electron-rare/RTC_BL_PHONE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ZeroClaw dual full-loop evidence run (2026-02-21) #24

New Issue
Closed
opened 2026-02-21 18:21:57 +00:00 by electron-rare · 2 comments
electron-rare commented 2026-02-21 18:21:57 +00:00 (Migrated from github.com)
Copy Link
Copy Source

Summary

  • Kill_LIFE coordination: PR #11 merged (watcher + realtime infra on main).
  • RTC preflight: -> OK.
  • RTC builds: Processing esp32dev (board: esp32dev; platform: espressif32; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (6.12.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

  • framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
  • tool-esptoolpy @ 2.40900.250804 (4.9.0)
  • toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
    LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
    LDF Modes: Finder ~ chain, Compatibility ~ soft
    Found 39 compatible libraries
    Scanning dependencies...
    Dependency Graph
    |-- ArduinoJson @ 7.4.2
    |-- AsyncTCP @ 3.4.10
    |-- ESPAsyncWebServer @ 3.10.0
    |-- Unity @ 2.6.1
    |-- Wire @ 2.0.0
    |-- WiFi @ 2.0.0
    |-- Preferences @ 2.0.0
    |-- SPIFFS @ 2.0.0
    |-- SD @ 2.0.0
    Building in release mode
    Retrieving maximum program size .pio/build/esp32dev/firmware.elf
    Checking size .pio/build/esp32dev/firmware.elf
    Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
    RAM: [= ] 13.6% (used 44476 bytes from 327680 bytes)
    Flash: [======= ] 67.9% (used 889397 bytes from 1310720 bytes)
    ========================= [SUCCESS] Took 8.36 seconds =========================

Environment Status Duration

esp32dev SUCCESS 00:00:08.355
========================= 1 succeeded in 00:00:08.355 =========================, Processing esp32-s3-devkitc-1 (board: esp32-s3-devkitc-1; platform: espressif32; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32-s3-devkitc-1.html
PLATFORM: Espressif 32 (6.12.0) > Espressif ESP32-S3-DevKitC-1-N8 (8 MB QD, No PSRAM)
HARDWARE: ESP32S3 240MHz, 320KB RAM, 8MB Flash
DEBUG: Current (esp-builtin) On-board (esp-builtin) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

  • framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
  • tool-esptoolpy @ 2.40900.250804 (4.9.0)
  • toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
  • toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5
    LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
    LDF Modes: Finder ~ chain, Compatibility ~ soft
    Found 40 compatible libraries
    Scanning dependencies...
    Dependency Graph
    |-- ArduinoJson @ 7.4.2
    |-- AsyncTCP @ 3.4.10
    |-- ESPAsyncWebServer @ 3.10.0
    |-- Unity @ 2.6.1
    |-- Wire @ 2.0.0
    |-- WiFi @ 2.0.0
    |-- Preferences @ 2.0.0
    |-- SPIFFS @ 2.0.0
    |-- SD @ 2.0.0
    Building in release mode
    Retrieving maximum program size .pio/build/esp32-s3-devkitc-1/firmware.elf
    Checking size .pio/build/esp32-s3-devkitc-1/firmware.elf
    Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
    RAM: [= ] 13.5% (used 44268 bytes from 327680 bytes)
    Flash: [=== ] 25.4% (used 848285 bytes from 3342336 bytes)
    ========================= [SUCCESS] Took 7.40 seconds =========================

Environment Status Duration

esp32-s3-devkitc-1 SUCCESS 00:00:07.396
========================= 1 succeeded in 00:00:07.396 ========================= -> PASS.

  • Zacus preflight/build/upload on FreeNove: PASS (Processing esp32dev (board: esp32dev; platform: espressif32; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (6.12.0) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

  • framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b
  • tool-esptoolpy @ 2.40900.250804 (4.9.0)
  • toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
    LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
    LDF Modes: Finder ~ chain, Compatibility ~ soft
    Found 39 compatible libraries
    Scanning dependencies...
    Dependency Graph
    |-- ArduinoJson @ 7.4.2
    |-- AsyncTCP @ 3.4.10
    |-- ESPAsyncWebServer @ 3.10.0
    |-- Unity @ 2.6.1
    |-- Wire @ 2.0.0
    |-- WiFi @ 2.0.0
    |-- Preferences @ 2.0.0
    |-- SPIFFS @ 2.0.0
    |-- SD @ 2.0.0
    Building in release mode
    Retrieving maximum program size .pio/build/esp32dev/firmware.elf
    Checking size .pio/build/esp32dev/firmware.elf
    Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
    RAM: [= ] 13.6% (used 44476 bytes from 327680 bytes)
    Flash: [======= ] 67.9% (used 889397 bytes from 1310720 bytes)
    ========================= [SUCCESS] Took 8.49 seconds =========================

Environment Status Duration

esp32dev SUCCESS 00:00:08.491
========================= 1 succeeded in 00:00:08.491 =========================, buildfs, upload/uploadfs).

Blockers observed

  • couldn't complete a full dual-loop in this session because all detected S3/bench routing could not be validated and some ports are busy () or command-incompatible.
  • Webhook traces from to Kill_LIFE follow are returning HTTP 408 in this environment (and producing gateway parse warnings in logs).

Proposed next run

  1. Connect distinct, known RTC A252 + S3 + bench serial targets (or confirm mapping), then rerun

  2. Re-run webhook traces after correcting follow response parsing / provider timeout handling.

Artefacts

  • :
## Summary - Kill_LIFE coordination: PR #11 merged (watcher + realtime infra on main). - RTC preflight: -> OK. - RTC builds: Processing esp32dev (board: esp32dev; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html PLATFORM: Espressif 32 (6.12.0) > Espressif ESP32 Dev Module HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b - tool-esptoolpy @ 2.40900.250804 (4.9.0) - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5 LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 39 compatible libraries Scanning dependencies... Dependency Graph |-- ArduinoJson @ 7.4.2 |-- AsyncTCP @ 3.4.10 |-- ESPAsyncWebServer @ 3.10.0 |-- Unity @ 2.6.1 |-- Wire @ 2.0.0 |-- WiFi @ 2.0.0 |-- Preferences @ 2.0.0 |-- SPIFFS @ 2.0.0 |-- SD @ 2.0.0 Building in release mode Retrieving maximum program size .pio/build/esp32dev/firmware.elf Checking size .pio/build/esp32dev/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 13.6% (used 44476 bytes from 327680 bytes) Flash: [======= ] 67.9% (used 889397 bytes from 1310720 bytes) ========================= [SUCCESS] Took 8.36 seconds ========================= Environment Status Duration ------------- -------- ------------ esp32dev SUCCESS 00:00:08.355 ========================= 1 succeeded in 00:00:08.355 =========================, Processing esp32-s3-devkitc-1 (board: esp32-s3-devkitc-1; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32-s3-devkitc-1.html PLATFORM: Espressif 32 (6.12.0) > Espressif ESP32-S3-DevKitC-1-N8 (8 MB QD, No PSRAM) HARDWARE: ESP32S3 240MHz, 320KB RAM, 8MB Flash DEBUG: Current (esp-builtin) On-board (esp-builtin) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b - tool-esptoolpy @ 2.40900.250804 (4.9.0) - toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 - toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch5 LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 40 compatible libraries Scanning dependencies... Dependency Graph |-- ArduinoJson @ 7.4.2 |-- AsyncTCP @ 3.4.10 |-- ESPAsyncWebServer @ 3.10.0 |-- Unity @ 2.6.1 |-- Wire @ 2.0.0 |-- WiFi @ 2.0.0 |-- Preferences @ 2.0.0 |-- SPIFFS @ 2.0.0 |-- SD @ 2.0.0 Building in release mode Retrieving maximum program size .pio/build/esp32-s3-devkitc-1/firmware.elf Checking size .pio/build/esp32-s3-devkitc-1/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 13.5% (used 44268 bytes from 327680 bytes) Flash: [=== ] 25.4% (used 848285 bytes from 3342336 bytes) ========================= [SUCCESS] Took 7.40 seconds ========================= Environment Status Duration ------------------ -------- ------------ esp32-s3-devkitc-1 SUCCESS 00:00:07.396 ========================= 1 succeeded in 00:00:07.396 ========================= -> PASS. - Zacus preflight/build/upload on FreeNove: PASS (Processing esp32dev (board: esp32dev; platform: espressif32; framework: arduino) -------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html PLATFORM: Espressif 32 (6.12.0) > Espressif ESP32 Dev Module HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 @ 3.20017.241212+sha.dcc1105b - tool-esptoolpy @ 2.40900.250804 (4.9.0) - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5 LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 39 compatible libraries Scanning dependencies... Dependency Graph |-- ArduinoJson @ 7.4.2 |-- AsyncTCP @ 3.4.10 |-- ESPAsyncWebServer @ 3.10.0 |-- Unity @ 2.6.1 |-- Wire @ 2.0.0 |-- WiFi @ 2.0.0 |-- Preferences @ 2.0.0 |-- SPIFFS @ 2.0.0 |-- SD @ 2.0.0 Building in release mode Retrieving maximum program size .pio/build/esp32dev/firmware.elf Checking size .pio/build/esp32dev/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 13.6% (used 44476 bytes from 327680 bytes) Flash: [======= ] 67.9% (used 889397 bytes from 1310720 bytes) ========================= [SUCCESS] Took 8.49 seconds ========================= Environment Status Duration ------------- -------- ------------ esp32dev SUCCESS 00:00:08.491 ========================= 1 succeeded in 00:00:08.491 =========================, buildfs, upload/uploadfs). ## Blockers observed - couldn't complete a full dual-loop in this session because all detected S3/bench routing could not be validated and some ports are busy () or command-incompatible. - Webhook traces from to Kill_LIFE follow are returning HTTP 408 in this environment (and producing gateway parse warnings in logs). ## Proposed next run 1. Connect distinct, known RTC A252 + S3 + bench serial targets (or confirm mapping), then rerun 2. Re-run webhook traces after correcting follow response parsing / provider timeout handling. ## Artefacts - - - :
electron-rare commented 2026-02-21 19:32:37 +00:00 (Migrated from github.com)
Copy Link
Copy Source

Duplicate of #23. RTC hardware blocker is now tracked there with serial mapping + missing benchmark/bench endpoint details.

Duplicate of #23. RTC hardware blocker is now tracked there with serial mapping + missing benchmark/bench endpoint details.
electron-rare commented 2026-02-21 19:32:38 +00:00 (Migrated from github.com)
Copy Link
Copy Source

Deduplicated as #23

Deduplicated as #23
Sign in to join this conversation.
No Branch/Tag Specified
Branches Tags
Labels
Clear labels
bug
Something isn't working
 codex
documentation
Improvements or additions to documentation
 duplicate
This issue or pull request already exists
 enhancement
New feature or request
 good first issue
Good for newcomers
 help wanted
Extra attention is needed
 invalid
This doesn't seem right
 question
Further information is requested
 wontfix
This will not be worked on
No Label
Milestone
No items
No Milestone
Projects
Clear projects
No project
Assignees
Clear assignees
electron (Clément Saillant)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: electron-rare/RTC_BL_PHONE#24
Delete Branch "%!s()"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?