MDL-45580 introduced the readonlypages filearea, and when loading
page images for an attempt, the code would check if the pages existed
, creating them if not. The code inside this block also contained
a guard clause for the case where no readonly pages existed - which
is a situation that should not happen. Whenever readonly pages are
requested, they should exist.
MDL-66626 introduced a situation where page counts not matching would
also retrigger page generation. However this led to a situation where
the guard clause could be entered when requesting readonly pages.
This patch refactors the guard clause, and improves the logic to
regenerate pages.
When requesting the readonly version of pages (which contain
teacher annotations), they should always be available - the
PHP side even throws an exception when they're not. This
means we don't need to worry about polling document converters
from the JS side and can just return the pages immediately.
The behat step "I draw on the pdf" creates the exact same line every
time it is called. This can cause issues in a situation like the following:
- Student uploads PDF
- Teacher annotates page 1
- Student edits submission, adding another PDF
- Teacher annotates page 1 again
- When the student looks at their annotated PDF it appears the same as
before they added the second PDF (i.e., they don't see extra pages for
the second PDF)
Exactly why this happens isn't clear, and in practice this probably never
happens because the chances of drawing the exact same line twice are almost
0. However, when testing the functionality added in MDL-45580 it was causing
issues.
Only call user_update_user when the relevant user data has changed,
preventing unnecessary user_updated events. This also removes the
line setting timemodified on the user since user_update_user already
handles this.
When receiving data from the LTI launch, or service call, only update
the user record when we know something has changed. This prevents the
creation of many \core\event\user_updated events.
This isn't required and generates excess events. The only thing update
does, other than update the user fields, is to update the picture, but
in this case, that's unset in membership-based auths anyway, so it's
entirely safe to remove this.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
This is a regression when the activity pages were redessigned in Moodle
4.0. The default introduction should be displayed when the activity
description is empty.
If a plugin attempts to do something that would lock coursemodinfo cache
during install (such as creating a course module), this currently fails
as check_lock_state is not implemented in cache_disabled. Adding the
cache_loader_with_locking interface ensures that all lock methods are
implemented.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
This commit makes the following improvements to mod_imscp tests:
* Removes unnecessary @javascript and @_file_upload tags from non-JS tests.
* Removes user/enrol data generation from tests that can be performed as admin.
* Removes "I log out" and other unnecessary steps.
In this commit, the following improvements were made to the mod_lti Behat tests:
* Replaced manual steps with data generators to set completion.
* Eliminated unnecessary user and course enrolments data generation as some tests can be performed as an admin.
* Removed the @javascript tag from non-JS tests.
* Updated the LTI data generator to generate an internal Moodle URL in the toolurl field, enabling the use of XML files.
The feature added in 4.1 to lock the modinfo cache does not work when
using Redis, because:
* The API to acquire a cache lock is confusing, and the code did not
check that it successfully acquired a lock before going on to build
the cache anyway.
* Unlike the other types of cache lock, the Redis store did not retry
the lock for a timeout period before giving up and failing.
This change fixes both points.
It is perfectly legitimate to create and/or use a method named `define`
in JS outside of RequireJS.
Unfortunately our requirejs.php wrapper is dumb and does not understand
this.
In the long term we need to stop doing this at all. We really should be
able to already, but every time I try to something prevents it.
In the interim, this change adds a secondary check to see if there is an
existing define which _does_ have the right name in it already.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
Restoring multiple quizzes from a pre-4.0 backup was broken when
the quizzes shared a random question. This is because after the
first quiz created a set reference in place of the random question,
it deleted the question record so it was not there for the second
quiz to use. This change tracks the IDs of random questions so
they can be deleted at the end.
Several version checks were incorrectly using
restore_controller::info::moodle_release instead of moodle_version as a
version number. This replaces all of those checks with a common pair of
methods to make the checks clearer and more maintainable.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
// Removed test_add_malformed_favourite()
PHPUnit version >= 9.5 no longer converts PHP deprecations to exceptions by default.
To comply with PHP 8.2, which will deprecate the dynamic properties,
we need to remove test_add_malformed_favourite()
because the test will raise a warning for dynamic property deprecations.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
In PHP 8.2 and later, setting a value to an undeclared class property is
deprecated and emits a deprecation notice.
So we need to add missing class properties that still need to be declared.
Course date registration data reports correctly.
MDL-77306 added a count of how many courses there are
without start and end dates. However, all courses have
a start date, it is only the end date that is optional.
This patch fixes the data collection and makes the lang
string describing it clearer.
The previous method of hardcoded filepaths, specifically for events
belonging to core, meant that any events belongs to core subsystems
were omitted (core_customfield, core_h5p, core_payment, etc).
Previously, a set of calculated quiz statistics would only 'last' for
15 minutes. Then they would be considered invalid and not used.
Now, computed statistics are kept indefinitely. Instead, when a new
batch of values are computed for a particular set of settings, older numbers
for the same settings are deleted first. Therefore,
question_stats_cleanup_task is no more.
Previously, when users viewed the question bank, if the quiz statistics
had not already been calculated, we would try to compute them there an then.
This could be very, very slow, leading to session lock problems.
Now, we never try to compute the statistics on the fly. Instead, we rely
on the existing \quiz_statistics\task\recalculate scheduled task to do it.
There is a new method on the column class, for the column to declare any
statistics it requires. The question then efficiently loads all those
statistics in one go, and makes them available as the columns are
rendererd, or do any subsequent processing.
According to Boostrap Popovers documentation for popovers triggered
on focus:
"For proper cross-browser and cross-platform behavior, you must use the
<a> tag, not the <button> tag, and you also must include a tabindex
attribute."
This test apparently fails sporadically on Oracle, without obvious
causes. The failure however was hard to interpret, and the test
itself made a lot of assumptions about the system re. naming of
categories/courses. This could be prone to errors, so improve that.
When the H5P third-party library was upgraded to moodle-1.23, the calls to
libraryToString(xxx, true) where replaced with libraryToFolderName().
We missed this, which was doing the H5P Timeline activities weren't
displayed properly.
Thanks Joseph for raising this and preparing a patch! Well done!
Co-authored: Joseph Rézeau
Recent additions to timezones from the IANA TZDB are not necessarily
reflected in those used by the intl extension and/or ICU zones:
* America/Ciudad_Juarez
* America/Nuuk
* Europe/Kyiv
* Pacific/Kanton
Create mapping to allow these zones to be used without errors.
The apiBase in .well-known/badgeconnect.json was ignored and it was
causing some failures when connecting or sending badges to an
external backpack.
For OBv2.1, it has been changed to always use the apiBase defined
in the badgeconnect.json backpack provider.
Right now the order of the groups returned by groups_get_user_groups()
is not fixed and, every DB, can return them in any order. While 99%
of times the order will be the creation one, depending of the RDBMS
decisions, they can be returned in any order.
This is specially noticeable with Oracle, but can affect to any DB.
And that makes some tests (expecting a given order) to fail.
This commit fixes the problem by making the order of the groups
deterministic, because that's the way we use to fix these problems.
Alternative is to relax the tests so only values are asserted by
using assertEqualsCanonicalizing().
If the enrolment instance (the 'published resource') has been upgraded
from LTI 1.1/2.0 to LTI 1.3 (i.e. a new instance was not created),
prevent legacy launches which may occur from old resource links. Only
LTI Advantage launches should be permitted through the method.
If the enrolment method is updated from an LTI 1.1/2.0 tool to an LTI
1.3 tool, it may have associated enrol_lti_users records not having
ltideploymentid values. These are legacy users and must not be returned
by the repository, which deals only with LTI 1.3 LTI users.
Random failures after manually adding block instances (specifically
on slow/Oracle systems) can be entirely avoided by using the block
test generator for scenarios that are not specifically concerned with
manually adding blocks.
While the uses here were not causing too much problem with PHPUnit
execution in any OS, better have them explicitly closed to better
serve as reference for other, future uses anywhere in codebase.
Always that a stream is used, better we close it as soon as possible,
not relying on destructors, gc and friends.
And do it as soon as it's not needed any more. Else, only
_destruct() / shutdown / gc will, and that can be problematic
if many streams are open, or, under some environments like
Windows that consider the stream underlying files still busy,
because they have not been closed.
Although the screenshots in the failures for some of the scenarios in
filter/displayh5p/tests/behat/h5p_filter.feature, like "Render a local
H5P file as teacher" were displaying the expected result, there were
some javascript errors (probably due to behat is quicker and the
iframes were not always ready).
I've added one extra step before accessing the iframe to give more
time to the H5P player to load and confirm the page is displayed
properly.
* The object returned by update_question is alwasy a new clone
and the $question passed in will not be modified.
* The returned object has the fields like questionbankentryid and
the ones related to versionning, so it is more like the data
returned by question_bank::load_question_data.
The used the exist in Moodle up to 3.11, but then was removed with
insufficient thought in 4.0 (because we had grander long-term plans
which still have not happened). Until those plans happen, this
commit adds the simple link back on the preview screen.
When the two restore forms for searching courses and categories were
converted to core templates in eb9935c9 they lost the named submit
button, which broke searching.
The widgetbase module was intended to be a generic search widget,
despite its location in grade/amd/src. As such, other modules may
depend on this. This was modified in MDL-76246, which added new
requires params to the js, and changed the js to expect certain new
data attributes in the templates. This broke b/c for existing
dependents.
This patch makes sure the existing uses of the basewidget continue
to work by adding b/c code. See MDL-77991 which deals with deprecating
this search widget and replacing it with one that just implements the
desired combobox logic, without the b/c code. That issue should also
make it abundantly clear that this widget is for public consumption.
When we deprecate the use of a file, we often include tests which ensure
that the legacy behaviour is maintained. There are also legacy uses
in the community where people would like to use the deprecated API for a
period.
The issue that we face is that, if the deprecated file is included once,
then it will be included for all other, unrelated, tests. This means
that other tests may not detect cases where the deprecated file was
included.
We can solve these cases by running the test that performs the inclusion
in a deprecated process. This means that the inclusion is only performed
in that isolated process, and other unrelated tests do not include the
file.
However, we also then need to detect which files which are including the
file and which we do not know about.
This change introduces:
- an override to the TestCase::setInIsolation method to define a
constant when the test is running in isolation
- a new function that a file can call when it is included, to make sure
that the test process was isolated, where there is any test.
Move the fixed assignment removal upgrade code to the end of the upgrade
script as a new upgrade step. Already upgraded sites with mod_assignment
removed should just be able to rerun this without any issues.
When an editor is renderer initially invisible to the browser, e.g.
the forum "Add discussion" form, it has a `clientHeight` value of
zero. We can approximate an alternative value based on the number
of rows in the textarea.
Co-authored-by: Andrew Nicols <andrew@nicols.co.uk>
Previously the content of the stored file was extracted and stored in a
variable, passed around, and then submitted to MoodleNet. This results
in very high memory consumption when dealing with MoodleNet.
The stored_file should be passed around as a first-level param to
discourage this, and the content should _never_ be loaded into memory.
Instead file streams and resources should be used to allow Guzzle/Curl
to buffer the file from disk/other storage straight to MoodleNet.
This change introduces a new get_psr_stream() method to:
* stored_file
* file_system
This allows us to fetch a Psr Stream implementing the
PSR\Http\Message\StreamInterface and pass it into Guzzle, which means
that there is no need to load the entire file content into memory to
serve it.
We shouldn't invent fileareas with invalid values (specifically in
this case, the `itemid` overflowed maximum length of the field on
Oracle).
Given the generated file is transitory in nature, instead store it
in the users draft area.
It's possible to have some Moodle components soft linked instead
of being real directories within codebase (within dirroot).
For example, Composer's "vendor" directory can be soft linked
(from elsewhere), or also plugins can be installed using soft
links.
In those cases, Moodle calculates the $SCRIPT global as null. And,
then, string operations on it are emitting a PHP deprecation message
with PHP 8.1 and up.
This fix just ensures that the behaviour is the same than before
PHP 8.1, aka: ltrim(null) = '' (empty string), without any PHP warning.
The icon's iconclass context data adds additional CSS class(es) to
calendar event icons to better control how the event icon is displayed.
e.g. without filtering for activity events that don't hae monologo
versions of their icons.
Ensure the same heading tags are available as those defined in the
editor block formats configuration (c51b7e2c).
Co-authored-by: Andrew Nicols <andrew@nicols.co.uk>
From Selenium 4.8.0, support for non-w3c browser control has ended.
We only use W3C browser control these days, and this was missed as part
of the move to W3C. All browser options must be vendor-prefixed.
Evaluated usage of "Install selected language pack(s)" in Behat and
replaced the steps to use generator to install language packs as part
of test setup.
2023-03-21 11:58:30 +08:00
1023 changed files with 12288 additions and 5648 deletions
@@ -30,7 +30,7 @@ $string['errordataroot'] = '$CFG->behat_dataroot is not set or is invalid.';
$string['errorsetconfig']='$CFG->behat_dataroot, $CFG->behat_prefix and $CFG->behat_wwwroot need to be set in config.php.';
$string['erroruniqueconfig']='$CFG->behat_dataroot, $CFG->behat_prefix and $CFG->behat_wwwroot values need to be different than $CFG->dataroot, $CFG->prefix, $CFG->wwwroot, $CFG->phpunit_dataroot and $CFG->phpunit_prefix values.<br/>Or, if $CFG->behat_prefix is the same, $CFG->behat_dbname or $CFG->behat_dbhost need to be different from $CFG->phpunit_dbname and $CFG->phpunit_dbhost and from $CFG->dbname and $CFG->dbhost.';
$string['fieldvalueargument']='Field value arguments';
$string['fieldvalueargument_help']='This argument should be completed by a field value. There are many field types, including simple ones like checkboxes, selects or textareas, or complex ones like date selectors. See the dev documentation <a href="https://docs.moodle.org/dev/Acceptance_testing" target="_blank">Acceptance_testing</a> for details of expected field values.';
$string['fieldvalueargument_help']='This argument should be completed by a field value. There are many field types, including simple ones like checkboxes, selects or textareas, or complex ones like date selectors. See the dev documentation <a href="https://moodledev.io/general/development/tools/behat" target="_blank">Acceptance_testing</a> for details of expected field values.';
$string['giveninfo']='Given. Processes to set up the environment';
$string['infoheading']='Info';
$string['installinfo']='Read {$a} for installation and tests execution info';
Most Moodle icons are rendered using the 6.3 versions of [Fontawesome](https://fontawesome.com/v6/search). Iconnames are mapped from the Moodle icon name to the Font Awesome icon names in `/lib/classes/output/icon_system_fontawesome.php`
Most Moodle icons are rendered using the 6.4 versions of [Fontawesome](https://fontawesome.com/v6/search). Iconnames are mapped from the Moodle icon name to the Font Awesome icon names in `/lib/classes/output/icon_system_fontawesome.php`
If needed a theme can override this map and provide its own mapping.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Ilya Tregubov