{subcat.name}</span
>
<span class="text-exo-light-gray">
{formatDuration(subcat.stats.totalUs)}
<span class="text-exo-light-gray/50"
>({pct})</span
>
<span class="text-exo-light-gray/30 ml-1"
>{formatDuration(perStep)}/step</span
>
</span>
</div>
{/each}
</div>
{/if}
</div>
{/each}
</div>
</div>
{/each}
</div>
</div>
{/if}
{/if}
</div>
</div>
Generated
+59 -6
View File
@@ -21,7 +21,9 @@
"nixpkgs"
],
"purescript-overlay": "purescript-overlay",
"pyproject-nix": "pyproject-nix"
"pyproject-nix": [
"pyproject-nix"
]
},
"locked": {
"lastModified": 1765953015,
@@ -149,19 +151,44 @@
"type": "github"
}
},
"pyproject-build-systems": {
"inputs": {
"nixpkgs": [
"nixpkgs"
],
"pyproject-nix": [
"pyproject-nix"
],
"uv2nix": [
"uv2nix"
]
},
"locked": {
"lastModified": 1763662255,
"narHash": "sha256-4bocaOyLa3AfiS8KrWjZQYu+IAta05u3gYZzZ6zXbT0=",
"owner": "pyproject-nix",
"repo": "build-system-pkgs",
"rev": "042904167604c681a090c07eb6967b4dd4dae88c",
"type": "github"
},
"original": {
"owner": "pyproject-nix",
"repo": "build-system-pkgs",
"type": "github"
}
},
"pyproject-nix": {
"inputs": {
"nixpkgs": [
"dream2nix",
"nixpkgs"
]
},
"locked": {
"lastModified": 1763017646,
"narHash": "sha256-Z+R2lveIp6Skn1VPH3taQIuMhABg1IizJd8oVdmdHsQ=",
"lastModified": 1764134915,
"narHash": "sha256-xaKvtPx6YAnA3HQVp5LwyYG1MaN4LLehpQI8xEdBvBY=",
"owner": "pyproject-nix",
"repo": "pyproject.nix",
"rev": "47bd6f296502842643078d66128f7b5e5370790c",
"rev": "2c8df1383b32e5443c921f61224b198a2282a657",
"type": "github"
},
"original": {
@@ -178,7 +205,10 @@
"flake-parts": "flake-parts",
"nixpkgs": "nixpkgs",
"nixpkgs-swift": "nixpkgs-swift",
"treefmt-nix": "treefmt-nix"
"pyproject-build-systems": "pyproject-build-systems",
"pyproject-nix": "pyproject-nix",
"treefmt-nix": "treefmt-nix",
"uv2nix": "uv2nix"
}
},
"rust-analyzer-src": {
@@ -239,6 +269,29 @@
"repo": "treefmt-nix",
"type": "github"
}
},
"uv2nix": {
"inputs": {
"nixpkgs": [
"nixpkgs"
],
"pyproject-nix": [
"pyproject-nix"
]
},
"locked": {
"lastModified": 1767701098,
"narHash": "sha256-CJhKZnWb3gumR9oTRjFvCg/6lYTGbZRU7xtvcyWIRwU=",
"owner": "pyproject-nix",
"repo": "uv2nix",
"rev": "9d357f0d2ce6f5f35ec7959d7e704452352eb4da",
"type": "github"
},
"original": {
"owner": "pyproject-nix",
"repo": "uv2nix",
"type": "github"
}
}
},
"root": "root",
+45 -5
View File
@@ -24,6 +24,26 @@
dream2nix = {
url = "github:nix-community/dream2nix";
inputs.nixpkgs.follows = "nixpkgs";
inputs.pyproject-nix.follows = "pyproject-nix";
};
# Python packaging with uv2nix
pyproject-nix = {
url = "github:pyproject-nix/pyproject.nix";
inputs.nixpkgs.follows = "nixpkgs";
};
uv2nix = {
url = "github:pyproject-nix/uv2nix";
inputs.pyproject-nix.follows = "pyproject-nix";
inputs.nixpkgs.follows = "nixpkgs";
};
pyproject-build-systems = {
url = "github:pyproject-nix/build-system-pkgs";
inputs.pyproject-nix.follows = "pyproject-nix";
inputs.uv2nix.follows = "uv2nix";
inputs.nixpkgs.follows = "nixpkgs";
};
# Pinned nixpkgs for swift-format (swift is broken on x86_64-linux in newer nixpkgs)
@@ -48,6 +68,7 @@
inputs.treefmt-nix.flakeModule
./dashboard/parts.nix
./rust/parts.nix
./python/parts.nix
];
perSystem =
@@ -58,6 +79,14 @@
pkgsSwift = import inputs.nixpkgs-swift { inherit system; };
in
{
# Allow unfree for metal-toolchain (needed for Darwin Metal packages)
_module.args.pkgs = import inputs.nixpkgs {
inherit system;
config.allowUnfreePredicate = pkg: (pkg.pname or "") == "metal-toolchain";
overlays = [
(import ./nix/apple-sdk-overlay.nix)
];
};
treefmt = {
projectRootFile = "flake.nix";
programs = {
@@ -79,14 +108,25 @@
enable = true;
package = pkgsSwift.swiftPackages.swift-format;
};
shfmt.enable = true;
};
};
checks.lint = pkgs.runCommand "lint-check" { } ''
export RUFF_CACHE_DIR="$TMPDIR/ruff-cache"
${pkgs.ruff}/bin/ruff check ${inputs.self}/
touch $out
'';
packages = lib.optionalAttrs pkgs.stdenv.hostPlatform.isDarwin (
let
uvLock = builtins.fromTOML (builtins.readFile ./uv.lock);
mlxPackage = builtins.head (builtins.filter (p: p.name == "mlx") uvLock.package);
uvLockMlxVersion = mlxPackage.version;
in
{
metal-toolchain = pkgs.callPackage ./nix/metal-toolchain.nix { };
mlx = pkgs.callPackage ./nix/mlx.nix {
inherit (self'.packages) metal-toolchain;
inherit uvLockMlxVersion;
};
default = self'.packages.exo;
}
);
devShells.default = with pkgs; pkgs.mkShell {
inputsFrom = [ self'.checks.cargo-build ];
+2 -2
View File
@@ -1,7 +1,7 @@
export NIX_CONFIG := "extra-experimental-features = nix-command flakes"
fmt:
nix fmt
treefmt || nix fmt
lint:
uv run ruff check --fix
@@ -20,7 +20,7 @@ sync-clean:
rust-rebuild:
cargo run --bin stub_gen
just sync-clean
uv sync --reinstall-package exo_pyo3_bindings
build-dashboard:
#!/usr/bin/env bash
+18
View File
@@ -0,0 +1,18 @@
# Overlay that builds apple-sdk with a custom versions.json (for SDK 26.2).
# The upstream nixpkgs package reads versions.json at eval time via a relative
# path, so we can't override it through callPackage args. Instead, we copy
# the upstream source and patch the one file.
final: _prev:
let
upstreamSrc = final.path + "/pkgs/by-name/ap/apple-sdk";
patchedSrc = final.runCommandLocal "apple-sdk-src-patched" { } ''
cp -r ${upstreamSrc} $out
chmod -R u+w $out
cp ${./apple-sdk/metadata/versions.json} $out/metadata/versions.json
'';
in
{
apple-sdk_26 = final.callPackage (patchedSrc + "/package.nix") {
darwinSdkMajorVersion = "26";
};
}
+26
View File
@@ -0,0 +1,26 @@
{
"14": {
"urls": [
"https://swcdn.apple.com/content/downloads/14/48/052-59890-A_I0F5YGAY0Y/p9n40hio7892gou31o1v031ng6fnm9sb3c/CLTools_macOSNMOS_SDK.pkg",
"https://web.archive.org/web/20250211001355/https://swcdn.apple.com/content/downloads/14/48/052-59890-A_I0F5YGAY0Y/p9n40hio7892gou31o1v031ng6fnm9sb3c/CLTools_macOSNMOS_SDK.pkg"
],
"version": "14.4",
"hash": "sha256-QozDiwY0Czc0g45vPD7G4v4Ra+3DujCJbSads3fJjjM="
},
"15": {
"urls": [
"https://swcdn.apple.com/content/downloads/52/01/082-41241-A_0747ZN8FHV/dectd075r63pppkkzsb75qk61s0lfee22j/CLTools_macOSNMOS_SDK.pkg",
"https://web.archive.org/web/20250530132510/https://swcdn.apple.com/content/downloads/52/01/082-41241-A_0747ZN8FHV/dectd075r63pppkkzsb75qk61s0lfee22j/CLTools_macOSNMOS_SDK.pkg"
],
"version": "15.5",
"hash": "sha256-HBiSJuw1XBUK5R/8Sj65c3rftSEvQl/O9ZZVp/g1Amo="
},
"26": {
"urls": [
"https://swcdn.apple.com/content/downloads/60/22/089-71960-A_W8BL1RUJJ6/5zkyplomhk1cm7z6xja2ktgapnhhti6wwd/CLTools_macOSNMOS_SDK.pkg",
"https://web.archive.org/web/20250915230423/https://swcdn.apple.com/content/downloads/60/22/089-71960-A_W8BL1RUJJ6/5zkyplomhk1cm7z6xja2ktgapnhhti6wwd/CLTools_macOSNMOS_SDK.pkg"
],
"version": "26.2",
"hash": "sha256-hXRlMieVv0smna5uiWRwq87IWOaPWtAjAldbi+wQXcw="
}
}
+79
View File
@@ -0,0 +1,79 @@
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 0ed30932..d8528132 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -177,11 +177,7 @@ if(MLX_BUILD_METAL)
add_compile_definitions(MLX_METAL_DEBUG)
endif()
- # Throw an error if xcrun not found
- execute_process(
- COMMAND zsh "-c" "/usr/bin/xcrun -sdk macosx --show-sdk-version"
- OUTPUT_VARIABLE MACOS_SDK_VERSION
- OUTPUT_STRIP_TRAILING_WHITESPACE COMMAND_ERROR_IS_FATAL ANY)
+ set(MACOS_SDK_VERSION @sdkVersion@)
if(${MACOS_SDK_VERSION} LESS 14.0)
message(
@@ -199,11 +195,8 @@ if(MLX_BUILD_METAL)
endif()
set(XCRUN_FLAGS "-mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
endif()
- execute_process(
- COMMAND
- zsh "-c"
- "echo \"__METAL_VERSION__\" | xcrun -sdk macosx metal ${XCRUN_FLAGS} -E -x metal -P - | tail -1 | tr -d '\n'"
- OUTPUT_VARIABLE MLX_METAL_VERSION COMMAND_ERROR_IS_FATAL ANY)
+ set(
+ MLX_METAL_VERSION @metalVersion@)
FetchContent_Declare(metal_cpp URL ${METAL_CPP_URL})
FetchContent_MakeAvailable(metal_cpp)
target_include_directories(
diff --git a/cmake/extension.cmake b/cmake/extension.cmake
index 13db804a..5b385132 100644
--- a/cmake/extension.cmake
+++ b/cmake/extension.cmake
@@ -36,7 +36,7 @@ macro(mlx_build_metallib)
add_custom_command(
OUTPUT ${MTLLIB_BUILD_TARGET}
COMMAND
- xcrun -sdk macosx metal
+ metal -fmodules-cache-path=${CMAKE_BINARY_DIR}/metal-cache
"$<LIST:TRANSFORM,${MTLLIB_INCLUDE_DIRS},PREPEND,-I>"
${MTLLIB_COMPILE_OPTIONS} ${MTLLIB_SOURCES} -o ${MTLLIB_BUILD_TARGET}
DEPENDS ${MTLLIB_DEPS} ${MTLLIB_SOURCES}
diff --git a/mlx/backend/metal/kernels/CMakeLists.txt b/mlx/backend/metal/kernels/CMakeLists.txt
index 262b0495..5c7446ad 100644
--- a/mlx/backend/metal/kernels/CMakeLists.txt
+++ b/mlx/backend/metal/kernels/CMakeLists.txt
@@ -29,7 +29,7 @@ function(build_kernel_base TARGET SRCFILE DEPS)
"-mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
endif()
add_custom_command(
- COMMAND xcrun -sdk macosx metal ${METAL_FLAGS} -c ${SRCFILE}
+ COMMAND metal -fmodules-cache-path=${CMAKE_BINARY_DIR}/metal-cache ${METAL_FLAGS} -c ${SRCFILE}
-I${PROJECT_SOURCE_DIR} -o ${TARGET}.air
DEPENDS ${SRCFILE} ${DEPS} ${BASE_HEADERS}
OUTPUT ${TARGET}.air
@@ -170,7 +170,7 @@ endif()
add_custom_command(
OUTPUT ${MLX_METAL_PATH}/mlx.metallib
- COMMAND xcrun -sdk macosx metallib ${KERNEL_AIR} -o
+ COMMAND metallib ${KERNEL_AIR} -o
${MLX_METAL_PATH}/mlx.metallib
DEPENDS ${KERNEL_AIR}
COMMENT "Building mlx.metallib"
diff --git a/mlx/backend/metal/make_compiled_preamble.sh b/mlx/backend/metal/make_compiled_preamble.sh
index bb55ed3a..94ea7dd7 100644
--- a/mlx/backend/metal/make_compiled_preamble.sh
+++ b/mlx/backend/metal/make_compiled_preamble.sh
@@ -31,7 +31,7 @@ OUTPUT_FILE=${OUTPUT_DIR}/${SRC_NAME}.cpp
mkdir -p "$OUTPUT_DIR"
# Use the metal compiler to get a list of headers (with depth)
-CCC="xcrun -sdk macosx metal -x metal"
+CCC="metal -x metal -fmodules-cache-path=${OUTPUT_DIR}/metal-cache"
HDRS=$( $CCC -I"$SRC_DIR" -I"$JIT_INCLUDES" -DMLX_METAL_JIT -E -P -CC -C -H "$INPUT_FILE" $CFLAGS -w 2>&1 1>/dev/null )
# Remove any included system frameworks (for MetalPerformancePrimitive headers)
+56
View File
@@ -0,0 +1,56 @@
{ lib, stdenvNoCC, requireFile, nix }:
let
narFile = requireFile {
name = "metal-toolchain-17C48.nar";
message = ''
The Metal Toolchain NAR must be available.
If you have cachix configured for exo.cachix.org, this should be automatic.
Otherwise:
1. Install Xcode 26+ from the App Store
2. Run: xcodebuild -downloadComponent MetalToolchain
3. Export the toolchain:
hdiutil attach "$(find /System/Library/AssetsV2/com_apple_MobileAsset_MetalToolchain -name '*.dmg' | head -1)" -mountpoint /tmp/metal-dmg
cp -R /tmp/metal-dmg/Metal.xctoolchain /tmp/metal-export
hdiutil detach /tmp/metal-dmg
4. Create NAR and add to store:
nix nar pack /tmp/metal-export > /tmp/metal-toolchain-17C48.nar
nix store add --mode flat /tmp/metal-toolchain-17C48.nar
'';
hash = "sha256-ayR5mXN4sZAddwKEG2OszGRF93k9ZFc7H0yi2xbylQw=";
};
in
stdenvNoCC.mkDerivation {
pname = "metal-toolchain";
version = "17C48";
dontUnpack = true;
dontBuild = true;
dontFixup = true;
nativeBuildInputs = [ nix ];
installPhase = ''
runHook preInstall
nix-store --restore $out < ${narFile}
# Create bin directory with symlinks for PATH
mkdir -p $out/bin
ln -s $out/usr/bin/metal $out/bin/metal
ln -s $out/usr/bin/metallib $out/bin/metallib
runHook postInstall
'';
# Metal language version for CMake (from: echo __METAL_VERSION__ | metal -E -x metal -P -)
passthru.metalVersion = "400";
meta = {
description = "Apple Metal compiler toolchain";
platforms = [ "aarch64-darwin" ];
license = lib.licenses.unfree;
};
}
+159
View File
@@ -0,0 +1,159 @@
{ stdenv
, lib
, fetchFromGitHub
, replaceVars
, fetchzip
, cmake
, nlohmann_json
, apple-sdk_26
, metal-toolchain
, runCommand
, fmt
, python313Packages
, uvLockMlxVersion
}:
assert stdenv.isDarwin;
let
python = python313Packages.python;
# Static dependencies included directly during compilation
gguf-tools = fetchFromGitHub {
owner = "antirez";
repo = "gguf-tools";
rev = "8fa6eb65236618e28fd7710a0fba565f7faa1848";
hash = "sha256-15FvyPOFqTOr5vdWQoPnZz+mYH919++EtghjozDlnSA=";
};
metal_cpp = fetchzip {
url = "https://developer.apple.com/metal/cpp/files/metal-cpp_26.zip";
hash = "sha256-7n2eI2lw/S+Us6l7YPAATKwcIbRRpaQ8VmES7S8ZjY8=";
};
nanobind = fetchFromGitHub {
owner = "wjakob";
repo = "nanobind";
rev = "v2.10.2";
hash = "sha256-io44YhN+VpfHFWyvvLWSanRgbzA0whK8WlDNRi3hahU=";
fetchSubmodules = true;
};
mlx = stdenv.mkDerivation rec {
pname = "mlx";
version = let v = "0.30.6"; in
assert v == uvLockMlxVersion || throw "MLX version mismatch: nix/mlx.nix has ${v} but uv.lock has ${uvLockMlxVersion}. Update both the version and hash in nix/mlx.nix.";
v;
pyproject = true;
src = fetchFromGitHub {
owner = "ml-explore";
repo = "mlx";
tag = "v${version}";
hash = "sha256-avD5EGhwgmPdXLAyQSqTO6AXk/W3ziH+f6AetjK3Sdo=";
};
patches = [
(replaceVars ./darwin-build-fixes.patch {
sdkVersion = apple-sdk_26.version;
metalVersion = metal-toolchain.metalVersion;
})
];
postPatch = ''
substituteInPlace mlx/backend/cpu/jit_compiler.cpp \
--replace-fail "g++" "$CXX"
'';
dontUseCmakeConfigure = true;
enableParallelBuilding = true;
# Allows multiple cores to be used in Python builds.
postUnpack = ''
export MAKEFLAGS+="''${enableParallelBuilding:+-j$NIX_BUILD_CORES}"
'';
# Updates the wrong fetcher rev attribute
passthru.skipBulkUpdate = true;
env = {
DEV_RELEASE = 1;
CMAKE_ARGS = toString [
(lib.cmakeBool "USE_SYSTEM_FMT" true)
(lib.cmakeOptionType "filepath" "FETCHCONTENT_SOURCE_DIR_GGUFLIB" "${gguf-tools}")
(lib.cmakeOptionType "filepath" "FETCHCONTENT_SOURCE_DIR_JSON" "${nlohmann_json.src}")
(lib.cmakeOptionType "filepath" "FETCHCONTENT_SOURCE_DIR_NANOBIND" "${nanobind}")
(lib.cmakeBool "FETCHCONTENT_FULLY_DISCONNECTED" true)
(lib.cmakeBool "MLX_BUILD_CPU" true)
(lib.cmakeBool "MLX_BUILD_METAL" true)
(lib.cmakeOptionType "filepath" "FETCHCONTENT_SOURCE_DIR_METAL_CPP" "${metal_cpp}")
(lib.cmakeOptionType "string" "CMAKE_OSX_DEPLOYMENT_TARGET" "${apple-sdk_26.version}")
(lib.cmakeOptionType "filepath" "CMAKE_OSX_SYSROOT" "${apple-sdk_26.passthru.sdkroot}")
];
SDKROOT = apple-sdk_26.passthru.sdkroot;
MACOSX_DEPLOYMENT_TARGET = apple-sdk_26.version;
};
build-system = [
python313Packages.setuptools
];
nativeBuildInputs = [
cmake
metal-toolchain
python313Packages.pypaBuildHook
python313Packages.pypaInstallHook
python313Packages.setuptools
python313Packages.typing-extensions
python313Packages.wheel
python313Packages.cmake
python313Packages.ninja
];
buildInputs = [
fmt
gguf-tools
python313Packages.nanobind
python313Packages.pybind11
apple-sdk_26
];
# Tests require Metal GPU access which isn't available in the Nix sandbox.
# To run tests, build with: nix build --option sandbox false .#mlx.passthru.tests.mlxTest
doCheck = false;
pythonImportsCheck = [ "mlx" ];
passthru.tests = {
# Runs example scripts to verify MLX works. Requires --option sandbox false
# since Metal GPU access is needed.
mlxTest =
runCommand "run-mlx-examples"
{
buildInputs = [ mlx ];
nativeBuildInputs = [ python ];
}
''
cp ${src}/examples/python/logistic_regression.py .
${python.interpreter} logistic_regression.py
rm logistic_regression.py
cp ${src}/examples/python/linear_regression.py .
${python.interpreter} linear_regression.py
rm linear_regression.py
touch $out
'';
};
meta = {
homepage = "https://github.com/ml-explore/mlx";
description = "Array framework for Apple silicon";
changelog = "https://github.com/ml-explore/mlx/releases/tag/${src.tag}";
license = lib.licenses.mit;
platforms = [ "aarch64-darwin" ];
};
};
in
mlx
+5
View File
@@ -10,6 +10,7 @@ PROJECT_ROOT = Path.cwd()
SOURCE_ROOT = PROJECT_ROOT / "src"
ENTRYPOINT = SOURCE_ROOT / "exo" / "__main__.py"
DASHBOARD_DIR = PROJECT_ROOT / "dashboard" / "build"
RESOURCES_DIR = PROJECT_ROOT / "resources"
EXO_SHARED_MODELS_DIR = SOURCE_ROOT / "exo" / "shared" / "models"
if not ENTRYPOINT.is_file():
@@ -18,6 +19,9 @@ if not ENTRYPOINT.is_file():
if not DASHBOARD_DIR.is_dir():
raise SystemExit(f"Dashboard assets are missing: {DASHBOARD_DIR}")
if not RESOURCES_DIR.is_dir():
raise SystemExit(f"Resource assets are missing: {RESOURCES_DIR}")
if not EXO_SHARED_MODELS_DIR.is_dir():
raise SystemExit(f"Shared model assets are missing: {EXO_SHARED_MODELS_DIR}")
@@ -58,6 +62,7 @@ HIDDEN_IMPORTS = sorted(
DATAS: list[tuple[str, str]] = [
(str(DASHBOARD_DIR), "dashboard"),
(str(RESOURCES_DIR), "resources"),
(str(MLX_LIB_DIR), "mlx/lib"),
(str(EXO_SHARED_MODELS_DIR), "exo/shared/models"),
]
+9 -6
View File
@@ -17,22 +17,22 @@ dependencies = [
"loguru>=0.7.3",
"exo_pyo3_bindings", # rust bindings
"anyio==4.11.0",
"mlx==0.30.3; sys_platform == 'darwin'",
"mlx[cpu]==0.30.3; sys_platform == 'linux'",
"mlx-lm @ git+https://github.com/AlexCheema/mlx-lm.git@fix-transformers-5.0.0rc2",
"mlx==0.30.6; sys_platform == 'darwin'",
"mlx[cpu]==0.30.6; sys_platform == 'linux'",
"mlx-lm==0.30.6",
"tiktoken>=0.12.0", # required for kimi k2 tokenizer
"hypercorn>=0.18.0",
"openai-harmony>=0.0.8",
"httpx>=0.28.1",
"tomlkit>=0.14.0",
"pillow>=11.0,<12.0", # compatibility with mflux
"mflux>=0.14.2",
"mflux==0.15.5",
"python-multipart>=0.0.21",
"msgspec>=0.19.0",
"zstandard>=0.23.0",
]
[project.scripts]
exo-master = "exo.master.main:main"
exo-worker = "exo.worker.main:main"
exo = "exo.main:main"
# dependencies only required for development
@@ -59,10 +59,12 @@ dev = [
[tool.uv.workspace]
members = [
"rust/exo_pyo3_bindings",
"bench",
]
[tool.uv.sources]
exo_pyo3_bindings = { workspace = true }
#mlx-lm = { git = "https://github.com/davidmcc73/mlx-lm", branch = "stable" }
# Uncomment to use local mlx/mlx-lm development versions:
# mlx = { path = "/Users/Shared/mlx", editable=true }
# mlx-lm = { path = "/Users/Shared/mlx-lm", editable=true }
@@ -104,6 +106,7 @@ root = "src"
# supported platforms for this project
[tool.uv]
required-version = ">=0.8.6"
prerelease = "allow"
environments = [
"sys_platform == 'darwin'",
+123
View File
@@ -0,0 +1,123 @@
{ inputs, ... }:
{
perSystem =
{ config, self', pkgs, lib, system, ... }:
let
# Load workspace from uv.lock
workspace = inputs.uv2nix.lib.workspace.loadWorkspace {
workspaceRoot = inputs.self;
};
# Create overlay from workspace
# Use wheels from PyPI for most packages; we override mlx with our pure Nix Metal build
overlay = workspace.mkPyprojectOverlay { sourcePreference = "wheel"; };
# Override overlay to inject Nix-built components
exoOverlay = final: prev: {
# Replace workspace exo_pyo3_bindings with Nix-built wheel
exo-pyo3-bindings = pkgs.stdenv.mkDerivation {
pname = "exo-pyo3-bindings";
version = "0.1.0";
src = self'.packages.exo_pyo3_bindings;
# Install from pre-built wheel
nativeBuildInputs = [ final.pyprojectWheelHook ];
dontStrip = true;
};
};
python = pkgs.python313;
# Overlay to provide build systems and custom packages
buildSystemsOverlay = final: prev: {
# Use our pure Nix-built MLX with Metal support
mlx = self'.packages.mlx;
# mlx-lm is a git dependency that needs setuptools
mlx-lm = prev.mlx-lm.overrideAttrs (old: {
nativeBuildInputs = (old.nativeBuildInputs or [ ]) ++ [
final.setuptools
];
});
};
pythonSet = (pkgs.callPackage inputs.pyproject-nix.build.packages {
inherit python;
}).overrideScope (
lib.composeManyExtensions [
inputs.pyproject-build-systems.overlays.default
overlay
exoOverlay
buildSystemsOverlay
]
);
exoVenv = pythonSet.mkVirtualEnv "exo-env" workspace.deps.default;
# Virtual environment with dev dependencies for testing
testVenv = pythonSet.mkVirtualEnv "exo-test-env" (
workspace.deps.default // {
exo = [ "dev" ]; # Include pytest, pytest-asyncio, pytest-env
}
);
mkPythonScript = name: path: pkgs.writeShellApplication {
inherit name;
runtimeInputs = [ exoVenv ];
runtimeEnv = {
EXO_DASHBOARD_DIR = self'.packages.dashboard;
EXO_RESOURCES_DIR = inputs.self + /resources;
};
text = ''exec python ${path} "$@"'';
};
benchVenv = pythonSet.mkVirtualEnv "exo-bench-env" {
exo-bench = [ ];
};
mkBenchScript = name: path: pkgs.writeShellApplication {
inherit name;
runtimeInputs = [ benchVenv ];
text = ''exec python ${path} "$@"'';
};
mkSimplePythonScript = name: path: pkgs.writeShellApplication {
inherit name;
runtimeInputs = [ pkgs.python313 ];
text = ''exec python ${path} "$@"'';
};
exoPackage = pkgs.runCommand "exo"
{
nativeBuildInputs = [ pkgs.makeWrapper ];
}
''
mkdir -p $out/bin
# Create wrapper script
makeWrapper ${exoVenv}/bin/exo $out/bin/exo \
--set EXO_DASHBOARD_DIR ${self'.packages.dashboard} \
--set EXO_RESOURCES_DIR ${inputs.self + /resources} \
${lib.optionalString pkgs.stdenv.hostPlatform.isDarwin "--prefix PATH : ${pkgs.macmon}/bin"}
'';
in
{
# Python package only available on macOS (requires MLX/Metal)
packages = lib.optionalAttrs pkgs.stdenv.hostPlatform.isDarwin
{
exo = exoPackage;
# Test environment for running pytest outside of Nix sandbox (needs GPU access)
exo-test-env = testVenv;
} // {
exo-bench = mkBenchScript "exo-bench" (inputs.self + /bench/exo_bench.py);
exo-get-all-models-on-cluster = mkSimplePythonScript "exo-get-all-models-on-cluster" (inputs.self + /tests/get_all_models_on_cluster.py);
};
checks = {
# Ruff linting (works on all platforms)
lint = pkgs.runCommand "ruff-lint" { } ''
export RUFF_CACHE_DIR="$TMPDIR/ruff-cache"
${pkgs.ruff}/bin/ruff check ${inputs.self}
touch $out
'';
};
};
}
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-Kontext-dev-4bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["ImageToImage"]
family = "flux"
quantization = "4bit"
base_model = "FLUX.1 Kontext"
capabilities = ["image_edit"]
[storage_size]
in_bytes = 15475325472
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 5950704160
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-Kontext-dev-8bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["ImageToImage"]
family = "flux"
quantization = "8bit"
base_model = "FLUX.1 Kontext"
capabilities = ["image_edit"]
[storage_size]
in_bytes = 21426029632
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 11901408320
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-Kontext-dev"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["ImageToImage"]
family = "flux"
quantization = ""
base_model = "FLUX.1 Kontext"
capabilities = ["image_edit"]
[storage_size]
in_bytes = 33327437952
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 23802816640
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-Krea-dev-4bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = "4bit"
base_model = "FLUX.1 Krea"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 15475325472
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 5950704160
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-Krea-dev-8bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = "8bit"
base_model = "FLUX.1 Krea"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 21426029632
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 11901408320
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-Krea-dev"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = ""
base_model = "FLUX.1 Krea"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 33327437952
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 23802816640
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-dev-4bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = "4bit"
base_model = "FLUX.1 Dev"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 15475325472
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 5950704160
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-dev-8bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = "8bit"
base_model = "FLUX.1 Dev"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 21426029632
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 11901408320
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-dev"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = ""
base_model = "FLUX.1 Dev"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 33327437952
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 23802816640
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-schnell-4bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = "4bit"
base_model = "FLUX.1 Schnell"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 15470210592
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 5945589280
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-schnell-8bit"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = "8bit"
base_model = "FLUX.1 Schnell"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 21415799872
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 11891178560
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,49 @@
model_id = "exolabs/FLUX.1-schnell"
n_layers = 57
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
family = "flux"
quantization = ""
base_model = "FLUX.1 Schnell"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 33306978432
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 0
[[components]]
component_name = "text_encoder_2"
component_path = "text_encoder_2/"
n_layers = 24
can_shard = false
safetensors_index_filename = "model.safetensors.index.json"
[components.storage_size]
in_bytes = 9524621312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 57
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 23782357120
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,40 @@
model_id = "exolabs/Qwen-Image-4bit"
n_layers = 60
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
uses_cfg = true
family = "qwen-image"
quantization = "4bit"
base_model = "Qwen Image"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 26799533856
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 16584333312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 60
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 10215200544
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,40 @@
model_id = "exolabs/Qwen-Image-8bit"
n_layers = 60
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
uses_cfg = true
family = "qwen-image"
quantization = "8bit"
base_model = "Qwen Image"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 37014734400
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 16584333312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 60
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 20430401088
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,40 @@
model_id = "exolabs/Qwen-Image-Edit-2509-4bit"
n_layers = 60
hidden_size = 1
supports_tensor = false
tasks = ["ImageToImage"]
uses_cfg = true
family = "qwen-image"
quantization = "4bit"
base_model = "Qwen Image Edit"
capabilities = ["image_edit"]
[storage_size]
in_bytes = 26799533856
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 16584333312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 60
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 10215200544
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,40 @@
model_id = "exolabs/Qwen-Image-Edit-2509-8bit"
n_layers = 60
hidden_size = 1
supports_tensor = false
tasks = ["ImageToImage"]
uses_cfg = true
family = "qwen-image"
quantization = "8bit"
base_model = "Qwen Image Edit"
capabilities = ["image_edit"]
[storage_size]
in_bytes = 37014734400
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 16584333312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 60
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 20430401088
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,40 @@
model_id = "exolabs/Qwen-Image-Edit-2509"
n_layers = 60
hidden_size = 1
supports_tensor = false
tasks = ["ImageToImage"]
uses_cfg = true
family = "qwen-image"
quantization = ""
base_model = "Qwen Image Edit"
capabilities = ["image_edit"]
[storage_size]
in_bytes = 57445135488
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 16584333312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 60
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 40860802176
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,40 @@
model_id = "exolabs/Qwen-Image"
n_layers = 60
hidden_size = 1
supports_tensor = false
tasks = ["TextToImage"]
uses_cfg = true
family = "qwen-image"
quantization = ""
base_model = "Qwen Image"
capabilities = ["image_gen"]
[storage_size]
in_bytes = 57445135488
[[components]]
component_name = "text_encoder"
component_path = "text_encoder/"
n_layers = 12
can_shard = false
[components.storage_size]
in_bytes = 16584333312
[[components]]
component_name = "transformer"
component_path = "transformer/"
n_layers = 60
can_shard = true
safetensors_index_filename = "diffusion_pytorch_model.safetensors.index.json"
[components.storage_size]
in_bytes = 40860802176
[[components]]
component_name = "vae"
component_path = "vae/"
can_shard = false
[components.storage_size]
in_bytes = 0
@@ -0,0 +1,12 @@
model_id = "mlx-community/DeepSeek-V3.1-4bit"
n_layers = 61
hidden_size = 7168
supports_tensor = true
tasks = ["TextGeneration"]
family = "deepseek"
quantization = "4bit"
base_model = "DeepSeek V3.1"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 405874409472
@@ -0,0 +1,12 @@
model_id = "mlx-community/DeepSeek-V3.1-8bit"
n_layers = 61
hidden_size = 7168
supports_tensor = true
tasks = ["TextGeneration"]
family = "deepseek"
quantization = "8bit"
base_model = "DeepSeek V3.1"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 765577920512
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.5-Air-8bit"
n_layers = 46
hidden_size = 4096
supports_tensor = false
tasks = ["TextGeneration"]
family = "glm"
quantization = "8bit"
base_model = "GLM 4.5 Air"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 122406567936
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.5-Air-bf16"
n_layers = 46
hidden_size = 4096
supports_tensor = true
tasks = ["TextGeneration"]
family = "glm"
quantization = "bf16"
base_model = "GLM 4.5 Air"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 229780750336
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.7-4bit"
n_layers = 91
hidden_size = 5120
supports_tensor = true
tasks = ["TextGeneration"]
family = "glm"
quantization = "4bit"
base_model = "GLM 4.7"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 198556925568
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.7-6bit"
n_layers = 91
hidden_size = 5120
supports_tensor = true
tasks = ["TextGeneration"]
family = "glm"
quantization = "6bit"
base_model = "GLM 4.7"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 286737579648
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.7-8bit-gs32"
n_layers = 91
hidden_size = 5120
supports_tensor = true
tasks = ["TextGeneration"]
family = "glm"
quantization = "8bit"
base_model = "GLM 4.7"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 396963397248
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.7-Flash-4bit"
n_layers = 47
hidden_size = 2048
supports_tensor = true
tasks = ["TextGeneration"]
family = "glm"
quantization = "4bit"
base_model = "GLM 4.7 Flash"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 19327352832
@@ -0,0 +1,12 @@
model_id = "mlx-community/GLM-4.7-Flash-5bit"
n_layers = 47
hidden_size = 2048
supports_tensor = true
tasks = ["TextGeneration"]
family = "glm"
quantization = "5bit"
base_model = "GLM 4.7 Flash"
capabilities = ["text", "thinking"]
[storage_size]
in_bytes = 22548578304

Some files were not shown because too many files have changed in this diff Show More