We created a list of placeholder selectors in placeholderSelectors option.
The purpose of this list is to indicate the contents that are only shown
in the editor and not to the users, by that way, we can decide to apply or
not to apply rules, styles, etc... to these contents
PHP before version 8.1 automatically converted to int if the function
parameter (or array key) is expected to be int. PHP 8.1 shows notice in
this case
PHP before version 8.1 automatically converted stdClass or 'false' to arrays if
function parameter expects array (for example, "reset").
PHP 8.1 shows notices in these situations
Allow users to see their own private messages even if they don't have
mod/forum:readprivatereplies capability
Add behat test to avoid MDL-67109 issue.
Co-authored-by: Martin Putzlocher <mputzi@users.noreply.github.com>
At the moment, quiz_statistics\task\recalculate gives no useful
information about what it is doing, which makes it hard to investigate
if the task fails. This commit makes it more usefully verbose.
Also, following this change, one instance of this task will not
run for more than one hour at a time.
As part of this commit, I have added a new helper mtrace_exception.
to consistently log exceptions in scheduled tasks. It is sad to
add a new function to moodlelib.php, but that seemed the logical place.
Looking at other tasks, this method is badly needed. Many are just
logging the ->getMessage() which is normaly insufficient for proper
debugging. However, swiching all existing tasks to use the new function
will need to wait for a future MDL.
Since the <ul> and <li> elements for listing the quiz questions and
elements are mainly used for layout purposes, it is better to set the
role of these elements to presentation only.
The aria-label for the <li> element is inappropriate and can also cause
confusion to screen reader users. Better to remove this. Though this is
being used in the confirmation modal so better to just change it to a
data attribute.
Since the <ul> and <li> elements for listing the quiz questions and
elements are mainly used for layout purposes, it is better to set the
role of these elements to presentation only.
Add a default sr-only section heading in order to prevent having an
empty heading for the quiz section which is not good for accessibility.
Plus:
- There's also an existing issue where filters are never applied to
section headings on load. This has been fixed in this commit as well.
- Button role added for the edit section button which enables it to
take advantage of the theme highlighting when it receives focus.
As in MDL-74691, we need either or both of these fields, meaning either
one could be omitted. This just supports that as per the fix made in
MDL-74691.
This covers the following cases:
1. Where only the 'lineitem' service endpoint is provided
2. Where only the 'lineitems' service endpoint is provided.
Existing tests already cover the case where both are provided.
- Markdown is saved to the DB, no conversion to HTML to keep
ability to reedit the content without beaking it.
- Blockquote element is styled that it's distingishable from
normal text.
Displaying the course card menu only on hover is bad in terms of
accessibility as it prevents keyboard-only users from accessing the
menu. So it's better to always display them.
Including in this commit:
- Prevent the tour to be displayed if the CSS is disabled by the browser
- Removed redundant tabindex=0 attribute on the target
- Created extra code to re-calculate the suitable position of the tour
- Fixed tour issue in 200% and 400% zoom
- Fixed tour highlight is not correct in 200% and 400%
When the param string contains a left curly bracket as the first character,
the system will assume the string is a JSON string and will be parsed and returned as an object.
But in some cases, the string is not JSON and will return an error if the system parses it.
For example, a user might have used the course name with a left curly bracket as the first character.
Adding a double quote after the left curly bracket to differentiate between string and JSON string,
so it can be safe to parse the string.
The new library version should work without problems with older
php-mongodb extension versions:
- v1.15.0 (paired version, tested).
- v1.14.1 (tested)
So, here, in 401_STABLE, we aren't raising the requirements. We have
done that in master, in order to get php82 support, but not here. For
more details about compatibilities, see:
https://www.mongodb.com/docs/drivers/php/#compatibility
This updates the library from v1.13.1. Fixes some php81 warnings
leading to failed/risky tests.
The new library version should work without problems with older
php-mongodb extension versions:
- v1.15.0 (paired version, tested).
- v1.14.1 (tested)
Webservice doesn't need to set the page URL. Hence,
any function that requires a page URL will raise debugging output.
The patch fixes it by adding a fake URL for the webservice.
The patch also removed assertDebuggingCalled because it is no longer needed.
This will find all data generators that can be used in behat via the
'the following "something" exist:' step, and display them in a select
list on the step definitions page.
When a generator is selected, it will fetch the required fields for that
generator and display them on the page.
jQuery submit events do not trigger the native submit event, and
therefore the TinyMCE submit listener is not called. This means that the
tinymce.triggerSave() function is not called, and the editor content is
not saved.
To work around this, if there is a form for the Node that the editor is
attached to, the jQuery submit event is listened to and the save event
called.
Unfortunately it is not possible to use a global jQuery submit listener
added to the document to save all editors on the page.
In some cases, this is too late because the bubbling process means that
a child node consumer may attempt to consume the data before the
delegated handler is called for the document.
This change reduces the priority of the shipped phpcs configuration to
allow for local overrides.
This is beneficial in several situations:
- when users wish to apply stricter or additional standards
- when the integration team wishes to trial new rules
If the default dashboard contained a block that was missing from disk
then "Exception - Call to a member function instance_copy() on bool"
was shown to users. This change only shows an error with debugging
enabled which now includes the name of the missing block.
Use the full result from download_file_content within the component
installer to ensure that spurious debugging is not emitted during
operation. Handle validation of the returned data consistently.
Under some linux versions, and depending of the configured
locale categories, it's possible to get a current locally
which length > 255 when calling to setlocale(LC_ALL, 0).
Later, if that long locale is tried to be restored, there
is a "setlocale(): Specified locale name is too long" warning
error.
When that happens we need to split the long locale into
individual chunks and set all the (six) locale categories
supported one by one.
Covered with tests, note that, in practice, this only
happens with linux because it supports 12 locale categories
@ OS level. Both BSD (6) and Windows (5) hardly can reach the limit.
No matter of that, the tests have been designed to ensure that
they pass on all OSs, just the new code only will be executed
on linux.
This part of the code in 'question_category_object.php' 'update_category' method was used before Moodle 4.0 version for renaming
the random questions in an updated category. For Moodle 4.1, it is unnecessary as the details of random questions are no more
stored in 'question' table but in 'question_set_references' table. The method call move_question_set_references handles the same.
AMOS BEGIN
MOV [config_recordings_sortorder,mod_bigbluebuttonbn],[config_recordings_asc_sort,mod_bigbluebuttonbn]
MOV [config_recordings_sortorder_description,mod_bigbluebuttonbn],[config_recordings_asc_sort_description,mod_bigbluebuttonbn]
AMOS END
We will not calculate old maker position again and using old data.
This will make sure the position of makers is correct
when the background image is smaller than dropzone.
Remove negative margin from the "clear my choice" anchor.
With the negative margin, when the containing box height is calculated
the anchor's hidden style overflows beyond the boundary and triggers
the overflow:auto to add a scroll bar.
... or anything else with length = 0. This got broken in MDL-71696.
The only way to fix this kind-of involves and API change to
quiz_report_get_significant_questions. However, it is only changing
the external API of this function back to how it was before the 4.0 release,
and the chnages in 4.0 were never documented, nor, I would guess, intended,
since they just broke things.
When the site uses custom user text fields that would show up in a
user list, the filter for firstname or lastname didnt work anymore.
If a filter was used, no result would show up. Users where shown only
when the course reports where used without filters.
This commit adds an additional environment check for the unsupported
PHP 8.1 version to Moodle 3.9.x, 3.11.x and 4.0.x.
It also updates the lang string for unsupported PHP version.
Signed-off-by: Daniel Ziegenberg <daniel@ziegenberg.at>
It was detected that 'This month' option may cause failures in builds in between months
so using the 'Recent and next 60 days' still fixes the weekend scenario and also the
in between months issue.
In some cases, we get an error message such as:
Wrong parameter count for Redis::zRem()
Within the delete_many function. This function requires at least one
key to be supplied, but if delete_many is called with an empty array,
we will call it with no keys.
This changes a couple of cases, in postgres and oracle where we
were trying to calculate strlen() on null values (that causes a
PHP 8.1 warning).
Also, at the same time, fixing another case in xmldb_field, it
was detected that it had a bug around precision (being set to the
value of type), being used as object property, when it's not, so
it was also fixed by moving the code logic a little bit.
Note that the bug has been there since inception because there
isn't any code in Moodle using that ->precision property. It
was just detected thanks to PHP 8.2, but that's another story. :-)
Verified that with the patch:
- All DBs can be installed (phpunit install)
- Both DDL and DML pass without any ddl/dml warning (in all DBs).
This is necessary because 'This week' option is conditionally
hidden on weekends making behat builds to fail on those days.
Also, the last two steps had to be split because Bennu library
adds days with leading zero and moodle removes it by default.
Including in this commit:
- Convert existing Behat scenario to use Data generators
- Convert existing Behat scenario to use Provider
- Add new scenario for Include users setting in General restore page
When the keyword participant filter was used with multiple values
in conjunction with other participants filters, the boolean logic
was effectively:
X AND Y OR Z
When what we actually wanted was:
X AND (Y OR Z)
Set type of the report paging setting to integer, to ensure usage
of it is predictable. Unsupported operated type errors were thrown
on PHP8.0 when it's value contained a string or was empty.
Prior to this change, all the line endings in the imported HTMLPurifier
library were using CRLF (\r\n aka Windows style), but the HTMLPurifier
source and also the downloadable artefacts use LF (\n aka Linux style)
as line endings. This has been the case since
510d190382 when with the commit
"MDL-38672 import HTML Purifier 4.5.0" all line endings were changed
from LF to CRLF. There was no comment in the commit on why this change
was done.
As the original source uses LF, this commit partly reverts
510d190382 and goes back to LF as line
endings.
Signed-off-by: Daniel Ziegenberg <daniel@ziegenberg.at>
Fixed problems in lateral navigation and grading when
a SCORM has more than three levels
The SCORM module has problems with full screen display,
completion tracking and grading in SCORM.
Also resolves issues MDL-74992, MDL-73249, MDL-75407
This adds a new method to the assignfeedback edit pdf library
to specify user data file areas that will return just the meaningful
annotated feedback pdf.
get_file_areas has been updated for this plugin to return all
file areas related to assignfeedback_editpdf, and should stop
producing orphaned files and records when a course reset is done.
Thanks to @toniginard who provided a base solution for me to work
off.
The method already loaded the validated persistent model data on the
previous line, there's no need to do it again (while also trying to
load unvalidated properties).
The assumption that the settings checkbox always stores boolean values
(e.g. 0/1) isn't correct. The `perfdebug` configuration instead uses
the values 7/15.
Default value of the $flag argument changed in PHP 8.1 from ENT_COMPAT to ENT_QUOTES | ENT_SUBSTITUTE
To ensure consistent behavior across different PHP version the second parameter is now required for the functions:
htmlspecialchars(), htmlentities(), htmlspecialchars_decode(), html_entity_decode() and get_html_translation_table()
The autosave is reset on form submission, but if that form submission
happens at the same time as a page reload, the connection and/or server
is slow, then the connection may be aborted before the session is
removed.
This commit changes the autosave reset to use the fetch() API with a
keepalive flag.
Unfortunately we do not have a formal endpoint for this in Moodle JS so
this is a hackier approach than I would like. MDL-76463 has been opened
to investigate this.
This commit also fixes a situation where the autosave content is re-sent
when the user has typed in the editor and their next action is to click
on the submit button. This is now blocked for that editor instance.
Bootstrap core's "reboot" sets a default text-align which is
incompatible with RTL languages.
Arguably this should be set in the Boost theme, but this is a fairly
large change which has potential to break things so I'm making it here
where we experience the issue for now.
This case was left not changed @ MDL-72509, and detected by the
Moodle 4.1 apache logs review @ MDL-76064.
Not much to say, just switch to the core lang string, the other
is deprecated for 4.1 and up.
TinyMCE uses a magic langstring only present in RTL languages which
makes it hard to automatically fetch from their strings.
Since it's the only magic string I can find a reference to (after
searching their codebase), I've elected to add this in the lang.php
serving layer. This allows us to use our own langstring instead of
re-declaring something that should be stored once across Moodle.
Since phpCAS v1.6.0, a required base service URL parameterneeds to be
passed to phpCAS::client(). This is basically the protocol, hostname,
and port number (optional) of the site connecting to the CAS server
in order for it to perform service URL discovery.
AMOS can only cope with string identifiers with a length < 100
characters. Our tooling for Tiny automatically generates string idents
based on the language string and these can end up longer.
This change modifies our generated idents to be capped at 90 characters.
Atto mixed vertical and horizontal alignment into a single selection,
which does not make any sense. It also used CSS classes in such a way
that those styles will break if/when Atto is removed.
This commit:
* removes the horizontal alignment from the dropdown - these are easily
achieved using the existing Tiny UI
* addresses a bug where existing styles (like horizontal alignment) were
not preserved when editing the image
* fixes a bug where the CSS selector was used instead of a CSS class
name
* recognises legacy TinyMCE class names and replaces these
* switches from using random class names to using Bootstrap class
utility classes for vertical alignment.
The Atto preview plugin does not support Moodle filters. This commit
disables it for now with the intent that in a future release we may
replace it with a Moodle version which applies our filters correctly.
* Guest URL and passwords are not supposed to be included in the backup
file so they should be excluded in assert_bbb_activities_same.
* Removed redundant entry 'course' in the filter list as well.
* Provide a way for external participants to be invited to a meeting by giving them an url/password
for external users (not registered in Moodle)
* Add guest access page with username and password prompt
* Add form and modify API calls to take into account guest login
* Add a form modal to add guest users emails
* Allow copy of link and password in both popup form and module form
* The guest should be approved by default. It should be intentional to let them
in without checks.
* Guest access URL and password should not be copied when duplicating or backing
up the activity.
* The mod_bigbluebuttonbn_meeting_info web service function now
returns guestjoinurl and guestpassword only for moderators.
* Redirect if user already logged in
Note: this will allow guest to connect to an existing and running meeting. The moderator will then
be able to adjust the guest user's right. For security reasons we do not yet allow moderators
to join the meeting directly (or start a meeting)
Fixes the inapropriate attribution of the 'reporttable' css class.
This class should be only attributed to the html output related to the
the report table.
Added navigation links similar to user report page.
Removed top paging bar. Bottom paging bar and select per page
are moved on same level with next/previous links.
The override and exlude links are removed form the table header because
a new bulk actions menu will be used (see MDL-75455).
Co-authored-by: Shamim Rezaie <shamim@moodle.com>
Creates a single action bar class to output the action elements in
the single view report. Also, enables the singleview report class
to set and return the appropriate item selector (in raw HTML)
based on the currently selected single view item type.
Updates the Aiken Format class to process answers correctly, enabling
support for special HTML characteres such as <, >, and &.
Co-authored-by: Leticia Luz <leticia.adrielli.luz@gmail.com>
This commit removes several contentious formatting options for now,
pending further consideration, in particular it removes:
- forecolor
- backcolor
- fontfamily
- styles
The two color plugins are written in such a way that the chosen colour
is embedded into a style tag in the generated content. This is not
ideal as it removes these decisions away from theme developers and upon
theme changes to a site, is likely to lead to inaccessible and/or broken
content.
We feel that a new colour plugin will be required which links to known
colour style classes within the theme to allow a subset of colours which
are guaranteed to work with the theme.
The fontfamily plugin is removed pending further administrator
configuration in a future release.
In the case of the 'styles' plugin, this duplicates large parts of the
Format menu into which it is placed but does so in a way that does
respect the configuration of other areas - for example the block_formats
tag is ignored in this menu.
Part of MDL-75966
The template plugin is a part of Tiny, and requires us to create an
administrator UI to configure the templates.
This requires much more thought on workflows, intent, and so on so we'll
park it for later.
Part of MDL-75966.
Part of MDL-75966
This commit adds a cache-busting loader API for use in the TinyMCE
plugin.
This is not for use in any TinyMCE subplugins at this time as we have no
use-case outside of AMD modules.
This loader ensures that only files within the js/tiny directory are
loaded, and it only supports either .js or .css files at this time.
The client-side of the loader makes use of the jsrevision as a
cache-buster, including for CSS files included with TinyMCE.
If the revision is negative, then files are not cached.
If the revision is positive, then the requested file is cached in a
candidate file and served using aggressive cache headers.
Part of MDL-75966
Add support for translation of the TinyMCE interface.
TinyMCE translates English language strings rather than keys, and a tool
to perform this translation is included.
Part of MDL-75966
This commit adds TinyMCE version 6.1 into Moodle core.
A basic editor implementation is included, along with Moodle loader, and
basic Plugin API for Moodle. The Plugin API will be extended and
improved in future changes.
A new subplugin is defined for this plugin.
- The current item should be focusable otherwise the focus will be lost
as soon as a user clicks on an item in the initials bar
- Modified behat tests to not mistakenly click on the 'All' link
- Use the nav tag because each item in the initials bar is a
navigation link within the current document
- The currently selected item is specified by aria-current
- Useed aria-current=true rather than =page because the links of each
item in the initials bar is missing the pagination information
* In preparation for the guest access trigger button, move the join session
button to the right
* Fix id in the templates to be more consistent
* Fix issue with room refreshing process so it replaces the node instead of node content.
This commit implements the bulk action api to allow multiple bulk
actions from the qbank plugins instead of one. Any qbank plugin
wants to implement bulk action can now define an array of bulk
actions as a plugin feature.
An improvement has been added to the H5P tests to avoid random errors
due to the fact that H5P content needs a while to be displayed.
Co-author: Ferran Recio <ferran@moodle.com>
These pages sit under the 'restore' and 'copy' menu items respectively
but the selected menu item isn't correct because the 'restore.php' and
'copyprogress.php' page URLs don't match the node action for their
respective 'restore' and 'copy' nodes. Force set the selected node in
each case to resolve this.
Allow pages to choose which course reuse overflow node is selected, to
handle cases where the default selection (based on matching PAGE->url
to the node action URL) isn't possible (such as when several pages need
to exist under the same selected node).
If member sync runs before the user launches the tool, a partial record
is created, without consumer secret. Subsequent launches of the tool by
that member don't resolve this and this results in grade sync failing
for any affected users. This patch:
- data fixes the existing affected rows
- fixes the launch code, ensuring secret is recorded on launch,
irrespective of whether the user info record has been created already
or not.
Although we're not currently supporting the H5P Hub, the hubIsEnabled
setting was set to true (probably by mistake).
It has been changed to false by default because the new version of
the H5P editor library is causing some errors otherwise.
Trivial change, only point is that, for the h5p library it was
agreed that it's better to just remove the "sample" directory
completely when importing the library.
This partially reverts MDL-73270, where some useful environmental
checks and notifications in the admin UI were added to inform
about different parts of Moodle relying on the "unsupported"
php-xmlrpc extension.
Since then, some changes have happened in core, only available
for Moodle 4.1 and up (see the MDL-70889 mini-epic). Namely:
- MNet (SSO, roaming, auth, enrol and Mahara portfolio) are not
using the php-xmlrpc extension anymore, but a pure php library.
- The xmlrpc webservices protocol, has been move from core to
the plugins directory, although it continues using the php-xmlrpc
extension.
Because of that here we are removing all the checks and notifications
related with MNet (not using the extension anymore), but keeping the
webservice plugin ones (still using the extension). Surely if some day the
protocol stops using the extension, we'll be able to remove the
corresponding checks too. But that's future.
Note the associated lang strings have been also removed (not deprecated)
because they were highly specific and hardly reusable:
- xmlrpcmaharaenabled
- xmlrpcmnetauthenticationenabled
- xmlrpcmnetenabled
And very same applies, because MNet doesn't contain anything deprecated
or not supported anymore, hence, straight deletion, to the function:
- mnet_get_deprecation_notice()
Also, related tests using any of the removed stuff above have been deleted.
In the other side, the "check_xmlrpc_usage" continues existing and
being used both by environment checks and admin notifications but,
as commented above, now it only looks for the xmlrpc webservice
protocol now.
For Moodle 4.1 and up, the php-xmlrpc is not needed anymore:
- All the MNet stuff has been moved to use php library (MDL-76055).
- The webservice/xmlrpc has been moved from core to contrib (MDL-76052).
So we just remove the check here. Starting with 4.1, it's not
needed for any core functionality.
Note that the string has been removed, and not deprecated, because it's
a non-generic string, not belonging to core/moodle main lang file, and
hardly reused ever. That fits with the allowed deletions, not requiring
any deprecation.
Of course, the lang removal only has been applied to master (4.1dev).
Older branches still keep it and will be used when checking < 4.1
upgradability.
The wiki_extend_navigation is using $PAGE->url when it is not allowed
to. Extending navigation can be invoked in an Ajax request so it should
not use $PAGE global.
Including in this commit:
- New method called get_number_of_unanswered_questions() for getting the unanswered questions
- PHPUnit and Behat tests for the new dialogue
- Changed the title from "Confirm" to "Submit all your answers and finish?"
- Changed the content from "Once you submit, you will no longer be able to change your answers for this attempt."
to "You will no longer be able to change your answers for this attempt."
- Changed some Behat scenarios to match with the new dialogue content
Because @coversDefaultClass doesn't indicate any coverage (it's
just an alias to avoid having to write the class name in @covers),
this commit fixes all the files that were using that annotation
and missing any @covers.
Basically, replacing one by the other and done.
It has been detected that there are various uses of the plugins
breaking the inter-communication principles, with core_webservice
implementing functionality plugin-dependent that should belong
to the plugins.
Because of that, https://tracker.moodle.org/browse/MDL-76078 has
been created and we have added some TODO/@todo comments in core
pointing to that issue, for further analysis and fixes there.
Normal removal procedure:
- Remove the plugin completely from core.
- Document it in the webservices upgrade.txt file.
- Add a core upgrade step to proceed to remove any configuration
if the plugin has not been re-installed manually.
Plus:
- Remove a few remaining uses in the hub/sites registration scripts,
that were moved from xmlrpc to hand.made rest calls by MDL-31436
(Moodle 3.4.1 and up) and never removed then.
- Remove the php-xmlrpc extension as a recommendation in composer.
- Remove "xmlrpc" from various comments, trivial cleanup.
Note:
- While working on this MDL-76078 has been created about to
fix a serious design problem detected (it does not affect
functionality). That's out from this issue scope.
This commit will implement in place editing for the
qbank view where users with permission can edit the
title of the questions from the quesion bank view.
* BBB has specific completion indicator that need to be taken into account
* Fix mock requests so we can send participant id and then attach events to them
* Refactor slightly the broker to split meeting logic from request (decoding)
* Fix update completion state cron
These steps have accepted a NodeElement instance as an argument for some
time, but were trying to cast it to string when formulating exception
messages, making it harder to debug and, in the case of the 'should see'
step, not work at all.
This patch introduces a new function to produce a consistent naming for
them.
This commit adds new steps related to action menus to support:
* Choosing an item in a named action menu
* Choosing an item in a named action menu within a container
* Confirming that an action menu item does or does not exist in a named
action menu
* Confirming that an action menu item does or does not exist in a named
action menu within a container
The existing action menu steps were insufficient as they assume that
there is only one action menu within he container, which is not
necessarily the case.
The existing action menu steps are not non-JS friendly and will error if
JS is disabled, without providing any fallback when one is easily
available.
Unfortunately these steps cannot be used to replace the existing steps
without manual intervention.
* When the language pack being deleted is
- the same as the site default language, we must set the site default
language to 'en'.
- fix the user's current language to the default site language.
- Linking classes/methods mentioned in PHPDoc with @see tags help devs
checking the PHPDoc to quickly navigate to the class/method mentioned
and also helps us ensure that it points to the correct class/method.
- Some typo/grammar fixes as well in existing PHPDoc descriptions.
- Fixed parameter type in execute()'s PHPDoc block.
This change makes the JS in for preset management more resilient.
Previously, if the button was not on the page then an error was thrown.
Instead this code changes the listener to listen to the document and
filters the clicked element based on the same selector. This is a much
safer approach as it will not error if the selector was not found on the
page.
In this case the behat test introduced elsewhere in this issue is
testing a scenario where the Save as preset button is not present
because there are no fields to store as a preset.
This service is different from the rest because it
doesn't run encrypted, but plain xmlrpc. Hence, we
cannot use the normal mnet_xmlrpc_client (that provides
on-the-fly encryption and signing).
So, instead, let's instantiate a custom client here
and use it for this pure xmlrpc request and response.
PS: It's curious that this exact sevice has support
for proxies but the mnet_xmlrpc_client one has not. I'm not
going to modify that here, but have left a comment
in the code about that.
PS: Some small style changes have been applied around
the modified code (spacing, &&, comments...)
Basically this fixes MDL-70833 that was reproduced while
testing the update_enrolments requests. Summary:
- Fixes a typo in table name preventing it to be updated ever.
- Fix outer join that was missing records.
- Stop playing and mixing ids (local and remote).
- Better control which enrolments have to be kept (previously
they were being deleted immediately after creating them).
- Improve the coding style of inserts.
- Modernise the deletions to use sql helper and to work with 0..n ids.
Completely remove all uses if the xmlrpc php extension in
the client and replace them by the phpxmlrpc library.
Very noticeably, remove all the uses of the curl extension
and use phpxmlrpc own curl support.
Working ok for moodle-moodle/mahara sso and mahara portfolio export.
This patch should fix a regression introduced in MDL-75171, raised
while running the OBv2.1 certification.
The new method get_raw_userinfo() can return stdClass or false but
the second one was not taken into account from get_userid() (so an
error was thrown: "Argument 1 passed to
core\oauth2\client::map_userinfo_to_fields() must be an instance
of stdClass, bool given").
Introduces a new method get_element_type_string() in grade/lib.php
which returns the appropriate string that describes the type of the
grade item element.
Outputs the relevant tertiary navigation actions based in index.php,
the prev/next user navigation and removes the old trigger buttons for
the group and user selector from the zero state page.
Fixes the enrol_lti_users.consumersecret field for LTI 2.0 users.
This field erroneously contained the tool secret and not the consumer
secret needed for service requests when used with LTI 2.0 consumers,
which resulted in complete grade sync failure for LTI 2.0 consumers.
This patch:
- adds an upgrade step to address existing incorrect secrets for LTI
2.0 launched users. It sets these to the correct consumer secret.
- fixes the way the secret is first set during a launch, ensuring
this->consumer->secret is used, which properly captures either the
tool secret (for 1.1 launches) or the consumer secret (for 2.0
launches).
Adjusts the testing scenarios so that we don't rely on endpoint
discovery being run during an issuer edit, which is no longer the case.
For scenarios that need a userinfo endpoint, set this manually.
In cases where we have an id, load the persistent and then set new data
before saving. This ensures we don't delete fields which are missing in
the form data.
On the Database page:
- The List/single view is displayed in the right.
- The buttons Import entries, export entries and Export to portfolio
have been moved to the Actions menu.
- The List/Single view headings have been removed.
- The "Save settings" secondary button is hidden when advanced search
is enabled.
- The result (Found X out of Y entries, No records found) are not
displayed as notifications anymore.
On the Presets page:
- The buttons (Import, Export and Save as preset) have been moved to an
actions menu to the tertiary navigation. Some of these options have been
renamed.
- Remove the Action column heading from the table.
On the Presets preview page:
- Move the preset name to the heading in the tertiary navigation (Preview
of xxxxx), and remove the current preset name from the page.
- Align the List/single template to the right in the tertiary navigation.
- Make primary the "Use this preset" button.
On the Fields page:
- Remove the "Manage fields" menu.
- Remove the Export and Save as preset from the tertiary navigation.
- Align Create a field to the right in the tertiary navigation.
- Add a description at the top of the page.
- Remove the Action column heading from the table.
- Move field actions (Edit and Delete) to ellipsis.
On the Templates page:
- Move Export and Save as preset to the Actions menu.
- Move the templates list to a tertiary navigation selector and remove
the template heading.
- Reorder the templates list (Add entry template should be displayed
at the begining, instead of List template).
- Rename "Enable editor" to "Enable code editor".
This allows admins to configure whether contact site support is
available to everyone, authenticated users, or nobody.
The behat testing checks linked and direct access for each setting,
as well as adding testing that the support page override works as
expected.
* Use a modal instead of a standard page to select the preset file
and import it.
* Change the zero state import button to a modal dialog so it uses the same
workflow as on the preset page
Added a new element to wrap filter control in Course Overview,
so it will display well on desktop and mobile.
Co-authored-by: Huong Nguyen (huongnv13@gmail.com)
* The setting "Display mode" modifies the choices alignment of radio choice button
from horizontally to vertically. It should also display the list of choices in
the graph in the same directions.
Disables filipping the dropdowns up or dynamically repositioning
them along the y-axis to prevent them getting hidden behind the
navbar or them covering the trigger element.
Each template should display at the top the information about the
user who has created the entry, when it was created and modified.
Apart from that, this commit also includes:
- For the Journal preset, a link on each card entry title has been
added, to open the Single view.
- For the Resources preset, the Author field has been renamed to
"Author of resource" and the Description to "Content".
- For the Resources preset, the Author and Type fields will be
hidden in the List view for small devices.
Apart from removing the "List view" and "Single view" h2 headings,
the presets and templates must be also reviewed to confirm no
heading is skipped (so h2 > h3 > h4 ...).
For the Journal preset, the "Reflections" heading has been removed
here too.
This commit addresses a race condition when showing the message drawer
and opening the settings page from the Message preferences page.
In that situation, the message/edit.php page calls the
message_drawer_helper.showSettings function, which publishes a request
to show the drawer.
In some conditions (notably faster machines, or after MDL-66107) this
event is fired before the message_drawer.init has listened to it.
The solution here is to delay firing of the event until the drawer
announces itself as ready.
This ensures that the event is subscribed to before it is fired.
The lock ensures that multiple conversions do not happen for the same
assignment submission.
Otherwise, subsequent conversions will fail when trying to save the
converted file.
Polling conversions will run the document conversion immediately if the
conversion has not already been completed.
Releasing the session lock while doing this ensures large conversions
do not unnecessarily hold the users session.
Before PHP 8.1, the mysqli extension had MYSQLI_REPORT_OFF as default setting.
With PHP 8.1, it has been changed to MYSQLI_REPORT_ERROR|MYSQLI_REPORT_STRICT
The native driver is not ready to work with this new reporting level,
see MDL-75761 about to considering to improve it.
So this change just ensures that we continue using MYSQLI_REPORT_OFF
with any PHP version.
Create new entities for exposing report data on course groups and
groupings, joining to existing course/user entities to provide data
for the reportbuilder editor.
Also ensure that if course reuse contains only a single node (e.g.
reset), then it is still accessible from secondary navigation.
Co-authored-by: Meirza Arson <meirza.arson@moodle.com>
MDL-73727 aimed to improve the performance of the
get_conversions_for_file SQL. Unfortunately it also
changed the behvaiour of the SQL.
On further investigation, there is nothing wrong with
the SQL. This patch returns it back to its initial state.
Create entity definition containing report elements for blog posts.
Add new report source joining the entity to existing user, course
and tag entities to provide data for the reportbuilder editor.
Create entity definition containing report elements for notes. Add
new report source joining the entity to the user/course entities to
provide data for the reportbuilder editor.
The "Services and support" and "Contact site support" links were
missing from the footer in the Classic theme (which now has its own
footer template), so there was no way to navigate to the relevant links.
- Add scrolling to big filter containers to avoid them to be hidden under header
- Remove custom reportbuilder scrollbar mixin and replace it with 'thin-scrolls'
standard mixin
The mnet_environment->keypair array contains the following
elements (and more, just focussing on these):
- keypair_PEM : textual representation of the private key.
- certificate : textual representation of the public key.
- privatekey : OpenSSLAsymmetricKey representation of the private key,
generated from keypair_PEM. See get_private_key().
- publickey : OpenSSLAsymmetricKey representation if the public key,
generated from certificate. See get_public_key().
The last 2 elements in the array are only used as "caching", to avoid
having to call to openssl_pkey_get_private() and
openssl_pkey_get_public() to convert from the textual representation
to the OpenSSLAsymmetricKey representation that is the one required
by a number of openssl functions.
Problems arrive when, as part of the MNet protocol, the mnet_environment
is serialised, because, since PHP 8.0 those OpenSSLAsymmetricKey objects
aren't serialisable any more.
So, as far as they are only used for internal caching it's perfectly ok
to remove the caching bits and use the openssl_pkey_get_xxx() methods
to calculate them under demand.
The alternative to this would be to implement into the mnet_environment
some custom serialisation, skipping those OpenSSLAsymmetricKey
instances, using __sleep(), the Serializabla interface or __serialize(),
but that seems unnecessary because, as explained above, the uses are
really limited and easily replaceable.
That's what this patch does.
This is basically the manual background that was removed in the
previous commit, with 4 attempts here. Note it includes the 2
waits that are REQUIRED to make it pass in too-quick environments.
If they are removed, they begin to fail because it seems that
the attempts need a minimum of separation between them.
This moves away from manual attempts and uses the activity
attempts generator instead. Quicker and not exposed to the
problems with clicks, refreshes and missing attempts.
Note that there is a small change in the attempt generator
so, now, when a new attempt is created, if the activity has
tracking enabled, the final result / grades are recalculated.
That's the real behaviour when the activity settings are
changes in the edition form and it's natural to get them
recalculated without having to visit the form. Specifically,
this allows the 1st scenario to pass, because in that scenario
no changes to the form are being performed.
Also, little detail, amend a dupe scenario name.
This automatically comes with Goutte client 4.x that is
the one we want to, also, update.
It should work 100% the same and comes with some php81
warnings cleaned.
To avoid getting some random errors with Oracle, the order for the
students have been removed from the tests (to check they are there,
regardless the order they are returned, because in that case, the
order is not important).
This commit adds a new Grunt task which generates a jsconfig.json file.
This file is described at
https://code.visualstudio.com/docs/languages/jsconfig and can be used
to configure vscode and other similar editors to understand our module
loading.
This task is an optional task for Grunt and can be run with:
npx grunt jsconfig
The file is git-ignored and will not affect normal usage.
Previously, if a course module had already been graded, course module
completion linked to the course module would not update. This
commit adds the option to enable overriding the grade at the course
module competency level.
This ensures that if enabled and a user completes a module associated
with a competency, that competency will be graded appropriately.
Some editors do not immediately store their content to the textarea they
represent and only do so when the form is submitted or they are
requested to.
This change adds to the existing API to allow an (optional)
`store_current_value` function to be defined for the editor type so that
it can use the JavaScript API to persist any current content to the
editor.
This commit adds a standardise_html function and updates the matches
function to compare normalised content.
This allows for a wider variety of valid editor output to be handled
using the standard value matching steps in Behat, thus supporting
editors other than Atto better.
There is inconsistent status check for course completion block and
completion details page. Completion block was taking to account
pending statuses for completion criteria while completion details
page was ignoring those.
SQL was fetching activities where completion state was 'completed,
but not passed reqyured grade'. For course completion such states
must be ignored.
Also fixed progress bar on my courses page. Same reasoning as above.
The lib/lti1p3 library now passes $options['form_params'] instead of
$options['body'] when making access token requests. To maintain the
'application/x-www-form-urlencoded' content-type required by OAuth 2.0
(https://www.rfc-editor.org/rfc/rfc6749#section-4.1.3), the client has
been changed to convert these array params into a body query string,
which matches the behaviour prior to the library upgrade and makes
the tool can continue to call tool platform services. Support for
$options['body'] remains, as this is still used during service calls.
This fixes a regression caused by MDL-74752. If you regraded
a subsequent quiz attempt in a quiz using the 'Each attempt
builds on last' option, then the student's response could get lost.
Prior to this commit, the behat_form_editor integration was hard-coded
to use Atto.
This change allows other editors to be used to set editor values, and
breaks that hard bond. Following this change, any editor is able to
define a behat_editor_[name].php file defining a function which meets
the following signature:
set_editor_value(string $editorid, string $value): void
Each editor is responsible for checking whether its own API is available
and calling any relevant functions to force the editor to set the
content.
Please note: Behat is unable to determine the current editor in use on
the page automatically.
This change puts back the behaviour that get_fast_modinfo will accept
a cached version of modinfo that is newer than expected (according to
the course cacherev).
Not accepting newer versions can lead to poor performance in cases
where multiple requests take place at once, or using a clustered
database.
Following MDL-45184 this now finally deprecates and removes the class
\admin_setting_managelicenses. Please use \tool_licensemanager\manager
instead.
Following MDL-45184 this now finally deprecates and removes the
function license_manager::add(). Please use license_manager::save()
instead.
Signed-off-by: Daniel Ziegenberg <daniel@ziegenberg.at>
* Add a $deprecatedcapabilities variable to deal with deprecated
capabilities
Change-Id: I14f44d331e8a1c4bd9abe9566c78d911c0205583
Co-authored-by: Mark Johnson <mark.johnson@catalyst-eu.net>
* Adds time logging (number of seconds for each success) on install,
which was previously only shown in upgrades. Useful when installing
a new plugin as part of an upgrade, or if anyone wants to optimise
Moodle installation.
* In developer debug mode, upgrade savepoint time was already logged
but now it also logs time for lots of 'details' of the process in
case time is taken in other Moodle function calls.
There are many places (install/upgrade for core, modules, blocks,
and plugins) where we need to call the same, or very similar,
sequence of Moodle functions to ensure the item is updated properly.
This change moves that sequence into a function so that it can be
held consistently in one place.
When an HTML content area contains invalid HTML, some editors will clean
and validate the content upon submission.
In this case the content was:
<b>Test content</b>
But this should be wrapped in some form of container which accepts
phrasing content (such as a <p> tag).
Some editors, such as TinyMCE, will normalise the content and add the
wrapping paragraph tags to it.
Furthermore, the bold tag is purely stylistic and does not have semantic
meaning. As a result, the <strong> tag is favoured and some editors,
again such as TinyMCE, will replace bold tags with strong tags.
We should update the content here to be valid HTML (wrap the bold tag
in a para), and use a strong tag rather than bold. This allows this test
to pass both with Atto, and other stricter editors such as TinyMCE 6.
These steps are currently using Atto-specific UI features and must
therefore make use of the @editor_atto tag to ensure that they continue
to run using Atto.
A new issue will be raised to migrate each of these to be
editor-agnostic.
When the template editor is configured to use the HTML Editor, it should
indicate this to Behat by setting the `data-fieldtype` to "editor".
This indicates to the behat field manager that the editor is in use,
which ensures that the correct value setting can take place.
This is important in the context of MDL-75887.
When an editor is used in a form as part of a group, it is missing its
label element.
This happens because there is no inline template for the editor, and
therefore it reverts to using the old `toHtml` function. The legacy
function does not cater to the editor being in a group, and therefore
does not add the hidden label.
In addition, the hiddenLabel attribute was missing from the editor
element. This is a semi-standard element but must be added to each
supporting element.
Both the missing inline template for the editor, and the hidden label
attribute must be present:
- If the hidden label attribute is not present, then the standard inline
template will add a visible label within the group.
- If the inline editor template is missing, then the label is not shown
at all.
* Remove the setting "lock on join" and related settings
* Hard-code the lockSettingsLockOnJoin=true parameter on create when any of the lock settings is used.
In MDL-75146, the get_fields_record() method was added without any
ordering criteria.
In MDL-75276, this method is reused to get the fields. We need to
re-add the order to guarantee the field are always returned in the
same order (and avoid some Oracle ordering failures).
This change, which should be easy to mimic for other editors.
This will ensure that the correct editor is used for tests relating to
that editor, or its subplugins.
The mod_data is forcing teachers to understand how to write templates
even if they want to use basic forms. With this patch the default
templates will be auto updated unless the user manually define the
templates.
Provide a test page in authentication settings
to allow administrators to test configured oAuth2
providers and to examine the data that is passed
back on a successful test user authentication.
Co-authored-by: Matt Porritt <mattp@catalyst-au.net>
If you have one course format that extends another one, any course
format output classes that are not defined in the child format will
now inherit from the parent (instead of from the base class as
before).
The current implementation conditions the highlight and hidden form
student badges to the present of the badges in the HTML. This way if a
format does not include those badges the code will continue working.
The formatting of exported dataformat content is now always dependent
on whether the format supports HTML or not, so we no longer need our
custom export class for providing the same.
Apart from updating the default templates, to make them look better,
they have been also moved to mustache files, in order to make it easier
to edit them.
The OR conditions in the WHERE clause prevented the query from
effectively filtering the messages related to the user quickly, this
change helps gets around this by allowing the database to limit
the rows in the messages table it needs to scan significantly.
The following change adds support to show only active course users
in the forum grader and generally replicates the behaviour from the
assignment grader which relies on certain config settings, user
permissions and capabilities.
Standardises return patterns of null values across database types
to keep with sorting nullsto the top when ascending, and
to the bottom when descending
Modifies the 'core_course_get_enrolled_users_by_cmid' webservice and
the generic js methods that call this webservice and enables defining
whether the ws should only return the active users or all enrolled
users in the course.
When using the date filter with the "Current" operator, the "Value"
field should not be present (because it has no meaning). This fixes
a small regression from 131a9740.
This implementation will de-couple the participant filter from
core user to core so its easily usable to any api in core or any
community plugin. This removes the dependency from the core_user
and creates a nice api where it can produce filterable objects.
Co-Authored-By: Safat Shahin <safatshahin@catalyst-au.net>
Co-Authored-By: Tomo Tsuyuki <tomotsuyuki@catalyst-au.net>
AMOS BEGIN
MOV [addcondition,core_user], [addcondition,core]
MOV [adverbfor_and,core_user], [operator_and,core]
MOV [adverbfor_andnot,core_user], [operator_andnot,core]
MOV [adverbfor_or,core_user], [operator_or,core]
MOV [applyfilters,core_user], [applyfilters,core]
MOV [clearfilterrow,core_user], [clearfilterrow,core]
MOV [clearfilters,core_user], [clearfilters,core]
MOV [filtersetmatchdescription,core_user], [filtersetmatchdescription,core]
MOV [filterrowlegend,core_user], [filterrowlegend,core]
MOV [filtertype,core_user], [filtertype,core]
MOV [match,core_user], [match,core]
MOV [matchofthefollowing,core_user], [matchofthefollowing,core]
MOV [placeholdertypeorselect,core_user], [placeholdertypeorselect,core]
MOV [selectfiltertype,core_user], [selectfiltertype,core]
AMOS END
This issue just goes over all the currently incorrect
namespaces in test cases and:
1. Change the namespace to the correct one.
2. Move/rename it to correct location if needed (level 2 and down).
3. Remove not needed MOODLE_INTERNAL check when possible.
4. Remove file phpdoc when the file only has one class.
5. Make small adjustments in case the change of namespace requires it.
There is an upgrade to clean the moodlenetprofile field which
performs very poorly, but it is also not needed because an upgrade
further down sets this field to empty string anyway.
Show performance information about locks (time taken to acquire lock,
time lock is held for) in the 'perfinfo' display.
Also show existing information (that was already calculated but not
shown before) about the session lock, which is not a 'core\lock' type
lock, but the information is similarly useful.
Have tried to also bump Travis to 22.04 (jammy) but it
was not working ok, with problems trying to find both
PHP and PostgreSQL versions.
Surely that's because 22.04 support is really new (Sep 9, 2022):
https://blog.travis-ci.com/22-9-9-ubuntujammy
So we'll have to wait a little more before being able to, also,
bump Travis to use 22.04
We were using our fork of the mink extension:
https://github.com/moodlehq/MinkExtension.git
Because they bumped requirements to PHP 7.4 too early for us. Now,
with Moodle 4.1, finally our requirements are also PHP 7.4, so we
can stop using the fork and switch to the upstream one:
https://github.com/FriendsOfBehat/MinkExtension
Note this only can be done in 4.1dev, because this is the first
version using PHP >= 7.4. Older branches will need to continue
using the fork. Also, note that we may need to go back to the
fork if there is any future trouble with the upstream library
not matching our supported PHP versions.
Apart from that, it's a good moment to bump other components to
current ones.
Of course, this has been generated following the instructions:
https://docs.moodle.org/dev/Composer
And using PHP 7.4 (always the min version supported) to generate
the lock file.
Note the failures are unrelated to this issue, but we needed
an ongoing issue to add the tag and this was picked.
The problem, only reproducible @ CI servers will be fixed here:
https://tracker.moodle.org/browse/MDL-75820
In circumstances where all collapsible form sections were expanded on
page load, a check is now made to ensure the expand all/collapse all
button behaves as intended.
Deprecates the select_in_gradebook_navigation_selector() function in
behat_grade.php and removes all usages. The select menu field supports
the same functionality and this function can be simply replaced with
behat_forms::i_set_the_field_to().
Adds new template dedicated for the general tertiary navigation element
which utilizes the exising select_menu output component. Also, adds
custom styling to the tertiary navigation selector element.
Adds behat support for group structures in the select menu field. When
looking for a particular option you can further specify the group under
which this option should be located by using the '>' delimiter
(e.g. "Group name > Option name"). In addition to that, this commit
intorduces new step definition which can be used to check whether the
select menu field contains a particular option.
The following commit fixes the current logic that is used to return the
selected option and take into account structures with group options.
Also, it adds a default value to the $labelattributes class property to
to fix the issues that occur then the label is not explicitely set by
set_label().
Applied the following changes to various testcase classes:
- Namespaced with component[\level2-API]
- Moved to level2-API subdirectory when required.
- Fixed incorrect use statements with leading backslash.
- Remove file phpdoc block
- Remove MOODLE_INTERNAL if not needed.
- Changed code to point to global scope when needed.
- Fix some relative paths and comments here and there.
- All them passing individually.
- Complete runs passing too.
Recently, PHPUnit (all versions) did some changes about how the
comparators worked and this has caused some float comparisons
to stop working.
We need to move them to assertEqualsWithDelta(), allowing a small
tolerance to workaround the floats comparison problem.
0.00001 has been decided. And applied to all the similar assertions
within the unittest function, so if more cases are added to them
better be copied with the agreed tolerance.
This issue greatly improves the performance of displaying statistics in
the question bank.
1. The required quiz statistics are now pre-computed by a scheduled task.
2. Cached statistics in the database are now never cleaned up, so the
pre-computed stats are always available.
3. The way the cached statistics are loaded for each question
that is being displayed is now a bit more efficient.
4. Related to that, there is a new callback which activities can implement,
if they want their question statistics to be included in the ones shown
in the question bank.
Note, there is still further improvement possible to load the statistics
for all questions being displayed in bulk. However, that must wait for a
future issue, MDL-75576. The other improvements in this issue are
significant and we did not want to delay releasing them.
Co-authored-by: Jonathan Champ <jrchamp@ncsu.edu>
Co-authored-by: Tim Hunt <t.j.hunt@open.ac.uk>
The cache file is only ever written to in the `write_file` function,
where it does so by writing to a temp file and performing an atomic
rename of that file. When writing, the target file is never locked.
The cache file is only ever read in the `get` function, and there is no
need for an exclusive lock in that situation.
There is therefore no need to obtain any lock, shared or exclusive, to
read the cache file. Doing so only affects performance of the file sytem
as file locks must be needlessly obtained and written to disk for a read
operation which does not benefit from them.
- Guest user attempting to access to single-activity course.
- Not enrolled user attempt to access to single-activity course.
Both should, by default, land to the "cannot access/enrol" page.
The Redis cache store and session handler both do a 'ping()' after
connecting to Redis. This is unnecessary because the connect() call
has just checked the network connection and it's hardly likely that
the server has gone down since then.
According to my profiling, both connect() and ping() take
measurable time when talking to a separate server, i.e. a few
milliseconds. So it's not the case that connect() doesn't really
talk to the server, as I initially wondered.
If using Redis on a separate (non-localhost) server for both session
and cache store, removing these ping calls can save a millisecond
or two per request.
Applied the following changes to various testcase classes:
- Namespaced with component[\level2-API]
- Moved to level2-API subdirectory when required.
- Fixed incorrect use statements with leading backslash.
- Remove file phpdoc block
- Remove MOODLE_INTERNAL if not needed.
- Changed code to point to global scope when needed.
- Fix some relative paths and comments here and there.
- All them passing individually.
- Complete runs passing too.
Special mention to:
- In lib/tests/blocklib_test.php 2 helper classes have been
moved to tests/fixtures, because they needed to be namespace-free.
We should respect the value of the PHPUNIT_LONGTEST constant in the
report source stress tests, as it was discovered after 165e26fa that
the default configuration of some CIs (GHA) was not sufficient to run
them.
Hence, use the PHPUNIT_LONGTEST to determine whether to execute said
tests. Note this constant is enabled on internal CI.
* When loading a course with the Recent Activity block the bigbluebuttonbn_print_recent_activity
takes too much time to load the logs. Using the courseid (index of log table) improves the
time taken by the query.
* Opening braces should be on the same line
* Unwanted MOODLE_INTERNAL
* Behat edit_instance.feature should use "activity editing" page locator
* Coverage indication
Calling \core_user\fields::get_sql() incerements a static uniqueid
variable. This should be called only once and not make a separate call
for the sort mapping data as it doing so will result to an incorrect
table alias for the sort mapping data.
The parameters $exportactiveurl and $importactiveurl are removed from
export_action_bar and import_action_bar classes. Not only passing them
were redundant and it was possible to generate them by having
$activeplugin (also passed to the mentioned class constructors), but
also we had a bug there. The value of $PAGE->url was passed as those
parameters, but $PAGE->url can sometimes include additional parameters
and as a result, its value may not match any of the available
export/import plugins.
This commit introduces a new partial selector for select_menu fields,
and teaching the field manager how to recognise these, then introducing
a new field type which can handle setting values for this field.
Implement stress tester methods for iterating over report columns,
aggregation and conditions. Assert that each works correctly in
isolation, and when used in conjunction with other columns.
With IANA TZDB (timezone database) release 2022b, Europe/Kiev
has been renamed to Europe/Kyiv. So we need to add this string
to our list to keep tests passing.
Note that the old Europe/Kiev continues working (is an alias) and,
also, there are places in core where we are using it. Just we cannot
remove/replace those uses in core until we ensure that everybody is
using PHP 8.0.23 (TZDB 2022b) or more recent versions. Hence,
not changing those uses now.
Oracle 21 performs worse than previous versions and this
is causing some tool_httpsreplace jobs to, near consistently,
fail with timeouts.
This can be workaround in a number of ways:
1) Hacking tool_httpsreplace to detect when it's running a
behat test and avoid running it completely. We did something
like that for tool_customlang in the past. Ugly exception.
2) For Oracle jobs, set BEHAT_INCREASE_TIMEOUT to 2 or higher, that
will allow the whole behat run to have more time. Maybe too much
if only the tool_httpsreplace scenarios are affected. And requires
special configuration in sites running the tests.
3) Improve Oracle 21 performance. There are some remaining tests to
perform to achieve that, but it's extremely slow process, so it
won't happen soon.
4) Give more time to the failing tests using the step: "I mark this
test as slow setting a timeout factor of X". It applies to all
databases, but we are already using it, so no big problem. It's the
same than solution 2) but from within the tests instead of affecting
to the whole run.
From all the alternatives above, this patch implements 4), doubling
(from current 2 to 4), to give each test up to two minutes
(30 secs * 4 = 120 secs) with the new allowed timeout-factor.
The uniqueidentifier argument is only needed by the version selector and
can be set within the output fragment function using it. There's no need
for it to be a parameter when calling the output fragment function.
* Sometimes recordings are not migrated when upgrating from pre-4.0 release
version. The additional script will allow to launch the migration once again
either for specific courses or activities.
Mustache version 2.14.1 is already included, but the VERSION const
incorrectly listed 2.14.0 in the tagged Mustache release. A later
upstream commit corrected this in the library, which this now matches.
* Replaces checking header for SEB config keys to assess quiz access.
* Adds new web service accessible via Ajax
* Forces the use of the new API where available
* Stores access in Moodle SESSION for quiz instead of checking every
page.
The enabled state of a plugin is a tri-state value (boolean or
null). We should be consistent with elsewhere by only considering
boolean false as an actually disabled plugin.
See also cdcb53a1 for similar change in task management.
Applied the following changes to various testcase classes:
- Namespaced with component[\level2-API]
- Moved to level2-API subdirectory when required.
- Fixed incorrect use statements with leading backslash.
- Remove file phpdoc block
- Remove MOODLE_INTERNAL if not needed.
- Changed code to point to global scope when needed.
- Fix some relative paths and comments here and there.
- All them passing individually.
- Complete runs passing too.
Special mention to:
- The following task tests have been moved within the level2 directory:
- \core\adhoc_task_test => \core\task\adhoc_task_test
- \core\scheduled_task_test => \core\task\scheduled_task_test
- \core\calendar_cron_task_test => \core\task\calendar_cron_task_test
- \core\h5p_get_content_types_task_test => \core\task\h5p_get_content_types_task_test
- \core\task_database_logger_test => \core\task\database_logger_test
- \core\task_logging_test => \core\task\logging_test
- The following event tests have been moved within level2 directory:
- \core\event_context_locked_test => \core\event\context_locked_test
- \core\event_deprecated_test => \core\event\deprecated_test
- \core\event_grade_deleted_test => \core\event\grade_deleted_test
- \core\event_profile_field_test => \core\event\profile_field_test
- \core\event_unknown_logged_test => \core\event\unknown_logged_test
- \core\event_user_graded_test => \core\event\user_graded_test
- \core\event_user_password_updated_test => \core\event\user_password_updated_test
- The following output tests have been moved within level2 directory:
- \core\mustache_template_finder_test => \core\output\mustache_template_finder_test
- \core\mustache_template_source_loader_test => \core\output\mustache_template_source_loader_test
- \core\output_mustache_helper_collection_test => \core\output\mustache_helper_collection_test
- The following tests have been moved to their correct tests directories:
- lib/tests/time_splittings_test.php => analytics/tests/time_splittings_test.php
- All the classes and tests under lib/filebrowser and lib/filestorage
belong to core, not to core_files. Some day we should move
them to their correct subsystem.
- All the classes and tests under lib/grade belong to core, not
to core_grades. Some day we should move them to their correct
subsystem.
- The core_grades_external class and its \core\grades_external_test
unit test should belong to the grades subsystem or, alternatively,
to \core\external, they both should be moved together.
- The core_grading_external class and its \core\grading_external_test
unit test should belong to the grading subsystem or, alternatively,
to \core\external, they both should be moved together.
- The \core\message\message and \core\message\inbound (may be others)
classes, and their associated tests should go to the core_message
subsystem.
- The core_user class, and its associated tests should go to the
core_user subsystem.
- The \core\update namespace is plain wrong (update is not valid API)
and needs action 1) create it or 2) move elsewhere.
This commit fixes few things:
- Fix correct language string order.
- Change the code in myprofile.php to be consistent with other checks.
- Update provided test to fix behat failure.
The 'user' parameter has been added to the 'mod_data > presets'
generator, to let define the author of the preset.
When it's not defined, admin is used as the author.
This commit changes changes the unit test calculations to
keep track of the time the bucket starts/finishes bursting
and use milliseconds instead of seconds to have a precise
time to sleep.
From now on, the data_generate_default_template method will always return
a string with the template content or an empty string when there is no
content available (for instance, when the database has no fields).
This method won't return a boolean anymore.
The 'user' parameter has been added to the 'mod_data > entries'
generator, to let define the author of the entry.
When it's not defined, admin is used as the author.
Update existing entity to define remaining report elements. Add new
report source joining the entity to the user entity to provide data
for the reportbuilder editor.
This issue has started causing some errors with behat. It seems the
"Save changes" button is not clickable, so changing the window size
will do the magic.
* As a student I should only be able to access the next question or the current question
* The API should not show more than the current question
* Once the quiz is previewed we can see the question in any order (existing behaviour)
* Related to ticket MDL-71728
Co-authored-by: Rajneel Totaram <rjnlfj@yahoo.com>
Co-authored-by: Tim Hunt <t.j.hunt@open.ac.uk>
For a long time, Moodle has had the feature to force the language
for a whole course. This change adds the same feature at activity
level.
The course-level feature was controlled by a capability
moodle/course:setforcedlanguage, and I decided to use the same
capability to control this feature. I think a new capability would be
overkill.
This is a regression from MDL-75146, when the manager class was created.
The field class was not found in the Single view, because the field.class.php
file was not included (so the base class was used in all the cases for this
view). That's why the image field was displaying only the image name instead
of building the <img element or the URLs were displaying only the text, instead
of creating a link for them.
Replace steps that manually add H5Pactivity instances via the UI
and use Behat generators. This improves the speed of the Behat test
runs.
Co-authored-by: Simey Lameze <simey@moodle.com>
* When Show imported links only is enabled in activity or config, only imported recordings will appear
* Logic for activity/default overrides implemented
This commit adds support to description field for presets:
- For plugin presets, description will be stored in the module_help
string in lang files.
- For saved presets, a new element, <description>, has been added
to the preset.xml file, to include this information.
A new field has been added to the "Save as preset" modal, to let users
define description (which is empty by default, to support pre-existing
presets that won't have it).
Apart from that, the "Save as preset" workflow has been slightly improved,
following the Product UX/UX suggestions to hide the checkbox to overwrite
the preset by default and show it only if the user tries to save a preset
with an existing name.
The custom report exporter should define its own editable element
properties (conditions, filters, etc) as optional, rather than each
of those element exporters defining their properties as optional.
Replace steps that manually add BigBlueButton instances via the UI
and use Behat generators. This improves the speed of the Behat test
runs.
Co-authored-by: Simey Lameze <simey@moodle.com>
Editor stylesheets are kept separately to standard plugin stylesheets so
that they can be provided to style individual iframes where loading the
standard Moodle stylesheets would be incorrect.
Unfortunately the editor stylesheet system does not consider that
subplugins may want to add small individual styling to the editor but
this is required in some situations.
When resetting report filters, we need to include the original report
parameters in the external method call to ensure all those that are
required during validation are present (e.g. when determining if user
can view the current system report).
- Add a new help text.
- Add captions to table columns.
- Move action icons to action menu, and fix code to display the remove
action only for presets created by users.
- CSS improvements to fit the prototype.
In order to achive the previous points, the renderer has been improved,
to return the data and let the mustache to print it properly (instead of
returning the formatted HTML table).
This activity currently supports two different preset types:
- Datapreset plugins, that can be installed copying them to the
mod/data/preset folder.
- Presets saved manually by users.
This commit adds an attribute to the presets to mark them, in order
to identify them later (because, for instance, the plugins can't be
removed).
Apart from that, the methods in lib.php, involved with this issue, have
been deprecated. New methods have been implemented in the manager class,
covering them with PHPUnit tests.
While covering is_directory_a_preset() with PHPUnit tests, it has been
identified that there was a missing file in the Image gallery preset.
The template will be reviewed in the future (in a separate issue) but,
for now, I'm going to add the default template for advanced search.
The window.tinyMCE.editors API was present in version 3 of TinyMCE, but
is not present in later versions. As a result, this check tries to loop
over a variable which does not exist and throws an error in the process.
We should check that window.tinyMCE *and* window.tinyMCE.editors both
exist before attempting to loop over them.
Fixes the site home secondary nav, so that nodes added by plugins
implementing the PLUGIN_extend_navigation_frontpage callback can be
displayed for users who don't have the 'course:update' capability.
This change comprises:
- Removed course:update capability checks from site home (index.php)
and from the secondary nav view. This isn't needed since the nav is
capability aware.
- Fixed the initialisation of the secondary nav for the frontpage
course, removing erroneous duplicate 'home' nodes. The nav is now only
shown if there are nodes to display.
Allow adhoc tasks to implement this method, so they too can have
descriptive names for themselves. Default implementation added to
return the class name itself.
AMOS BEGIN
CPY [privacy:preference:showstandardinstruction,qtype_multichoice],[privacy:preference:showstandardinstruction,qtype_truefalse]
CPY [showstandardinstruction,qtype_multichoice],[showstandardinstruction,qtype_truefalse]
AMOS END
The changes introduced here are completely safe, just we stop
binding SITEID and, instead, embed it in the SQL.
Why? Because Oracle 21 has started to return non-sense results
when SITEID is bound.
After lots of tests, attempts, debugging... we have been unable
to find any logic to the need of this change and also, have been
unable to reproduce the problem with a standalone script that
pretty much runs the same queries that the ones changed here.
I'm sure that there is something, somewhere, but have failed
to find it, grrr.
Please read MDL-75208 and linked issues to find more information
about this problem, that is one of the biggest mysteries I've
seen recently. Maybe at the end there is a tiny detail that
explains it all, but it's really well hidden.
When concatenating column fields in order to perform aggregation on
them (e.g. group concatenation), we need to preserve all null values
in the data passed to each column callback.
Co-authored-by: Carlos Castillo <carlos.castillo@moodle.com>
Removal of the callback get_shortcuts() and its plugin implementations.
The private methods in the content_item_readonly_repository class
which were only used by the callback hook logic are also removed.
Previously the `moodle/course:bulkmessaging` capability controlled
access to the entire bulk actions menu for course participants,
rather than just those actions related to messaging.
Verify the expected behaviour of the sync_members and sync_grades tasks
when enrolment instances are disabled, whether as a byproduct of module
deletion, or as status change made by the user.
Adds a warning to the 'name' column of the tables, letting teachers know
that the activity exposed by the method has been deleted and what their
options are.
When instantiating classes that extend `inplace_editable` we can
improve performance by passing persistent instances we already have,
rather than re-requesting them.
Add test coverage to relevant classes.
This is a partial backport of MDL-73270 to ensure that the
check_xmlrpc_usage custom check is present in all the supported
branches and it's applied to all branches able to run php80:
- MOODLE_311_STABLE
- MOODLE_400_STABLE
- master (aka, 4.1 and up)
Note that the whole patch has not been backported, only the
environmental check (xml file and check implementation).
Basically, we only need to change:
- PHP 7.4
- PostgreSQL 12
Also, moving up to focal as dev environment, removing NVM_VERSION
because nvm automatically detects .nvmrc and switching to
socketed connection for PostgreSQL (little improvements).
Apply core_form/submit JavaScript code to prevent double submission of login form and guest login button.
Add ID to guest login button to make it addressable.
Moved written table timestamping from query_start() to query_end():
We are adjusting table last written times at the end of transaction.
That does not apply to immediate database writes that are not performed
within transaction. This change is to set last written time after the query
has finished for such writes, rather than before it started. That way
long write operations cannot spill over the latency parameter.
This code was used only by deleted upgrade steps so it's safe
to proceed with straight deletion, considering it internal.
Deletion has been documented in corresponding upgrade.txt files:
- \mod_forum\task\refresh_forum_post_counts adhoc task
And these is the list of code that has NOT been removed
because it may be needed in the future:
- \core_search\manager::clean_up_non_existing_area(), used by
- adhoc task: \core\task\clean_up_deleted_search_area_task adhoc task
This code was used only by deleted upgrade steps so it's safe
to proceed with straight deletion, considering it internal.
Deletion has been documented in corresponding upgrade.txt files:
- upgrade_analytics_fix_contextids_defaults()
- upgrade_convert_hub_config_site_param_names()
- upgrade_rename_prediction_actions_useful_incorrectly_flagged()
This just deletes all the upgrade steps previous to 3.9.0. Some
small adjustments, like tweaking globals can also be applied
when needed.
Also includes an upgrade step to prevent upgrading from any
version < 2020061500 (v3.9.0) as anti-cheating measure.
The next commits will proceed to deprecate / remove functions
that were exclusively (usually belonging to upgradelib) being
used by those, now removed, upgrade steps. This is the list
of code to remove and document in upgrade.txt files:
- upgrade_analytics_fix_contextids_defaults()
- upgrade_convert_hub_config_site_param_names()
- upgrade_rename_prediction_actions_useful_incorrectly_flagged()
- \mod_forum\task\refresh_forum_post_counts adhoc task.
And these is the code that has NOT been removed
because it may be needed later (no matter there aren't uses now):
- \core_search\manager::clean_up_non_existing_area(), used by
- \core\task\clean_up_deleted_search_area_task adhoc task
Now that the required PHP version has been raised to php74, set
it in the composer.json file and regenerate everything, following
the instructions @ https://docs.moodle.org/dev/Composer, also
with php74.
That's the only change (raised php version) as far as no change
has been performed to extension.
This re-applies the same fix that was used for the central mod form
to the workshop activity. This is needed because the completion
support for this module is custom (there are 2 grade items), hence
the validations are also custom.
For more information, read the previous commit and MDL-74516
Unfortunately, because of a related bug with assessment completion
(see MDL-69690) we cannot provide automated testing for this
activity. Manual instructions will be provided instead.
Current code was relying on grade_floatval() that is not a validation
function. Instead, the gradepass field must be defined as proper float
and then perform the needed validations using unformat_float().
Note that the float element form has some particularities, see
MDL-73994 for more information and that makes us to have to check
for some values (null, zero) manually. Once that form element type
gets its behaviour fixed, the code will need to be revisited, hence
we have annotated it as comments for easier finding it in the future
(the same changes already were applied to other gradebook forms).
Also, remove an unreachable line of code (comparing with empty string)
within the grade_floatval() function because it's not possible anymore
to pass any string to it, as far as it's "?float" typed.
Covered as many cases with quiz completion as have been able to imagine.
Due to fixed positioning of the block drawer and the navbar, the
z-index css property on the skip link elements from the drawer
is not respected. This ultimately results in the skip links being
stacked behind the navbar. As a workaround, an absolute positioning
will be temporary applied to the block drawer once the current
focus is on an element within the drawer which will stack the
skip links infront of the navbar.
- Apply the .alert-dismissible class for notification alerts with
close button to fix its positioning. As an added bonus, the
.alert-dismissible class also enlarges the clickable area of the
close button which is great for accessibility.
- Improve example context for the notification alerts templates.
This patch modifies the way copy data is shared in order to mitigate potential race conditions
and ensure that the serialised controller stored in the DB is always in a valid state.
The restore controller is now considered the "source of truth" for all information about the
copy operation. Backup controllers can no longer contain information about course copies.
As copy creation is not atomic, it is still possible for copy controllers to become orphaned or
exist in an invalid state. To mitigate this the backup cleanup task has been modified to call
a new helper method copy_helper::cleanup_orphaned_copy_controllers.
Summary of changes in this patch:
- Copy data must now be passed through the restore controller's constructor
- base_controller::get_copy has been deprecated in favour of restore_controller::get_copy
- base_controller::set_copy has been deprecated without replacement
- core_backup\copy\copy has been deprecated, use copy_helper.class.php's copy_helper instead
- backup_cleanup_task will now clean up orphaned controllers from copy operations that went awry
Thanks to Peter Burnett for assiting with testing this patch.
Re-factor existing code to make use of file manager class that renders
these details for us by default.
Co-authored-by: Simey Lameze <simey@moodle.com>
We are disabling the -v (verbose) option, used by default. Still,
now we support a secret (that can be added to everyone's repository)
to accept any PHPUnit's command line options and run the tests with
them.
Some examples:
phpunit_options = -v (to keep the verbose option enabled)
phpunit_options = --testdox (to print information about every test...)
... (basically anything supported by the CLI).
Also, we are raising here the environment from Ubuntu 18.04 to 20.04
(self tested by GHA, heh)
Switch the select element event listener to that provided by custom
events helper, for adding report filters and conditions. This improves
cross-platform support.
* Darken the score value using the green theme colour
* Use a light green theme colour for selection backgrounds
* Unify rubric styles related to background and text colour within the
criteria.
The previous code was resetting timestamps for only the file itself,
which could lead to it having an earlier time than the root entry of
it's filearea.
This caused sporadic test failures when the current time ticked over
by a second during execution.
* When adding the block_site_main_menu on every page, the activity chooser generated
for this entire page is set with courseid = 1. So any activity is then added to the
home page instead of a course.
Both entities define columns and filters for related tags (referred
to as "interests" for users).
Create new generic tags filter type to facilitate this, which can be
re-used by any entities for components which support tagging.
It has been detected that the flatten_dependencies_array() was fragile
and leading to wrong results when some incorrect data was passed to it.
This includes:
- Missing elements.
- Null dependencies.
- Non array dependencies.
While the existing behaviour (testing-wise) has been preserved, now the
situations above are better controlled and the function ignores all
those incorrect cases that shouldn't happen ever.
That implies that a good number of notices/warnings/errors aren't
happening anymore. That was impacting both results (when the problems
were only notices and warnings) and execution (when the problems
were errors).
Covered with tests.
* Completion view should work out of the box
* Patch the _user_outline and _user_complete so it works with completion view, while
implementing something better in MDL-74468
Reverting the addition of a Boostrap tooltip on the alert notification's
close button. It introduced a bug where the tooltip remains after
dismissing the notification alert. We can manually toggle the state of
the tooltip via JS, but I don't think it's worth the effort. The tooltip
is meant as an added bonus for sighted users to see what the close
button is about.
Use #region-main-box and not .mform in the selector, otherwise it may
return the wrong mform, such as global search, if enabled. This is the
same way the form is selected in showMultipleSummaryAndHideForm().
Adjusted the condition while reading the streams
in chunks. Read till the end to make sure we have got all
the data. Else we might not get all the data to show
in file picker.
Secondary nav previously had to be in my_plugin\local\views\secondary; this
location continues to work but is deprecated. The new location is
my_plugin\navigation\views\secondary.
Following MDL-63580 this now finally deprecates and removes the class
\tool_task\run_from_cli, please use \core\task\manager.
Following MDL-63580 this now finally deprecates and removes
- admin/tool/task/cli/schedule_task.php, use admin/cli/scheduled_task.php
- admin/tool/task/cli/adhoc_task.php, use admin/cli/adhoc_task.php
Also mentions and references to the old CLI scripts are updated to
point to the new counterparts.
Signed-off-by: Daniel Ziegenberg <daniel@ziegenberg.at>
Ensure the saved values for the hidden and hidden until fields are
populated when editing a grade category. Fix behaviour on enabling
the hidden until field.
Re-enable tests commented out in eba1d32c.
As well as storing 1/0 to indicate hidden state, they are also used
to store a timestamp indicating hidden until date. Increasing field
size allows these values to be stored without triggering exceptions.
This patch fixes the behat failures with classic for the scenario
"Upload users enrolling them on courses and assign category roles".
There is a "Participants" link hidden in the "Site pages" which is
causing these failures.
Apart from this, there was another issue because it was not possible
to navigation with classic (I've added one extra step to visit homepage).
This adds a condition to check if Online text is used
for the submission. The functions file_postupdate_standard_editor
and file_postupdate_standard_filemanager needs the property
content_editor of the formdata.
The implements the new regrade-related hooks, and also has
tests for the changes to the core system, now that we have a question
type we can use for them.
This commit implements the necessary core hooks to ensure we only
allow a regrade of a quetion attempt to take place if the new and old
versions of the question are sufficiently similar.
It will be followed by commits to each question type where the
new method needs to be implemented.
Automated tests will be included in the first of those (mulitple choice)
becuse we need a question type that implements the hooks to test
the core changes.
During the late stages of developing MDL-20636, some key concepts
in the code got renamed. However, at the time, this class was not
updated properly so updating it now.
- Formatted the query to meet SQL coding styles
- Add index on {files} to prevent performance regression
- Fork the SQL query based on DB family based on support
- Updates to log stores and backup helper to improve performance when
checking if a course has been modified.
- This is a breaking change as it adds a new function on the sql_reader
interface.
Co-authored-by: Kevin Pham <keevan.pham@gmail.com>
This patch changes the way adhoc tasks are chosen to run. It now calculates
how many runners each type of adhoc task should be allowed to use. In the
case that not all the runners are utilised, it attempts to infer which
tasks do not take a long time to run, and gives those to the vacant runners.
Thanks to Brendan Heywood for guidance and SQL help.
The 'unable to obtain session lock'-exception raised by the Redis
session handler is hardcoded in English and not all that useful
to the end user.
This change adds the error message to the lang/error.php and gives
the user further hints why the error might have occured and how it
could be fixed.
Signed-off-by: Daniel Ziegenberg <daniel@ziegenberg.at>
* Make the ordering of the message and the close button logical on
the DOM.
* Hide the times HTML entity
* Add sr-only label on the close button for non-sighted users
* Add tooltip on the close button sighted users
* With all the notification templates being the same except for the
class, I created a base notification template (core/notification_base)
that alert notifications just override. This avoids code duplication
and can make maintenance simpler.
In MDL-73915 the nodejs version was switched to lts/gallium but the
travis integration was not updated.
Signed-off-by: Daniel Ziegenberg <daniel@ziegenberg.at>
* No need to enclose the title of the quiz navigation fake block in
a span tag. The block title also gets appended to the skip link which
means that a block title with a span tag assigned with an identifier
can cause duplicate ID errors on the DOM.
Display more friendly messages when:
* When displaying activity and the server is not available
* When we join a meeting and the server is not available or an error is detected
When the user is logged in successfully then reset the value
of login_failed_count_since_success to zero, if the value of
login_failed_count_since_success is greater than zero.
Create two entities exposing reportable data on badges and their
recipients, via column and filter definitions.
Create report source bringing them together along with the user and
course entities to provide data for the reportbuilder editor.
Prior to this change, the testcase would assert ordering based on
identical fields which could lead to random failures. Set distinct
next start time of course backup, and also remove random ordering
by sorting on defined course order (all other fields being equal).
Given that custom reports can now have defined pagesize properties, we
need to preserve that value in the table filterset so that it's always
available after AJAX requests.
- Replace all individual calls to add all columns, filters and
conditions on the cohorts datasource with the new
method add_all_from_entities().
- Replace all individual calls to add all columns, filters and
conditions on the courses datasource with the new
method add_all_from_entities().
- Replace all individual calls to add all columns, filters and
conditions on the users datasource with the new
method add_all_from_entity().
Without this index, a full table scan / table level locking occurs when
logging out of Moodle. This can result in slow performance in a busy
Moodle site.
Applied the following changes to various testcase classes:
- Namespaced with component[\level2-API]
- Moved to level2-API subdirectory when required.
- Fixed incorrect use statements with leading backslash.
- Remove file phpdoc block
- Remove MOODLE_INTERNAL if not needed.
- Changed code to point to global scope when needed.
- Fix some relative paths and comments here and there.
- All them passing individually.
- Complete runs passing too.
Special mention to:
- Moved to the level2 "privacy" namespace:
- \mod_assign\privacy\feedback_legacy_polyfill_test
- \mod_assign\privacy\submission_legacy_polyfill_test
- Moved to the level2 "task" namespace:
- \core_message\task\migrate_message_data_test
- \ltiservice_gradebookservices\task\cleanup_test
- \message_email\task\send_email_test
- \mod_lti\task\clean_access_tokens_test
- \mod_workshop\task\cron_task_test
- Moved to the level2 "event" namespace:
- \core_h5p\event\deleted_test
- \core_h5p\event\viewed_test
- Renamed to a better name:
- backup_forum_activity_task_test.php (missing "task")
Applied the following changes to various testcase classes:
- Namespaced with component[\level2-API]
- Moved to level2-API subdirectory when required.
- Fixed incorrect use statements with leading backslash.
- Remove file phpdoc block
- Remove MOODLE_INTERNAL if not needed.
- Changed code to point to global scope when needed.
- Fix some relative paths and comments here and there.
- All them passing individually.
- Complete runs passing too.
Special mention to:
- Some fixtures, initially defined in the test files have been
moved to new files in fixtures subdirectory, leaving the unit
test files clearer:
- moodle2_course_format_test.php
- Rename wrong named test:
- baseoptiogroup_test = baseoptigroup_test
Adds a new install script for the BBB module and a new upgrade step.
The BBB module now will be disabled by default for new installations
and also it will be disabled for the existing sites that use the
default BBB server configuration. Admistrators will be required to
confirm the acceptance of the related DPA prior to (re)enabling the
plugin once again.
Adds a note in the BBB general settings page to raise awareness about
the legal obligations related to the data processing agreement with the
service provider which is currently configured.
Implements a function for the 'pre_enable_plugin_actions' callback.
When the default BBB server settings are used while the administrator
attempts to enable the BBB plugin, the function will prevent this
action and trigger a dynamic form requesting the admin to conifrm
their acceptance of the related data processing agreement. The process
of enabling the plugin will continue as usual in cases where the
admin has already confirmed the acceptance of the dpa or a different
BBB server configuration is used other than the default.
Adds a callback xxx_pre_enable_plugin_actions in admin/modules.php
which plugins can use to force additional actions before enabling the
plugin. The return value (bool) from the plugin callback method
specifies whether the process of enabling the plugin should continue
after the added actions or not.
This patch wraps the login_failed_count logic in a resource lock and
forces a user preferences cache reload. Each thread must wait for the
lock and must fetch the current count before incrementing it. This
ensures that login_failed_count is correct across threads and that the
lockout threshold is correctly honoured.
Co-Authored-By: Sujith Haridasan <sujith@moodle.com>
Modified course format options reading and writing to be able to handle Editor elements by enabling them to split array values into
multiple values before inserting into database, and combining multiple values into an array when reading from the database.
Modified backup and restore code to use backup_nested_elements, and to interact directly with the database.
Co-authored-by: Jason den Dulk <jasondendulk@catalyst-au.net>
Co-authored-by: Matthew Hilton <matthewhilton@catalyst-au.net>
The activity header, which includes things like dates and completion
information, was moved out of the page $OUTPUT and into a separate
template context variable in 4.0, meaning it was missing from any layout
which didn't actively add it back to the page output. This fixes this
problem for the embedded layout only by adding support for the activity
header in the embedded template.
The defined context in admin_settingpage does not always relate to the
system context. One example is the 'frontpagesettings' admin setting
page which specifies front page as it's default context. Therefore, the
page context in admin/settings.php should be consisent with the defined
context in the related admin_settingpage object to make sure that the
expected navigation menus are being displayed and properly highlighted.
Additionally, the code in admin/settings.php related to the breadcrumb
structure specific to 'frontpagesettings' has been removed as it is no
longer relevant.
The scenario has not only grades related completion conditions
but also timing conditions or reach the end conditions that
shouldn't be tested by a grades feature.
More yet, those completion conditions are already tested by
other feature files, namely:
- reach the end: completion_condition_end_reached.feature
- visit and timing: lesson_activity_completion.feature
So we have removed all those parts that are being tested
by other features.
Specially the visit and timing ones, because they lead to
random failures in slow environments and they have been
fixed in the lesson_activity_completion.feature scenarios
by MDL-72698.
* Fix issue with the roomupdater that should not force the updatecache flag
for get_meeting_info API
* Fix issue when meeting is not started (and does not exist) and bigbluebutton_proxy::get_meeting_info
throws an exception, skipping the cache and then polling the server every second.
This should be a button given it's an action, and making it a button
means it can be activated using either the space or enter keys, instead
of just enter.
By adding the step:
Given remote langimport tests are enabled
We make the execution of scenarios requiring to install /
upgrade lang packs optional, based in the existence of the constant:
TOOL_LANGIMPORT_REMOTE_TESTS
That way, when we are skipping language upgrades with the CFG var:
$CFG->skiplangupgrade = true
We can decide not not execute those tests.
With other words, putting something like this in the config.php
file we will be controlling when to execute or no the behat tests:
// Disable lang updates on upgrade.
$CFG->skiplangupgrade = true;
if (empty($CFG->skiplangupgrade)) {
// Define it only if we aren't skipping lang upgrades.
define('TOOL_LANGIMPORT_REMOTE_TESTS', true);
}
This option was used to return the source files, but we do not support
this any more because we use source maps instead and require babel
transformation to support ES2015.
It does not make sense to support this code path any longer.
- There is now a single point for the configuration to be updated or
inserted into the DB.
- De-nestifying the code does make it longer to scroll through but you
can now edit areas of interest with more confidence, and should make
it easier to grok places of interest.
- Updated DB check from get_field to get_record as it's better in the
case of an update - using the id.
- Updates will happen on the ID field, which should be the primary key
for the table.
- Cache won't be invalidated if no changes were made.
- Property does not need to be checked for behat test if you are just
inserting a new value to an array using the arr[] = value syntax as it
should just work.
- Opted to replace array_key_exists with isset which is a faster check
due to it being a language construct and the fact that it should NOT
contain null values (as a null value would be removed) should mean
this is a safe change.
- Cleanup function param defaults.
- Prefer [] arrays instead of array() declarations.
2022-01-05 10:04:41 +11:00
6482 changed files with 330239 additions and 122802 deletions
{"version":3,"file":"steps.min.js","sources":["../src/steps.js"],"sourcesContent":["// This file is part of Moodle - http://moodle.org/\n//\n// Moodle is free software: you can redistribute it and/or modify\n// it under the terms of the GNU General Public License as published by\n// the Free Software Foundation, either version 3 of the License, or\n// (at your option) any later version.\n//\n// Moodle is distributed in the hope that it will be useful,\n// but WITHOUT ANY WARRANTY; without even the implied warranty of\n// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n// GNU General Public License for more details.\n//\n// You should have received a copy of the GNU General Public License\n// along with Moodle. If not, see <http://www.gnu.org/licenses/>.\n\nimport Ajax from 'core/ajax';\nimport Templates from 'core/templates';\nimport PendingJS from 'core/pending';\n\n/**\n * Enhancements for the step definitions page.\n *\n * @module tool_behat/steps\n * @copyright 2022 Catalyst IT EU\n * @author Mark Johnson <mark.johnson@catalyst-eu.net>\n * @license http://www.gnu.org/copyleft/gpl.html GNU GPL v3 or later\n */\n\n/**\n * Call the get_entity_generator web service function\n *\n * Takes the name of an entity generator and returns an object containing a list of the required fields.\n *\n * @param {String} entityType\n * @returns {Promise}\n */\nconst getGeneratorEntities = (entityType) => Ajax.call([{\n methodname: 'tool_behat_get_entity_generator',\n args: {entitytype: entityType}\n}])[0];\n\n/**\n * Render HTML for required fields\n *\n * Takes the entity data returned from getGeneratorEntities and renders the HTML to display the required fields.\n *\n * @param {String} entityData\n * @return {Promise}\n */\nconst getRequiredFieldsContent = (entityData) => {\n if (!entityData.required?.length) {\n return Promise.resolve({\n html: '',\n js: ''\n });\n }\n return Templates.renderForPromise('tool_behat/steprequiredfields', {fields: entityData.required});\n};\n\nexport const init = () => {\n // When an entity is selected in the \"the following exist\" step, fetch and display the required fields.\n document.addEventListener('change', async(e) => {\n const entityElement = e.target.closest('.entities');\n const stepElement = e.target.closest('.stepcontent');\n if (!entityElement || !stepElement) {\n return;\n }\n\n const pendingPromise = new PendingJS('tool_behat/steps:change');\n\n const entityData = await getGeneratorEntities(e.target.value);\n const {html, js} = await getRequiredFieldsContent(entityData);\n\n const stepRequiredFields = stepElement.querySelector('.steprequiredfields');\n if (stepRequiredFields) {\n await Templates.replaceNode(stepRequiredFields, html, js);\n } else {\n await Templates.appendNodeContents(stepElement, html, js);\n }\n pendingPromise.resolve();\n });\n};\n"],"names":["document","addEventListener","async","entityElement","e","target","closest","stepElement","pendingPromise","PendingJS","entityData","entityType","value","Ajax","call","methodname","args","entitytype","html","js","required","_entityData$required","length","Templates","renderForPromise","fields","Promise","resolve","getRequiredFieldsContent","stepRequiredFields","querySelector","replaceNode","appendNodeContents"],"mappings":";;;;;;;;4NA2DoB,KAEhBA,SAASC,iBAAiB,UAAUC,MAAAA,UAC1BC,cAAgBC,EAAEC,OAAOC,QAAQ,aACjCC,YAAcH,EAAEC,OAAOC,QAAQ,oBAChCH,gBAAkBI,yBAIjBC,eAAiB,IAAIC,iBAAU,2BAE/BC,iBAlCgBC,WAkCwBP,EAAEC,OAAOO,MAlClBC,cAAKC,KAAK,CAAC,CACpDC,WAAY,kCACZC,KAAM,CAACC,WAAYN,eACnB,IAH0BA,IAAAA,iBAmChBO,KAACA,KAADC,GAAOA,SAtBaT,CAAAA,0EACzBA,WAAWU,0CAAXC,qBAAqBC,OAMnBC,mBAAUC,iBAAiB,gCAAiC,CAACC,OAAQf,WAAWU,WAL5EM,QAAQC,QAAQ,CACnBT,KAAM,GACNC,GAAI,MAkBiBS,CAAyBlB,YAE5CmB,mBAAqBtB,YAAYuB,cAAc,uBACjDD,yBACMN,mBAAUQ,YAAYF,mBAAoBX,KAAMC,UAEhDI,mBAAUS,mBAAmBzB,YAAaW,KAAMC,IAE1DX,eAAemB"}
$string['aim']='This administration tool helps developers and test writers to create .feature files describing Moodle\'s functionalities and run them automatically. Step definitions available for use in .feature files are listed below.';
$string['allavailablesteps']='All available step definitions';
$string['errorapproot']='$CFG->behat_ionic_dirroot is not pointing to a valid Moodle app developer install.';
$string['errorbehatcommand']='Error running behat CLI command. Try running "{$a} --help" manually from CLI to find out more about the problem.';
$string['errorcomposer']='Composer dependencies are not installed.';
$string['errordataroot']='$CFG->behat_dataroot is not set or is invalid.';
@@ -7,8 +7,8 @@ Feature: Behat steps for interacting with form work
@javascript
Scenario: Test fields in containers
Given thefollowing"courses"exist:
|fullname |shortname |
|Course1 |C1 |
|fullname |shortname |summary |summaryformat |
|Course1 |C1|Red |1|
When Iloginas"admin"
And Iamon"Course1"coursehomepage
# Just get to any form.
@@ -17,11 +17,15 @@ Feature: Behat steps for interacting with form work
And Isetthefollowingfieldsinthe"Appearance""fieldset"tothesevalues:
|Showactivityreports |Yes |
|Numberofannouncements |1 |
And Isetthefollowingfieldsinthe"Description""fieldset"tothesevalues:
|Coursesummary |Green |
Then thefield"Showactivityreports"inthe"Appearance""fieldset"matchesvalue"Yes"
And thefield"Showactivityreports"inthe"Appearance""fieldset"doesnotmatchvalue"No"
And thefollowingfieldsinthe"region-main""region"matchthesevalues:
|Coursefullname |Frog |
|Numberofannouncements |1 |
|Coursesummary |Green |
And thefollowingfieldsinthe"region-main""region"donotmatchthesevalues:
|Coursefullname |Course1 |
|Numberofannouncements |5 |
|Coursesummary |Red |
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Jun Pataleta