68673202eb
Add option to supress the tool length offset
2019-09-06 12:29:25 +01:00
c3e7d7c73f
Add tool height offsets to Linuxcnc_post
2019-09-06 12:29:25 +01:00
f22ae848ea
Fix misc. typos, whitespace, and http:// to https:// issues
2019-09-03 11:11:43 -03:00
00c016a967
fix bug in Path module: str has no attribute UserString
2019-09-01 22:14:53 +02:00
dccf8484cc
Merge branch 'master' into feature/coolant-management
2019-08-29 09:46:32 -05:00
09a1be0894
Update the adaptive form so the widgets align.
2019-08-28 20:17:57 +01:00
0484141a57
Add coolant to the linuxcnc_post
2019-08-28 19:40:09 +01:00
32509136ee
Handle setting the coolant mode on the setupsheet
2019-08-28 19:40:09 +01:00
2996b815ae
Handle selecting the coolant mode in the forms
2019-08-28 19:40:08 +01:00
bdcccc08b1
Add coolant feature to Ops
2019-08-28 19:40:08 +01:00
8b0e244ed4
Add a coolant feature to the base PathOP
2019-08-28 19:40:08 +01:00
5c0fbe75e4
Merge branch 'master' into feature/tooltable
2019-08-26 21:30:16 +01:00
27d3b57b7b
clean up unused code
2019-08-26 21:27:06 +01:00
990db1a316
Return document jobs for copy commands
...
Return the document jobs when creating tool controllers.
2019-08-26 21:24:44 +01:00
48e91bdc79
Merge pull request #2386 from IMbackK/DrillRetractHight
...
[Path] Drill Ui cleanup
2019-08-26 15:08:11 -05:00
8faf893f98
Import and opening current tool tables
...
Handle opening and importing current (pre-0.19) tool tables.
2019-08-26 20:19:12 +01:00
9a5766e451
Check there is preference data before reading it
2019-08-26 07:59:09 +01:00
3aec5ca8b8
Make sure the tool list get cleared
...
Ensure the tool list gets clear when all tooltables are deleted.
2019-08-26 07:59:09 +01:00
51f96a40fc
Allow multiple Tool Tables
...
Allow path to hold multiple tool tables
2019-08-26 07:59:09 +01:00
31d6d5fa70
Cleaned up grbl_post and added tool-change option, which was lost in last update
2019-08-22 19:17:29 +02:00
221893eeeb
Fixed PathHelix assert statements
2019-08-22 18:02:49 +02:00
32b0f86167
Ensure the tool parameters are saved
...
Ensure the tool parameters are saved to the tool table
2019-08-17 19:51:45 +01:00
d93259e238
Path changes
...
* Relaxed valid base shape requirement, as long as it can return a
shape using part.getShape()
* Improve ViewProviderPath performance by sharing the same selection
observer
* Relocate libarea binary installation
2019-08-17 15:15:48 +02:00
e8f918927b
Merge pull request #2412 from mlampert/feature/misc-improvements
...
Path: Feature/misc improvements
2019-08-16 15:49:31 -05:00
cb20414aeb
Merge pull request #2426 from dubstar-04/Fixture-Travel-Height
...
[Path] Make the z traverse height equal to the stock z max plus the clearanc…
2019-08-16 14:24:23 -05:00
2cb77a28f4
Merge branch 'master' into feature/misc-improvements
2019-08-16 13:38:10 -05:00
cce9d07216
Make the z traverse height equal to the stock z max plus the clearance height. This should help avoid fixtures and such.
2019-08-14 09:30:55 +01:00
cf4804ebc0
Improve irregular hole detection.
2019-08-11 20:56:17 +02:00
3148d92d6e
Changed hole diameter detection to avoid tessilation inaccuracies in more cases.
2019-08-11 17:16:22 +02:00
1800f29f44
Set transparency of base model clones to 80
2019-08-10 15:26:24 -07:00
1d4b035459
Auto complete job template name if naming convention isn't met
2019-08-10 15:26:24 -07:00
4f8af51864
Restore R parameter behavior
2019-08-08 19:29:26 +02:00
c8fda889a2
Peck retract height default changed from 10mm to opStartDepth+1
...
Peck depth default changed to tool dia*0.75
Fields changed to QuanitiySpinBoxes
Insure travel between regions is always performed at safe height
Make Peck and Dwell exclusive in GUI
Restore name of RetractHeight
Use SetupSheet for all numerical properties
2019-08-08 10:38:30 +02:00
47f1213f7c
Re-enable Final Depths below hole bottom
...
Also some flake8 cleanup and removal of unnecessary comments and code.
2019-07-26 14:17:57 -05:00
e28ec225f5
Merge pull request #2379 from Russ4262/patch-1
...
[Path] MillFace: SetupProperties() syntax correction for broken Job GUI fix
2019-07-26 13:51:04 -05:00
730efb9da6
Fix: SetupProperties() syntax correction
...
Job GUI broken due to SetupProperties() syntax error
2019-07-26 11:18:49 -05:00
f2221e8d5a
ProfileFaces: fix "HandleMultipleFeatures" set to individually
...
Summary condition produced error and no paths; corrected subshape passed to getEnvelope().
Removed unnecessary comments.
Simplified debug level setting.
2019-07-25 14:54:22 -05:00
d8c8af04b3
Merge pull request #2366 from Russ4262/3D_Pocket_upgrade
...
[Path] 3D Pocket: upgrade to adaptive start and finish
2019-07-24 08:21:52 -05:00
f1fb1686a3
Merge pull request #2368 from Russ4262/patch-1
...
[Path] Auto prefix job template filename on save
2019-07-24 08:21:05 -05:00
6ddab6e20c
MillFace: add feature - exclude raised areas
...
new feature enabled by name, excludes raised areas inside face, but mills over pockets and holes.
Apply 'ExcludeRaisedAreas' to all BoundaryShapes
Add algorithm to apply 'ExcludeRaisedAreas' to Stock and BoundBox
2019-07-23 04:54:01 -05:00
2212a4e4dc
Auto prefix job template filename
...
Code checks for user-entered prefix of "Job_" (case-insensitive). If missing, prefix is added before saving template.
2019-07-22 01:22:51 -05:00
082c44464b
3D Pocket: upgrade to adaptive start and finish
...
apply algorithms to some pockets to eliminate air milling and adapt start and finish heights and paths to top and bottom of certain pockets.
Depth correction & flake8 formatting
use list to track successive cuts so variations of settings are tracked and applied correctly
Apply faceType specific depth calculations
Planar face requires one depth source, non-planar requires a different source.
2019-07-21 21:21:24 -05:00
6053c08c2c
Downgrading debug msg
2019-07-14 22:25:57 -07:00
931aa851ba
Return diameter 0 for invalid holes in order to let the UI initialize completely
2019-07-14 22:24:01 -07:00
f9e23d21e3
Make Helix op robust against features that don't exist anymore
2019-07-14 21:30:38 -07:00
ea5a1393f3
PathHelix: Add simple x,y path sorting
...
Same PathUtils.sort_jobs() method copied from PathDrilling
Change feedback comment to debug category
2019-07-12 10:05:18 -05:00
4e7e9a55e7
4th-axis rotation analysis Z-orientation fix
...
orientation == 'Z' was failing in some cases due to undefined "axis" variable. "axis" declaration was commented out in an earlier commit. Declaration now restored for all orientations.
2019-07-12 01:17:26 -05:00
752e74c396
Misc. typo fixes
...
Found via `codespell -q 2`
2019-07-11 19:17:07 +02:00
fb0a5c8fa5
pylint3 cleanup of (most) post processors
2019-07-09 21:12:46 -07:00
5659a0ecc0
Cleaned up Path op utilities
2019-07-09 19:48:26 -07:00
Daniel Wood