Add WiFiNINA firmware update in docu.

ArduinoProps.vcxitems

@@ -32,6 +32,7 @@
     <None Include="$(MSBuildThisFileDirectory)PropsData.md" />
     <None Include="$(MSBuildThisFileDirectory)Arduino_Props.md" />
     <None Include="$(MSBuildThisFileDirectory)README.md" />
+    <None Include="$(MSBuildThisFileDirectory)WifiNinaFirmware.md" />
   </ItemGroup>
   <ItemGroup>
     <ClCompile Include="$(MSBuildThisFileDirectory)src\ArduinoProps.cpp" />

ArduinoProps.vcxitems.filters

@@ -40,6 +40,7 @@
     <None Include="$(MSBuildThisFileDirectory)ArduinoProps.zip" />
     <None Include="$(MSBuildThisFileDirectory)create-library-zip.bat" />
     <None Include="$(MSBuildThisFileDirectory)Arduino_Props.md" />
+    <None Include="$(MSBuildThisFileDirectory)WifiNinaFirmware.md" />
   </ItemGroup>
   <ItemGroup>
     <ClCompile Include="$(MSBuildThisFileDirectory)src\ArduinoProps.cpp">

Arduino_Props.md

@@ -81,6 +81,8 @@ Arduino with Ethernet or Wifi shield is suitable to build an Escape Room Props,
  - Arduino Ethernet
  - Arduino Ethernet Shield
 
+For WiFi props, please update the WiFiNINA firmware: [WiFiNINA firmware update](WifiNinaFirmware.md).
+
 To use other WiFi hardware compatible with any *<a href="https://github.com/knolleary/pubsubclient" target="_blank">Nick O'Leary PubSubClient</a>* library you have to fork `WifiProps.h` and `WifiProps.cpp` and to replace `WiFiNINA.h` whih appropriate WiFi library (`ESP8266WiFi.h` for example):
  - Arduino WiFi Shield
  - Sparkfun WiFly Shield – [library](https://github.com/dpslwk/WiFly)

EXAMPLES.md

@@ -157,6 +157,8 @@ The library comes with a number of example sketches. See **File > Examples > Ard
 
 Sketch with *WifiProps* differs slightly from code with *BridgeProps*.
 
+Please update the WiFiNINA firmware: [WiFiNINA firmware update](WifiNinaFirmware.md).
+
 
 ## 4. *BlinkOnBridgePubSub*: the Blink example on props using *PubSubClient* directly
 

Props.md

@@ -112,6 +112,8 @@ PropsAction clignoteAction = PropsAction(1000, clignote);
 ```
 The *AduinoProps* library uses **<a href="https://github.com/arduino-libraries/WiFiNINA" target="_blank">WiFiNINA</a>** WiFi library for **Arduino Uno WiFi Rev 2**, **Arduino NANO 33 IoT**, **Arduino MKR WiFi 1010** and **Arduino MKR VIDOR 4000**. 
 
+Please update the WiFiNINA firmware: [WiFiNINA firmware update](WifiNinaFirmware.md).
+
 Create *WifiProps* instance with MQTT parameters, then create *PropsData* instances and  *PropsActions*.
 
 #### MQTT topics
@@ -329,6 +331,8 @@ See [EXAMPLES.md](EXAMPLES.md) for an adaptation of the Blink example (https://w
  - Arduino Ethernet
  - Arduino Ethernet Shield
 
+For WiFi props, please update the WiFiNINA firmware: [WiFiNINA firmware update](WifiNinaFirmware.md).
+
 To use other WiFi hardware compatible with any *<a href="https://github.com/knolleary/pubsubclient" target="_blank">Nick O'Leary PubSubClient</a>* library you have to fork `WifiProps.h` and `WifiProps.cpp` and to replace `WiFiNINA.h` whih appropriate WiFi library (`ESP8266WiFi.h` for example):
  - Arduino WiFi Shield
  - Sparkfun WiFly Shield – [library](https://github.com/dpslwk/WiFly)

README.md

@@ -32,6 +32,7 @@ Add `#include "ArduinoProps.h"` on top of your sketch and start coding. Reading
 | [PropsAction class reference](PropsAction.md)          | 
 | [ArduinoProps library examples](EXAMPLES.md)           | 
 | [Arduino Props for Escape Room 2.0](Arduino_Props.md)  | 
+| [WiFiNINA firmware update](WifiNinaFirmware.md)        | 
 
 
 ## 2. Escape room 2.0 props with Arduino
@@ -173,6 +174,9 @@ More MQTT topics can be use for anything (room scenario, etc.).
  - Arduino MKR VIDOR 4000
  - Arduino Ethernet
  - Arduino Ethernet Shield
+ 
+For WiFi props, please update the WiFiNINA firmware: [WiFiNINA firmware update](WifiNinaFirmware.md).
+
 
 To use other WiFi hardware compatible with any *<a href="https://github.com/knolleary/pubsubclient" target="_blank">Nick O'Leary PubSubClient</a>* library you have to fork `WifiProps.h` and `WifiProps.cpp` and to replace `WiFiNINA.h` whih appropriate WiFi library (`ESP8266WiFi.h` for example):
  - Arduino WiFi Shield

WifiNinaFirmware.md

@@ -0,0 +1,58 @@
+# *WiFiNINA* firmware update
+
+Nowadays, fall 2019, we still receive *WiFiNINA* arduinos with firmware 1.0.0.0 version (Arduino Uno WiFi Rev 2, Arduino NANO 33 IoT, Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000).
+
+***It is highly recommended to update *WiFiNINA* firmware to latest version.***
+
+## Known issue with 1.0.0.0 version
+`WiFi.config()` does not work, we can't set static IP address.
+
+That's a very good reason to update the firmware.
+
+## Update *WiFiNINA* firmware how-to
+1. Upload *FirmwareUpdater* sketch
+2. Open **WiFi101 / WiFiNINA Firmware Updater**
+3. Test board connection
+4. Update *WiFiNINA* firmware 
+
+
+### 1. Upload *FirmwareUpdater* sketch
+
+Load the *FirmwareUpdater* sketch from **File > Examples > WiFiNINA > Tools > FirmwareUpdater**
+![](wifinina-firmware-1.png)
+
+
+### 2. Open *WiFi101 / WiFiNINA Firmware Updater*
+
+Open the firmware updater from **Tools > WiFi101 / WiFiNINA Firmware Updater**
+![](wifinina-firmware-2.png)
+
+
+### 3. Test board connection
+
+Select the board port:
+
+![](wifinina-firmware-3.png)
+
+
+And click **Test connection**:
+
+![](wifinina-firmware-4.png)
+
+
+### 4. Update *WiFiNINA* firmware 
+
+Select the latest firmware available and click **Update Firmware**:
+![](wifinina-firmware-5.png)
+
+Update process will take about a minute then you're done:
+![](wifinina-firmware-6.png)
+
+
+## Author
+
+**Marie FAURE** (Nov 13th, 2019)
+* company: FAURE SYSTEMS SAS
+* mail: *dev at faure dot systems*
+* github: <a href="https://github.com/fauresystems?tab=repositories" target="_blank">fauresystems</a>
+* web: <a href="https://www.live-escape.net/" target="_blank">Live Escape Grenoble</a>

examples/BlinkOnWifiProps/BlinkOnWifiProps.ino

@@ -40,6 +40,8 @@ bool wifiBegun(false);
 
 void setup()
 {
+  Serial.begin(9600);
+
   props.addData(&clignoter);
   props.addData(&led);
 
@@ -54,14 +56,26 @@ void loop()
 {
   if (!wifiBegun) {
     WiFi.begin(ssid, passphrase);
-	// do static IP configuration disabling the dhcp client, must be called after every WiFi.begin()
-	//WiFi.config(IPAddress(192, 168, 1, 21), // local_ip
-	//	IPAddress(192, 168, 1, 1),  // dns_server
-	//	IPAddress(192, 168, 1, 1),  // gateway
-	//	IPAddress(255, 255, 255, 0)); // subnet
+    Serial.println(WiFi.firmwareVersion());
     delay(250); // acceptable freeze for this props (otherwise use PropsAction for async-like behavior)
+    // do static IP configuration disabling the dhcp client, must be called after every WiFi.begin()
+    String fv = WiFi.firmwareVersion();
+	if (fv.startsWith("1.0")) {
+		Serial.println("Please upgrade the firmware for static IP");
+		// see https://github.com/fauresystems/ArduinoProps/blob/master/WifiNinaFirmware.md
+	}
+	else {
+		//WiFi.config(IPAddress(192, 168, 1, 21), // local_ip
+		//	IPAddress(192, 168, 1, 1),  // dns_server
+		//	IPAddress(192, 168, 1, 1),  // gateway
+		//	IPAddress(255, 255, 255, 0)); // subnet
+		//WiFi.setHostname("wifiprops");
+	}
     if (WiFi.status() == WL_CONNECTED) {
-      wifiBegun = true;
+    wifiBegun = true;
+    Serial.println(WiFi.localIP());
+      Serial.println(WiFi.subnetMask());
+      Serial.println(WiFi.gatewayIP());
     } else {
       WiFi.end();
     }