diff --git a/ArduinoProps.zip b/ArduinoProps.zip
index 2362676..840ffa0 100644
Binary files a/ArduinoProps.zip and b/ArduinoProps.zip differ
diff --git a/README.md b/README.md
index 8bc34b4..efd58f5 100644
--- a/README.md
+++ b/README.md
@@ -47,7 +47,7 @@ Reading [EXAMPLES.md](EXAMPLES.md) will be helpful.
 
 The *ArduinoProps library* allows to build *escape room 2.0 props* easily with Arduino and particularly with Arduino Yun or Arduino Mega 2560 + Dragino Yun shield however it works with Ethernet and Wifi shields too.
 
-The *ArduinoProps library* relies on *<a href="https://github.com/knolleary/pubsubclient" target="_blank">Nick O'Leary PubSubClient</a>***** library for MQTT. MQTT is a lightweight
+The *ArduinoProps library* relies on *<a href="https://github.com/knolleary/pubsubclient" target="_blank">Nick O'Leary PubSubClient</a>* library for MQTT. MQTT is a lightweight
 ![](help/install-shot.png)
  publish/subscribe messaging protocol designed for M2M (machine to machine) telemetry in low bandwidth environments. 
 
@@ -211,7 +211,7 @@ You can build escape room 2.0 Arduino-based props just with Nick O'Leary PubSubC
 With *ArduinoProps library*:
 - create connected props quickly thanks to the application protocol and examples
 - targetted for escape room props, *ArduinoProps library* can be used for any IoT project
-- re-use your code when creating new escape rooms****
+- re-use your code when creating new escape rooms
 - rely on *ArduinoProps library* robustness: for example, ***the library handles the Arduino Yun Bridge transfer size limitation by smartly splitting large messages (only) when necessary***.
 
 **Note:** sending too large messages to Arduino Bridge breaks the Arduino sketch. *ArduinoProps library* prevents this crash case.
diff --git a/examples/BlinkOnBridgeProps/BlinkOnBridgeProps.ino b/examples/BlinkOnBridgeProps/BlinkOnBridgeProps.ino
index 9129bd8..378935d 100644
--- a/examples/BlinkOnBridgeProps/BlinkOnBridgeProps.ino
+++ b/examples/BlinkOnBridgeProps/BlinkOnBridgeProps.ino
@@ -8,7 +8,7 @@
    Copy and change it to build your first Arduino connected props, you will
    only be limited by your imagination.
 
-   Requirements: 
+   Requirements:
    - install ArduinoProps.zip library and dependencies (https://github.com/fauresystems/ArduinoProps)
 */
 #include <Bridge.h>
@@ -26,10 +26,14 @@ BridgeProps props(u8"Arduino Contrôleur", // as MQTT client id, should be uniqu
 
 PropsDataLogical clignoter(u8"clignote", u8"oui", u8"non", true);
 PropsDataLogical led(u8"led");
+PropsDataText rssi(u8"rssi");
 
 void clignote(); // forward
 PropsAction clignoteAction = PropsAction(1000, clignote);
 
+void lireRssi(); // forward
+PropsAction lireRssiAction = PropsAction(30000, lireRssi);
+
 void setup()
 {
   Bridge.begin();
@@ -37,11 +41,14 @@ void setup()
 
   props.addData(&clignoter);
   props.addData(&led);
+  props.addData(&rssi);
 
   props.begin(InboxMessage::run);
 
   pinMode(LED_BUILTIN, OUTPUT); // initialize digital pin LED_BUILTIN as an output
 
+  lireRssi();
+
   // At this point, the broker is not connected yet
 }
 
@@ -52,6 +59,7 @@ void loop()
   led.setValue(digitalRead(LED_BUILTIN)); // read I/O
 
   clignoteAction.check(); // do your stuff, don't freeze the loop with delay() calls
+  lireRssiAction.check();
 }
 
 void clignote()
@@ -62,6 +70,20 @@ void clignote()
   }
 }
 
+void lireRssi()
+{
+  Process _process;
+  _process.runShellCommand("cat /proc/net/wireless | awk 'NR==3 {print $4}'");
+  while (_process.running());
+  String b;
+  while (_process.available() > 0) {
+    char c = _process.read();
+    b += c;
+  }
+  b.trim();
+  rssi.setValue(b + " dBm");
+}
+
 void InboxMessage::run(String a) {
 
   if (a == u8"app:startup")
diff --git a/keywords.txt b/keywords.txt
index f122c3f..f14911b 100644
--- a/keywords.txt
+++ b/keywords.txt
@@ -27,6 +27,7 @@ InboxMessage			KEYWORD1
 begin	KEYWORD2
 addData	KEYWORD2
 loop	KEYWORD2
+resetMcu	KEYWORD2
 run		KEYWORD2
 sendAllData		KEYWORD2
 sendDataChanges	KEYWORD2
@@ -37,6 +38,9 @@ sendOmit	KEYWORD2
 sendOver	KEYWORD2
 sendProg	KEYWORD2
 sendRequ	KEYWORD2
+inbox		KEYWORD2
+outbox		KEYWORD2
+clientId	KEYWORD2
 reset	KEYWORD2
 disable	KEYWORD2
 enable	KEYWORD2