# Lisael Box — committed defaults (target-independent).
# Target-specific overrides live in sdkconfig.defaults.esp32s3.
# Regenerate sdkconfig with:  idf.py set-target esp32s3 && idf.py reconfigure

# --- Partition table ---------------------------------------------------------
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"

# --- Logging / build ---------------------------------------------------------
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
CONFIG_COMPILER_OPTIMIZATION_PERF=y

# --- Bootloader size: keep the 2nd-stage bootloader inside iram_seg ----------
# Without these the bootloader links at -O2 (PERF) and pulls in the full
# libc printf machinery (svfiprintf ~9 KB) which overflows the 12 KB iram_seg.
# SIZE (-Os) reduces code but alone is not sufficient; dropping the log level
# from INFO to WARN removes the format-string I/O paths that pull libc stdio.
CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y

# --- FreeRTOS ----------------------------------------------------------------
# 1 kHz tick gives smoother LVGL animations (bubble breathing, transitions).
CONFIG_FREERTOS_HZ=1000

# --- mbedTLS / TLS -----------------------------------------------------------
# open-meteo.com is HTTPS; webradio streams may be HTTPS too. Use the global
# CA store bundle so we don't have to embed individual certs.
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y

# --- HTTP client -------------------------------------------------------------
CONFIG_ESP_TLS_INSECURE=n

# --- esp-box BSP -------------------------------------------------------------
# SD card mount point used throughout the firmware (see audio/sd_player.c).
CONFIG_BSP_SD_MOUNT_POINT="/sdcard"

# Polices LVGL utilisées par l'UI Lisael Box (titres date/heure, gros boutons)
CONFIG_LV_FONT_MONTSERRAT_28=y
CONFIG_LV_FONT_MONTSERRAT_48=y

# GCC 14 (esp 14.2) ajoute des warnings -Werror agressifs (array-bounds faux positifs)
CONFIG_COMPILER_DISABLE_GCC14_WARNINGS=y

# Diagnostic : console primaire sur USB-Serial-JTAG (logs boot+app sur l'USB-C),
# car l'UART0 par défaut n'est pas exposé sur le port USB de la carte.
CONFIG_ESP_CONSOLE_UART_DEFAULT=n
CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y

# --- FATFS long file names (covers podcasts/routines, manifestes lus par fopen) ---
CONFIG_FATFS_LFN_HEAP=y
CONFIG_FATFS_MAX_LFN=255

# --- LVGL stdio FS driver (covers podcasts via "S:" ; lettre 'S' = ASCII 83) ---
CONFIG_LV_USE_FS_STDIO=y
CONFIG_LV_FS_STDIO_LETTER=83

# --- mbedTLS : allocation externe + buffers dynamiques (évite le reset TLS PSRAM) ---
CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
CONFIG_MBEDTLS_DYNAMIC_BUFFER=y

# --- WiFi : buffers TX dynamiques (libère la RAM interne) ---
# NOTE IDF 5.4: ESP_WIFI_DYNAMIC_TX_BUFFER is excluded when
# SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y (set in sdkconfig.defaults.esp32s3).
# On this board PSRAM absorbs WiFi/LwIP buffers, so static TX (TYPE=0) is
# correct per Kconfig deps. TX_BUFFER_TYPE=1 is NOT achievable here.
# The line below selects the dynamic choice; Kconfig will silently revert to
# static when PSRAM+WiFi alloc is active — this is expected behaviour.
CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y

# --- Wi-Fi RAM tuning (BOX-3 internal RAM is tight; restore lost runtime tuning)
# esp_wifi_init NO_MEM came from too many static RX buffers in internal DRAM.
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=6
CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=24
CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=24
CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP_WIFI_RX_BA_WIN=6
CONFIG_MBEDTLS_DYNAMIC_FREE_CA_CERT=y
CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=4